IPsec connection via Windows 7 (RV110W)

Hallo zusammen
Ich würde gern eine Verbindung mit dem Windows 7 VPN Client via IPsec zu einem unseren anderen Standorte aufbauen.
VPN via PPTP oder mit dem Cisco Quick VPN Tool funktionieren ohne Probleme.
Die Fehlermeldung lautet, das er keine Verbindung zum Server aufbauen kann, auch von meinem iPhone funktioniert es via IPsec nicht.
Hat einer das gleiche Problem oder muss ich noch etwas anders einstellen? Den UDP Port 500 & 4500 habe ich freigeschaltet.
Oder kann die Firewall keinen Server via IPsec stellen?
Danke für euer Feedback!

Unfortunately Windows 7 is not yet in its final release. Just like what happened to VISTA before it was intruduced got some compatibility and driver problems. There are only few adapters that can work with Windows 7 and usually it is a 802.11g adapters. Anyway don't loose that N adapter that you have once the Windows 7 is finally released I think Linksys will be able to introduce updated drivers for their devices.
Regards,
Lord Maxthor

Similar Messages

  • I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.  When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right h

    I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
    When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
    I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
    I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
    nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Connect via Windows Powershell in SCCM 2012 CONSOLE (with PowerShell 4.0 installed)

    Hi,
    When trying to "Connect via Windows Powershell" in the SCCM 2012 console, I get the message that Powershell 3.0 is not installed... (which actually isn't installed, we have PS4.0 installed). Do we need to install PS3.0 also to get it working
    or is there a workaround? Connecting manually to the site via Powershell 4.0 (Get-Psdrive -psprovider CMSITE) works like a charm.
    Regards,
    WiM

    Hi,
    I have installed WMF 4.0 on Windows Server 2008 R2 sp1, it works fine.
    Please try to use "$PSVersionTable" to confirm Powershell version is 4.0. At first, I forgot to install Microsoft .NET Framework 4.5, then the console gave me the message that Powershell 3.0 is not installed.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Connecting Via Windows FTP Service

    I recently moved several sites that used Contribute to a new
    webserver (Windows 2003 running IIS 6). The server uses Windows FTP
    Service.
    To create a FTP account I created a Windows Account and then
    a Virtual FTP directory with the same name as the windows user and
    pointed that virtual directory at the root of the site I want to
    update with contribute. I gave the Windows account full control on
    the site root folder. I can FTP connect via Internet Explorer and
    the command line.
    When connecting via contribute I get an error saying
    The directory you specified does not exist. Please make sure you
    entered the directory name correctly. On some servers,
    file/directory names are case sensitive"
    Contribute seems to be trying to change directory to a folder
    with the same name as the FTP virtual directory, rather than to the
    folder that the virtual directory points at.
    here's the error log from contribute
    Date: 11/27/2006
    LocalTime: 14:07
    Host: 80.76.207.49
    Port:
    LoginID: myFTPUserName
    Path: /myFTPUserName/
    Passive Enabled: false
    ProxyHost: NoneContribute Alternate Rename: no
    Contribute Optimized: yes
    ======================== Test Results
    ==========================
    NOTE: Microsoft FTP Service has been detected. For more
    information on FTP server compatibility issues, please see
    http://www.macromedia.com/support/contribute/ts/documents/ftp_info.htm
    Login: SUCCESS!
    Changing Directory To: /myFTPUserName/ Error. The directory
    you specified does not exist. Please make sure you entered the
    directory name correctly. On some servers, file/directory names are
    case sensitive.
    ----------------------- FTP log from the last operation
    > CWD /ftp
    < 550 /ftp: The system cannot find the file specified.
    > CWD /ftp/
    < 550 /ftp: The system cannot find the file specified.
    > CWD /
    < 250 CWD command successful.
    > RNFR ftp
    < 550 ftp: The system cannot find the file specified.
    > MDTM ftp
    < 550 ftp: The system cannot find the file specified.

    Hi!
    I think the windows service is using a different systemaccount that your other application, and that account does not have rights to read the sbo-common database.
    You can change the account used by your service on the service definition or in the SERVICES application of Windows.
    Sir Harold

  • Connection via Windows Remote Desktop

    I want to connect my BlackBerry with the BlackBerry Desktop Software which isn't installed on my local machine but on the computer to which I connect via the Windows Remote Desktop (both are Windows XP Professional). It has worked fine with my old Phone and Microsoft ActiveSync but not with my new BlackBerry. Does anybody have any experience with this scenario?
    Many Thanks in advance!
    Paul. 

    you are connecting it to local hardware(PC), how will the remote PC know. it's not posible, please install desktop manager on your local PC.
    Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

  • Customizing single user connection via Windows remote desktop

    Hi, 
    I would like to know if its possible to configure Windows Remote Desktop in a way that if a user is already logged on to a particular computer and another user tries logging in, an error message appears on the screen saying that a user is already
    logged on. 
    I can limit the number of connections to 1 via:
    Local Group Policy Editor > Admin Templates > Remote Desktop Services > Remote Desktop Session Host > Connections 
    However, with this option, the error message that comes up on the screen is the following:
    'This computer cant connect to the remote computer, try again or contact the network administrator'.
    Is it possible to configure this in a way to let users know why they cant login so they don't think its an IT fault? 
    We are using Windows 7 on both the clients and the host. 
    Any advice would be much appreciated..
    Thanks,
    Seema 

    Hi Milos,
    No its not a server operating system.
    The PC that we are connecting to is running Windows 7.
    We are connecting to it using Windows Remote Desktop.
    Thanks,
    Seema
    Hi Seema,
    As Licensing agreement said, for Windows 7, you can only has one connection on this PC via RDP.
    If another user wants to connect this PC via RDP, he will be notified you another user who has already logged in.
    Kate Li
    TechNet Community Support

  • Using IPSec to connect from Windows 2012 to a Sonicwall

    In order to establish an IPSec connect from a Windows 2012 Server to a SonicWall, you must first connect to the sonic wall via L2TP or PPTP? 
    Can someone confirm this is correct?
    Thanks. 

    Hi,
    Thank you for posting in Windows Server Forum.
    As per my research, generally when we are implementing IPsec connection we use PPTP as a connection method. PPTP, L2TP, and SSTP depend heavily on the features originally specified for Point-to-Point Protocol (PPP). PPP was designed to send data across dial-up
    or dedicated point-to-point connections. For IP, PPP encapsulates IP packets within PPP frames and then transmits the encapsulated PPP-packets across a point-to-point link. PPP was originally defined as the protocol to use between a dial-up client and a network
    access server.
    More information.
    VPN Tunneling Protocols
    http://technet.microsoft.com/en-us/library/cc771298(v=ws.10).aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

    I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine.  Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
    The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection.  Sharing is also turned on in the Windows printer control panel for this printer (under properties).  The Mac is a G5 running 10.5.8.  When I try to print a page from the Windows machine it gets hung in the print queue.
    Any advice how to proceed would be appreciated!
    thx,

    I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine.  Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
    The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection.  Sharing is also turned on in the Windows printer control panel for this printer (under properties).  The Mac is a G5 running 10.5.8.  When I try to print a page from the Windows machine it gets hung in the print queue.
    Any advice how to proceed would be appreciated!
    thx,

  • Cannot connect via cable on Windows XP home SP2

    Good Afternoon,
    Maybe you can assist me here.
    I cannot connect via cable my N91 (4 gb hdd) to Windows XP Home SP2. I can however connect via cable to my work computer which has the OS Windows XP Pro sp2.
    In both cases both OS's are up to date, I have updated the phone OS to v2.10.013 RM-43. I am using the most up to date drivers that is available on nokia.com as well as the current ed of PC Suite (6.82.22.0)
    The following is the steps I followed in both cases starting with XP Pro
    1. Installed Drivers
    2. Installed PC Suite
    3. When prompted by PC Suite connected Phone via cable to Computer, further install steps were required. No reboot required. PC Suite then picked up phone
    XP Home
    Followed steps 1 + 2 in the same order
    3. Connected N91 to XP Home computer, after driver install activity rebooted computer as requested. Disconnected N91 On reboot to desktop, in PC Suite I clicked on Get connected. Select Cable connection when prompted attached cable to computer and then to phone, on the phone select PC Suite. .
    At this point I get the hour glass and nothing happens, Next is ghosted. It has been like this for 20 mins.
    I have uninstalled both the drivers and the software. For some reason the updater can connect to the phone.
    Can you advise on what I can do.

    Hi
    Sounds lik ethe PC is having issues seeing it. Try this
    /discussions/board/message?board.id=pcsuite&message.id=11480
    Try this first:
    1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
    3. Select "PC Connectivity Solution", click "Change" and then "Repair".
    4. After Repair, restart PC
    music

  • Can i connect via vpn on a mac to a windows computer

    I know this question has probably been asked a number of times but:  Can a Mac be used to connect via a VPN connection to a Windows machine?  I need to do this to access a Windows desktop via remote access.  Have not found a way to do it yet.

    Yes, it can. Restore it on the PC; doing so on the Mac will put it in a format the PC can't use.
    (79280)

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • Competition problem between Windows 8.1 and Windows 7 on Photosmart C5180 connected via LAN

    Hello everyone, I am writing because I need some advice / help on a problem last night while configuring a small network.
    The network is made up as follows:
    2 notebook: Windows 8.1 and Windows 7
    3 different printers:
    2 USB connected to the respective notebook,
    1 HP Photosmart C5180 network printer connected via LAN via a router.
    The situation is the following:
    both notebooks recognize the various printers and are able to send and print documents but,
    when the print command starts from both notebook SIMULTANEOUSLY or at a distance of a few seconds, the only document printed is ALWAYS the one sent from the notebook with WINDOWS 8.1. The other one submitted by WINDOWS 7 IS LOST without being reported.
    So if I ask of you is someone experienced in the print queues, print drivers, competition in the print jobs that can help me in solving this problem.
    Thanks in advance

    Hello cesco,
    Welcome to the HP Forums.
    I see that you are having a communication issue when attempting to print on two separate printers at the same time.
    This will be a communication issue for sure.  The computer can only send to one printer at a time. You will have to print to one printer, wait for it to finnish the print job and then send it to the other printer. 
    There is no way that you can print from one computer to two separate printers at the same time.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Cannot find other than "Camera Roll" in my PC when my iPad2 is connected to Window 8.1 via USB to my Lenovo PC

    When my iPad2 is connected to Window 8.1 via USB to my Lenovo PC, I can not find Albums other than the Camera Roll. Is there a method by which I can make other albums visible to my PC? I am trying to copy them manually into a portable harddisk so all my photos and Videos in my iPad and iPhone will be backed up in one location for convenient access of all my photos & Videos.

    Use windows Import utitlity is the only other way I do believe

  • Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

    On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
    The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
    NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
    Hence I think that it's very likely that this is a Windows-specific driver issue.
    Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

    skn2011 wrote:
    My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
    Are you using the Apple adaptor or a 3rd party

  • Hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

    hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

Maybe you are looking for