IPSEC pass-thru

Does the newest IOS allow IPSEC to pass-thru??
Here is my situation. I have have a 2514 with many internal addresses overloaded to one public address and Cisco VPN client doesn't work many to one translation. What is my best bet??

Yes, 12.2(13)T should support this now. See http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftnatesp.htm
That command reference is horrible though, I think what it's trying to tell you is that you don't need to do anything on the router other than configure NAT overload, the router should do the rest for you automatically.

Similar Messages

Allow IPSEC traffic thru 871?

I am using Cisco 871's with Advanced IP Sec IOS for remote offices. I need to allow IPSEC traffic to pass thru the 871 to establish a client IPSEC tunnel. The client VPN software is Nortel's Contivity VPN.
How can I allow IPSEC traffic to pass thru the 871?

If you are initiating vpn client connectivity from behind the 871 to outside you need to allow through the IPsec ports udp 500, udp 4500 and protocol 50 esp. I don't know Nortel's vpn client but Im sure they follow the Ipsec security standards.
try this on your 871 router.
access-list 101 permit udp any any eq 500 log
access-list 101 permit udp any any eq 4500 log
access-list 101 permit esp any any log
apply acl-101 to your outbound interface
access-group 101 in
HTH
Jorge

I would like to connect my Apple TV to my receiver using an HDMI cable and pass thru dolby digital. I do not have optical inputs on my receiver.

I want to connect my Apple TV to my receiver using an HDMI cable. This should allow me to pass thru high definition video and simultaneously decode Dolby Digital material with an HDMI connection from my receiver to my TV without the use of an optical cable (my receiver does not have an optical input). I am unable to decode 5.1 material and don't understand why this is not working. In the audio setting I have Dolby Digital output turned on.

Welcome to the Apple Community.
Are you sure the content you are playing has Dolby Digital.

Can I use Apple TV as an ethernet pass-thru?

If I use wifi to connect Apple TV to my network, can the ethernet port on ATV be used as a "pass thru" to get internet to another device?

no when ethernet is connected wifi is disabled
it offers no kind og routing or switching or hotspot abilities

How to make udp datagram pass thru proxy server?

I have to make a video stream system. And I found that there are a lot of user is behind the firewall or proxy server, how should i do to make the udp streaming media pass thru the firewall or proxy????
does the https tunnel help?

Thanks for your advise, but does http tunnel only accept for the TCP problem? since my server will broadcast a stream of udp to the user, so how should i do that?

Use of LEFT, MID functions in MS Access expression evaluating a SQL pass-thru on an Oracle Backend

As the title above suggests this is a somewhat complex problem.
I have the following expression on a field in a MS Access Make Table query.
Left([SYN4_View Invalid Last Candidates]![LastName],3). The table it is referring to: SYN4_View Invalid Last Candidates is a SQL Pass-thru query on an Oracle backend. So, when the expression attempts to evaluate in MS Access 2003 I get the following error msg:
Undefined function 'left' in expression.
I am assuming this is because LEFT function can't evaluate the output of the SQL P-T. I can't use SUBSTR as Access doesn't recognize it.
I would appreciate suggestions

robleh7 wrote:
I don't have access to the Oracle dB. No pun intended here. Everything I do, I must do from the MS Access 2003 front-end
wow .. that's kinda like sending soldiers into a war zone with a bear trap attached to their legs. O_0
Kind of blatantly trying to hamper your ability to do your job, don't you think?

Looking for an docking station for DV9205us that has power pass-thru

I have an HP DV9205us and am looking for a docking station that has a power pass-thru. The power plug on my latop doen't always power up the laptop and this has gotten on my nerves. Is the ES631AA#ABA the only docking station that works with the DV9205us

Thanks for the link.
Hadn't seen that review, but it matches what I conclude about that particular model - there's still lots of connecting & disconnecting to do. It has only one USB port docked, and another one sitting up top. I have many items I'll be attaching via USB, such as Wacom, backup drive, external drive for photos, mouse. And would prefer a Powered version so I don't have to connect the power cord each time either. And if you notice that video, he shpws his desktop consisting on nothing but a keyboard & a monitor. So with the lid closed on the MBA, how's he move the cursor around? Missing a mouse there. (Yes - he could have a wirelesss mouse, but personally, I find a wired mouse much better - but he has NONE.
Hoping to find someone who has actually used one.
From my research, it seems the Landing Zone MAY do what I want, but I can't get answers from them to questions. They have units for 2012 - 2013 MBA's, but I don't see anything on their site about the 2014 model I have.
And there's a few other brands out there - but seeking real life experiences.

How to make rtp udp datagram pass thru proxy server?

I have to make a video stream system. And I found that there are a lot of user is behind the firewall or proxy server, how should i do to make the udp streaming media pass thru the firewall or proxy????
does the https tunnel help?

Tunnelling with HTTP is the only way.

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

Web Elements 2.0 Pass Thru HTML

Hello, I am reading the Web Elements 2.0 doc from the ZIP file on the Diamond site and it says you need to enable pass thru html on the BO Enterprise Server.Are they referring to the Internet Server here or the BOE XI server??we are a distributed installation with BOE XI on one server and Microsoft IIS on another.Here is the registry entry[HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Components\DHTMLViewer] 'EncodeHTMLForSingleLineFieldObjects"=noThanks,Randy

You are correct.You need to enable pass through HTML on the Web Server not the BOE Server. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

Pass thru authentication error message customization

Dear All,
I'm trying to customize the error messages displayed during the authentication failure.
Users are authenticated against the AD i.e. pass thru authentication.
I'm not able to customize the error messages.
I have searched in WPmessgaes and RAMessages file. no success.
following is error:
AD (Windows Active Directory):Error: missing required authentication information: 'password'
new error msg that I want to display:
Error: Invalid login credential, please try again.
Kindly share your ideas and experience on same.
Thanks in advance.
Cheers:
Amar

We've had that problem. We opened a ticket with Sun and they confirm it as bug in 7.1.

Pass-Thru Authentication OIM 11g

Is there any documentation on configuring pass-thru authentication in OIM to an AD or LDAP instance?
Thanks

Apparently, this does not exists for OIM. I need to put a OAM instance in front of OIM in order to authenticate against AD

Printing using raw pass thru mode with PCL 5e

I have an HP LaserJet P3015 printer on our network and have been doing some testing for a company that needs this printer to work.
We have an application that writes using a network connection to pass thru in RAW data mode to the printer device. We use a set of print commands using the PCL 5 control character commands for CR, LF, TOP of Page etc...
With the new printer and drivers, for some reason, we get a blank page printed after each 1 page document we send.
This software has always worked in the past with earlier versions of printers and drivers.
We are using Windows XP.
We are using the LaserJet P3015 PCL 5e drivers
Any help would be appreciated.
PS. We already tried the postscript, universal and PCL6 drivers and they do NOT work.

Hi,
first of: I haven't tried anything of this myself due to lack of a XBox and/or other applicable devices.
But this Apple article http://support.apple.com/kb/HT3924 includes the following paragraph:
+"The Mini DisplayPort in the 27-inch iMac can receive only DisplayPort compliant video and audio signals. Converters not made by Apple may provide options to convert other electrical, video, and audio protocols to Mini DisplayPort compliant signals."+
To me that sounds like what you want to do is indeed possible.
But since Audio-Thru is not an OSX feature you might also have to use the freebie LineIn from RogueAmoeba http://www.rogueamoeba.com/freebies/ to get the audio signal from the MiniDisplay Port-In to the headphone out.
Hope it helps
Stefan

Pass-thru authentication against AD

Hellos,
When using pass-thru authentication against the AD resource, the manual suggests that the user enters the complete DN of his/her AD account as the IDM login ID!!
Can it be arranged so that the user only needs to enter the samaccountname and not the complete DN.
I mean, samaccountnames are as unique as DNs. A simple lookup to get DN (if samaccountname is found) is all that is needed.
When shown to customers, they express horror when it is suggested that to login to IDM they have to type 50 odd characters!
Does any customer willingly USE pass-thru where they have to (correctly) type in such a lengthy string.

The answer is yes, you can use samaccountname. Your deployment may necessitate additional configuration to make this happen.
In our case, the samaccountname is the same as the IDM accountId. When the user logs in, IDM finds the user object and then uses the password against the AD account linked to the user.
If the accountId and samaccountname are not the same, then you could use a Login correlation rule to find the IDM user which has that samaccountname.
As far as anyone using the full DN to login with, I've never seen anyone do it. Our users certainly wouldn't stand for it, and I think that's the case most places.
Jason

E1200 as a pass-thru wired router only.

I am looking for some extra guidance on the E1200 as only a wired pass-thru router to maintain a subnet and keep it isolated from the rest of the connections to the Broadband router and wireless. I have a public IP address that is set as pass-thru on the Broadband router and I am able to access some things on the internet from the E1200 subnet. I am having issues with connections to Windows Update from the SBS server and the workstations. I am wondering if there is a special setting I am missing. I have wireless disabled, and most everything else set to basic. There is no login, so it is set to Static IP and the IP address, subnet mask and gateway address are correct. I have specified 3 DNS Servers and they are all correct. I want to shut off the DHCP, but currently have it on per suggestion from Broadband tech support. Any suggestions would be appreciated.
Thanks,
Robert

Test if you have the same challenge if connected straight to the modem. Don't disable the DHCP of your router, since it will cause the unit to act as a switch. If you do not have the same problem when connected to the modem, configure DMZ on the router's user interface.
While connected to the Linksys router, access the UI. Instructions are available in this link: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3676.
Go to 'Application & Gaming' tab > click the 'DMZ' sub tab > configure the 'Source IP Address' to 'Any IP Address' > configure the 'Destination' to the IP address of the computer (It is best if you set static IP on the computer).

IPSEC pass-thru

Similar Messages

Maybe you are looking for