IPS device manager - config guide.

hi,
Can I get a link to download ips device manager configuration user admin guide.
Which can help us to configure / tune IPS-IDS. ( for any series )
Please share the link.
Thanks in advance.
Subodh

You can look at this url on CCO for downloading 6.0 version IDM configuration/user guide :
http://www.cisco.com/en/US/docs/security/ips/6.0/configuration/guide/idm/idmguide.html

Similar Messages

  • Solution Manager Config Guide

    Hi Gurus,
    Is there anyone here who have Configuration Guide Document for Solution Manager?I really need the document. Thank you
    - Aleluya -

    Hi,
    you sould find the SAP Solution Manager documentation at <http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000646691&_SCENARIO=01100035870000000112&_OBJECT=011000358700000325732008E>
    A good strategy for the configuration of SAP Solution Manager is following the SAP reference IMG in transaction SPRO.
    Best Regards, Vital

  • Treasury and risk Managament Configuration Guide

    Hi Friends,
    Can you please provide me the treasury and risk management config guide for the following :-
    a. Foreign exchange forward cover
    b. MTM Report Config
    c. Financial Postings for the foward cover.
    d. Swapping of forward cover.
    Is treasury part of financial supply chain management, also let me know whether it is a SAP license product or part of normal standard product.
    Please forward me the same to [email protected]
    Thanks in advance.
    Deepak

    Hi deepak,
    Check out these links
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIARCR/FIARCR.pdf
    Assign points if useful
    Regards
    genie

  • The Ultimate Guide to Resolving Profile and Device Manager Issues

    The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
    Hello,
    I have been plagued with Profile Manager and Device Manager issues since day one.
    I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
    I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
    In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
    Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
    (Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the  operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile  and Device Manager may need a Code Signing Certificate.
    The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
    The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
    I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
    I shall outline a sensible strategy:
    1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
    2. Start the server fom the clone and shut down ALL services.
    3. It may be sensible to set up a root user access.
    4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
    5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
    6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
    In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
    Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
    Erase database:
    sudo /usr/share/devicemgr/backend/wipeDB.sh
    7. Note your Directory (diradmin) password for later if you want to re-use it.
    8. Open Open Server Admin and demote OD Master to Standalone Directory.
    9. In Terminal delete the old Certificate Authority
    sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
    This step is crucial because else re-building you OD Master will fail.
    9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
    10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
    11. Go back to Workgroup Manager and re-import users and groups.
    NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
    12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
    If the home directory has not been defined you cannot login from a network account.
    13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
    sudo serveradmin stop devicemgr
    sudo serveradmin start postgres
    sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
    sudo serveradmin start devicemgr
    14. You can now switch back on your services, including Profile Manager.
    In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
    15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
    16. Check that Apple Push Notifications are set.(you easily check if they are working later)
    17. You may want to re-boot OS Server from the clone now.
    18. After re-boot open Server App and check that your server is running well.
    19. Delete all profiles in System Preferences -> Profiles.
    19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
    20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name  should read "Trust Profile for...) and underneath in green font "Verified".
    21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
    22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
    Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
    Now enjoy Profile and Device Manager !
    Regards,
    Twistan

    HI
    1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
    You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
    2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
    You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
    also make sure that u have the message processing role
    Hope it clarifies ur doubt and resolve ur prob
    Regards
    Prakhar

  • IPS 5.0 Device Manager

    Has anyone had any issues with the new IPS 5.0 Device Manager. On the majority of my IPS Sensors, after the initial login and launch of the application, it just hangs at the 77% point of the parsing configuation stage.
    Anyone had similar issues?

    We saw this all of the time in testing when the JRE was not configured with the extra memory.
    We also saw this when the JRE memory was changed, but there was still a JRE running on the machine.
    All JREs have to be stopped in order for the new setting to take affect.
    So be sure to close all explorer and other web browsers after editing the JRE settings. Or better yet reboot your PC to ensure all JREs are stopped so the new settings will take affect.
    You might also see this issue if you try running multiple IDMs. Connecting to the same sensor, or even connecting to multiple sensors. Each IDM instance will need 256 Meg of memory.
    I used to see it when I used the same IE window to start different IDMs on the same or another sensor.
    Once IDM starts be sure to close the original window where the connection was made. You will see this wording in the window: "Close this window and open a new browser window to continue web browsing" This includes even connecting back to the same sensor to start IDM again. Close that window and open a brand new window if you need to start IDM again.
    To do some further debugging you might also consider configuring your JRE to open the console.
    Go to Control Panel.
    Double Click Java Plug-in
    On the Basic Tab click "Show Console"
    Click Apply
    Now connect to the sensor.
    A Java Console window should popup.
    Keep an eye out for any errors (like out of memory for example).
    You will see some debug messages every now and then, but any errors could give a clue as to what is going wrong.
    You can also execute "m" in the Java console to print the current memory statistics.
    You will be able to see how much memory the JRE is allocating and how much is free. NOTE: When the percent Free starts getting Low then it will allocate additional memory up until the full 256 MB is allocated.
    If the free memory ever drops to 0% with the full 256 MB allocated, then you've come across an issue. Close down the IDM and the browser you started it from. Then open a brand new browser window and connect back to the sensor. Execute "m" in the console window and ensure that the total memory is fairly low when IDM initially begins to open, otherwise another JRE instance may be using up the memory.
    If your PC itself is low on memory then it is also possible that there is no memory left on the PC for Java to allocate.
    NOTE: If you don't want the console window to always popup you can leave it Hidden by default and instead just Right Click the Java Icon in your System Tray and select Open Console when you want to look at the Java console.

  • Device Manager for IDS/IPS 4215

    I am trying to view my IDS throught the web browser Device manager but am having trouble. I configured the sensor through the CLI. We are using the standard/default port 443. When I enter the https://ip address all I get is "can't display web page" . Does anybody have any tips or something I might have overlooked.
    Thanks

    Do you have Java runtime enviroment enabled
    Maybe IDM access is not working thanks Java problem
    Try following download java 1.4.2_07
    https://sdlc5b.sun.com/ECom/EComActionServlet;jsessionid=5BED10CBB25347782DC40CB6AE5ECDF1
    Download and install
    M.

  • ACE30 - Accessing the ACE Applicance Device Manager

    Hi...
    I've got basic connectivty to our ACE30 module and when I try connecting to the management IP address (attached to the Admin context), I see a very basic GUI which only lists the CSM to ACE config conversion tool.  I don't see a GUI as detailed in the document:
    http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA1_7_/configuration/device_manager/guide/UG_over.html#wp1072950
    How do I get the ACE Applicance Device Manager GUI working so that I can then configure real servers, serverfarms etc rather than via the GUI?
    Having read through copious amount of documentation I can't seem to find a refrence that would help here.  This should be a fairly straight forward exercise - do I need to install some other software to get the full fledged GUI working?
    thanks
    Sheldon

    Only the ACE 4710 appliances have the GUI.   If you are looking for a GUI for the ACE30 module you will need to use Cisco Application Network Manager (ANM)   It will provide the GUI for the ACE30 to be able to configure it.   As you have seen, only the conversion tool is available on the module.

  • Configuring multiple IPS devices at the sametime

    Hi All,
              I have 10 new IPS devices, i have to do the coniguration on all the 10 devices, the configuration on all the 10 devices wil be same........Is there an easy way to configure multiple devices at the same time (is there any script that can do that) or is there any way to automate this task?
    Thanks,

    Another option is to configure one sensor the way you want, as with Bob's recommendation.  Then copy the current configuration to a remote server (FTP, SCP, HTTP or HTTPS):
    copy current-config ftp:
    Follow the prompts to provide the necessary credentials.  (This example is using a FTP server)
    Next perform the minimal host configuration on each remaining sensor (IP address, access-list), and then copy the saved configuration to each sensor:
    copy ftp: current-config
    Again, provide the necessary credentials as prompted.
    You will then be prompted as to whether to overwrite the host settings; choose not to do so.  This should implement all other sensor options you had configured on the initial sensor.
    Also, as Bob mentioned, this method is sufficient for initial configuration; long-term policy management can be challenging with these processes.  If you will be looking to perform frequent and consistent signature tuning across all ten sensors you may wish to consider making use of Cisco Security Manager which allows you to create a shared signature policy.  This allows you to make the changes to one IPS policy and deploy that policy to all ten sensors concurrently.
    Scott

  • How do I reformat an IPod Touch for Windows that has been formatted for a Mac?  All instructions I have been able to find use ITunes or Device Manager to reformat.  My IPod is not being recognized by ITunes or in Device Manager.

    I have an IPod Touch that has been formatted for a Mac.  All instructions I have been able to find use ITunes or Device Manager to reformat the device for Windows.  This cannot be done if Windows doesn't recognize the device.  Is there another way to set the device back to the factory settings directly on the device without using ITunes?

    Ipod touch is not formatted one way or the other at all.
    Just sync it to the new computer using itunes.
    iPod touch User Guide (For iOS 5.1 Software)

  • SAP Sol Man 4.0 Config guide

    Can some one tell me where i can find SAP Solution Manager 4.0 config guide?
    Also can some one send me any material for Sol Man certification exam.
    will reward points
    thanks
    PR

    Hi PR,
    please have a look at: www.service.sap.com/instguides -> SAP Components -> SAP Solution Manager -> Release 4.0 for the Configuration Guide and other related Guides such as the Master Guide etc... Here you will also find links to other material.
    For configuring the Solution Manager you need to go to transaction SPRO in your SolMan. Here you'll find the configuration of the Basic Setting, whcih you need to get it running and the scenariospecific settings, which are relevant for the scenarios.
    Best regards,
    Annett

  • Adobe Premiere elements 10 has lost HDV camera in device manager..help

    Our Sony V1E camera was recognised in Adobe Premiere Elements and we could capture footage fine.. suddenly the device manager can't see the camera..but ..strangely..it can play and rewind the camera etc etc.. just cannot capture?? waht has gone wrong?? It's connected with firewire.
    Help?

    All our configs are for Pal HDV 1080i mode in camera and Adobe element project preset is Pal HDV HDV 1080i 25 to match camera.
    The elements device manager can shuttle the tape in the camera forward/back etc but cannot capture in the HDV capture mode
    If we put the device manager into DV mode it will capture the footage even though the camera is in HDV mode?
    Previously the device manager captured the HD footage and recognised the camera itself in the window and suddenly it doesnt recognise the camera in that window and can only capture HDV footage if we go to capture mode for DV camera where it only recognises a Micorsoft DV camera VC generic setting??
    That tells me that the port and cable are working perfectly.
    Could a setting in Premiere elements be wrong??    DV/HDV device control is selected in preferences. HD anomorphic is also selected.

  • 1394 net adapter not working in device manager

    I,m running the KT4 Ultra  with fire wire on board with XP prof. Every thing is working fine except in device manager I have two listings for the 1394 net adapter.The first has the yellow explantion mark, Code ten."this device won't start. And the second is working but listed as 1394 net adapter #2. On the adapter it has two bhig ports and one small port.I quess the small port is for cam corders. Can I disablr the first 1394 in device manager and just keep the second one. I don't have and fire wire cables so I don't know if the adapter is working on all ports. Thanks Bruce
    KT4 Ultra/Lan
    2800 Barton/333
    ATI 9700pro
    Creative augll plat.
    512 Kingston 2700 DDR

    BIOS->Advanced- see if there is tab like Intel Ethernet ........... Go into it if it is there, and see if it shows if adapter is connected or not (Not link connection as this will bne disabled)
    Take adapter out and see if it has bent pins, as this might bre causing the issue. If all fine, get it bnack into the slot for it and take motherboard out of the case and test on non conductive material (motherboard box is ok, NOT Anti conductive bag).  Also >>Posting Guide<<, and you could also try second BIOS (little switch, flip it when PC is OFF)

  • Xpower ac adapter not showing in device manager

    Help!!
    this is my third board and have just reassembled this board yet again trying to get the Bluetooth/wifi adapter to work yet again.
    The adapter is not showing in board explorer or device manager. I have reseated this numerous times and have tried a different adapter with zero luck. I sthere a bios setting to enable this? I am currently using bios 1.5.
    Any help would be greatly appreciated 

    BIOS->Advanced- see if there is tab like Intel Ethernet ........... Go into it if it is there, and see if it shows if adapter is connected or not (Not link connection as this will bne disabled)
    Take adapter out and see if it has bent pins, as this might bre causing the issue. If all fine, get it bnack into the slot for it and take motherboard out of the case and test on non conductive material (motherboard box is ok, NOT Anti conductive bag).  Also >>Posting Guide<<, and you could also try second BIOS (little switch, flip it when PC is OFF)

  • HP Envy dv4 Windows 8- HP TrueVision HD Webcam not working or showing up in device manager

    The subject is fairly self explanatory, I am using a HP Envy dv4 on Windows 8 and trying to use the 'HP TrueVision HD ' Webcam which is not working. When I went to find it in the device manager it was not present. I have restarted my computer already.
    Thanks

    Hey @kleinhansjy ,
    Welcome to the HP Forums!
    I understand the webcam in your ENVY dv4 notebook is not working.
    Can you tell me if the webcam worked previously, has never worked, or stopped working after updating to Windows 8 (if the notebook did not come with Windows 8 pre-installed).
    It would also help to know which exact notebook model you have. For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
    While I await your answers please try following these troubleshooting guides:
    Webcam Troubleshooting (Windows 8).
    Fixing Webcam After Changing the Operating System.
    Some of the steps may not apply if the webcam is not detected in Device Manager. You may need to show the hidden devices by clicking View > Show hidden devices. You might find the webcam is listed as an Unknown device in the Other devices category.
    I look forward to your reply!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Asking for Device Manager to be installed.​..

    I have just installed BB Desktop Software. Never had a problem before, but a dialog comes up saying: Application Loader Wizard requires BlackBerry Device Manager  to be installed. Call customer support for assistance. Help!

    Hi and Welcome to the Forums!
    Since there seems to be so much going on, I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM DTM software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    3) Get a fresh download of the RIM DTM software:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    5) Install DTM to your PC
    6) Install (also to your PC), the device OS package
    7) Start whatever you were attempting over again.
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for