IPS Version 7.0(7)E4

I am using the IDSM-2 in inline mode and I am getting the following status event message :
evStatus: eventId=1336563424842344750  vendor=Cisco 
  originator:  
    hostId: IDS1 
    appName: modprobe 
    appInstanceId:  
  time: May 15, 2012 05:48:23 UTC  offset=0  timeZone=UTC 
  syslogMessage:  
    description: Note: /etc/modules.conf is more recent than /lib/modules/2.4.30-IDS-smp-bigphys/modules.dep
Does anyone know how to resolve this issue?

This is a known open issue CSCta07007.
Regards,
Sawan Gupta

Similar Messages

  • Can VMS be used to upgrade IPS version (not sig)

    Can VMS be used to upgrade the IPS version on sensors? Or do you have to log into each sensor and upgrade that way?

    VMS (and it's little brother CSM) were designed to apply all the updates; signature, Service Packs and even (when you're lucky) Majot Updates. VMS is a management tool, allowing you to manage more sensors than if you had to log into each one by hand.

  • Is it possible to replace my W520 screen with new IPS version?

    My W520 laptop continues to give good reliable service. \
    However I now look with envy the latest versions that use IPS screens. This is important to me as I am a pro photographer.
    I would like to know if is possible to upgrade/replace my existing screen with the latest tech... namely the 3K (2880 x 1620), IPS LED Backlit Anti-Glare Display?
    Is it possible for me to order the part and simply replace it together with the required drivers?
    Thanks

    Someone used an LVDS to eDP adapter to get a newer eDP 1080p IPS panel working in a LVDS connected X220.
    AFAIK, no one's done it for the W520. The extra hurdle is that the 3K resolution probably exceeds the bandwidth of LVDS. No guarantees either way.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Asa5512-x IPS version

    HI,
    If my Customer buy an ASA5512-K9 and he want to add IPS module into the ASA, is it possible or do he need to replace all of the security Appliance.
    Also what are the alternative to provide IPS tp an ASA5512-K9 via the web with firepower
    Thanks

    It is possible but not recommended to install the legacy Cisco IPS module on an ASA-5512X. That product is approaching end of sales and not being actively marketed.
    The ASA with FirePOWER services is the best way forward. To implement that you would need to have the Solid State Drive (SSD) installed. If the ASA wasn't ordered with one, it can be added as a spare. You would then need to order the appropriate subscription service and attach that to the Smartnet coverage on the unit.
    There is an ordering guide (partner access required) that your reseller can refer to explaining the options in great detail.
    Once you have the necessary purchase completed, there is a Quick Start Guide for setting up the system.

  • Is IPS patch 5.1 (1p1) incoporated into version 5.1(2)?

    Hi
    IPS version 5.1 was not stable in our network, so TAC engineer gave us a special patch (1p1) and we installed it.
    This 1p1 was not published on CCO officially.
    Now version 5.1(2) is out, does anyone know whether 1p1 is incoporated into this 5.1(2)? Can we upgrade the IPS to 5.1(2)?
    Thanks in advance!

    All of the fixes from 5.1(1p1) Patch have been incorporated into the 5.1(2) Service Pack.

  • Insight the Ultimate Weapon, MSI GT60 2PE Dominator Pro 3K IPS gaming notebook!

    Just hands on this ultimate gaming machine of MSI GT60 2PE Dominator Pro 3K IPS version with Super Pack from the market, it took me over $2500 but really more than worth of it after I got great gaming experience!
    Let’s take a first look on the packing; GT60 Super Pack comes with big carton.
    Open the carton; it comes with big color box and a gaming backpack.
    Take both of them out, the box design is real gaming style with fantastic dragon logo, so as the gaming backpack.
    Take a look at the sticker on the box, it exposure why this GT60 Dominator Pro so valuable and special.
    Items   Description
    CPU:   Core i7 4800MQ @ 2.7GHz, boost to 3.7GHz
    Graphics:   GTX880M 8GB GDDR5, CUDA Core 1536 Unified
    Display:   2880x1620, 3K resolution IPS vivid panel, 350nits.
    Storage:   3xSSD 384GB Super RAID 2, 1TB HDD, BluRay Combo
    Memory:   8GBx4, 32GB DDR3L-1600
    System:   Windows 8.1 64bit English
    Internet:   Killer Doubleshot GB LAN, WiFi 802.11 b/g/n
    Display Output:    2x Mini Display Port, 1x HDMI, 3+1 display at same time
    IO ports:   3 USB3.0, 1 USB2.0, Aux In, Mic In, Headset out, Aux Out
    Dimensions/Weight:   395 x 267 x 34~55mm, 3.48kg with 9 Cell battery
    Open the color box you will find 2 black boxes inside.
    One on the left is the GT60 Dominator Pro 3K IPS, the right side one is full of surprise! These gaming style accessories only comes with Super Pack version, not every GT60 Dominator Pro will have these great gaming gears together.
    The gift box comes with Gaming headset, Gaming mouse, Gaming pad and Top Player Top Choice stamp tool. SteelSeries is really great and famous on gaming gear devices; MSI is also great on gaming notebooks, they are too professional to co-work with SteelSeries!
    The SteelSeries KINZU gaming mice, 3200dpi/1600dpi, very accurate optical mouse for 3K resolution monitor.
    Put the mouse on the mouse pad, with the fancy Dragon tattoo makes me feel I am ready to play games, Top Player Top Choice!
    The SteelSeries SIBERIA V2 gaming mouse, this is high quality headset and customized version for MSI gaming notebooks with fancy MSI dragon tattoo!!
    Take a look on the customized artwork, the dragon tattoo on the metal cover of both set, and the Dragon gaming logo in the headset as well, that makes this headset more gaming style and looks powerful!
    This Gaming headset belongs to MSI notebook accessories! The sound quality is really good, detail is clear on mid and high frequency, subwoofer is powerful and really suitable for gaming, even you wear for hours still feel comfortable and stable, overall quality makes me feel it’s over $150 value!
    Very special stamp tool, I would like to put chocolate on this and stamp on the Dragon Gaming Cake!!
    Let’s start to reveal the first lady, no, the real steel of GT60 Dominator Pro!!
    Look at the surface of the design, Dragon logo with light from darkness on the cover, and the metallic material on top cover and palm rest side, which makes the GT60 Dominator Pro looks high quality and gaming style.
    Take a look on the cover side, the Dragon Gaming Logo is really fancy and stylish with backlit. Brushed metal design makes the cover looks high quality and solid.
    Sound by Dynaudio speaker system, the best famous mobile sound system on this top level GT60 Dominator Pro gaming notebook is really amazing, great on sound detail and real good acoustic of human vocal and great sound stage presents!
    We put all the accessories together and boot up to check further detail on GT60 Dominator Pro 3K IPS version! The display quality is vivid.
    Let’s take a look on the detail spec., 384GB SSD Super RAID, Intel Core i7 4800MQ @ 2.7GHz, top level GTX880M 8GB GDDR5 graphics, 32GB RAM. It’s all top level and could use for 3 more years of ultra-quality games!
    When first time to use MSI gaming notebooks, you will feel amazing about the SteelSeries keyboard is really good typing feeling and solid based. It comes with multi-color backlit and move the windows key to right side, that really professional design as a gaming notebook keyboard, and the only one with real gaming design.
    Take a look in the SteelSeries Engine, the exclusive gaming software only for MSI gaming notebooks. This macro keys software built in Keypress macro, Text macro, 1 key launch program and Disable key function, besides F1~F12, all other keys could be used for macros setup, and 4 layers of keyboards o setup 4 sets of macros with 4 sets of different backlit combinations, so this is really a great software for smarter and stylish gaming experience.
    With CPU-Z tool to check, the upgraded Intel Core i7 4800MQ @ 2.7GHz, TDP 47W, 4 Cores 8 Threads is really great performance, CPU Boost could up to 3.5~3.7GHz.
    Because of Core i7 4800MQ and GTX880M, the 3D benchmarks comes with breakthrough scores than ever on the notebook platform, 3D Mark Fire Strike: P5351 pts.
    The GT60 Dominator Pro on 3D Mark 11 gains P8461 pts, it’s whole new level of the gaming notebooks, and It’s over 15% faster than GTX780M!
    The 3D Mark Vantage boost up to P33115 scores, it’s 14% faster than GTX780M!
    Then we check on other software of DirectX11 3D performance, the Heaven Benchmark is world’s 1st software tool to test DirectX11 effects, this time we use Heaven Benchmark version 3.0 to test.
    Set the Tessellation on normal to enable DirectX11 effects and run Benchmark, the Full HD resolution could get 78.2 FPS(Frames Per Second) high score result.
    Since this GT60 is 3K IPS panel edition, of course we have to try 3K resolution, you could see that the result block is smaller at 2880x1620 resolution, the result is 42.7 FPS with same setup, so we could say that 3K resolution will reduce over 45% of the FPS rate in this test, but GTX880M is too powerful, so still over 40FPS, and most games we need to get over 30 FPS to play and feel smoother, at least 20 FPS to play a game, if lower than 20 FPS, that will makes people feel lag obviously and feel dizzy easily.
    Since we tried some benchmark, of course we have to try at least a famous game to the real world experience. Battlefield 4, the biggest FPS game title since end of 2013, is one of the heaviest loading games on PC platform.
    First we made Battlefield 4 detail at 1920x1080 with Ultra Graphics Quality setup.
    The gaming frames is 46 FPS, really smooth and around 20% faster than GTX780M.
    Once we tune up the resolution to 2880x1620, the FPS drops a lot because the Ultra mode also set 4xMSAA (Anti-Aliasing), that will impact the performance a lot in higher resolution, also make graphics memory demand around 3GB~4GB, seems the 8GB GDDR5 with GTX880M is prepared for upcoming games with such as 3K or even higher resolutions!
    We could see it’s about 24~28 FPS under 3K resolution with Ultra Graphics Quality, most time it will reduce over 40% FPS rate of the gaming performance.
    Seems to set the Battlefield 4 with “High” graphics quality on 2880x1620 resolution is more suitable to play the game smoother in every theme.
    It’s about 42 FPS, close to the 1920x1080 Ultra graphics quality. So if we want to play heavy loading games at 2880x1620 resolution, set to High graphics quality setup is a good option for 3K gaming!
    After these 3D and gaming tests, let’s take a look on the temperature of the cooling system. The room temperature is 25 degree C, the temperature of fan out part is 71.2 degree C, it’s not a surprise because of GTX880M and Core i7 4800MQ, even it’s a bit lower than most gaming notebooks with this 2 combinations. The palm rest and keyboard side is 30.6 degree C, it’s really cool for users to hands on.
    After the fabulous experience of great 3D performance, let’s take a look on the benefits of “Super RAID 2”, normal 2.5” HDD is about 80~100MB/s, single SSD is about 400~550MB/s, BUT, GT60 Dominator Pro boost over 1536MB/s and average is 1477MB/s, that’s 15x faster than single HDD, almost 3x faster than single SSD.
    If we check on the AS SSD Benchmark tests, you could see more detail of the storage access performance is amazing, the Sequential read is 1116.76MB/s, write is 786.79MB/s. 4K-64Thrd read is 665.09MB/s, write is 461.18MB/s, it’s ultra fast!
    The GT60 Dominator Pro 3K IPS edition comes with Killer Doubleshot LAN and WiFi, it provides faster response time of gaming experience, when you at different LAN/WiFi environment, Killer software will ask you to make an internet speed test, this will fine tune your LAN/WiFi for smoother and faster online experience.
    MSI also got a new software tool called “Dragon Gaming Center”, this tool is also good for hardware monitor and utility launch tool. Also could show the status of Hybrid Power enable or disable.
    The ultimate weapon for enthusiast gamers:
    The GT60 2PE Dominator Pro 3K IPS version is extremely powerful, it comes with most of the features that a great gaming notebook could have, 3K IPS panel is really great effect of vision quality, SteelSeries keyboard with SSE is amazing for gamers to play their games smarter, Sound By Dybaudio present really good detail sound quality, Killer Doubleshot is faster for online gaming, of course the GTX880M is awesome for gamer to play Full HD even 3K resolution games, the backlit of Dragon logo and keyboard is really beautiful.
    Conclusion:
    The overall score I will give this GT60 2PE Dominator Pro 3K IPS edition with Super Pack is 95 out of 100, this is really great machine for any hard core gaming or power user usage, I would recommend any one to must-have this notebook if it’s affordable for you!!
    Game Performance:   ★★★★★★★★★★
    Storage Performance:   ★★★★★★★★★★
    Gaming Design:      ★★★★★★★★★☆
    Sound Quality:         ★★★★★★★★★★
    Keyboard:         ★★★★★★★★★☆
    Online speed:         ★★★★★★★★★☆
    Price Range:         ★★★★★★★★☆

    Ok either you work for MSI or you changed the settings in 3dmark11. I only scored around 5K with my GT60 2PE 3k. Any idea why I'm scoring 3k below you? Laptop was plugged in btw. Also how can you enter bios settings with this laptop? I suspect that maybe the hybrid gpu thing is affecting my score, and the Pc is probably not fully utilizing the GTX 880M, maybe in bios I can disable the integrated CPU's video card??? Please let me know. Thanks.

  • Detect attack man in the middle with IDS/IPS

    Hi,
    I have aip-ssm 20, IPS Version 7.0(6)E4
    The ID  signature 7101, 7102, 7104 and 7105 is used for detecting attack arp poison.
    The sensor works as IDS in promiscuous mode. All traffic is fordwared to sensor.
    I have made attack man in the middle with cain & abel but sensor doesn't send alarm. I attach image with signatures.
    Why don't sensor detect attack? The network is in zone inside.
    Can anybody help me, please?

    Did you check if SSM is getting those packets by running "packet display .." command on the sensing interface. In SSM the ARP packets would not be forwarded by ASA to the SSM.
    thx
    Madhu

  • Emergency IPS Service Pack to be Posted Later Today

    There was an emergency notification last night that I want to be sure everyone has seen:
    1. Emergency IPS Version 5.0(5) Service Pack to be Released on 10/28 to Address
    CSCsa85330
    An emergency service pack will be released later today (October 28, 2005) to address a high severity bug relating to Daylight Savings (bug details below). All version 5.X sensors are impacted. To resolve this bug, this service pack must be installed prior to Daylight Savings which will occur on Sunday, October 30th 2005.
    Bug Details:
    Bug ID: CSCsa85330
    Bug Title: MainApp - core during day when switchover to daylight savings happens.
    Description: Within 24 hours after a transition to or from summertime (i.e. Daylight Savings Time), the sensor may become unresponsive and not allow CLI logins if Daylight Savings Time is enabled. The MainApp process will no longer run and a core file will be generated in /usr/cids/idsRoot/log/mainApp/.
    The files for the 5.0(5) service pack will be posted later today (target time is 2:00 p.m. U.S. Central). Once available they can be downloaded from the following URLs:
    Sensor: http://www.cisco.com/cgi-bin/tablebuild.pl/ips5
    IPS MC: http://www.cisco.com/cgi-bin/tablebuild.pl/ipsmc5sp
    This Service Pack will also resolve the following known issues:
    CSCsb87741 TCP streams with certain ordering may not be properly inspected
    CSCsb92206 Sensor boots up in crit level 2
    CSCsb87674 4215 IPS 5.0 inline mode stops transmitting packets
    CSCsb84996 sensorApp fails to shutdown when sent a SIGINT from mainApp
    CSCsc02898 ips sensor 5.0(4) sensorapp aborting.
    CSCsc04126 sensorApp aborts for BiDirData ListObj
    CSCsc15875 IPS 5.0 is unable to shun E1 channelised inft. ( Serial x/y:z)
    Another bulletin will be sent out within 2 hours of the posting of this Service Pack announcing its availability.

    A little more information:
    If your sensor is not configured for summer-time, then your sensors will not hit CSCsa85330.
    If your sensor is running version 4.x, then your sensor will not hit CSCsa85330.
    But if you sensor is version 5.x, and configured for summer-time with the default settings which are used in most locations in the United States and possibly other countries. Then your sensor is likely to hit CSCsa85330.
    If you are unable to install the 5.0(5) Service Pack you may want to consider disabling summer-time on your sensors before this coming Sunday when the switch over happens.
    What happens if your sensor does not get upgraded before Sunday and you are using the summer-time option for handling DayLight Savings Time:
    The mainApp process will core sometime during the 24 hours after the switchover happens.
    With the mainApp core you will no longer be able to ssh or telnet to the sensor as the cisco userid, or any other userid with administrator, operator, or viewer privelage levels. Any monitoring tool pulling events from the sensor will loose connection to the sensor because the connection is through the web server that is part of mainApp.
    How to recover:
    If you have a service account, then login using the service account. Switch to user root using the command "su -" and provide the same password for root as for your service account.
    As user root you will then need to execute "reboot" to reboot the sensor.
    NOTE: The service account unlike the other accounts can still login even after the mainApp crash.
    If you do not have a service account then the sensor will need to be rebooted by another means. If the snesor is an appliance you will need to physically power the sensor on and off. If the sensor is an IDSM-2, NM-CIDS, ASA-SSM-10, or ASA-SSM-20, then you will need to login to the switch, router, or asa and reboot or reset the module.
    I will keep you posted of any other developments, and let you know when the 5.0(5) Service Pack is available.

  • IPS MC: It doesn´t show any signature.

    Hi.
    I had IPS MC 2.1.0 (Build 123) functioning fine. I installed the idsmdc2.1.0-win-CSCsc336961.tar file in order to solve the CSCsc33696 bug. Next, I installed an update signature for IPS version 5 (But I didn´t has any IPS sensor version 5, I just was checking), but the update didn´t work. Afther it, I noted that I have a big issue: When I try to modify any signature, in the Settings->IOS IPS, it shows:
    Object loading failed. Errors occurred while loading the Signatures. Not all signatures may have been loaded.
    It doesn´t show any signature.
    I erased all the sensors, including the IOS IPS. Then I import one of the IOS IPS and follow the instruction for the CSCsc33696 bug. I reimported the device, deployed configuration, disabled the IPS feature in the router and enabled the feature in order to load the signature configuration, but the issue persist. Then, I installed the newest signature update to IDS sensor version 4 (it includes IOS IPS update) and it installed without problems, but the problem in the sigature page perisist.
    I reinstalled the IPS MC, but the problem persist. I uninstalled the IDS MC, and installed again without save the database. It shows the application IDS MC and Security Monitor without configuration, like a new installation, but the issue persist!!!
    Someone had this problem? Someone know how can I solve it?
    Thanks.

    The Cisco IOS IPS feature restructures the existing Cisco IOS Intrusion Detection System (IDS), allowing customers to choose to load the default, built-in signatures or to load a Signature Definition File (SDF) called attack-drop.sdf onto the router. The attack-drop.sdf file contains 118 high-fidelity Intrusion Prevention System (IPS) signatures, providing customers with the latest available detection of security threats. For more information refer to following url:
    http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c9587.html

  • Upload through inline IPS increases inspection load

    The   IPS-4240-K9  [IPS Version 7.0(4) E4] is deployed in inline mode before the ASA and perimeter router .The design is  LAN->IPS->ASA->Internet Router.The problem is that when i am uploading on the internet the IPS inspection load increased to 100% and the devices beyond the IPS become non-responsive(ping drops from ASA and router).Surprisingly the ping response on IPS does not break,when I put the IPS in never inspect mode (by pass on) the problem does not happen.Hence its confirm that the issue is with the IPS and its inspection load due to upload.
    Please guide on how to resolve it . thanks

    Hi Sawan,
    No there is no particular signature firing a lot..normal signatures which do fire in normal operation..
    By traffic load u mean the size of file being uploaded ,even if we upload a file between 20-40 MB the ping drops on the devices beyond IPS starts and continues until the file is uploaded..once the file is uploaded completely which in the case of 20-40 MB is in within seconds the situation returns to normal...
    We will upgrade soon ...but is there any bug in this release related to this problem ??
    Thanks for the reply ..
    Rgds
    Unus

  • Updating IPS sig using Cisco Works LMS 2.5

    I'm a new and novice user of Cisoworks
    I have been navigating through the package for two days now and have discoved how powerful the tools are
    Can some direct me to the area to udpate a Sig of an IPS I believe that it may be in the Software Mangement section of RME

    Yesterday Cisco announced a new tool for managing IPS sensors at smaller sites (less than 5 sensors).
    The Cisco IPS Manager Express (IME):
    http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033_ps4077_Products_Data_Sheet.html
    IME is the next generation of IEV. It is designed for small deployments of up to 5 sensors. It can do event monitoring and reporting (it can do the Top 10 Attacker, and Top 10 Signature reports you asked about).
    But new in IME it can also do configuration when managing IPS version 6.1 sensors.
    IME and IPS version 6.1 are not yet available. Both are in the final stages of testing.
    Both should be available in the next month or 2.
    IME (just like IEV) is available at no additional cost for users with active Cisco Service for IPS contracts for their sensors.
    NOTE: The same contract also includes entitlement to the IPS 6.1 version, as well as the Signature Update License. If your signature license is up to date, then your contract is up to date and you are entitled to both IME and IPS 6.1.
    For small deployments of 5 sensors or less we currently recommend using IEV 5.2 for monitoring and IDM for configuration.
    With the release of IME we would recommend IME for both monitoring and configuration.
    NOTE: IME can be used to monitor the new IPS 6.1 sensors, but can also be used for monitoring the older 6.0 and 5.1 sensors as well. When using IPS 6.1 you could choose between IME or IDM for configuration. But if using IPS 6.0 or 5.1, then configuration would still be done through IDM.
    For larger sensor deployments of 6 or more sensors, then CSM is recommended for configuraiton, and CS MARS is recommended for monitoring.

  • When to upgrade from 7.0 to 7.1 on IPS-SSM_10

    I have IPS-SSM10 on ASA5510 running on IPS version 7.0(8)E4. When do I need an upgrade to 7.1 version?               

    7.1(6) is the first 64-bit OS for the SSM platform.  Previously this was only available for some of the larger appliances and modules.  I suggest that you read through the following Read Me for 7.1(6) before upgrading so that you better understand the new features, resolved bugs, and open caveats.
    http://www.cisco.com/web/software/282549759/94912/IPS-7-1-6-E4.readme.txt

  • IPS (ips-k9-7.2) can run on GNS3

    Hi,
    Any one help on this, can i run IPS (ips-k9-7.2) software verion on GNS3.
    Regards,
    M.N.Ashique

    Hello,
    I have not been able to do it.
    Have you been able to run any IPS version on GNS3?
    Rate all of the helpful posts!!!
    Regards,
    Jcarvaja
    Follow me on http://laguiadelnetworking.com

  • Router NME IPS - use promiscuous and inline mode simultaneous

    Hi all,
    we are using the IPS module NME-IPS-K9 on a Cisco 2951 router. We like to use the IPS in promiscuous and inline mode simultaneous. For example traffic from a client to a server should pass through the IPS. But the IPS should only recieve a copy of the VoIP traffic.
    In the interface configuration mode the following command is set.
         ids-service-module monitoring promiscuous access-list 101
    If I try to set a interface to inline mode I get the following message:
         "Only either Inline or Promiscuous
         monitoring is supported on the router at one time.
         Please remove Promiscuous monitoring on all interfaces
         before configuring Inline monitoring. Only either Inline or Promiscuous
         monitoring is supported on the router at one time.
         Please remove Promiscuous monitoring on all interfaces
         before configuring Inline monitoring."
    Is there any way to use promiscuous and inline monitoring at the same time? Is there a firmware update available which includes this feature? Any other idears?
    IOS version of the router: 15.0(1)M4
    IPS version:  7.0(2)E4
    Kind Regards

    In promiscuous mode your sensor doesn't affect the traffic but it only listen and analyze it.
    In inline mode you direct all your traffic on this network segment you want to protect to IPS and it analyze it and block some actions according to your settings.
    It is the main difference. Which mode to prefer must be your decision.

  • IPS error

    Hello,
    I am using IPS Version 7.0(2)E4 and whenever i try to add a new device i get the error shown in the attached image.
    I thought it might be something related to my Java version, but i updated it to the latest and the problem persists.
    Any idea on what the problem is?
    Thank you!
    Fabienne.

    Hi Sawan,
    I ran the command, the error changed to this

Maybe you are looking for