IPs system events and restart

Hi,
I am looking at monitoring the IDS system events like adding users/sensor application restart,interface down with a SDEE client.Does system events like this get logged in detail to the event store to be picked up by the API ...or is there something i need to do with my CIPS ver 6 to get it across with verbose messages .
Thanks and appreciate

Simply go into your IPS and create an "Event Action Filter." Simply modify the source address with that of your scanning system. You can leave the rest pretty much stock or, adjust the destination to the subnet of your DMZ. Also, you'll want to keep an eye on the areas to subtract. Making sure to take away the deny actions, and if necessary, reporting as well.
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/ime/ime_event_monitoring.html

Similar Messages

System error and restart not possible

Hi
I have developed the Proxy to SOAP scenario and it used to work normally as designed, But suddenly it started giving the System error and restart not possible,
I see the following error in the Runtime work bench on the Receiver CC
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Can anyone let me know what the error is
Thanks
PR

Hii
If this channel was in working state earlier, then this error would mean that the receiver webserver hosting the webservice has some problem. You may contact the receiver system for checking out if they have problem at their end and if they agree resend the messages and it should pass through.
It may be problem with certificates even.
Best Regards

System Events and Coreservicesd takes up all CPU at startup

Every time I boot up my laptop System Events and coreservicesd take up to 85% of my CPU. It takes about 10 minutes for it to finally go away and it makes my fans blare. If I'm in a public place I force quit system events which makes them both go away. What in the world causes this and how can I fix it?

I'm having this same problem. It is related to Growl, and perhaps a recent update of Growl to 1.1.3. I'm trying to figure out a way to fix this without uninstalling Growl, since I find this app very useful.

Testing system events (shutdown/restart)

Is anyone aware of a way to determine what event was sent to loginwindow to cause a system shutdown.. Im basically looking for a way to test for the events of kAELogOut
kAEShowRestartDialog
kAEShowShutdownDialog
kAERestart
kAEShutDown
as documented in http://developer.apple.com/documentation/MacOSX/Conceptual/BPSystemStartup/Artic les/BootProcess.html#//apple_ref/doc/uid/20002130-114618-BAJGBJHI
thanks

You need to implement applicationShouldTerminate and the documentation is pretty explicit that your app doesn't get told who's asking it to quit but I'll assume you're up to speed on all that.
You would need to poll AppleEvent or the loginwindow process or come up with some other way of determining who's asking you. I've seen this solution - it isn't pretty but it's the kind of thing you'd need to think about doing.
http://myztik.katan.com/?p=176
I'm not aware of a way to use BSD level kqueue to get System event calls but that doesn't mean there isn't one. Even if it is possible it means your App would need to constantly deal with notifications you don't care about. Also keep in mind your applicationShouldTerminate will get called for every quit so there won't always be a Systemwide notification... it could just be the Application's Quit command.
HTH,
=Tod

Storage cells: System Events and System Defined Thresholds

Hi, there,
I have an Exadata V1 (yes, I do) and I recently saw this flag up as an alert on one of my storage cells:
2 2013-02-19T17:15:50-05:00 critical "39:Temperature:Threshold based -- Upper Non-critical going high State: asserted"
3 2013-02-19T17:15:50-05:00 critical "255:System Event:System Event -- PEF action : 7 State: asserted"
4 2013-02-19T17:15:51-05:00 critical "39:Temperature:Threshold based -- Upper Non-critical going high State: deasserted"
Basically, for one second, it appears that the temperature threshold was exceeded. This doesn't surprise me as the V1 machine is: a) very tightly compressed into a small box, b) is old, c) is HP.
Because of a bug in our version of the ESS, we just use the system-defined thresholds on the storage cells. I have two questions:
1) How can I find out the system-defined thresholds - or at least the thresholds that the storage cell is using
2) How can I find out what the 'System Event - PEF action: 7' is?
Mark

hmmm... I had an issue with an Exadata X2 some time ago when a user-defined temperature threshold was not giving alerts (later documented in MOS note 1380758.1/bug 13387575 and fixed in 11.2.3.1.0 by the way). At the time I was told that there's no way to see build-in thresholds in cellcli.
As far as the specific error ID goes I don't know what it means, but I'd suggest checking HP iLO documentation in addition to regular Oracle channels.
Marc

System freezes and restart after user login screen shows up

The interesting thing is thing is that the same thing happens on the bootcamp partition. Every time I turn on MBA mid 2012, when the login screen shows up, the computer freezes and than turns off. Same problem when I boot into bootcamp partition, the computer turns on, pass through windows logo and after the login screen shows, it turns off.
...forgot to mention that it's running osx 10.9
I figure out that I can log in with Sage Mode. Every time I log in with Safe Mode, the error popup message shows up saying about the error and its log. There is the log:
Anonymous UUID:       1975668F-0791-B095-A5DD-001905FAF4A7
Mon Nov 4 23:53:40 2013
panic(cpu 2 caller 0xffffff8002adc19e): Kernel trap at 0xffffff7f84801ee1, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000080, CR3: 0x000000003e429024, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0xffffff800f7ebc04, RCX: 0x000000000000000e, RDX: 0x0000000000000000
RSP: 0xffffff8081d32fc0, RBP: 0xffffff8081d32fd0, RSI: 0xffffff801121a03a, RDI: 0x0000000000000000
R8: 0xffffff801121a602, R9: 0x0000000000000000, R10: 0xffffff8003070850, R11: 0xffffff8003089ce8
R12: 0xffffff800fae8644, R13: 0x0000000000000000, R14: 0x00000000000164a4, R15: 0xffffff800fae864c
RFL: 0x0000000000010286, RIP: 0xffffff7f84801ee1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000080, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff8081d32c50 : 0xffffff8002a22f69
0xffffff8081d32cd0 : 0xffffff8002adc19e
0xffffff8081d32ea0 : 0xffffff8002af3606
0xffffff8081d32ec0 : 0xffffff7f84801ee1
0xffffff8081d32fd0 : 0xffffff7f847f6388
0xffffff8081d33070 : 0xffffff7f8480de2d
0xffffff8081d33130 : 0xffffff7f84811951
0xffffff8081d332b0 : 0xffffff7f847fb2b8
0xffffff8081d33390 : 0xffffff7f847f882f
0xffffff8081d333e0 : 0xffffff7f847e7422
0xffffff8081d33790 : 0xffffff8002be2abf
0xffffff8081d33af0 : 0xffffff8002be363d
0xffffff8081d33f20 : 0xffffff8002be31d9
0xffffff8081d33f60 : 0xffffff8002e3db67
0xffffff8081d33fb0 : 0xffffff8002af3af8
      Kernel Extensions in backtrace:
         com.paragon-software.filesystems.ntfs(78.1.10)[C00EE7CC-736F-3A48-AC68-33826B2C4CDF]@0xffffff7f847e4000->0xffffff7f8481dfff
BSD process name corresponding to current thread: mount_ufsd_NTFS
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000002800000
Kernel text base: 0xffffff8002a00000
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 12684772054
last loaded kext at 12348392875: com.paragon-software.filesystems.ntfs          78.1.10 (addr 0xffffff7f847e4000, size 237568)
loaded kexts:
com.paragon-software.filesystems.ntfs          78.1.10
com.protech.NoSleep          1.3.3
org.virtualbox.kext.VBoxUSB          4.2.16
org.virtualbox.kext.VBoxDrv          4.2.16
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AppleHDAHardwareConfigDriver          2.5.2fc2
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AGPM          100.14.11
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.ApplePlatformEnabler          2.0.9d1
com.apple.driver.AppleHDA          2.5.2fc2
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.iokit.IOBluetoothUSBDFU          4.2.0f6
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleMikeyDriver          2.5.2fc2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleThunderboltIP          1.0.10
com.apple.driver.AppleIntelHD4000Graphics          8.1.8
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleMuxControl          3.4.12
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleIntelFramebufferCapri          8.1.8
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyEventDriver          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.driver.AppleUSBCardReader          3.3.5
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleUSBHub          650.4.4
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleUSBXHCI          650.4.3
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.driver.DspFuncLib          2.5.2fc2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.iokit.IOSurface          91
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleThunderboltEDMSink          1.2.1
com.apple.driver.AppleThunderboltDPOutAdapter          2.5.0
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.driver.AppleHDAController          2.5.2fc2
com.apple.iokit.IOHDAFamily          2.5.2fc2
com.apple.driver.AppleSMC          3.1.6d1
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.AppleGraphicsControl          3.4.12
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOAcceleratorFamily2          98.7.1
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.driver.AppleUSBMultitouch          240.6
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.driver.AppleThunderboltNHI          1.9.2
com.apple.iokit.IOThunderboltFamily          2.8.5
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: MacBookAir5,2, BootROM MBA51.00EF.B02, 2 processors, Intel Core i5, 1.8 GHz, 4 GB, SMC 2.5f9
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463235363634485A2D3147364D3120
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463235363634485A2D3147364D3120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE9), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD TS128E, 121,33 GB
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
Thunderbolt Bus: MacBook Air, Apple Inc., 23.4
Any ideas?

Problem solved... Figure out that in Safe Mode, the bootcamp partition is unmounted. So I thought that it could be the problem, when the login screen shows up, I guess the system was trying to mount the bootcamp partition and for some reason the computer was restarting. That's why the computer was turning off when I was trying to log in into Bootcamp partition also. So I wiped my bootcamp partition and resized the OSX partition. Now I can succesfully log in my user with out a problem

Collecting IPS Error Events and Status Events in CS-MARS

Does anybody know how to collect either the "Error Events" or the "Status Events" from 4200 series IPS devices in CS-MARS? The only events that seem to be collected by CS-MARS are the "Alert Events".

You can use the show events command to view the alerts generated by SensorApp and errors generated by an application
â¢ evError-Application errors
â¢ evStatus-Status changes, such as an IP log being created
The show events command is useful for troubleshooting event capture issues in which you are not seeing events in Event Viewer or Security Monitor. You can use the show events command to determine which events are being generated on the sensor to make sure events are being generated and that the fault lies with the monitoring side.

With Firefox 4 gmail stays logged in after Firefox is shut down and restarted

This is related to the post mentioned here: https://support.mozilla.com/en-US/questions/811479
with a twist.
In Firefox 4 if you shut down the browser without signing out of gmail you stay signed in, even after a full system shutdown and restart.
I HAVE NO APP TABS etc, and my security settings are also normal (viz. no stay signed in etc etc) I also always use HTTPS
(In earlier versions, if you didnt always use https, then shutting the browser wouldnt log you out. But if you always used https, you would be logged out)
Heres what happens: First let me make it clear that I have no app tabs, and all the other settings are correct (viz. no stay signed in etc etc). Now say one of the open tabs is my mail inbox. If I close and restart browser, I'll be in my inbox!! (Earlier versions of firefox took me to the login page).
Whats the issue here? Does everyone else also experience this?

This is a massive design flaw or bug and needs fixing; I can't recall a larger direct security issue than leaving people prepped for auto-login upon closing a browser, and to one of the most popular email providers in the world. Persisting since v.4 all the way up to current v7.0.1. Ridiculous.

Macbook pro 13" retina, 10.10.1 freezes and restarts

13" retina macbook pro
2.9 GHz Intel Core i7
8 GB 1600 MHz DDR3
10.10.1 (14B25)
Experience:
While performing a simple task... e.g. moving my mouse over to the menu and clicking on File or Edit or Go. The mouse freezes, at this point I can no longer click on anything, move the mouse, use the multi function scratch pad or even use short keys to tab through to other applications.
If I leave the mac alone for maybe 30secs the machine will shut itself down and do a restart. Where I then have to log back into the machine.
Solutions:
I've tried to monitor what application or feature this happens on, and it is difficult to say that it is any particular issue.
Yesterday I was on Safari and just clicking on links on a webpage when it froze and restarted
Today I was opening finder and clicking the 'Go' and the system froze and restarted
Usually when I am on my machine I will have maybe 5-9 applications open at any given time. word, excel, outlook, Skype, safari, chrome, notes, iTunes, wunderlist, notes.
Questions:
how can i better report this issue?
what can I do to prevent it?
is this a known problem?
what is the resolution?

hi eric,
interesting I recently (yesterday) updated my version of yoesmite, 10.10.2 and today my mac crashed. it happened at about 12:06 I have the information that I think you need but there are tonnes of it.
there are pages of this statement in the console log:
03/02/2015 12:06:43.000 kernel[0]: BUG in process suhelperd[188]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
then it says
03/02/2015 12:06:45.068 /usr/sbin/nmnetmgrd[29]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.2 instead of 10.10.2. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
then i get repeated stuff like this:
Call location:
03/02/2015 12:06:45.069 /usr/sbin/nmnetmgrd[29]: 0   CarbonCore                          0x957ee7c7 ___Gestalt_SystemVersion_block_invoke + 135
03/02/2015 12:06:45.069 /usr/sbin/nmnetmgrd[29]: 1   libdispatch.dylib                   0x936e20b5 dispatch_once_f + 251
03/02/2015 12:06:45.069 /usr/sbin/nmnetmgrd[29]: 2   libdispatch.dylib                   0x936e30d8 dispatch_once + 31
03/02/2015 12:06:45.069 /usr/sbin/nmnetmgrd[29]: 3   CarbonCore                          0x95780e88 _Gestalt_SystemVersion + 1050
03/02/2015 12:06:45.070 /usr/sbin/nmnetmgrd[29]: 4   CarbonCore                          0x95780a39 Gestalt + 150
03/02/2015 12:06:45.070 /usr/sbin/nmnetmgrd[29]: 5   nmnetmgrd                           0x00004974 _ZN17NMSessionsManager5startEv + 92
03/02/2015 12:06:45.070 /usr/sbin/nmnetmgrd[29]: 6   nmnetmgrd                           0x0001652f main + 209
03/02/2015 12:06:48.347 com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
03/02/2015 12:06:48.348 com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand
03/02/2015 12:06:48.348 com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand
03/02/2015 12:06:48.351 com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand
03/02/2015 12:06:48.351 com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.
03/02/2015 12:06:48.351 com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand
03/02/2015 12:06:48.353 com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand
03/02/2015 12:06:51.643 SecurityAgent[171]: User info context values set for joetrainor
03/02/2015 12:06:51.676 com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
then there is a vast volume of information from 12:06 to 12:09 when the computer shut itself down. I am happy to send this information if it is important but I sense it is probably just telling the same thing.
Can you help me understand what is happening?

Snow Leopard upgrade "where is system events" message on first boot

I just upgraded Mac OS 10.5.8 to Snow Leopard via retail DVD on my mid-2007 MacBook Pro (just upgrade, not Erase and Install). The install succeeded and the machine rebooted....Setup Assistant started and I got a pop-up window with "Choose Application" in the header and the message "Where is System Events" and the bottom pane showing the list of applications on the machine and the options to Browse, Cancel or Choose...
What does this message refer to?
What should I do?

nobody seems to know for sure why this messages comes up for some people after upgrade. some 3rd party app you have is doing it.
http://www.macosxhints.com/article.php?story=20090828102610398
it's ok to hit cancel but it's also ok to select 'system events" which is located in /system/library/coreservices". also check your login items. if system events is there remove it from login items.

Define event types in Customizing and restart the transaction.

how to define event to restart the transaction in BADI
I have given error message in badi. it is giving
No SAP Event Management communication for events; no event types def
    Message no. /SAPTRX/ASC084
Diagnosis
    You have not defined event types for the business process types.
    therefore not possible to communicate event data to SAP Event
    Management.
System response
    The communication of event data is aborted.
Procedure
    Define event types in Customizing and restart the transaction.

Hi Kevin,
What DataSource does your testalias refer to?
- If it is a custom DataSource, you must have created this custom DataSource also.
- If it is the default DataSource, you shouldn't have this problem in general...
In either case, you can try deploying your DataSource and/or DataSource alias together with your application:
http://help.sap.com/saphelp_nwce10/helpdata/en/45/07d2eeea3e0485e10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/45/c82cd460a42e96e10000000a155369/frameset.htm
I hope that helps!
Regards,
Yordan

Windows 8 system doesn't get internet, says system event log on service has some problem of STOP 0xC000021A error which system restarts very slowly

Hi, my system runs on windows 8 on hp laptop envy series. All of a sudden, system event log on service stopped, errors which prevented the system to log on services. It displayed error of STOP 0xC000021A when i use system restore to roll back to previous
configuration. Also when I tried to refresh my pc, it says i can't do changes as log in was switched to prevent the changes by notification.I don't know what to do next, I tried to put recovery dvds which I made when system was bought, now not at all working.
Internet is not active, not able to resolve by trouble shooting and system taking lot of time to get dsktop. Previously I used to get my desktop in 10 seconds. Now its 10 min. May be I m infected with virus. My files, they are there. I tried to transfer some
files by pendrive to another system, now the new system(where i put my files in another system) crashed, windows 7 system which does not display desktop, icons etc and not at all workable.
Also in my hp system, i m unable to open control panel. if its opened, it will not go off, when i use task manager, it says explorer and shuts down. I had to force restart the system. Please resolve something to get my hp laptop workable. I m waiting for
my MS thesis to be working on that. My files are locked and no way to transfer, I fear of infected by virus to another computer also.
Pls give instructions to hw to set my hp laptop at the earliest without losing any of the files. Idon't want to reinstall and lose all the data for timebeing. Else, inform me the option for copying data safely. I tried to change the adv startup and recovery
by changing the boot sequence by DVD but this also shows error 0xC000021A and asks us to see the details. I didn't understand all this. Pls help asap.
Thanks
venkata
STOP 0xC000021A

MV
If you can boot either from the win 8 dvd or in safe mode we need the DMP files
We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag

In windows system events observed below bugcheck at the time of restart. Error _02/08/2015 11:27:58 _BugCheck _none _0x00000050 (0xfffff8a01cba4000, 0x0000000000000000, 0x... _1001

In windows system events observed below bugcheck at the time of restart.

Hi,
It seems to be a system crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Unfortunately, it is not effective for us to debug the crash dump file here in the forum. I would like to suggest that you contact Microsoft
Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I've just upgraded from Snow Leopard to Lion. Installation seemed to go OK but on rebooting it is asking where the System Events app is. What is it and where is it located?

I've just upgraded from Snow Leopard to Lion. The installation seemed to go OK but on rebooting it is asking where the System Events app is. What is it and where is it located?
Thanks

If the dialogue appeared once, and you cancelled once, the dialogue may reappear when you next log in. For more certainty I suggest a restart of the operating system, then a log in.
If you like: immediately after the problem is worked around, open the Console utility to see whether — amongst its view of all messages — there is an obvious sign of what caused the dialogue to appear. (If you see nothing obvious, don't waste too much time looking.)

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

IPs system events and restart

Similar Messages

Maybe you are looking for