IPSEC Support in 6500 Code?

Guys does anyone know if the most recent 12.2 IOS code for the 6500 (sup 720) is capable of doing IPSEC VPN's without the VPN module? I can't seem to find a definitive answer to this on the website.
Thanks!

Hi,
As you can see on the release notes for for example 12.2(18)SXD:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.ht
m
"The k9 images support SSH 3DES access and the IPSec Network Security feature (configured
with the crypto ipsec command) in software"
This is not a good idea to use 6500 to use for software 3DES for encryption and decryption
and we DON'T recommend to use 6500 for VPN without having VPNSM.
This probably is not regarded as a valid/advised configuration...
Please rate helpful posts.
Regards,
~JG

Similar Messages

Error in application accurred please call support quoting error code 2907

error in application accurred please call support quoting error code 2907

I suggest you call support and quote error code 2907.

I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

Hi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

MAC osx SUPPORT for 6500 classic

i am a new owner for the 6500 classic and wondered why nokia dont list this phone under the mac support?
does any one have any recommendations of software/plugins i can download for mac tiger 10.4 that will sync with ical etc etc but that will work with a wide range of phones? or a generic syncing software. most dont seem to support the 6500 !!

I have downloaded two third party plugins, one from NOVA, only to find out that they don't work with iSync 3.0. Nokia of course told me it would not be a problem to get a plugin!!! Does anyone know where it's available?
30-Oct-2007 01:07 PM
fezrodriguez wrote:
i am a new owner for the 6500 classic and wondered why nokia dont list this phone under the mac support?
does any one have any recommendations of software/plugins i can download for mac tiger 10.4 that will sync with ical etc etc but that will work with a wide range of phones? or a generic syncing software. most dont seem to support the 6500 !!

Dear Sir, i have problem in my Iphone 5 that during receiving any calls always appeare message that error in application occurred please call support quoting error code 2907. I need to solve my problem

Dear Sir, i have problem in my Iphone 5 that during receiving any calls always appeare message that error in application occurred please call support quoting error code 2907. I need to solve my problem.

The problem this message always appeare when receiving the calls and requesting either accept or cancel.
Can you advice me if i have wrong application or i need to remove some applications.

Report sould support multiple company codes and currencies

Hi Experts,
I had requirement, my report should support multiple company codes and currencies. Right now it is supporting 2 company codes and currencies(EUR, USD) only. Now the report should support all copmany codes and currencies.
I had analyzed report. In the report there are class and authorization objects. In this authorization objects, they may be any chances of maintaining company codes and currencies? This is regarding PS Module.
Need ur suugestions to solve this issue...
Regards,
K. Bharat

Hi raja,
Could you share what you had to do to attain this functionality? I have the same requirement.
Thanks,
Kiran

"Unknown error : Support information ; Security Code - 359"

I've got a user who is attempting to input his digital signature however upon doing so he receives the error message "Unknown error : Support information ; Security Code - 359"
Does any one eccountered this problem and knows how to fix it?

I think that you may have the answer already, contact iTunes Store Support. I see more users posting about purchasing problems with that game than I have ever seen with any other game or App since I have been participating here over two and a half years ago.
Email iTunes Store Support and seek their help.
https://expresslane.apple.com/Issues.action
If you really want to try something other than contacting support, try signing out of your ID, restart the iPad and sign into your ID again. Then try to update the information again. I do believe that you will have to contact iTunes Store Support in order to resolve this.

Does mac os x 10.7.5 support running x code?

does mac os x 10.7.5 support running x code?

Yes. 4.6.3 is the latest version that'll run on Lion. That said, AFAICT, you can only get Xcode 5, via the MAS, which requires at least 10.8.4. Get Xcode says you can get earlier versions from the development center, but that requires registering for a free account: register as a developer at Apple Developer.

Accrual No accrual run supported in company code 1000 on 16.12.2007

Hi,
I am running an accrual engine. T code ACACACT. I am getting a following error "No accrual run supported in company code 1000 on 16.12.2007".
Please help me on this. Its urgent.
Points will be allotted.
Nitin

Hi Nitin,
Please check your settings in define posting controls.Check the frequency of that particular accrual type.Might be you have taken monthly.(The menu path is IMGFAcctngGL acctngBusiness transactions-accrual engineAccrual/deferral postingdefine posting control)
Thanks
Aravind
Assign points if useful

I sync support Nokia 6500s ?

I want to ask i-sync can support Nokia 6500s or not ?
Because I used bluetooth to do the connect ,but not work.
Or any third party app can sync with mac ?
Thanks !
Message was edited by: A i R

try this:
http://www.novamedia.de/epages/e_produkte_mac_isyncplugins.html
hth

Does Prime Infrastructure 2.0 support 7.5 code?

I am currently running PI 1.3 and plan on upgrading to PI 2.0. Are 5508 Wireless Controllers 7.5 and MSE 7.5 code supported in release PI 2.0?

PI 2.0 was really intended for the converged access, but it will also support v7.5 and PI1.4 supported v7.5.
Management Support for WLC Release 7.5
Prime Infrastructure 1.4 provides management support for WLC Release 7.5 and associated features. In addition, this release provides support for AP platforms such as 3600P and 802.11ac module.
For more information about Cisco Unified Wireless Network (CUWN) Software Release 7.5, see the product bulletin at the following URL:
http://www.cisco.com/en/US/products/hw/modules/ps2797/prod_bulletins_list.html
For more information about the features of WLC Release 7.5, read the Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 7.5 available at the following URL:
http://www.cisco.com/en/US/products/ps10315/prod_release_notes_list.html

Solaris 9 IPSec support

I am currently attempting to activate IPSecurity on Solaris and I am having a host of issues. I am hoping someone on the forums have done this before.
Here are the steps that I have figured out:
1) Create Certificates and add them into the database: I am fairly certain that this has been done correctly since when the in.iked daemon comes up it reads in my CA certificate and my server certificate that I have created.
2) Edit the /etc/inet/ike/config file. I have edited this file but there is an odd thing here. Looking at the man page it says that I should be able to do use AES for the phase 1 SA. However when I use the key word for the aes it tells me it is an error. <Question> Is the AES support only on 10? Is there away I can tell the version of the in.iked daemon I am working with?
3) Activate the in.iked server with the config file. I have done this and used the -p2 -d options so I can see the log file that goes with it.
4)Update the /etc/inet/ipsec.init file: I have done this but here is another instance that things do not make sense. I create a phase 2 proposal devoid of all encryption algorithms and the default one came up. It only had AES and Blowfish. There was no Triple DES option available even though in the man page is there. <question> how do I get the version number of the ipsecconf command.
5)I then use the ipsecconf command to suck in the ipsec.init profile. I have done this successfully with AES and can do a list display.
Usage<<<< I attempt to run a traffic from my solaris to my partner machine that matches the phase 2 traffic descriptors however when the traffic arrives it is not encrypted and the solaris did not attempt to negotiate a tunnel.
When I attempt to initiate a VPN from the other side all I get is parameter mismatch on the Solaris side however the parameters that I have configured all seem to match.
<Questions>
1) Is there some better messages available above -p2 -d
2) Is there a way to initiate a phase 1 negotiation on the SA. ikeadm command does not seem to have that.
3) Is there a service that I have to activate to start the IPSecurity pieces?

http://www.sun.com/servers/coolthreads/t2000/specs.xml
no.
Darren

Is there any tools or supported tools for codes check in/out?

When a project is in a large scale, we usually will divide the system into several modules. Each one responsible for a module. Under such situation, when a programmer tries to modify his/her module code, the problem seems to have less impact. However, in case of development involving common files, I would like to have better control about program update to avoid the conflict of program versions (Just like the Visual SourceSafe supported by Visual Basic) Is there any tool like that?
Thanks for any advise!

Hi,
JDeveloper supports three SCM systems out of the box which provide this kind of functionality:
o Oracle Software Configuration Manager (SCM) is Oracle's own source control system. It's built on the Oracle database so is highly scalable and performs well. It also has a very high level of integration into JDeveloper and has been supported in the product since JDeveloper 3.2. More information here: http://otn.oracle.com/products/repository/content.html
o CVS, probably one of the most commonly used SCM systems around because it's free, open source and very easy to use. There's a very high level of integration for CVS in the 9.0.3 version of JDeveloper. CVS doesn't scale very well to large teams, however. More information: http://www.cvshome.org.
o ClearCase, a popular source control system from Rational Software.
We don't currently support Visual SourceSafe, although we're investigating the best way to provide this in the near future.
Thanks,
Brian
JDev Team (SCM)

Do new FLASH CS3 support s AS2 codes ?

Hi folks . . .
When we use AS3 development tools , will old flash codes (
AS1 and AS2 ) work correctly after this ?
And can we use AS2 codes by flash cs3 tools ?
Do ADOBE support AS1 and AS2 codes for a long time ??

Yes. Flash CS3 is pretty much Flash 8 with new features and
support for what
it supported before (AS1 and AS2) and more (now additionally
AS3)
"firatadobeturk" <[email protected]> wrote
in message
news:f2l4f9$9i3$[email protected]..
> Hi folks . . .
> When we use AS3 development tools , Do old flash codes (
AS1 and AS2 )
> will work correctly after this ?
> For a long time , does ADOBE supports , AS1 and AS2
codes?
>

In Support Message T-Code Details and Screen Number details missing

Hi,
We have configured Service Desk in our landscape. When any message is raised through Service Desk we can track the message through CRM_DNO_MONITOR but when we double click the message to see the message details we go to Transaction Tab but here in the Overview Tab we could not see the details regarding Transaction Code details and Screen Number Details for the Support Message.
Kindly help in the case.

One thing I have had trouble with is the authorizations for the user in the RFC destination in BCOS_CUST of your satellite system; give that user SAP_ALL temporarily in your SolMan system and try to send again. Also, just to be sure make sure the user on the satellite system creating the ticket as SAP_ALL on that system. Then of course remove SAP_ALL.
I still strongly recommend biting the bullet and installing 7.1 now if you are just starting to use Service Desk. Good luck,
David

IPSEC Support in 6500 Code?

Similar Messages

Maybe you are looking for