Iptable-filter problem
I am having trouble using iptables on my computer.
When I try to start the iptables service, it fails with the error
iptables-restore v1.4.19.1: iptables-restore: unable to initialize table 'filter'
So it seems that iptable_filter isn't being loaded and modprobe returns this message:
modprobe iptable_filter
modprobe: ERROR could not insert 'iptable_filter': Unknown symbol in module, or unknown parameter (see dmesg)
So it seems like a kernel problem? I have restarted multiple times since the last Linux update.
cat /proc/cmdline
BOOT_IMAGE=../vmlinuz-linux root=/dev/sda2 rw ipv6.disable=1 initrd=../initramfs-linux.img
-- Logs begin at Mon 2013-08-26 01:39:04 UTC, end at Sun 2013-11-03 06:38:10 UTC. --
Nov 01 09:48:57 danserver systemd-journal[133]: Runtime journal is using 1.3M (max 386.8M, leaving 580.3M of free 3.7G, current limit 386.8M).
Nov 01 09:48:57 danserver systemd-journal[133]: Runtime journal is using 1.3M (max 386.8M, leaving 580.3M of free 3.7G, current limit 386.8M).
Nov 01 09:48:57 danserver kernel: Initializing cgroup subsys cpuset
Nov 01 09:48:57 danserver kernel: Initializing cgroup subsys cpu
Nov 01 09:48:57 danserver kernel: Initializing cgroup subsys cpuacct
Nov 01 09:48:57 danserver kernel: Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
Nov 01 09:48:57 danserver kernel: Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda2 rw ipv6.disable=1 initrd=../initramfs-linux.img
Nov 01 09:48:57 danserver kernel: e820: BIOS-provided physical RAM map:
Nov 01 09:48:57 danserver kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
Nov 01 09:48:57 danserver kernel: BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
Nov 01 09:48:57 danserver kernel: BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
Nov 01 09:48:57 danserver kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
Nov 01 09:48:57 danserver kernel: BIOS-e820: [mem 0x00000000cff90000-0x00000000cffa7fff] ACPI data
Nov 01 09:48:57 danserver kernel: BIOS-e820: [mem 0x00000000cffa8000-0x00000000cffcffff] ACPI NVS
Nov 01 09:48:57 danserver kernel: BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
Nov 01 09:48:57 danserver kernel: BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
Nov 01 09:48:57 danserver kernel: BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
Nov 01 09:48:57 danserver kernel: NX (Execute Disable) protection: active
Nov 01 09:48:57 danserver kernel: SMBIOS 2.5 present.
Nov 01 09:48:57 danserver kernel: DMI: System manufacturer System Product Name/M4A88T-V EVO, BIOS 0405 12/15/2010
Nov 01 09:48:57 danserver kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Nov 01 09:48:57 danserver kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Nov 01 09:48:57 danserver kernel: No AGP bridge found
Nov 01 09:48:57 danserver kernel: e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
Nov 01 09:48:57 danserver kernel: MTRR default type: uncachable
Nov 01 09:48:57 danserver kernel: MTRR fixed ranges enabled:
Nov 01 09:48:57 danserver kernel: 00000-9FFFF write-back
Nov 01 09:48:57 danserver kernel: A0000-EFFFF uncachable
Nov 01 09:48:57 danserver kernel: F0000-FFFFF write-protect
Nov 01 09:48:57 danserver kernel: MTRR variable ranges enabled:
Nov 01 09:48:57 danserver kernel: 0 base 000000000000 mask FFFF80000000 write-back
Nov 01 09:48:57 danserver kernel: 1 base 000080000000 mask FFFFC0000000 write-back
Nov 01 09:48:57 danserver kernel: 2 base 0000C0000000 mask FFFFF0000000 write-back
Nov 01 09:48:57 danserver kernel: 3 disabled
Nov 01 09:48:57 danserver kernel: 4 disabled
Nov 01 09:48:57 danserver kernel: 5 disabled
Nov 01 09:48:57 danserver kernel: 6 disabled
Nov 01 09:48:57 danserver kernel: 7 disabled
Nov 01 09:48:57 danserver kernel: TOM2: 0000000230000000 aka 8960M
Nov 01 09:48:57 danserver kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 01 09:48:57 danserver kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
Nov 01 09:48:57 danserver kernel: e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
Nov 01 09:48:57 danserver kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Nov 01 09:48:57 danserver kernel: Scanning 1 areas for low memory corruption
Nov 01 09:48:57 danserver kernel: Base memory trampoline at [ffff880000098000] 98000 size 24576
Nov 01 09:48:57 danserver kernel: Using GB pages for direct mapping
Nov 01 09:48:57 danserver kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Nov 01 09:48:57 danserver kernel: [mem 0x00000000-0x000fffff] page 4k
Nov 01 09:48:57 danserver kernel: BRK [0x01b2f000, 0x01b2ffff] PGTABLE
Nov 01 09:48:57 danserver kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
Nov 01 09:48:57 danserver kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
Nov 01 09:48:57 danserver kernel: init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
Nov 01 09:48:57 danserver kernel: [mem 0x21fe00000-0x21fffffff] page 2M
Nov 01 09:48:57 danserver kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
Nov 01 09:48:57 danserver kernel: init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
Nov 01 09:48:57 danserver kernel: [mem 0x21c000000-0x21fdfffff] page 2M
Nov 01 09:48:57 danserver kernel: init_memory_mapping: [mem 0x200000000-0x21bffffff]
Nov 01 09:48:57 danserver kernel: [mem 0x200000000-0x21bffffff] page 2M
Nov 01 09:48:57 danserver kernel: init_memory_mapping: [mem 0x00100000-0xcff8ffff]
Nov 01 09:48:57 danserver kernel: [mem 0x00100000-0x001fffff] page 4k
Nov 01 09:48:57 danserver kernel: [mem 0x00200000-0x3fffffff] page 2M
Nov 01 09:48:57 danserver kernel: [mem 0x40000000-0xbfffffff] page 1G
Nov 01 09:48:57 danserver kernel: [mem 0xc0000000-0xcfdfffff] page 2M
Nov 01 09:48:57 danserver kernel: [mem 0xcfe00000-0xcff8ffff] page 4k
Nov 01 09:48:57 danserver kernel: init_memory_mapping: [mem 0x100000000-0x1ffffffff]
Nov 01 09:48:57 danserver kernel: [mem 0x100000000-0x1ffffffff] page 1G
Nov 01 09:48:57 danserver kernel: RAMDISK: [mem 0x7fd09000-0x7fffffff]
Nov 01 09:48:57 danserver kernel: ACPI: RSDP 00000000000fbb80 00024 (v02 ACPIAM)
Nov 01 09:48:57 danserver kernel: ACPI: XSDT 00000000cff90100 0005C (v01 121510 XSDT1028 20101215 MSFT 00000097)
Nov 01 09:48:57 danserver kernel: ACPI: FACP 00000000cff90290 000F4 (v03 121510 FACP1028 20101215 MSFT 00000097)
Nov 01 09:48:57 danserver kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
Nov 01 09:48:57 danserver kernel: ACPI: DSDT 00000000cff90450 0ECD4 (v01 A1684 A1684001 00000001 INTL 20060113)
Nov 01 09:48:57 danserver kernel: ACPI: FACS 00000000cffa8000 00040
Nov 01 09:48:57 danserver kernel: ACPI: APIC 00000000cff90390 0007C (v01 121510 APIC1028 20101215 MSFT 00000097)
Nov 01 09:48:57 danserver kernel: ACPI: MCFG 00000000cff90410 0003C (v01 121510 OEMMCFG 20101215 MSFT 00000097)
Nov 01 09:48:57 danserver kernel: ACPI: OEMB 00000000cffa8040 00072 (v01 121510 OEMB1028 20101215 MSFT 00000097)
Nov 01 09:48:57 danserver kernel: ACPI: SRAT 00000000cff9f8a0 000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
Nov 01 09:48:57 danserver kernel: ACPI: HPET 00000000cff9f990 00038 (v01 121510 OEMHPET 20101215 MSFT 00000097)
Nov 01 09:48:57 danserver kernel: ACPI: SSDT 00000000cff9f9d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
Nov 01 09:48:57 danserver kernel: ACPI: Local APIC address 0xfee00000
Nov 01 09:48:57 danserver kernel: SRAT: PXM 0 -> APIC 0x00 -> Node 0
Nov 01 09:48:57 danserver kernel: SRAT: PXM 0 -> APIC 0x01 -> Node 0
Nov 01 09:48:57 danserver kernel: SRAT: PXM 0 -> APIC 0x02 -> Node 0
Nov 01 09:48:57 danserver kernel: SRAT: PXM 0 -> APIC 0x03 -> Node 0
Nov 01 09:48:57 danserver kernel: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
Nov 01 09:48:57 danserver kernel: SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
Nov 01 09:48:57 danserver kernel: SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff]
Nov 01 09:48:57 danserver kernel: NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
Nov 01 09:48:57 danserver kernel: NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x21fffffff] -> [mem 0x00000000-0x21fffffff]
Nov 01 09:48:57 danserver kernel: Initmem setup node 0 [mem 0x00000000-0x21fffffff]
Nov 01 09:48:57 danserver kernel: NODE_DATA [mem 0x21fff9000-0x21fffdfff]
Nov 01 09:48:57 danserver kernel: [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217a00000-ffff88021f5fffff] on node 0
Nov 01 09:48:57 danserver kernel: Zone ranges:
Nov 01 09:48:57 danserver kernel: DMA [mem 0x00001000-0x00ffffff]
Nov 01 09:48:57 danserver kernel: DMA32 [mem 0x01000000-0xffffffff]
Nov 01 09:48:57 danserver kernel: Normal [mem 0x100000000-0x21fffffff]
Nov 01 09:48:57 danserver kernel: Movable zone start for each node
Nov 01 09:48:57 danserver kernel: Early memory node ranges
Nov 01 09:48:57 danserver kernel: node 0: [mem 0x00001000-0x0009dfff]
Nov 01 09:48:57 danserver kernel: node 0: [mem 0x00100000-0xcff8ffff]
Nov 01 09:48:57 danserver kernel: node 0: [mem 0x100000000-0x21fffffff]
Nov 01 09:48:57 danserver kernel: On node 0 totalpages: 2031405
Nov 01 09:48:57 danserver kernel: DMA zone: 64 pages used for memmap
Nov 01 09:48:57 danserver kernel: DMA zone: 21 pages reserved
Nov 01 09:48:57 danserver kernel: DMA zone: 3997 pages, LIFO batch:0
Nov 01 09:48:57 danserver kernel: DMA32 zone: 13247 pages used for memmap
Nov 01 09:48:57 danserver kernel: DMA32 zone: 847760 pages, LIFO batch:31
Nov 01 09:48:57 danserver kernel: Normal zone: 18432 pages used for memmap
Nov 01 09:48:57 danserver kernel: Normal zone: 1179648 pages, LIFO batch:31
Nov 01 09:48:57 danserver kernel: ACPI: PM-Timer IO Port: 0x808
Nov 01 09:48:57 danserver kernel: ACPI: Local APIC address 0xfee00000
Nov 01 09:48:57 danserver kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 01 09:48:57 danserver kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 01 09:48:57 danserver kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Nov 01 09:48:57 danserver kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Nov 01 09:48:57 danserver kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
Nov 01 09:48:57 danserver kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
Nov 01 09:48:57 danserver kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Nov 01 09:48:57 danserver kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
Nov 01 09:48:57 danserver kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 01 09:48:57 danserver kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Nov 01 09:48:57 danserver kernel: ACPI: IRQ0 used by override.
Nov 01 09:48:57 danserver kernel: ACPI: IRQ2 used by override.
Nov 01 09:48:57 danserver kernel: ACPI: IRQ9 used by override.
Nov 01 09:48:57 danserver kernel: Using ACPI (MADT) for SMP configuration information
Nov 01 09:48:57 danserver kernel: ACPI: HPET id: 0x8300 base: 0xfed00000
Nov 01 09:48:57 danserver kernel: smpboot: Allowing 6 CPUs, 2 hotplug CPUs
Nov 01 09:48:57 danserver kernel: nr_irqs_gsi: 40
Nov 01 09:48:57 danserver kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
Nov 01 09:48:57 danserver kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Nov 01 09:48:57 danserver kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
Nov 01 09:48:57 danserver kernel: PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
Nov 01 09:48:57 danserver kernel: PM: Registered nosave memory: [mem 0xcff90000-0xcffa7fff]
Nov 01 09:48:57 danserver kernel: PM: Registered nosave memory: [mem 0xcffa8000-0xcffcffff]
Nov 01 09:48:57 danserver kernel: PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
Nov 01 09:48:57 danserver kernel: PM: Registered nosave memory: [mem 0xd0000000-0xff9fffff]
Nov 01 09:48:57 danserver kernel: PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
Nov 01 09:48:57 danserver kernel: e820: [mem 0xd0000000-0xff9fffff] available for PCI devices
Nov 01 09:48:57 danserver kernel: Booting paravirtualized kernel on bare hardware
Nov 01 09:48:57 danserver kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:6 nr_node_ids:1
Nov 01 09:48:57 danserver kernel: PERCPU: Embedded 29 pages/cpu @ffff88021fc00000 s86528 r8192 d24064 u262144
Nov 01 09:48:57 danserver kernel: pcpu-alloc: s86528 r8192 d24064 u262144 alloc=1*2097152
Nov 01 09:48:57 danserver kernel: pcpu-alloc: [0] 0 1 2 3 4 5 - -
Nov 01 09:48:57 danserver kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999641
Nov 01 09:48:57 danserver kernel: Policy zone: Normal
Nov 01 09:48:57 danserver kernel: Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda2 rw ipv6.disable=1 initrd=../initramfs-linux.img
Nov 01 09:48:57 danserver kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Nov 01 09:48:57 danserver kernel: Checking aperture...
Nov 01 09:48:57 danserver kernel: No AGP bridge found
Nov 01 09:48:57 danserver kernel: Node 0: aperture @ c4000000 size 32 MB
Nov 01 09:48:57 danserver kernel: Aperture pointing to e820 RAM. Ignoring.
Nov 01 09:48:57 danserver kernel: Your BIOS doesn't leave a aperture memory hole
Nov 01 09:48:57 danserver kernel: Please enable the IOMMU option in the BIOS setup
Nov 01 09:48:57 danserver kernel: This costs you 64 MB of RAM
Nov 01 09:48:57 danserver kernel: Mapping aperture over 65536 KB of RAM @ c4000000
Nov 01 09:48:57 danserver kernel: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Nov 01 09:48:57 danserver kernel: Memory: 7851488K/8125620K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 274132K reserved)
Nov 01 09:48:57 danserver kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Nov 01 09:48:57 danserver kernel: Preemptible hierarchical RCU implementation.
Nov 01 09:48:57 danserver kernel: RCU dyntick-idle grace-period acceleration is enabled.
Nov 01 09:48:57 danserver kernel: Dump stacks of tasks blocking RCU-preempt GP.
Nov 01 09:48:57 danserver kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=6.
Nov 01 09:48:57 danserver kernel: NR_IRQS:8448 nr_irqs:728 16
Nov 01 09:48:57 danserver kernel: Console: colour VGA+ 80x25
Nov 01 09:48:57 danserver kernel: console [tty0] enabled
Nov 01 09:48:57 danserver kernel: allocated 32505856 bytes of page_cgroup
Nov 01 09:48:57 danserver kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 01 09:48:57 danserver kernel: hpet clockevent registered
Nov 01 09:48:57 danserver kernel: tsc: Fast TSC calibration using PIT
Nov 01 09:48:57 danserver kernel: tsc: Detected 3013.705 MHz processor
Nov 01 09:48:57 danserver kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6029.55 BogoMIPS (lpj=10045683)
Nov 01 09:48:57 danserver kernel: pid_max: default: 32768 minimum: 301
Nov 01 09:48:57 danserver kernel: Security Framework initialized
Nov 01 09:48:57 danserver kernel: AppArmor: AppArmor disabled by boot time parameter
Nov 01 09:48:57 danserver kernel: Yama: becoming mindful.
Nov 01 09:48:57 danserver kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Nov 01 09:48:57 danserver kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 01 09:48:57 danserver kernel: Mount-cache hash table entries: 256
Nov 01 09:48:57 danserver kernel: Initializing cgroup subsys memory
Nov 01 09:48:57 danserver kernel: Initializing cgroup subsys devices
Nov 01 09:48:57 danserver kernel: Initializing cgroup subsys freezer
Nov 01 09:48:57 danserver kernel: Initializing cgroup subsys net_cls
Nov 01 09:48:57 danserver kernel: Initializing cgroup subsys blkio
Nov 01 09:48:57 danserver kernel: tseg: 0000000000
Nov 01 09:48:57 danserver kernel: CPU: Physical Processor ID: 0
Nov 01 09:48:57 danserver kernel: CPU: Processor Core ID: 0
Nov 01 09:48:57 danserver kernel: mce: CPU supports 6 MCE banks
Nov 01 09:48:57 danserver kernel: LVT offset 0 assigned for vector 0xf9
Nov 01 09:48:57 danserver kernel: process: using AMD E400 aware idle routine
Nov 01 09:48:57 danserver kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Nov 01 09:48:57 danserver kernel: Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
Nov 01 09:48:57 danserver kernel: ACPI: Core revision 20130517
Nov 01 09:48:57 danserver kernel: ACPI: All ACPI Tables successfully acquired
Nov 01 09:48:57 danserver kernel: ftrace: allocating 20100 entries in 79 pages
Nov 01 09:48:57 danserver kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 01 09:48:57 danserver kernel: smpboot: CPU0: AMD Athlon(tm) II X4 640 Processor (fam: 10, model: 05, stepping: 03)
Nov 01 09:48:57 danserver kernel: Performance Events: AMD PMU driver.
Nov 01 09:48:57 danserver kernel: ... version: 0
Nov 01 09:48:57 danserver kernel: ... bit width: 48
Nov 01 09:48:57 danserver kernel: ... generic registers: 4
Nov 01 09:48:57 danserver kernel: ... value mask: 0000ffffffffffff
Nov 01 09:48:57 danserver kernel: ... max period: 00007fffffffffff
Nov 01 09:48:57 danserver kernel: ... fixed-purpose events: 0
Nov 01 09:48:57 danserver kernel: ... event mask: 000000000000000f
Nov 01 09:48:57 danserver kernel: process: System has AMD C1E enabled
Nov 01 09:48:57 danserver kernel: process: Switch to broadcast mode on CPU0
Nov 01 09:48:57 danserver kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Nov 01 09:48:57 danserver kernel: process: Switch to broadcast mode on CPU1
Nov 01 09:48:57 danserver kernel: process: Switch to broadcast mode on CPU2
Nov 01 09:48:57 danserver kernel: smpboot: Booting Node 0, Processors #1 #2 #3
Nov 01 09:48:57 danserver kernel: Brought up 4 CPUs
Nov 01 09:48:57 danserver kernel: smpboot: Total of 4 processors activated (24119.20 BogoMIPS)
Nov 01 09:48:57 danserver kernel: process: Switch to broadcast mode on CPU3
Nov 01 09:48:57 danserver kernel: devtmpfs: initialized
Nov 01 09:48:57 danserver kernel: PM: Registering ACPI NVS region [mem 0xcffa8000-0xcffcffff] (163840 bytes)
Nov 01 09:48:57 danserver kernel: RTC time: 9:48:53, date: 11/01/13
Nov 01 09:48:57 danserver kernel: NET: Registered protocol family 16
Nov 01 09:48:57 danserver kernel: node 0 link 0: io port [1000, ffffff]
Nov 01 09:48:57 danserver kernel: TOM: 00000000d0000000 aka 3328M
Nov 01 09:48:57 danserver kernel: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
Nov 01 09:48:57 danserver kernel: node 0 link 0: mmio [a0000, bffff]
Nov 01 09:48:57 danserver kernel: node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
Nov 01 09:48:57 danserver kernel: node 0 link 0: mmio [f0000000, fe8fffff]
Nov 01 09:48:57 danserver kernel: node 0 link 0: mmio [fe900000, feafffff]
Nov 01 09:48:57 danserver kernel: node 0 link 0: mmio [feb00000, ffdfffff]
Nov 01 09:48:57 danserver kernel: TOM2: 0000000230000000 aka 8960M
Nov 01 09:48:57 danserver kernel: bus: [bus 00-07] on node 0 link 0
Nov 01 09:48:57 danserver kernel: bus: 00 [io 0x0000-0xffff]
Nov 01 09:48:57 danserver kernel: bus: 00 [mem 0x000a0000-0x000bffff]
Nov 01 09:48:57 danserver kernel: bus: 00 [mem 0xd0000000-0xdfffffff]
Nov 01 09:48:57 danserver kernel: bus: 00 [mem 0xf0000000-0xffffffff]
Nov 01 09:48:57 danserver kernel: bus: 00 [mem 0x230000000-0xfcffffffff]
Nov 01 09:48:57 danserver kernel: ACPI: bus type PCI registered
Nov 01 09:48:57 danserver kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Nov 01 09:48:57 danserver kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Nov 01 09:48:57 danserver kernel: PCI: not using MMCONFIG
Nov 01 09:48:57 danserver kernel: PCI: Using configuration type 1 for base access
Nov 01 09:48:57 danserver kernel: PCI: Using configuration type 1 for extended access
Nov 01 09:48:57 danserver kernel: bio: create slab <bio-0> at 0
Nov 01 09:48:57 danserver kernel: ACPI: Added _OSI(Module Device)
Nov 01 09:48:57 danserver kernel: ACPI: Added _OSI(Processor Device)
Nov 01 09:48:57 danserver kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Nov 01 09:48:57 danserver kernel: ACPI: Added _OSI(Processor Aggregator Device)
Nov 01 09:48:57 danserver kernel: ACPI: EC: Look up EC in DSDT
Nov 01 09:48:57 danserver kernel: ACPI: Executed 3 blocks of module-level executable AML code
Nov 01 09:48:57 danserver kernel: ACPI: Interpreter enabled
Nov 01 09:48:57 danserver kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
Nov 01 09:48:57 danserver kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov 01 09:48:57 danserver kernel: ACPI: Using IOAPIC for interrupt routing
Nov 01 09:48:57 danserver kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Nov 01 09:48:57 danserver kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Nov 01 09:48:57 danserver kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Nov 01 09:48:57 danserver kernel: ACPI: No dock devices found.
Nov 01 09:48:57 danserver kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Nov 01 09:48:57 danserver kernel: acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
Nov 01 09:48:57 danserver kernel: acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
Nov 01 09:48:57 danserver kernel: PCI host bridge to bus 0000:00
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
Nov 01 09:48:57 danserver kernel: pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
Nov 01 09:48:57 danserver kernel: pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
Nov 01 09:48:57 danserver kernel: pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
Nov 01 09:48:57 danserver kernel: pci 0000:00:09.0: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
Nov 01 09:48:57 danserver kernel: pci 0000:00:11.0: reg 0x10: [io 0xb000-0xb007]
Nov 01 09:48:57 danserver kernel: pci 0000:00:11.0: reg 0x14: [io 0xa000-0xa003]
Nov 01 09:48:57 danserver kernel: pci 0000:00:11.0: reg 0x18: [io 0x9000-0x9007]
Nov 01 09:48:57 danserver kernel: pci 0000:00:11.0: reg 0x1c: [io 0x8000-0x8003]
Nov 01 09:48:57 danserver kernel: pci 0000:00:11.0: reg 0x20: [io 0x7000-0x700f]
Nov 01 09:48:57 danserver kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe8ffc00-0xfe8fffff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:11.0: set SATA to AHCI mode
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe8fe000-0xfe8fefff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.1: reg 0x10: [mem 0xfe8fd000-0xfe8fdfff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.1: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe8ff800-0xfe8ff8ff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.2: supports D1 D2
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Nov 01 09:48:57 danserver kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe8fc000-0xfe8fcfff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.1: reg 0x10: [mem 0xfe8fb000-0xfe8fbfff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.1: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.2: reg 0x10: [mem 0xfe8ff400-0xfe8ff4ff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.2: supports D1 D2
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
Nov 01 09:48:57 danserver kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.2: reg 0x10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.2: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.5: reg 0x10: [mem 0xfe8fa000-0xfe8fafff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.5: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
Nov 01 09:48:57 danserver kernel: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
Nov 01 09:48:57 danserver kernel: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
Nov 01 09:48:57 danserver kernel: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
Nov 01 09:48:57 danserver kernel: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
Nov 01 09:48:57 danserver kernel: pci 0000:01:05.0: [1002:9715] type 00 class 0x030000
Nov 01 09:48:57 danserver kernel: pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
Nov 01 09:48:57 danserver kernel: pci 0000:01:05.0: reg 0x14: [io 0xc000-0xc0ff]
Nov 01 09:48:57 danserver kernel: pci 0000:01:05.0: reg 0x18: [mem 0xfeae0000-0xfeaeffff]
Nov 01 09:48:57 danserver kernel: pci 0000:01:05.0: reg 0x24: [mem 0xfe900000-0xfe9fffff]
Nov 01 09:48:57 danserver kernel: pci 0000:01:05.0: supports D1 D2
Nov 01 09:48:57 danserver kernel: pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
Nov 01 09:48:57 danserver kernel: pci 0000:01:05.1: reg 0x10: [mem 0xfeaf4000-0xfeaf7fff]
Nov 01 09:48:57 danserver kernel: pci 0000:01:05.1: supports D1 D2
Nov 01 09:48:57 danserver kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Nov 01 09:48:57 danserver kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 01 09:48:57 danserver kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
Nov 01 09:48:57 danserver kernel: pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff]
Nov 01 09:48:57 danserver kernel: pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
Nov 01 09:48:57 danserver kernel: pci 0000:02:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
Nov 01 09:48:57 danserver kernel: pci 0000:02:00.0: supports D1 D2
Nov 01 09:48:57 danserver kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 01 09:48:57 danserver kernel: pci 0000:02:00.0: System wakeup disabled by ACPI
Nov 01 09:48:57 danserver kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
Nov 01 09:48:57 danserver kernel: pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
Nov 01 09:48:57 danserver kernel: pci 0000:03:05.0: [8086:107c] type 00 class 0x020000
Nov 01 09:48:57 danserver kernel: pci 0000:03:05.0: reg 0x10: [mem 0xfebe0000-0xfebfffff]
Nov 01 09:48:57 danserver kernel: pci 0000:03:05.0: reg 0x14: [mem 0xfebc0000-0xfebdffff]
Nov 01 09:48:57 danserver kernel: pci 0000:03:05.0: reg 0x18: [io 0xec00-0xec3f]
Nov 01 09:48:57 danserver kernel: pci 0000:03:05.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
Nov 01 09:48:57 danserver kernel: pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
Nov 01 09:48:57 danserver kernel: pci 0000:03:08.0: [1106:3044] type 00 class 0x0c0010
Nov 01 09:48:57 danserver kernel: pci 0000:03:08.0: reg 0x10: [mem 0xfeb9f800-0xfeb9ffff]
Nov 01 09:48:57 danserver kernel: pci 0000:03:08.0: reg 0x14: [io 0xe880-0xe8ff]
Nov 01 09:48:57 danserver kernel: pci 0000:03:08.0: supports D2
Nov 01 09:48:57 danserver kernel: pci 0000:03:08.0: PME# supported from D2 D3hot D3cold
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
Nov 01 09:48:57 danserver kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
Nov 01 09:48:57 danserver kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
Nov 01 09:48:57 danserver kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
Nov 01 09:48:57 danserver kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
Nov 01 09:48:57 danserver kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
Nov 01 09:48:57 danserver kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
Nov 01 09:48:57 danserver kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *7 10 11 12 14 15)
Nov 01 09:48:57 danserver kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
Nov 01 09:48:57 danserver kernel: ACPI: Enabled 1 GPEs in block 00 to 1F
Nov 01 09:48:57 danserver kernel: ACPI: \_SB_.PCI0: notify handler is installed
Nov 01 09:48:57 danserver kernel: Found 1 acpi root devices
Nov 01 09:48:57 danserver kernel: ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
Nov 01 09:48:57 danserver kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
Nov 01 09:48:57 danserver kernel: vgaarb: loaded
Nov 01 09:48:57 danserver kernel: vgaarb: bridge control possible 0000:01:05.0
Nov 01 09:48:57 danserver kernel: PCI: Using ACPI for IRQ routing
Nov 01 09:48:57 danserver kernel: PCI: pci_cache_line_size set to 64 bytes
Nov 01 09:48:57 danserver kernel: e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
Nov 01 09:48:57 danserver kernel: e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
Nov 01 09:48:57 danserver kernel: NetLabel: Initializing
Nov 01 09:48:57 danserver kernel: NetLabel: domain hash size = 128
Nov 01 09:48:57 danserver kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 01 09:48:57 danserver kernel: NetLabel: unlabeled traffic allowed by default
Nov 01 09:48:57 danserver kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Nov 01 09:48:57 danserver kernel: hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Nov 01 09:48:57 danserver kernel: Switched to clocksource hpet
Nov 01 09:48:57 danserver kernel: pnp: PnP ACPI init
Nov 01 09:48:57 danserver kernel: ACPI: bus type PNP registered
Nov 01 09:48:57 danserver kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 01 09:48:57 danserver kernel: pnp 00:01: [dma 4]
Nov 01 09:48:57 danserver kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Nov 01 09:48:57 danserver kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Nov 01 09:48:57 danserver kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
Nov 01 09:48:57 danserver kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
Nov 01 09:48:57 danserver kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
Nov 01 09:48:57 danserver kernel: pnp 00:06: [dma 0 disabled]
Nov 01 09:48:57 danserver kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
Nov 01 09:48:57 danserver kernel: system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
Nov 01 09:48:57 danserver kernel: system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x04d0-0x04d1] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x040b] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x04d6] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0c00-0x0c01] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0c14] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0c50-0x0c51] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0c52] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0c6c] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0c6f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0cd0-0x0cd1] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0cd2-0x0cd3] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0cd4-0x0cd5] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0cd6-0x0cd7] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0cd8-0x0cdf] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0b00-0x0b3f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0800-0x089f] could not be reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0b00-0x0b0f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0b20-0x0b3f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0900-0x090f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0x0910-0x091f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [io 0xfe00-0xfefe] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 01 09:48:57 danserver kernel: system 00:09: [io 0x0230-0x023f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:09: [io 0x0290-0x029f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:09: [io 0x0300-0x030f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:09: [io 0x0a30-0x0a3f] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 01 09:48:57 danserver kernel: system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
Nov 01 09:48:57 danserver kernel: system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 01 09:48:57 danserver kernel: system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
Nov 01 09:48:57 danserver kernel: system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
Nov 01 09:48:57 danserver kernel: system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
Nov 01 09:48:57 danserver kernel: system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
Nov 01 09:48:57 danserver kernel: system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
Nov 01 09:48:57 danserver kernel: system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
Nov 01 09:48:57 danserver kernel: pnp: PnP ACPI: found 12 devices
Nov 01 09:48:57 danserver kernel: ACPI: bus type PNP unregistered
Nov 01 09:48:57 danserver kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Nov 01 09:48:57 danserver kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 01 09:48:57 danserver kernel: pci 0000:00:09.0: PCI bridge to [bus 02]
Nov 01 09:48:57 danserver kernel: pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: PCI bridge to [bus 03]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
Nov 01 09:48:57 danserver kernel: pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
Nov 01 09:48:57 danserver kernel: pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
Nov 01 09:48:57 danserver kernel: NET: Registered protocol family 2
Nov 01 09:48:57 danserver kernel: TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
Nov 01 09:48:57 danserver kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Nov 01 09:48:57 danserver kernel: TCP: Hash tables configured (established 65536 bind 65536)
Nov 01 09:48:57 danserver kernel: TCP: reno registered
Nov 01 09:48:57 danserver kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes)
Nov 01 09:48:57 danserver kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Nov 01 09:48:57 danserver kernel: NET: Registered protocol family 1
Nov 01 09:48:57 danserver kernel: pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
Nov 01 09:48:57 danserver kernel: pci 0000:01:05.0: Boot video device
Nov 01 09:48:57 danserver kernel: PCI: CLS 64 bytes, default 64
Nov 01 09:48:57 danserver kernel: Unpacking initramfs...
Nov 01 09:48:57 danserver kernel: Freeing initrd memory: 3036K (ffff88007fd09000 - ffff880080000000)
Nov 01 09:48:57 danserver kernel: PCI-DMA: Disabling AGP.
Nov 01 09:48:57 danserver kernel: PCI-DMA: aperture base @ c4000000 size 65536 KB
Nov 01 09:48:57 danserver kernel: PCI-DMA: using GART IOMMU.
Nov 01 09:48:57 danserver kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Nov 01 09:48:57 danserver kernel: LVT offset 1 assigned for vector 0x400
Nov 01 09:48:57 danserver kernel: IBS: LVT offset 1 assigned
Nov 01 09:48:57 danserver kernel: perf: AMD IBS detected (0x0000001f)
Nov 01 09:48:57 danserver kernel: Scanning for low memory corruption every 60 seconds
Nov 01 09:48:57 danserver kernel: audit: initializing netlink socket (disabled)
Nov 01 09:48:57 danserver kernel: type=2000 audit(1383299333.613:1): initialized
Nov 01 09:48:57 danserver kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Nov 01 09:48:57 danserver kernel: zbud: loaded
Nov 01 09:48:57 danserver kernel: VFS: Disk quotas dquot_6.5.2
Nov 01 09:48:57 danserver kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 01 09:48:57 danserver kernel: msgmni has been set to 15469
Nov 01 09:48:57 danserver kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Nov 01 09:48:57 danserver kernel: io scheduler noop registered
Nov 01 09:48:57 danserver kernel: io scheduler deadline registered
Nov 01 09:48:57 danserver kernel: io scheduler cfq registered (default)
Nov 01 09:48:57 danserver kernel: pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
Nov 01 09:48:57 danserver kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 01 09:48:57 danserver kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 01 09:48:57 danserver kernel: GHES: HEST is not enabled!
Nov 01 09:48:57 danserver kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Nov 01 09:48:57 danserver kernel: 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 01 09:48:57 danserver kernel: Linux agpgart interface v0.103
Nov 01 09:48:57 danserver kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
Nov 01 09:48:57 danserver kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 01 09:48:57 danserver kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 01 09:48:57 danserver kernel: mousedev: PS/2 mouse device common for all mice
Nov 01 09:48:57 danserver kernel: rtc_cmos 00:02: RTC can wake from S4
Nov 01 09:48:57 danserver kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Nov 01 09:48:57 danserver kernel: rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Nov 01 09:48:57 danserver kernel: cpuidle: using governor ladder
Nov 01 09:48:57 danserver kernel: cpuidle: using governor menu
Nov 01 09:48:57 danserver kernel: drop_monitor: Initializing network drop monitor service
Nov 01 09:48:57 danserver kernel: TCP: cubic registered
Nov 01 09:48:57 danserver kernel: IPv6: Loaded, but administratively disabled, reboot required to enable
Nov 01 09:48:57 danserver kernel: NET: Registered protocol family 17
Nov 01 09:48:57 danserver kernel: Key type dns_resolver registered
Nov 01 09:48:57 danserver kernel: PM: Hibernation image not present or could not be loaded.
Nov 01 09:48:57 danserver kernel: registered taskstats version 1
Nov 01 09:48:57 danserver kernel: Magic number: 5:844:827
Nov 01 09:48:57 danserver kernel: rtc_cmos 00:02: setting system clock to 2013-11-01 09:48:54 UTC (1383299334)
Nov 01 09:48:57 danserver kernel: Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
Nov 01 09:48:57 danserver kernel: Write protecting the kernel read-only data: 8192k
Nov 01 09:48:57 danserver kernel: Freeing unused kernel memory: 1084K (ffff8800014f1000 - ffff880001600000)
Nov 01 09:48:57 danserver kernel: Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
Nov 01 09:48:57 danserver systemd-udevd[57]: starting version 208
Nov 01 09:48:57 danserver kernel: SCSI subsystem initialized
Nov 01 09:48:57 danserver kernel: ACPI: bus type USB registered
Nov 01 09:48:57 danserver kernel: usbcore: registered new interface driver usbfs
Nov 01 09:48:57 danserver kernel: usbcore: registered new interface driver hub
Nov 01 09:48:57 danserver kernel: usbcore: registered new device driver usb
Nov 01 09:48:57 danserver kernel: ACPI: bus type ATA registered
Nov 01 09:48:57 danserver kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 01 09:48:57 danserver kernel: libata version 3.00 loaded.
Nov 01 09:48:57 danserver kernel: ehci-pci: EHCI PCI platform driver
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:12.2: EHCI Host Controller
Nov 01 09:48:57 danserver kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:12.2: debug port 1
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800
Nov 01 09:48:57 danserver kernel: ohci-pci: OHCI PCI platform driver
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
Nov 01 09:48:57 danserver kernel: hub 1-0:1.0: USB hub found
Nov 01 09:48:57 danserver kernel: hub 1-0:1.0: 6 ports detected
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:13.2: EHCI Host Controller
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:13.2: debug port 1
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400
Nov 01 09:48:57 danserver kernel: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
Nov 01 09:48:57 danserver kernel: hub 2-0:1.0: USB hub found
Nov 01 09:48:57 danserver kernel: hub 2-0:1.0: 6 ports detected
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:12.0: OHCI PCI host controller
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000
Nov 01 09:48:57 danserver kernel: firewire_ohci 0000:03:08.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
Nov 01 09:48:57 danserver kernel: hub 3-0:1.0: USB hub found
Nov 01 09:48:57 danserver kernel: hub 3-0:1.0: 3 ports detected
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:12.1: OHCI PCI host controller
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000
Nov 01 09:48:57 danserver kernel: hub 4-0:1.0: USB hub found
Nov 01 09:48:57 danserver kernel: hub 4-0:1.0: 3 ports detected
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000
Nov 01 09:48:57 danserver kernel: hub 5-0:1.0: USB hub found
Nov 01 09:48:57 danserver kernel: hub 5-0:1.0: 3 ports detected
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:13.1: OHCI PCI host controller
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8fb000
Nov 01 09:48:57 danserver kernel: hub 6-0:1.0: USB hub found
Nov 01 09:48:57 danserver kernel: hub 6-0:1.0: 3 ports detected
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:14.5: OHCI PCI host controller
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
Nov 01 09:48:57 danserver kernel: ohci-pci 0000:00:14.5: irq 18, io mem 0xfe8fa000
Nov 01 09:48:57 danserver kernel: hub 7-0:1.0: USB hub found
Nov 01 09:48:57 danserver kernel: hub 7-0:1.0: 2 ports detected
Nov 01 09:48:57 danserver kernel: ahci 0000:00:11.0: version 3.0
Nov 01 09:48:57 danserver kernel: ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
Nov 01 09:48:57 danserver kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
Nov 01 09:48:57 danserver kernel: scsi0 : ahci
Nov 01 09:48:57 danserver kernel: scsi1 : ahci
Nov 01 09:48:57 danserver kernel: scsi2 : ahci
Nov 01 09:48:57 danserver kernel: scsi3 : ahci
Nov 01 09:48:57 danserver kernel: ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
Nov 01 09:48:57 danserver kernel: ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
Nov 01 09:48:57 danserver kernel: ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
Nov 01 09:48:57 danserver kernel: ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
Nov 01 09:48:57 danserver kernel: pata_atiixp 0000:00:14.1: setting latency timer to 64
Nov 01 09:48:57 danserver kernel: scsi4 : pata_atiixp
Nov 01 09:48:57 danserver kernel: scsi5 : pata_atiixp
Nov 01 09:48:57 danserver kernel: ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
Nov 01 09:48:57 danserver kernel: ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
Nov 01 09:48:57 danserver kernel: firewire_core 0000:03:08.0: created device fw0: GUID 001e8c000042fe5f, S400
Nov 01 09:48:57 danserver kernel: ata2: SATA link down (SStatus 0 SControl 300)
Nov 01 09:48:57 danserver kernel: ata4: SATA link down (SStatus 0 SControl 300)
Nov 01 09:48:57 danserver kernel: ata3: SATA link down (SStatus 0 SControl 300)
Nov 01 09:48:57 danserver kernel: usb 5-1: new low-speed USB device number 2 using ohci-pci
Nov 01 09:48:57 danserver kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 01 09:48:57 danserver kernel: ata1.00: ATA-8: WDC WD3200AAJS-56M0A0, 01.03E01, max UDMA/133
Nov 01 09:48:57 danserver kernel: ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Nov 01 09:48:57 danserver kernel: ata1.00: configured for UDMA/133
Nov 01 09:48:57 danserver kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJS-5 01.0 PQ: 0 ANSI: 5
Nov 01 09:48:57 danserver kernel: sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Nov 01 09:48:57 danserver kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 01 09:48:57 danserver kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 01 09:48:57 danserver kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 01 09:48:57 danserver kernel: sda: sda1 sda2 sda3
Nov 01 09:48:57 danserver kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 01 09:48:57 danserver kernel: hidraw: raw HID events driver (C) Jiri Kosina
Nov 01 09:48:57 danserver kernel: usbcore: registered new interface driver usbhid
Nov 01 09:48:57 danserver kernel: usbhid: USB HID core driver
Nov 01 09:48:57 danserver kernel: input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input0
Nov 01 09:48:57 danserver kernel: hid-generic 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:13.0-1/input0
Nov 01 09:48:57 danserver kernel: input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/input/input1
Nov 01 09:48:57 danserver kernel: hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:13.0-1/input1
Nov 01 09:48:57 danserver kernel: tsc: Refined TSC clocksource calibration: 3013.426 MHz
Nov 01 09:48:57 danserver kernel: usb 5-2: new low-speed USB device number 3 using ohci-pci
Nov 01 09:48:57 danserver kernel: input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input2
Nov 01 09:48:57 danserver kernel: hid-generic 0003:17EF:6014.0003: input,hidraw2: USB HID v1.11 Keyboard [Lenovo Mini Wireless Keyboard] on usb-0000:00:13.0-2/input0
Nov 01 09:48:57 danserver kernel: input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input3
Nov 01 09:48:57 danserver kernel: hid-generic 0003:17EF:6014.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Lenovo Mini Wireless Keyboard] on usb-0000:00:13.0-2/input1
Nov 01 09:48:57 danserver kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Nov 01 09:48:57 danserver systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Nov 01 09:48:57 danserver systemd[1]: Set hostname to <danserver>.
Nov 01 09:48:57 danserver kernel: Switched to clocksource tsc
Nov 01 09:48:57 danserver systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
Nov 01 09:48:57 danserver systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Nov 01 09:48:57 danserver systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Nov 01 09:48:57 danserver systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
Nov 01 09:48:57 danserver systemd[1]: Starting Remote File Systems.
Nov 01 09:48:57 danserver systemd[1]: Reached target Remote File Systems.
Nov 01 09:48:57 danserver systemd[1]: Starting LVM2 metadata daemon socket.
Nov 01 09:48:57 danserver systemd[1]: Listening on LVM2 metadata daemon socket.
Nov 01 09:48:57 danserver systemd[1]: Starting Device-mapper event daemon FIFOs.
Nov 01 09:48:57 danserver systemd[1]: Listening on Device-mapper event daemon FIFOs.
Nov 01 09:48:57 danserver systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
Nov 01 09:48:57 danserver systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Nov 01 09:48:57 danserver systemd[1]: Starting Delayed Shutdown Socket.
Nov 01 09:48:57 danserver systemd[1]: Listening on Delayed Shutdown Socket.
Nov 01 09:48:57 danserver systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Nov 01 09:48:57 danserver systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Nov 01 09:48:57 danserver systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Nov 01 09:48:57 danserver systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Nov 01 09:48:57 danserver systemd[1]: Starting Paths.
Nov 01 09:48:57 danserver systemd[1]: Reached target Paths.
Nov 01 09:48:57 danserver systemd[1]: Starting Encrypted Volumes.
Nov 01 09:48:57 danserver systemd[1]: Reached target Encrypted Volumes.
Nov 01 09:48:57 danserver systemd[1]: Starting udev Kernel Socket.
Nov 01 09:48:57 danserver systemd[1]: Listening on udev Kernel Socket.
Nov 01 09:48:57 danserver systemd[1]: Starting udev Control Socket.
Nov 01 09:48:57 danserver systemd[1]: Listening on udev Control Socket.
Nov 01 09:48:57 danserver systemd[1]: Starting Journal Socket.
Nov 01 09:48:57 danserver systemd[1]: Listening on Journal Socket.
Nov 01 09:48:57 danserver systemd[1]: Mounting Huge Pages File System...
Nov 01 09:48:57 danserver systemd[1]: Starting udev Coldplug all Devices...
Nov 01 09:48:57 danserver systemd[1]: Started Load Kernel Modules.
Nov 01 09:48:57 danserver systemd[1]: Starting Apply Kernel Variables...
Nov 01 09:48:57 danserver systemd[1]: Started Set Up Additional Binary Formats.
Nov 01 09:48:57 danserver systemd[1]: Mounting Debug File System...
Nov 01 09:48:57 danserver systemd[1]: Starting Create list of required static device nodes for the current kernel...
Nov 01 09:48:57 danserver systemd[1]: Mounting Configuration File System...
Nov 01 09:48:57 danserver systemd[1]: Mounting POSIX Message Queue File System...
Nov 01 09:48:57 danserver systemd[1]: Starting Setup Virtual Console...
Nov 01 09:48:57 danserver systemd[1]: Starting Journal Service...
Nov 01 09:48:57 danserver systemd[1]: Started Journal Service.
Nov 01 09:48:57 danserver systemd-journal[133]: Journal started
Nov 01 09:48:57 danserver systemd[1]: Mounted FUSE Control File System.
Nov 01 09:48:57 danserver systemd[1]: Starting Swap.
Nov 01 09:48:57 danserver systemd[1]: Reached target Swap.
Nov 01 09:48:57 danserver systemd[1]: Mounting Temporary Directory...
Nov 01 09:48:57 danserver systemd[1]: Started File System Check on Root Device.
Nov 01 09:48:57 danserver systemd[1]: Starting Remount Root and Kernel File Systems...
Nov 01 09:48:57 danserver systemd[1]: Expecting device dev-sda1.device...
Nov 01 09:48:57 danserver systemd[1]: Starting Root Slice.
Nov 01 09:48:57 danserver systemd[1]: Created slice Root Slice.
Nov 01 09:48:57 danserver systemd[1]: Starting User and Session Slice.
Nov 01 09:48:57 danserver systemd[1]: Created slice User and Session Slice.
Nov 01 09:48:57 danserver systemd[1]: Starting System Slice.
Nov 01 09:48:57 danserver systemd[1]: Created slice System Slice.
Nov 01 09:48:57 danserver systemd[1]: Starting system-netctl.slice.
Nov 01 09:48:57 danserver systemd[1]: Created slice system-netctl.slice.
Nov 01 09:48:57 danserver systemd[1]: Starting system-getty.slice.
Nov 01 09:48:57 danserver systemd[1]: Created slice system-getty.slice.
Nov 01 09:48:57 danserver systemd[1]: Starting Slices.
Nov 01 09:48:57 danserver systemd[1]: Reached target Slices.
Nov 01 09:48:57 danserver systemd[1]: Expecting device dev-sda3.device...
Nov 01 09:48:57 danserver systemd[1]: Mounted Huge Pages File System.
Nov 01 09:48:57 danserver systemd[1]: Started Apply Kernel Variables.
Nov 01 09:48:57 danserver systemd[1]: Mounted Debug File System.
Nov 01 09:48:57 danserver systemd[1]: Mounted Configuration File System.
Nov 01 09:48:57 danserver systemd[1]: Mounted POSIX Message Queue File System.
Nov 01 09:48:57 danserver systemd[1]: Mounted Temporary Directory.
Nov 01 09:48:57 danserver kernel: EXT4-fs (sda2): re-mounted. Opts: data=ordered
Nov 01 09:48:57 danserver systemd[1]: Started Setup Virtual Console.
Nov 01 09:48:57 danserver systemd[1]: Started Remount Root and Kernel File Systems.
Nov 01 09:48:57 danserver systemd[1]: Started udev Coldplug all Devices.
Nov 01 09:48:57 danserver systemd[1]: Starting Load/Save Random Seed...
Nov 01 09:48:57 danserver systemd[1]: Started Create list of required static device nodes for the current kernel.
Nov 01 09:48:57 danserver systemd[1]: Starting Create static device nodes in /dev...
Nov 01 09:48:57 danserver systemd[1]: Started Load/Save Random Seed.
Nov 01 09:48:57 danserver systemd[1]: Started Create static device nodes in /dev.
Nov 01 09:48:57 danserver systemd[1]: Starting udev Kernel Device Manager...
Nov 01 09:48:57 danserver systemd[1]: Starting Local File Systems (Pre).
Nov 01 09:48:57 danserver systemd[1]: Reached target Local File Systems (Pre).
Nov 01 09:48:57 danserver systemd[1]: Started udev Kernel Device Manager.
Nov 01 09:48:57 danserver systemd-udevd[156]: starting version 208
Nov 01 09:48:57 danserver kernel: ACPI: processor limited to max C-state 1
Nov 01 09:48:57 danserver kernel: acpi-cpufreq: overriding BIOS provided _PSD data
Nov 01 09:48:58 danserver kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
Nov 01 09:48:58 danserver kernel: ACPI: Power Button [PWRB]
Nov 01 09:48:58 danserver kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Nov 01 09:48:58 danserver kernel: ACPI: Power Button [PWRF]
Nov 01 09:48:58 danserver kernel: wmi: Mapper loaded
Nov 01 09:48:58 danserver kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 01 09:48:58 danserver kernel: [drm] Initialized drm 1.1.0 20060810
Nov 01 09:48:58 danserver kernel: ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 1 (20130517/utaddress-251)
Nov 01 09:48:58 danserver kernel: ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 2 (20130517/utaddress-251)
Nov 01 09:48:58 danserver kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Nov 01 09:48:58 danserver kernel: MCE: In-kernel MCE decoding enabled.
Nov 01 09:48:58 danserver kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
Nov 01 09:48:58 danserver kernel: sp5100_tco: PCI Revision ID: 0x3c
Nov 01 09:48:58 danserver kernel: sp5100_tco: failed to find MMIO address, giving up.
Nov 01 09:48:58 danserver kernel: EDAC MC: Ver: 3.0.0
Nov 01 09:48:58 danserver kernel: input: PC Speaker as /devices/platform/pcspkr/input/input6
Nov 01 09:48:58 danserver kernel: AMD64 EDAC driver v3.4.0
Nov 01 09:48:58 danserver kernel: EDAC amd64: DRAM ECC disabled.
Nov 01 09:48:58 danserver kernel: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Nov 01 09:48:58 danserver kernel: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
Nov 01 09:48:58 danserver kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
Nov 01 09:48:58 danserver kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
Nov 01 09:48:58 danserver kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
Nov 01 09:48:58 danserver kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
Nov 01 09:48:58 danserver kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
Nov 01 09:48:58 danserver kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
Nov 01 09:48:58 danserver kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
Nov 01 09:48:58 danserver kernel: snd_hda_intel 0000:01:05.1: setting latency timer to 64
Nov 01 09:48:58 danserver kernel: e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Nov 01 09:48:58 danserver kernel: e1000: Copyright (c) 1999-2006 Intel Corporation.
Nov 01 09:48:58 danserver kernel: microcode: CPU0: patch_level=0x010000b6
Nov 01 09:48:58 danserver kernel: [drm] radeon kernel modesetting enabled.
Nov 01 09:48:58 danserver kernel: microcode: CPU0: new patch_level=0x010000c8
Nov 01 09:48:58 danserver kernel: microcode: CPU1: patch_level=0x010000b6
Nov 01 09:48:58 danserver kernel: microcode: CPU1: new patch_level=0x010000c8
Nov 01 09:48:58 danserver kernel: microcode: CPU2: patch_level=0x010000b6
Nov 01 09:48:58 danserver kernel: microcode: CPU2: new patch_level=0x010000c8
Nov 01 09:48:58 danserver kernel: microcode: CPU3: patch_level=0x010000b6
Nov 01 09:48:58 danserver kernel: microcode: CPU3: new patch_level=0x010000c8
Nov 01 09:48:58 danserver kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Nov 01 09:48:58 danserver kernel: input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input15
Nov 01 09:48:58 danserver kernel: kvm: disabled by bios
Nov 01 09:48:58 danserver kernel: kvm: disabled by bios
Nov 01 09:48:58 danserver systemd[1]: Starting Sound Card.
Nov 01 09:48:58 danserver systemd[1]: Reached target Sound Card.
Nov 01 09:48:58 danserver kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Nov 01 09:48:58 danserver kernel: r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
Nov 01 09:48:58 danserver kernel: r8169 0000:02:00.0: irq 41 for MSI/MSI-X
Nov 01 09:48:58 danserver kernel: r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc90011ade000, f4:6d:04:d7:52:d4, XID 0c200000 IRQ 41
Nov 01 09:48:58 danserver kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Nov 01 09:48:58 danserver kernel: [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0
Similar Messages
-
Hi all,
I have a problem when filtering data in alv (I use REUSE_ALV_GRID_DISPLAY FM). The problem is that data is truncated in the matchcode of the filter.
I've seen several threads talking about this, but was not able to find the right solution for me... a lot of notes, and I think I shouldn't have to install all of them.. should I?
I followed this thread
ALV filter problem
but do not know the note installed by the asker in the end...
Could anybody help me?
Best RegardsHi,
Please apply OSS note 898852.
Regards,
Bharadwaj -
Hi expert ,
I have the problem on filter , which means
while there is no entry on the table , if click enter the filter action it shows runtim errors like that
Note
The following error text was processed in the system RD1 : Value 1 is not a valid index; context node: COMPONENTCONTROLLER.1.BBU_ITEMS
The error occurred on the application server BLR-RDEV-RD1_RD1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_ATTRIBUTE_PROPS_FOR_NODE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: IF_WD_CONTEXT_NODE~GET_ATTRIBUTE_PROPS_FOR_NODE of program CL_WDR_CONTEXT_NODE_MAP=======CP
Method: GET_NODE_STATE of program CL_WDR_TABLE_METHOD_HNDL======CP
Method: IF_WD_TABLE_METHOD_HNDL~APPLY_FILTER of program CL_WDR_TABLE_METHOD_HNDL======CP
Method: ONACTIONBBU_FILTER of program /1BCWDY/EAIL5PBJSQ5EPLFELLCZ==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/EAIL5PBJSQ5EPLFELLCZ==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
What should i do avoiding this one can anyone let me know about this problem ?
Thanks in advance
Sankar.MHi Sankar,
Do you mean to say like you get a dump when you enter some value in the filter field & press on enter while there is no data in the table?
If yes then give it a try in this manner. I haven't tried it out myself but its just a guess. You would have created an event handler for the FILTER event of your table. Say suppose your action handler method is ONACTIONON_FILTER then within this method you would be saying something like:
METHOD onactionon_filter .
" TABLE_CONTROL is TYPE REF TO IF_WD_TABLE_METHOD_HNDL
" Within WDDOMODIFYVIEW I obtain & save the reference of my table into TABLE_CONTROL
wd_this->table_control->apply_filter( ).
ENDMETHOD.
So instead of directly calling the apply_filter method first try to obtain the data being displayed in the table by using get_static_attributes_table method. Then check if the table is initial & call the apply_filter method only if the table is having some data.
Regards,
Uday -
Filter problem with operating system in french
Hello,
There is a problem with the "Operating System - Windows" filter in the french version of ZCC.
If you create a bundle and go into "Requirements" and add a filter with Operating system and you set it to "Version 6.1 - Windows 7 / Windows Server 2008 R2" you get this error
"Vos modifications ne peuvent pas tre appliques pour les raisons suivantes :
ErreurLa version doit tre sous la forme "x" "x.x.x.x". "
"You changes cannot be applied for the following reason : formatting must be x to x.x.x.x"
The format should be "6.1 - Windows 7 /Windows Server 2008 R2 Versions".
The filter does work as intended with the english versions of ZCC. I have no problem with that but some of our admin does.
PS : I am currently unable to open an SR because our licence has not been renewed yet. So i am reporting this here.
Thank you!Originally Posted by GuillaumeBDEB
Hi poplante, this bug is haunting Novell since version 11.0! Believe me on that. I'm the one who reported it. Here's the workaround.
1.Go to Server machine.
On Windows:
Go to
%ZENWORKS_HOME%\resources\properties\com\novell\ze nworks\core\web\internal\resources\CoreInternal_fr .proeprties
On Linux:
Go to
/opt/novell/zenworks/resources/properties\com/novell/zenworks/core/web/internal/resources/CoreInternal_fr.proeprties
2.change the property value of windows.versions.6.1 from "Versions 6.1 Windows 7 / Windows Server 2008 R2" to "6.1 Versions Windows 7 / Windows Server 2008R2"
3.Then Restart the server. The issue will be gone.
By the way you will see this bug reappear with every new update of ZENworks including new service packs and monthly updates. So keep this workaround at hand just in case.
Hope it helps!
GuillaumeBDEB
In 11.3 the value seems to be:
windows.versions.6.1=Versions 6.1 - Windows 7 / Windows Server 2008 R2
But should probably be set to:
windows.versions.6.1=6.1 - Versions Windows 7 / Windows Server 2008 R2
And the correct Linux path would be: /opt/novell/zenworks/resources/properties/com/novell/zenworks/core/web/internal/resources/CoreInternal_fr.properties.
This bug would probably take them a minute or two to fix, sad to hear that it's been there since 11.
Thomas -
Table filter problem Jdeveloper 11.1.1.1.0
Hi,
I have problem with table filtering. When I filter table to get only one row I can not select this row to update child table (row is shown as selected).
Is there some option to overcome this problem?
Regards, Rok KogovšekI have problem with table filtering. When I filter table to get only one row I can not select this row to update child table (row is shown as selected).Does your child table have the master table ID in its partialTriggers?
-
Experts,
We have a problem with Filter on Costcenter taking very very long time . When we click on Filter button on Cost center after executing a BW report, then a new window opens and nothing happens after that with a blank white screen in the filter window. We have tried so many options to improve performance but only one thing worked out as a work around.
I have deleted enteried in the master data table using TC SE14 and then reloaded master data. Then filter on this working now with in 1 min. But we have process chains running every day loading Master data .Once these process chains finish again when we filter on Cost center on the next day, now the problem still exists , takes long time to for filter window to open up. Is there any way to delete master data entries delete automatically. Any advice appreciated .
ThanksHi Kiran,
Is that u are doing the master data full upload?
Try to do delta loads.
If it is the client specific. Create a process chain to delete the same master data contents. and schedule the process chain to run daily night or just before the master data loads happen, so that it will not affect the runtime. Else have to delete the same manually.
Hope this helps u.
regards,
Kishore. -
Hi all,
I have a problem with upload file using JSF RI 1.1 + tomahawk.
I think that the problem is in the web.inf filter definition because I get these warns:
17:11:51,875 WARN Digester:127 - [ConverterRule]{faces-config/converter} Merge(null,java.math.BigDecimal)
17:11:51,890 WARN Digester:127 - [ConverterRule]{faces-config/converter} Merge(null,java.math.BigInteger)
17:11:52,578 WARN ExtensionsFilter:34 - Please adjust your web.xml to use org.apache.myfaces.webapp.filter.ExtensionsFilter
And also this error when I click in a button to go to the upload page:
16:47:47,250 WARN ReducedHTMLParser:468 - Invalid HTML; bare lessthan sign found at line 127
When I click in the button to go to the upload pages the first time i get this error ad with the second click I get the right page.
It seems like he go to the filter the first time and then to the faces servlet the second, it is possible?
this is the code of the web.xml:
<filter>
<filter-name>MyFacesExtensionsFilter</filter-name>
<filter-class>
org.apache.myfaces.component.html.util.ExtensionsFilter
</filter-class>
<init-param>
<param-name>uploadMaxFileSize</param-name>
<param-value>10m</param-value>
</init-param>
<init-param>
<param-name>uploadThresholdSize</param-name>
<param-value>100k</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>MyFacesExtensionsFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>
And this is the code of the page with upload:
<h:form id="upload" enctype="multipart/form-data" >
<h:outputText value="Gimme an image: "/>
<t:inputFileUpload id="fileupload"
value="#{fileUploadBean.myFile}"
storage="file"
required="true"/>
<h:commandButton value="load it up" action="#{fileUploadBean.upload}" />
</h:form>Anyone can help?
Thanx very much!
Message was edited by:
-Frizzi-I don't have org.apache.myfaces.webapp.filter.ExtensionsFilter in my libraries, I only have org.apache.myfaces.component.html.util.ExtensionsFilter. I also tried to change it, but it still don't work...
I tried to redo all the process, and now I can't even access the action method in my backing bean....
I repost the the file that I use:
This is the error that I get when I try to use the action method:
16:24:11,203 WARN ReducedHTMLParser:468 - Invalid HTML; bare lessthan sign found at line 135
16:24:11,203 WARN ReducedHTMLParser:468 - Invalid HTML; bare lessthan sign found at line 180 web.inf snippet:
<filter>
<filter-name>extensionsFilter</filter-name>
<filter-class>org.apache.myfaces.component.html.util.ExtensionsFilter</filter-class>
<init-param>
<param-name>uploadMaxFileSize</param-name>
<param-value>100m</param-value>
<description>Set the size limit for uploaded files.
Format: 10 - 10 bytes
10k - 10 KB
10m - 10 MB
1g - 1 GB
</description>
</init-param>
</filter>
<filter-mapping>
<filter-name>extensionsFilter</filter-name>
<url-pattern>*.shtml</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>extensionsFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>JSF page:
<h:form id="upload" enctype="multipart/form-data" >
<h:outputText value="Gimme an image: "/>
<t:inputFileUpload id="fileupload"
value="#{fileUploadBean.myFile}"
storage="file"
required="true"/>
<h:commandButton value="load it up" action="#{fileUploadBean.upload}" />
</h:form>BackingBean:
public class FileUploadBean {
private UploadedFile myFile;
private static Logger log =Logger.getLogger(FileUploadBean.class);
public String upload() {
log.info("FileUploadBean.upload");
try {
log.info("fileupload_isfile?"+ getMyFile().getBytes());
log.info("fileupload_path"+ getMyFile().getSize());
log.info("fileupload_name" + getMyFile().getName());
System.out.println("myFilename" +getMyFile().getName());
catch (Exception e){
log.info("Errore nell'upload");
return "ok";
}Please help... I don't know how to solve it. Coul anyone post me a simple WORKING example?
Thanx a lot!! -
Quadrature encoder on PCI 6220 DAQ custom digital filter problem
I am using both counters on my 6220 DAQ for quadrature encoders. What I am trying to do is filter some bounce that I am getting on the axes. I want to be able to custom set the minimum pulse width for each encoder (or both the same should be fine). The problem is that the digital filter using DAQmx channel property for each line seems to work fine (I haven't proven that this actually works) but one has to choose from preset values (the smallest being 2.55ms). I want to reject anything that is less the 10ms. This document mentions that you can set up a programmable filter based on an external filter clock. How do you actually do this? Is there no way to use one of the internal timebases for this? If so how? The "Digital Filtering Conciderations for TIO-Based Devices" entry in the NI-DAQmx help states that you can choose one of four different values for a debouncing filter on a PFI line (different values than the previously linked document) and a custom filter value.
OK here is the short question .... is there a way for me to digitally filter the lines coming into my counters to reject anything less then 10ms through software only? If so, how? If using an external timebase is required, how do I do this?
Thanks in advance for any help
GreycatHi Greycat,
Although the documentation does mention that you can have one programmable filter setting, this is only true for TIO-Based devices. Unfortunately, the NI-6220 is a M-Series, which means that the only allowable minimum pulse widths settings are 125 ns, 6.425 µs and 2.55 ms. More information on this can be found in your NI-DAQmx help under NI-DAQmx Device Considerations » Digital Filtering » C and M Series.
I believe for your application requirement, we would have to look into some oour Counter/Timer devices.
S_Hong
National Instruments
Applications Engineer -
Interactive Report Filter Problem
Hello,
I ran into a problem with an interactive report today. When the report first loads, no issue. If a filter is added, an error is returned. The error is actually generated by an assertion routine that raises and exception if a NULL value was passed in. Here's a modified/simplified version of the query:
SELECT id,
name,
dept,
emp.year_of_emp(hire_date) AS years_of_employment
FROM emp_table
WHERE id IN (
SELECT c001
FROM apex_collections
WHERE collection_name = 'EMPS_UNDER_MANAGER'
);Again, when the report first loads, no problem. Then when the manager applies, say a filter on dept, an error is raised from the emp.year_of_emp function because a NULL value was passed in.
I know that all emps with an emp id in the collection have a hire_date so I don't feel as though I should have to add another condition in the where clause to filter those out (although that is the work around at this point). Anyone have any ideas as to what could be causing this?
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecurRoel,
Hey there! Hope you enjoyed your time off ;) Thanks for having a look...
Yes, of course I "could" update the functions, but this is NOT something I want to do. I'm one of those people that subscribes to Coding by Contract and the assertion routines at the beginning and end of my subprograms are an important part of that.
This may be a lack of understanding on my part with regards to the order in which Oracle does it's thing - or a bug in Apex... I'm able to duplicate the problem on apex.oracle.com: dmcghan/test/test.
Log into the demo app with admin/dmcghan. The home page has an interactive report, filter the name and you should get the error. When you look at the query you'll see a filter in the where clause that goes against the apex_collections table. This is populated from the post-authentication procedure. Let me know if you have questions.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur -
Anyone familiar with Graduated Filter problems in LR-5?
My problem is that the filters only function with the edit pins and I cannot filter the complete image without selecting an area first. (My presets still work)
No clue what happened, please help me out.
Thanks!runningkatze wrote:
Thanks Rob...
You bet .
runningkatze wrote:
In LR 4, the tools seemed so much more forgiving. In LR 5, it is incredible sensitive.
I don't think there have been any algorithmic changes in red-eye, Lr5 vs. Lr4 (certainly none mentioned by Adobe, nor in Victoria Bampton's very thorough list of changes in Lr5, nor that I've noticed in the forums...), so if it is behaving differently (you sure it's not you? ), then it sounds like something is a-wonk now in your Lr5 (or was a-wonk before in your Lr4 ).
~R. -
Hi,
I am facing a problem with the ALV grid. Recently our system got upgraded to ECC 5.0
There is a column in the grid for displaying message texts.If i try to set a filter for the message text column,a popup comes as usual to select the values in the message column. In that popup, suppose a F4 help is taken, texts are getting truncated.
Could you please suggest any OSS notes need to be added for this?
Regards,
RajuHi,
try to use EDIT_MASK for that field and see.
you try this way..
<b>
Fieldcat-edit_mask = '==ALPHA'.</b>
for the text field.
Regards
vijay -
Xcelsius Using BICS filter problem
Hi
I am using xcelsius with bics remote services
Here my problem is like
In Bex query itself i put filter for products(Ex pencil,pen,Book,Papers)
in Data connectivity(xcelsius Side) screen also i applied filter(in input values)for product
I am using drill for pie chart to fill the filter cell in spread sheet
Based on the filtercell the listbox will display the product names
Here my problem is listbox is show pens and pencils(when i click on pens and pencils in pie chart respectively) but it not showing papers and books(when i click on books and papers in pie chart)
So what i am understood is filter is working properly but y its not applied for all product
Guys could you please help me?Hi Venkat,
Can you please tell me, which kind of Variable you are using for filtering.
If you are filtering without variable. your query won't give the data other than those materials u have filered globally( means in query global filter pane).
Even though your problem looks like issue with drill down. please check.
Thanks and regards,
Sriramvijay.R -
Hi ,
I am facing one problem related to security Filter for one user. We are on the Hyperion Version 11.1.2.1 Fusion Edition.
We had one user created in Shared Services with ID : TESTUSER and added in the group. Initially access for this user was working fine. Later on we deleted this user from shared services as we no longer needed this.
As per new requirement we are supposed to create a same user with same user name so we created again new user 'TESTUSER' and added into the same user group then we refreshed security from Planning Application through " Administration -> Application -> Refresh Database->Security Filters ". Refreshing security Filters created filter for above user and we checked this from EAS consol.
However when we log in to the Application through Smart View we are getting the below Error.
Cannot Open cube View.Essbase Error ( 1054060 ):Essbase Failed to select
Application APP1, because TESTUSER@Native Directory is not\
completely Provisioned by Planning.
Could you please advice how could we resolve this issue.Check whether the user is only an Essbase user. (I don't think that is the case, but in case)
Try changing the access type using
alter user username add application_access_type Planning; (don't know whether this works in latest release)
Try the stepsRAvery and _RahulS_mentioned.
Tried that in 11.1.2.2 access_type Planning is defered.
Regards
Celvin
http://www.orahyplabs.com -
Savitzky filter: problem writing to file
Hi,
I have a very weird problem. I m using a Savitzky Golay filter to smooth some data and I can see the correct filtered data on the graph on the front panel. Now, I want to write this filtered data to a file. So I wired the output of the SG filter to a spreadsheet file. On replotting the file, I notice that the graph that I obtain is identical to the input that I gave to the filter. I have attached some screenshots of the front panels and the replotted graph.
Figure one: Is the input to the SG filter
Figure two: Is the output of the SG filter.
Figure three: Is the waveform that I obtained from replotting the output that I wrote to a file.
Figure four: Is the SG filter and write to file VI screenshot.
Can someone please help me out. Its driving me crazy.
Thanks and regards.
Attachments:
sgfilter_writetofile.doc 314 KBYou index the output-array of the filter VI before you save it to file. So on the frontpanel you see the whole waveform, but you save only the first value to the file. Another evidendence for this is the messed up x-Axis (time) in the data loaded from your file. The data you see in the file is neither the data before, nor the data after the filter function. You see only the first value of each measurement. YOu have to put a for-loop arround your save to spreadsheet, or better would be to not index the array at all and write the whole array to file. You can use probes to see what I mean.
Hope this helps!
Andre -
DSP filter problem in modifying the Oscilloscope
The hardware and software I am using are:
LabVIEW: 5.1.1
DAQ device: PCI-MIO-16XE-50
VI programs: 2 Channel Oscilloscope(sample VI)
I want to modify the function of the sample VI of 2 Channel Oscilloscope to simulate the AC-GND-DC function of Real Oscilloscope.
I try it by using "Butterworth Filter" under
Function-->Signal Processing-->Filters to cut the frequency at 0Hz for "AC" function (cut all DC).
However, the output is not good as real Oscilloscope becasue the signal seen is not good and stable.
I even use order 10 filter to do it. But the result is also the same.
Any suggestions to my problem?The ac-coupling of an oscilloscope is not a filter a "0" Hz. It is normally just a simple capacitance that, with the 1MOhm input impedance of the oscilloscope, acts like a first order high-pass filter with a cut-off frequency of few hertz.
Try to implement a highpass Butterworth filter of order 1 and with a low cut-off frequency of 10 Hz.
You can then play with the cut-off frequency and see which value works best for you (remember to connect the right value to the sample frequency input of your filter). You can also try to increase the filter order to 2 (some measurement devices have input high-pass filters of order 2 or even 3).
Maybe you are looking for
-
How do i transfer a gift card from one acount to another?
how do i transfer a gift card from one acount to another?
-
Final Cut Crashes on any EXPORT
Turned on the computer today and needed to Export some projects through Compressor. About 2 minutes into the encoding Final Cut "Quit Unexpectedly". Tried several times with the same results. Final Cut also Quits when I export to "Quicktime Movie" &
-
Direct Database Request in MDX and Variable Promt
Hi I am use essbase as data source and for some restriction need use hand made MDX for returning data sets. But I need use linked report with cascaded promt. Can anybody knows howto work with DDR and MDX ? How create link to other report from DDR? p.
-
Restoring iPod music to a new computer
can I restore my iPod music to a new computer directly from my iPod? My first PC HD crashed.
-
HT201441 How do you contact the previous owner with a partial email?
How do you send an email to an unknown previous owner with only a partial email visible on an iCloud locked device? Is there a way to get the entire email address so the old owner can be contacted? There has to be a way to contact the previous owner.