IPS software module management

Is it posible to manage (over IP) IPS software module (ASA5555-X) in a different way than through ASA management interface or I have to use mgmt int if I want to use IPS?

If you want to use the GUI, you need to use the management interface.
You can ssh (or telnet - not recommended as it is insecure) into the ASA from any interface where you have enabled ssh access and session to the module to configure from CLI (painful but possible to do).

Similar Messages

Trying to enable/configure an IPS software module on ASA 5545

I've been trying to get our IPS module working on a pair of ASA 5545-X with nothing but grief. First we lost our license paks, then I found then and genned the license files FALCONXXXX.LIC. Cisco told me that I have to config the CX module and use Prime Security Manager to load the *.lic files.
Finally get that done but the IPS module is still inactive. Okay missing IPS image on disk0: copy that on to ASA and try loading it using the
sw-module cmds and return error is can't load image another service is running
So do I have to stop the CX after all this Prime Security manager stuff? I can't use ASDM since it only wants an activation key (hex) which I don't have..
Ideas? suggestions?
od Card Type Model Serial No.
0 ASA 5545-X with SW, 8 GE Data, 1 GE Mgmt ASA5545 FCH1831JCXB
ips Unknown N/A FCH1831JCXB
cxsc ASA CX5545 Security Appliance ASA CX5545 FCH1831JCXB
sfr Unknown N/A FCH1831JCXB
Mod MAC Address Range Hw Version Fw Version Sw Version
0 7c0e.ceee.d8eb to 7c0e.ceee.d8f4 1.0 2.1(9)8 9.2(2)8
ips 7c0e.ceee.d8e9 to 7c0e.ceee.d8e9 N/A N/A
cxsc 7c0e.ceee.d8e9 to 7c0e.ceee.d8e9 N/A N/A 9.2.1.1
sfr 7c0e.ceee.d8e9 to 7c0e.ceee.d8e9 N/A N/A
Mod SSM Application Name Status SSM Application Version
ips Unknown No Image Present Not Applicable
cxsc ASA CX Up 9.2.1.1
sfr Unknown No Image Present Not Applicable
Mod Status Data Plane Status Compatibility
0 Up Sys Not Applicable
ips Unresponsive Not Applicable
cxsc Up Up
sfr Unresponsive Not Applicable
Mod License Name License Status Time Remaining
ips IPS Module Disabled perpetual

The thing to keep in mind is what IPS you have purchased. There are three distinct types.
The classic IPS uses the IPS software module. That uses a subscription that is bound to your ASA via your Smartnet support and does not require an license file once the software module is activated using an activation key.
The CX module also has an IPS license option. That is configured from within the PRSM interface and will only be visible in PRSM - not in the "show module" output. Your output indicates the CX module is installed so if you have that IPS license type for CX (i.e. the FALCONXXXX.LIC) you need to follow the CX quick start guide and apply the license file via the PRSM GUI.
There's also an IPS license type for the sfr (FirePOWER service module) which is installed via the separate FireSIGHT Management Center and applied to the module remotely.

IPS network Module, need help!!!

Folks,
I recently installed IPS network module in my 3662 router. I am having problems making the IPS log anything.
When i access the web interface of the IPS, i see only 1 interface available under virtual sensor, the interface is fast 0/1. and the media type it shows is Backplain.
I am confused, i thought that fast 0/1 on the IPS network module was the management interface??? on the IPS?
Why don't i see another interface that is connected to the backplain of the switch???
Many thanks

There are 2 interfaces on the NM-CIDS.
In version 5.0 they are called:
FastEthernet0/0 and FastEthernet0/1
FastEthernet0/0 is the external copper interface that you can plug a cable in to. It is the command and control port for managing the NM-CIDS. It can not be used for monitoring (can not be applied to the virtual sensor)
FastEthernet0/1 is the backplane interface. It receives packets from the router for monitoring. This is the interface that should be applied to the virtual sensor.

Business Catalyst Folders and Module Manager Feature

Hi,
I have created a Business Catalyst Site using the extension in Dreamweaver. I am a new Creative Cloud member. I have also viewed many tutorials.
I don't seem to have the full range of folders in the test temporary BC site I have created I dont recall seeing these folders when I created the site. I am missing;
Web apps
Modules
CRM
E- Commerce
E-Mail Marketing
I was particularly interested in module templates for photo galleries but I don't seen to have this feature. When I am in the BC Admin Console viewing a web page and select the module manager (blue circle with a + sign) I was expecting a list to appear on the right hand side.
The grey module manager button also does not seem to be available.
I would rather not create a new site as I have done a fair bit of editing. Is there anything I can do ?
Kind Regards, Matt.
http://craftime-bs6.businesscatalyst.com/

Hi,
The current site is still in trial I just moved it to a higher plan for you to test. In order to use an actual live payment gateway you must upgrade the site from trial to a purchased "webCommerce" plan.
I believe there may be some confusion on the type of site plan you get along with your CC subscription. Please note the 5 entitled site will come under the "webBasic" plan and for higher plans you'll need to purchase additionally.
Reference: http://forums.adobe.com/docs/DOC-2153
If still needing further guidance or if wanting to purchase a higher plan please reach out to our direct support to assist with your account/billing query.
- http://helpx.adobe.com/business-catalyst.html
Thanks,
-Sidney

Software / class management

Hello,
i have done one project in lvoop : a T° calibration software
now i have another one with humidity but software are used separatly
I see i could reuse most of the first one but i don't know how to manage it :
1) i can use the same project but softwares are distinct and T° classes and devices linked to will be loaded for nothing
or maybe i could load them dynamically but for the moment it isn't the case
2) or creating a differente project so how can i reuse classes used in the first one
and how to do when changing class parametes or functions. how to have shared classes
i think the first solution could be the best way but as i am new to sofware management
i would like to collect points of view of experimented developers
What do you think about ?
Best regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

Hi tinnitus,
It is quite hard to answer your
question....
In fact usually in Object Oriented you should think about the
maintenance and upgradability of your application.
What I can suggest you is
to create a general class (the parent class) then different children depending
what type of measurement or sensor you use. Then you can implement your code
using Dynamic Dispatch (the VI Server for LVOOP ;-). So your code will
automatically invoke the proper method depending the class he's got as input.
Using this approach you can have a very generic top level VI calling
dynamically the class children.
A dynamic dispatching subVI
has some small overhead when LabVIEW looks up which subVI to invoke. The
overhead is constant. It does not increase as you add more classes or as you
add more dynamic VIs to a class. There can be a performance hit if the subVI
call has to make extra copies of the parameters to match the functionality of
the actual subVI LabVIEW invokes. You can avoid this by wiring the input front
panel terminals to output front panel terminals even on dynamic VIs that you
never expect to call (for example, parent VIs that exist only to
define the connector pane for children to override). You can also use Data By
Reference in you class to optimize memory management.
Feel free if you have any
further question.
upgradability
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/

Software Configuration Management for ABAP Development ?

Hi,
we are a software company selling a Data Capture Solution.
For this, we are currently in the process to develop an interface for transferring the extracted data into a customer's SAP R/3 system.
Since we want to develop this interface following certain software engineering principles, we are looking for a way to solve certain simple common Software Configuration Management issues, such as:
- Object Versioning (Similar to file versioning in classic software development): That means being able to:
-- Keep track WHO changed WHAT WHEN and WHY?
-- Revert to a former version of an object (e.g. when the fix of a former defect must be revoked for some reason)
-- Keep track which changes have been made for a certain Change Request (NOT meaning SAP Change Requests, but Change Request for our interface development)
- Label a certain version state as 'released' or 'tested' or whatever
- Perform a kind of 'Branching' (Classical Software Configuration Management task), e.g. when we release a version of our interface and start the development of a new version, we must open a 'Maintenance Branch' of our released version parallel to the ongoing development of the future release.
When I say 'Objects', I mean everything being concerned when developing something within R/3; that can be ABAP programs, forms, tables (structure and content(!)), etc.
We are using an SAP System version ECC 5.0 for development; as for now, we have come to the conclusion to use the versioning that comes with the Transforms, although they do not really cover the above requirements as we would like to.
Is there anybody out there who had the same idea and solved it somehow?
My impression is that in the SAP world, classical Software Configuration Management is not a part of the way of thinking; and that development for SAP R/3 has little in common with classical software development.
But maybe there is an add-on or some hidden features of NetWeaver or anything that can solve these issues.
Hope is the last to die...
Thank you very much for any feedback,
Regards,
Jörg

Thank you very much for your answers!
@Pushkar:
No this is not exactly what I meant;
What we want to do is a kind of classical configuration management or at least version control of
development objects like ABAP programs, table definitions, table data etc. that are contained within our SAP development system.
It's not about version management of external documents imported into SAP.
I know that there is a kind of version control via Transports, but this does not cover all classical version control mechanisms; what we are missing there is
- the possibility of reverting to an older version of an 'object'
- Branching / Merging mechanisms
- the possibility to choose which changes I want to release with which transform and which objects
- view differences between arbitrary versions of an object
I was hoping there is maybe a kind of 'add-on' or maybe even a built-in tool that provides classical version control mechanisms or something similar.
Thank you for further help,
Regards,
Jörg

How to install Software Deployment Manager

Hi!,
I have downloaded the PDK files and want to deploy it? How do I deploy them? As per help I need SDM ( Software Deployment manager to deploy this files, from where I will get software deployment manager and how to use SDM to deploy PDK files...please help...
Also I have more query...
In my netweaver studion, when I goto window-->preference, why I can't see software deploment manager link? this SDM is used to deploy WebDynpro application with Enterprise portal....
Please help me....
Thanks !

hi
software deployment manager installed automatically in central instancc while installing sap netweaver .
Thanks
Bharathi.Ch

Location to download IPS software upgrade Version 7.1(5)E4

Hi,
In last month I found latest released IPS software version 7.1(5)E4 for IPS appliance 4260 on cisco site.
However it is no more available over there now can I have exact download location of the software upgrade as I want to upgrade my device with the latest release.
Regards,
Tanvirsinh Padheriya

Cisco announced there are some problem (lockup, crash, etc) in ver. 7.1.5 today.
They have halted downloads of 7.1.5
see more info. the below page
http://tools.cisco.com/security/center/viewBulletin.x?bId=475&year=2012
best regards,
Roy Lee

Configuration of Software Lifecycle Manager with MOPZ

We want to use MOPZ and additionally the Software Lifecycle Manager functionality which is available as of SP15 of SSM. Where can i find documentation about this functionality? We have the problem if i call transaction /TMWFLOW/MOPZCA that the Web Services for SLM are not available. Which Web Services? I have created a http connection to the SLM server (Java stack) like the description in the help of IMG.
How can i connect a software repository to MOPZ/SLM ?

Hello,
For this problem I had many debug sessions with SAP.
Now a new note is availabe:
Hinweis 1154188 - SLM web service authentication 700 SP14
please check.
Unfortunately I'm stuck in the next problem - download doesn't work in MOPZ.
I think this is my next case with SAP.
regards,
Christoph

Problems with integracao of the JDeveloper with Software Configuration Management (S

1) Error with JDeveloper 9i and Software Configutarion Management (SCM)
I have a problem with the JDeveloper 9i integrated with the repositorio 6i (SCM). When I make checkout of a
source in java of the repositorio, after that I make the alteration and later I make checkin of this source,
some times occur an error of feed of checkin or occurs error of checkout in case that it obtains to
make checkin.
2) Error when I open one branch and later that the alteration was finished I want to finish this branch.
when beginning one branch to tabalhar and I make alterations in a source in java, and to the end I want to
finish this branch, appear a message informing that some source in state of checkout exists, but when I go to
verify in the stack of checkout, do not exist no source or to folder.
Somebody could help me?
In case that it has the solution or it passed for these experiences?

Hi Uwe :-)
We know, that we have to raise the parameter PROCESSES to solve our problem (for a while). But we want to solve and understand the problem once for all.
And we noticed, that the processes raise everytime, we open a web-page in the visual editor in the JDeveloper. And we want to know, if anyone knows why. Or should we have forgot to set any parameter. Maybe its a bug of the JDeveloper version, we are unsing.
I just have found the error, that occurs in JDev.
Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler foundMaybe this is helpfully? :-/
Regards
Majo
Edited by: DerMajo on 09.11.2009 07:49

Anything in SAP that suits software configuration Management profile..

Hi guys.....i am working as Software Configuration management engineer i want to know if there is anything in SAP (plz remenber my knowledge in SAP is zero!!!!!) that can add value to my domain.

Thank you very much for your answers!
@Pushkar:
No this is not exactly what I meant;
What we want to do is a kind of classical configuration management or at least version control of
development objects like ABAP programs, table definitions, table data etc. that are contained within our SAP development system.
It's not about version management of external documents imported into SAP.
I know that there is a kind of version control via Transports, but this does not cover all classical version control mechanisms; what we are missing there is
- the possibility of reverting to an older version of an 'object'
- Branching / Merging mechanisms
- the possibility to choose which changes I want to release with which transform and which objects
- view differences between arbitrary versions of an object
I was hoping there is maybe a kind of 'add-on' or maybe even a built-in tool that provides classical version control mechanisms or something similar.
Thank you for further help,
Regards,
Jörg

Prime Infrastructure 1.2 - Software Image Management

Good Day,
I have some issues with CPI 1.2. I've tried to Import Images from Cisco.com through Software Image Management
for test purposes by using my credentials. But it has finished success just a twice. Other attempt hadn't any result.
Then I try to choose Image for my test 3750E switch, sometimes I have error message like bellow:
After I choose another image and return to first that I need, and press <Submit>, I have a message that "Image collection job CCO Image Collection Job is Scheduled Successfully":
I wait some time and refresh, but I don't see any new Images. The same problem exist then I try Import Images from connected Devise. I use Shedule Start Time - Now.
Also, I can't view any information about Image in Device Work Center:
Any ideas, guys?

I'm having the same issue. I'm thinking there are still a lot of bugs in PI that Cisco needs to work out. LMS is still the better option for now in managing your switching environment. I know that Cisco hopes to role all device management under the umbrella of PI, but they still have some bugs to workout IMO.

New EWA Report Topic - Software Change Management

Dear Experts,
EWA reports has a new topic named Software Change Management , in this topic there is a subject name "Transport Requests with a short Transition Time" with following explanation;
Explanation : Transport requests with short transition time,The duration between the export from the development system and the import into the production system was shorter than one day.
Total number of transport requests 74 Total number of transport requests in production.
Recommendation: Transport requests with a short transition time of less than one day have occurred in the last week. These transports may not have been tested sufficiently.
All transport requests must be tested carefully before they are imported to the production system. The requests must not be developed and tested by the same person.
Transport requests must be bundled and imported to the production system together for maintenance cycles or releases. Daily imports are only permitted in emergency situations.
How can we check which requests Export from DEV date and Import in PRD are same ?
Best Regards

sap support send the how to document ;
1- Call transaction SDCCN in system SID and search for the corresponding EWA session in tab 'Done'. Click the "lorry" icon
2-Press the glasses icon at DATA_PER_R3SYSTEM
3-Press the glasses icon at CMO_EWA_TRANSPORT_MGMT
4- Press the glasses icon at ET_TRANSP_W_SHORT_TRANS_TIME
5- Now, you have the complete list of transports with a short transition time:

SSL Certificate for Software LifeCycle Management

Dear Friends,
We have Solution Manger 70 with EhancementPack 1 (Java 7.01 SP4). Trying to configure the Software LifeCycle Management and I am stuck at the first stage i.e. generating SSL SSL Certificate.
Here is what I have done and please let me know on how to proceed...
- Installed SAP Cryptographic libraries, all the necessary Profile parameters and activated HTTPS...
- STRUSTSSO2 --> Created SSL Server PSE
- Generated the Certificate Requests for the SSL Server PSE
- Copied the Certificate Request.
- Opened the https://service.sap.com/tcs site
- Requested for SSL Test Server Certificate by pasting the Copied the Certificate Request and generated the certificate response in a "PKCS # 7 Certificate Chain" format.
- Copied the Generated Imported Certficate from SAP Trust center Site, and Imported the Certificate response for SSL Server using STRUSTSSO2.
What else I am missing here?????????
How to generate the Import Certifcate in a crt file format for SSL client (Anonymous or Standard) PSE's?????????
Kindly help me with these issue ASAP.
Thank you,
Nikee

Users are prompted to accept the certificate from the WLC because the clients do not have a trusted root certificate for the certificate that is installed on the WLC. The SSL certificate on the WLC is not in the list of certificates that the client system trusts. There are two ways to stop the generation of this web-browser security alert popup window:
a) Use the self-signed SSL certificate on the WLC and configure the client stations to accept the certificate
b) Generate a CSR and install a certificate that is signed by a source (a third-party CA) for which the clients already have the trusted root certificates installed. For more information on this read http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

Re: Container Based Software Configuration Management

I've read the overview of Container Based Software Configuration Management and
have to admit that it is a nice concept. In fact, our SCM product SiberSafe Expert
2.0 (www.siberlogic.www) almost literally follows the guidelines mentioned in
the overview except that we call it Component Management.
SiberSafe recognizes the fact that most of software projects consist of software
components that have been inherited from and are being reused in other projects.
SiberSafe was built on the premise that it is critical to be able to version components
consisting of multiple files and folders so that a new project can be created
out of particular versions of multiple exising
components.
SiberSafe also recognizes the fact that various versions of various components
may be distributed not only across multiple projects, but also across multiple
lines of development (we call them "development streams"). This is why SiberSafe
makes the propagation of new versions of components from their "home" streams
into other streams where they are used and reused
as simple as a mouse button click.
When a few projects have a few development lines (streams) each and there are
tens or even hundreds of software components reused across these projects and
streams, it becomes pretty difficult to keep track of what went where and when.
What is the version of a specific java bean that our project currently uses? Is
there a newer version for that bean available? What verson of that bean do other
projects use? In order to provide users with
clear answers to this kind of questions SiberSafe automatically generates a visual
development flowchart that graphically shows relationships and interactions among
various components, component versions, projects and lines of development.
In fact, SiberSafe can easily generate such a flowchart even for a single file,
showing the full "travel" history of that file across projects and streams.
Alex Povzner,
SIBERLOGIC INC
www.siberlogic.com
905-4742384
Hans Thelosen <[email protected]> wrote in message
news:[email protected]...
On 16 and 17 May in Soesterberg (the Netherlands) a tool-independent
software configuration management training will be held.
In the last couple of years Software Configuration Management has grown toa
mature Software Engineering discipline with its own Functions, Methods and
Techniques. Container Based Software Configuration Management is a new
method for SCM that centralizes facilities for reuse and parallel
development of Software.
For more information see:
http://www.qa-systems.com/training/improvement_scm.jsp

All,
There has been some uptake and some great feedback on rConfig since I made this announcement two weeks ago. rConfig is offically released as Version1 today. Please login to www.rconfig.com and download a copy.
You know, it takes less than 1 hour to install rConfig on Linux and more than 2 hours to get some of it's well known commercial counterparts up and running. There is even a complete, easy-to-follow Linux build document designed especially for the rConfig installation on www.rconfig.com. You'll be backing up Cisco configuration and show outputs in no time with rConfig. And even learning a bit of Linux along the way.
And remember, it's free & open source.
Regards
Stephen
==========================
http://www.rConfig.com
A free, open source network device configuration management tool, customizable to your needs!

IPS software module management

Similar Messages

Maybe you are looking for