Ipsla ipm

Hello,
I try to make a collector in Ciscoworks IPM and i always get the same error.
I choose source and target devices, operation (udp jitter) and i can't
go further.. i always get the same error:
it says:
Only Responder - enabled devices permitted for selected operation(s)
. Please enable IPSLA responder for the selected Target device and then click Update IPSLA Config button on the Device Management page.
Do i need to enable something on each devices before configuring collectors ?
both switches are at ios 12.2(44)
thanks for your help

You need to connect to your desired target device(s), and configure:
ip sla responder
Or, for older code:
ip sla monitor responder
Or, for even older code:
rtr responder
Depending on your version of IPM, you may then need to delete this device from IPM, and resync it. The latest version of IPM will let you resync with the device to learn that the responder is enabled.

Similar Messages

What target address does IPM select if the target IPSLA device is a multi-VRF CE?

What target address does IPM select if the target IPSLA device is a multi-VRF CE?
With IPM 4.2.1 it is not possible to select the correct target IP address when configuring a collector between two multi-VRF devices. It looks as if the primary management address for the target device is used in the collector configuration which, of course, belongs in a different VRF entirely.

One example, and there may be others, is the (free) DynDNS dynamic DNS service which publishes a domain name for the WAN port of your router which can then be resolved, like all other domain names, to the actual IP address of the WAn port of your router. This service provides a solution to the problem of having a proper domain name in cases where your public IP address changes over time. Unless you pay for a static IP address, virtually all ISPs change your public IP address over time.
So, you can register for a free DynDNS account at www.dyndns.com and that is how you come up with the User: and Password: information; use whatever User and Password you register at dyndns.com with.
The first part of the hostname you can define as you wish, subject only to someone else having used it previously, and the remaining parts of the domain name might be "dyndns.org" or one of the other domain names provided by the DynDNS service. So, you could publish, via DynDNS, the name of your public IP address as, for example, joehlam.dyndns.org however you might want something less descriptive or more vague.

IPSLA/Perfromance/IPM: syslog message on collector down/failed

Dears,
Customer is upgrading from ciscoworks SNMS and they feel they loose a lot of valuable info.
They now have a few maps that give an at a glace state of the network. There is little I can do in LMS 4.1 to cover that.
The main problem for now is alerting on a host that runs a service like smtp, dns, etc and some hosts that should be pingable.
I'm trying to configure a collector on "IPM/ IPSLA/Performance" to run tests like echo, smtp and dns from a few central devices.
I think a IPSLA device it is capable to send syslog messages when the collector action 'fails' right?
Does anyone know what these messages look like?
I'd like to generate an alert using the syslog automated actions so I need to know what I can expect, provided my asumptions are correct.
Cheers,
Michel

I am amazed.
When I use LMS to configure the devices to send IPSLA SYSLOG it configures ..... traps!
"IP SLA jobs for syslog configuration"
rtr logging traps
ip sla logging traps
ip sla monitor logging traps
I found this other thread https://supportforums.cisco.com/thread/176841
It seems what is being said in LMS help and on cisco.com is perhaps somewhat misleading.
It can send traps not syslogs.
Now looking at the helpfile I get the impression someone is confused about syslog and traps
"IPSLA Syslog Configuration
Syslog is a trap message that is sent from the device if any changes occur to the device. You can either enable or disable the IPSLA Syslog. However the IPSLA Syslog can be configured only by a Network Administrator or System Administrator.
The Device Selector will display only the Source devices that are IPSLA enabled. It does not display any Target devices.
To enable or disable IPSLA Syslog: "
A SYSLOG message is not a trap message!.
Can someone shed some light on this?
Can I get LMS to act upon a failing collector?

LMS4.0/IPM: can't configure a dns collector

Hi,
Customer has lms 4.0 on windows.
He can't create a dns collector on IPM :
When we look at config device, device supports dns collector:
device_name #sho ip sla mon app
        IP Service Level Agreement Monitor
Version: Round Trip Time MIB 2.2.0, Infrastructure Engine-II
Time of last change in whole IP SLA Monitor: 10:50:17.069 METDST Wed Apr 20 2011
Estimated system max number of entries: 30321
Estimated number of configurable operations: 30320
Number of Entries configured : 1
Number of active Entries      : 0
Number of pending Entries     : 0
Number of inactive Entries    : 1
        Supported Operation Types
Type of Operation to Perform: dhcp
Type of Operation to Perform: dns
Type of Operation to Perform: echo
Type of Operation to Perform: frameRelay
Type of Operation to Perform: ftp
Type of Operation to Perform: http
Type of Operation to Perform: jitter
Type of Operation to Perform: pathEcho
Type of Operation to Perform: pathJitter
Type of Operation to Perform: slm atm interface
Type of Operation to Perform: slm atm pvc
Type of Operation to Perform: slm controller
Type of Operation to Perform: slm frame-relay interface
Type of Operation to Perform: slm frame-relay pvc
Type of Operation to Perform: slm interface
Type of Operation to Perform: tcpConnect
Type of Operation to Perform: udpEcho
Type of Operation to Perform: voip
IP SLA Monitor low memory water mark: 41392015
Many thanks for your help,
Elisabeth

There is no default DNS operation because a DNS operation requires one to specify the DNS server. Before DNS will show up in the create collectors interface, you must create a new DNS operation under Monitor > Performance Settings > IPSLA > Operations.

Monitoring Cisco ASR 1002 with IOS-XE in IPM 4.2

We are running LMS 3.2 with IPM 4.2 installed....and we are looking to do IPSLA monitoring on a couple of our Cisco ASR's with IOS-XE code installed.
I looked at the IPSLA feature mapping and it only talks about supported IOS code....do we need to upgrade our current IPM module to a current version?

Hi Konstantin,
Regarding "It is strange that these commands cleaned from sh run view.": this is normal for many default configuration commands.
Mine is a lab device so I cannot really comment on stability or provide you a recommendation based on that. However, I see that the download section from Cisco.com mentiones the following release as the recommended based on quality, stability and longevity:
asr1002x-universal.03.07.04a.S.152-4.S4a.SPA.bin
The best would be for you to check this with yor cisco Account Team or Advanced Services Team as normally they are the proper point of contacts for SW advisory.
Regards.

Help building DSN for IPM database.

All,
I need help creating the ODBC Data Source on windows for connection to the IPM database. I have successfully connected to the cmf and rmeng datasources. However, the dbViews_401.pdf does not provide the TCP connection parameters for the IPM/IPSLA database like it does for the the other LMS dbs. Any help you can provide is much appreciated. Looking for DSN name, Server Name, whether or not a Database Name is needed and what the TCP options would be.
Thanks
Anthony

Since the port numbers for cmfDb, etc. didn't change between LMS 3.2 and LMS 4.1, it's probably a good bet the IPM db access port is still 43280 in LMS 4.0.1. Compare and contrast:
"Open Database Schema Support in CiscoWorks LANManagement Solution 3.2"
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/database_schema/guide/dbviews.pdf
"Open Database Schema Support in Cisco Prime LAN Management Solution 4.1"
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/database_schema/dbviews_41.pdf
Also, the KB article at https://supportforums.cisco.com/docs/DOC-8796 mentions "You can use the listdsn argument to dbpasswd.pl to get a list of all DSNs." and has them enumerated in a table.

IPM and dynamic user tracking not running properly.

Hello, I've got two problems after a reinstallation of CiscoWorks LMS 3.2.
Versions of software components:
LMS-3.2
Campus Manager-5.2.1
CiscoView-6.1.9
CiscoWorks Assistant-1.2.0
CiscoWorks Common Services-3.3.0
Device Fault Manager-3.2.0
Integration Utility-1.9.0
Internetwork Performance Monitor-4.2.0
LMS Portal-1.2.0
Resource Manager Essentials-4.3.0
First probelm I have sounds pretty much like this thread:
https://supportforums.cisco.com/message/3064784#3064784
Source device is a WS-C3560-8PC - 12.2(55)SE1 - C3560-IPSERVICESK9-M
I configured a IPM collector, if I have a look at the "Collector Management" the collector is running and I can also monitor the running collector.
But if I have a look at the running config of the switch, there is no ip sla collector configuration but I can see the ip sla statistics via the show command.
#sh ip sla configuration 135123
IP SLAs, Infrastructure Engine-II.
Entry number: 135123
Owner: ipm|XXXS1077
Tag: QA-Site1-Site2
Type of operation to perform: udp-jitter
Target address/Source address: target ip address/source ip address
Target port/Source port: 2000/0
Type Of Service parameter: 0xB8
Operation timeout (milliseconds): 5000
Codec Type: g729a
Codec Number Of Packets: 1000
Codec Packet Size: 32
Codec Interval (milliseconds): 20
Advantage Factor: 12
Verify data: No
Vrf Name:
Control Packets: enabled
Schedule:
    Operation frequency (seconds): 60
    Next Scheduled Start Time: Start Time already passed
    Group Scheduled : FALSE
    Randomly Scheduled : FALSE
    Life (seconds): Forever
    Entry Ageout (seconds): 3600
    Recurring (Starting Everyday): FALSE
    Status of entry (SNMP RowStatus): Active
Threshold (milliseconds): 5000
Distribution Statistics:
    Number of statistic hours kept: 2
    Number of statistic distribution buckets kept: 1
    Statistic distribution interval (milliseconds): 20
Enhanced History:
#sh ip sla statistics
Round Trip Time (RTT) for       Index 135123
Type of operation: jitter
        Latest RTT: 45 ms
Latest operation start time: 14:36:31.759 MET Wed Mar 16 2011
Latest operation return code: OK
RTT Values
        Number Of RTT: 1000
        RTT Min/Avg/Max: 21/45/60 ms
Latency one-way time milliseconds
        Number of Latency one-way Samples: 0
        Source to Destination Latency one way Min/Avg/Max: 0/0/0 ms
        Destination to Source Latency one way Min/Avg/Max: 0/0/0 ms
Jitter time milliseconds
        Number of SD Jitter Samples: 999
        Number of DS Jitter Samples: 999
        Source to Destination Jitter Min/Avg/Max: 0/3/15 ms
        Destination to Source Jitter Min/Avg/Max: 0/1/9 ms
Packet Loss Values
        Loss Source to Destination: 0           Loss Destination to Source: 0
        Out Of Sequence: 0      Tail Drop: 0
        Packet Late Arrival: 0 Packet Skipped: 0
Voice Score Values
        Calculated Planning Impairment Factor (ICPIF): 11
MOS score: 4.06
Number of successes: 18
Number of failures: 0
Operation time to live: Forever
#sh run all | include 135123
Any suggestions? Am I right?
The second problem is about the dynamic user tracking like these theads https://supportforums.cisco.com/message/3135881#3135881 or
https://supportforums.cisco.com/message/3195492#3195492
Access switches are configured properly, the configuration ran without any problems with the previous installation.
No changes done at the configuration, using the default trap listener port etc.
In the macuhic.log file I get entries like in the attached txt.
When I try to run a full Campus Manager Data Collection I get the following errormessage:
Failed to start acquisition: Construction of XML data required for UT is in progress.Please try after some time
Also any suggestions? Am I right, too?

By default IP SLA collectors installed by IPM do not appear in the running configuration. If you want to install the collectors into the running configuration, then set the "Copy IPSLA Configuration to running-config" property under IPM > Admin > Application Settings, then delete and recreate the collector.
Your Campus problem could be CSCtd49439 (a patch is available by contacting TAC). However, you should start a new thread for your Campus problem.

Changed Outlook Contact Form back to IPM.Contact - now I can't save contact in Public Folder

I recently changed the Contact form that we were using back to the default IPM.Contact. I did this so that it would be consistent for only a few of us had a custom contact template to use and it made it difficult to share contact information. After
changing the contact default back to IPM.Contact and changing all the contacts to reflect the default Message class, no can add a contact to the Public Folder contact file. I have tried several different setting for the permsion. Publishing Author, Publish
Editor, Owner, it still gives the error
The item cannot be saved to this folder. The folder was deleted, or you do not have permission. Do you want to save a copy of it in the degfualt folder for the item.
When I changed the form back to IPM.Contact i ran the omglass.exe to change it on all the contacts in the public folder.
Please advise for no contacts can now be added to our company contact list

Hi,
Please right-click this public folder, click Properties. In the General tab, make sure the field of "When posting to this folder, use" is set to IPM.Contact.
Please restart Outlook with Outlook /checkclient switch(Start > Run > type Outlook /checkclient and enter) to have a try. If it fails, please create a new Outlook profile to have a try:
http://support.microsoft.com/kb/829918/en-us
Regards,
Winnie Liang
TechNet Community Support

Error while creating application on Oracle IPM

While trying to create an application on Oracle Imaging and Process Management (IPM) the following error is encountered-
Event generated by user 'IPM_SystemServiceUser' at host 'CIS'. Cannot create application. Unable to execute service method 'ipmConfigureApplicationProfiles'. Null pointer is dereferenced. [ Details ]
An error has occurred. The stack trace below shows more information.
*!csUserEventMessage,IPM_SystemServiceUser,CIS!$!csIpmCannotCreateApp!csUnableToExecMethod,ipmConfigureApplicationProfiles!syNullPointerException*
intradoc.common.ServiceException: !csIpmCannotCreateApp!csUnableToExecMethod,ipmConfigureApplicationProfiles
**ScriptStack IPM_CREATE_APPLICATION*
*3:ipmConfigureApplicationProfiles,**no captured values***
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.Service.createServiceException(Service.java:2249)
at intradoc.server.Service.doCodeEx(Service.java:584)
at intradoc.server.Service.doCode(Service.java:505)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
at intradoc.server.Service.doAction(Service.java:477)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
at intradoc.server.Service.doActions(Service.java:472)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
at intradoc.server.Service.executeActions(Service.java:458)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.NullPointerException
at oracle.imaging.intradoc.MetaDataUtils.addOptionValue(MetaDataUtils.java:123)
at oracle.imaging.intradoc.IpmRepositoryProfileUtils.createOrUpdateApplicationProfile(IpmRepositoryProfileUtils.java:765)
at oracle.imaging.intradoc.IpmApplicationService.ipmConfigureApplicationProfiles(IpmApplicationService.java:478)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
at intradoc.server.Service.doCodeEx(Service.java:550)
... 15 more
The component IpmRepository is enabled.
The following is the configuration used while creating the application on IPM
Application Security -weblogic
Document Security - Administrators (group)
Storage policy-
Document storage - Database AAArule (custom file storage rule)
Supporting content storage - Database AAArule (custom file storage rule)
No workflow configuration defined
Have tried creating application with other security groups and filesystem storage but the error persists

Hi,
There seems to issues in the profiles which being created in UCM.
Can you check the Trigger Field which has been configured for the profiles ? If the trigger field has been configured as Type, can you change it to any of the other custom defined Information fields and then create the application.
To access the Trigger Fields navigate to the WCC web console, Administration --> Admin Applets --> Config Manager --> Profiles --> Trigger Field.
Thanks
Aditya

Error while execution of BPEL processes in IPM Solution

Hi All,
I am working on the IPM Imaging solution in which Invoice data is captured from OFR in XML format , pushed into IPM and then BPEL process is invoked to push the data into apps tables.
I am facing following error while invoking a procedure which is in apps schema from BPEL by giving it parameters.
actually this procedure/function will accept the payloads as parameters and will give some output parameters, but while processing i am getting following error :
Non Recoverable System Fault :
Exception occurred when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PreImportCleanup' failed due to: Parse struct conversion error. An error occurred while parsing XML representing a Java struct. Unable to convert the XSD element P_INVOICE_REC whose user defined
type is AXF.AXF_PREIMPORT_CUSTOM_PKG_R_IN to a Java struct.
Cause: java.sql.SQLSyntaxErrorException: ORA-04044: procedure, function, package, or type is not allowed here ".
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
Any suggestion to get over this issue will be so helpful !
Thanks & Regards,
Nupur

Hi Nupur,
We had requirement for automating invoice processing, came to know we need to use ODC/ODDC,OFR,OIPM 11g and SOA 11g with EBS.
My questions are:
1. do we need OFR for this.
2. if so how to configure OFR with OIPM
3. do we need to use imaging solution in OIPM for invoice processing and not managed attaachements
4. whts the flow is it frm EBS to OIPM or OIPM to EBS(populate invoice) or viceversa
5. can we do invoice processing automated without AXF solution.
Thanks a lot in Advance,
Ra.

How to configure IPM alert in IPM 2.6 for Windows?

I am trying to figure out if there is a way to configure IPM to send out an alert when the performace reaches or falls beyond certain threshold? In this case, I am trying to create a new HTTP operation. On the General tab > Latency Threshold Settings > Action Event Type, I select SNMP Trap & NMVT Alert. However, I did not see an option to configure where the alerts will be sent to, as well as, other alert settings. Thank you in advance.

IPM does not send out the alerts itself. Instead, the device will send an SNMP trap if the trigger condition is met. Where these traps are sent depends on your device configuration. Make sure you have defined at least one trap recipient on your IP SLA source device, and make sure that you have configured:
snmp-server enable traps rtr

Problem in mapping xml data with header details from IPM 11g to BPEL

Hi,
I want to map xml data as a supporting content from IPM application to BPEL.
My xml is
<?xml version="1.0" encoding="utf-8"?>
<DocumentFile xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://tempuri.org/Document.xsd">
<Document DocumentType="Invoice">
<DocumentImage>
<Filename>\\10.205.0.209\Img\10883212.TIF</Filename>
</DocumentImage>
</DocumentFile>
If I remove header details from root element <DocumentFile> i.e. modified xml is
<DocumentFile>
<Document DocumentType="Invoice">
<DocumentImage>
<Filename>\\10.205.0.209\Img\10883212.TIF</Filename>
</DocumentImage>
</DocumentFile>
it works fine but i need to pass header details as well.
Please suggest.
Thanks,
Priya

Hi Naveen,
In sxmb_moni the content transmitted to the adapter(RFC)is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns:ZRFID_EQUIP xmlns:ns="urn:sap-com:document:sap:rfc:functions">
- <RECORDS>
- <item>
<FLOC>f1-01-01</FLOC>
<RFID_NO>I006</RFID_NO>
</item>
- <item>
<FLOC>f1-01-02</FLOC>
<RFID_NO>I002</RFID_NO>
</item>
- <item>
<FLOC>f1-01-03</FLOC>
<RFID_NO>I003</RFID_NO>
</item>
- <item>
<FLOC>f1-01-04</FLOC>
<RFID_NO>I004</RFID_NO>
</item>
- <item>
<FLOC>f1-01-05</FLOC>
<RFID_NO>I005</RFID_NO>
</item>
- <item>
<FLOC>f1-01-06</FLOC>
<RFID_NO>I001</RFID_NO>
</item>
</RECORDS>
</ns:ZRFID_EQUIP>
At r/3 side the field floc and rfid_no gets mapped to floc which is of char30
eg floc=f1-01-01I006
rfid_no=

BPM worklist app views are not visible in IPM task viewer

Hi,
we upgraded our system from 11.1.1.3.0 to
weblogic 10.3.5.0
SOA 11.1.1.5.0 with BPEL processes
ECM with IPM and UCM 11.1.1.5.0
after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users can see tasks assigned to them there. But those views are not visible in IPM task viewer page (i tried it using driver page). Because of missing profiles/views users can't see and process tasks assigned to them. In log files isn't raised any error message.
Everything was working before upgrade. Can someone help me with this? What can i have wrong there?
Thanks a lot in advance for any help
Edited by: 914063 on Jun 20, 2012 12:56 PM
Edited by: 914063 on Jun 20, 2012 12:57 PM

Hi Renuka,
There are basically two ways to create an ADF UI for a BPM Task:
1. Generate it from the task
2. Create a ADF Taskflow based on Human Workflow Task
Since I tell this by heart, I might be slightly wrong in the terms.
You probably want to try the second option. It is accessible from the "New Gallery". You'll have to provide the Human Task from the BPM project, but then you can build up the ADF Taskflow by your self, based on the customizations of the rest of your application.
Should not be rocket science for someone with ADF11g experience. Since it is not my dayly job, I need to figure it out every time again ;). But I did it in the past and it wasn't so hard.
Regards,
Martien

Error in Oracle IPM 10gR3

Hi
I am trying to install IPM 10gR3 as per the install.doc provided by the Oracle. I completed the setup of the first server. At one point, it ask me to Run IBPMServer /diag from the command prompt to start the Oracle I/PM services configured on this Request machine.
But I am getting following error in that and server is not starting.
Error Log:
*|100|2012/04/11 17:53:47|Tool 'Filer Server' initialization suspended waiting for implementer of message(s): Get Unique Keys from Nameservice (60723), Scheduling Support (60663).|FILER_SERVER|SMD-0734|6|42421||OptikasTool.cpp|717|2088|4264|*
*|100|2012/04/11 17:53:47|Address for Action ID 60265 requested by 10.220.16.62 : 1829|REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|583|2088|4344|*
*|100|2012/04/11 17:53:47|Address for Action ID 60265 Not Found |REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|592|2088|4344|*
*|100|2012/04/11 17:53:47|Address for Action ID 60265 requested by 10.220.16.62 : 1829|REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|583|2088|1856|*
*|100|2012/04/11 17:53:47|Address for Action ID 60265 Not Found |REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|592|2088|1856|*
*|100|2012/04/11 17:53:47|Address for Action ID 60658 requested by 10.220.16.62 : 1829|REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|583|2088|4140|*
*|100|2012/04/11 17:53:47|Address for Action ID 60658 Not Found |REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|592|2088|4140|*
*|100|2012/04/11 17:53:47|Tool 'Security' initialization suspended waiting for required tool(s): 'InfoBroker'.|SECURITY|SMD-0734|6|42390||OptikasTool.cpp|704|2088|4288|*
*|100|2012/04/11 17:53:47|Tool 'Security' initialization suspended waiting for implementer of message(s): Access Control Context Message. (60589).|SECURITY|SMD-0734|6|42421||OptikasTool.cpp|717|2088|4288|*
*|100|2012/04/11 17:53:47|Address for Action ID 60265 requested by 10.220.16.62 : 1829|REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|583|2088|4148|*
*|100|2012/04/11 17:53:47|Address for Action ID 60265 Not Found |REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|592|2088|4148|*
*|100|2012/04/11 17:53:47|Address for Action ID 60265 requested by 10.220.16.62 : 1829|REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|583|2088|2632|*
*|100|2012/04/11 17:53:47|Address for Action ID 60265 Not Found |REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|592|2088|2632|*
*|100|2012/04/11 17:53:47|Address for Action ID 60072 requested by 10.220.16.62 : 1829|REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|583|2088|4180|*
*|100|2012/04/11 17:53:47|Address for Action ID 60072 Not Found |REQUEST_BROKER|SMD-0734|6|0||Resolver.cpp|592|2088|4180|*
*|100|2012/04/11 17:53:47|Tool 'UCON' initialization suspended waiting for required tool(s): 'Security', 'Storage'.|UCON|SMD-0734|6|42390||OptikasTool.cpp|704|2088|4272|*
Please somebody help me this regard
Thanks,
Chandan

All services are dependent on one-another. Seems like from below, Security, Storage and UCON have not been setup properly. Check each one carefully and retry.
- Set the system to use local security for now and it can easily be switched later.
- Turn on Verbose logging in the configuration tool - more detail will be added to the logs.
- Filer Server error is usually because the SQL user/pwd are incorrect.
Hope this helps!

Problem with the BPEL configuration in IPM

Hi,
I am using ECM 11.1.1.3.
i have created an application in IPM for invoices and done BPEL configuration.
Here IPM input agent pick the text file exported by the OFR.( contains xml(supporting content) and tiff file).
some of the BPEL fiels are mapped with the IPM application and some of the fields are mapped with supporting
content(i.e line items)
but here when we test it only one line item will be taken in Bpel payload even if there are 4 line items supporting content.
can anybody plz help?.....

Hi,
I fear that is a bug in the report which is currently being investigated. For now, can you simply create the logical ports and RFC destination manually.
For this follow the steps outlined in the deployment guide
-> 3.2.4 Retrieve URL for Logical Port
-> 3.2.5 Create a Logical Port
in Chapter 3.2.5. execute these steps on the SCL and not (like mentioned in the documentation) on the SAP system. After doing that the missing steps of report /IWCNT/DEMO_REP_LP_CONFIG should be executed.
(you might also have to create an HTTP RFC destination that points to the SCL itself)
I will let you know as soon as we have a fix for /IWCNT/DEMO_REP_LP_CONFIG itself.
Regards,
Holger.

Ipsla ipm

Similar Messages

Maybe you are looking for