IPTC core Date created from Exif Date created

I have to populate the Date Created IPTC field, and sometimes make mistakes because of the (illogical) US order of MM/DD/YYYY.
But that process could be automated since the info is already in the EXIF field.

The very talented and patient Paul Rigott is helping me on this not so uncommon request. http://forums.adobe.com/message/3353144#3353144
Hear, hear, engineering team, you should get him to beef up Bridge and all other applications!

Similar Messages

On my mac, photoshop cc "save as" removes capture date from exif data. How do I prevent this?

On my mac, photoshop cc "save as" removes capture date from exif data. How do I prevent this?

You had to reinstall CS6 after cancelling the CC as both were from the same Adobe ID. You can always use & keep both CC & CS6 together.
Please refer to the blog:
Can I install both CS6 and CC apps on my computer? « Caveat Lector
Other references are :
Creative Cloud Help | Install, update, or uninstall apps
What is the difference CS6 & CC Versions?
Regards
Rajshree

Will any of DDL command trigger a data flush from the data buffer to disk?

Will any of DDL command trigger a data flush from the data buffer to disk?---No.164

I mean if I issue the DDL commands Such as DROP, TRUNCAE, CREATE, Can these commands trigger a data flush action?

Retest Date Calculate from manufacturing Date

Dear all,
If we are doing Goods Receipt for Finished Goods, Semi Finished Goods or Raw Material the Retest date is calculated from Posting Date (GRN) as per SAP Standard. But our client required it should be the retest date is calculate from Manufacturing Date of Particular Material.
Please Guide How to Map it , what configuration i want to do in SPRO
s. sakthivel

Hi Shaktivel,
The same situation we faced in one of my pharma implementation, As per standard,retest date will be calculated from the GR date + retest period in days given in the master.If we want to create from the date of manufacturing date we have to opt for user exits.we done through an user exit during usage decision.
regards,
Lenin. A

Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL

Friends,
I have situation :
Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL.
when for the above ods and the data source when trying to delete the request whole data got delted.
All the data got deleted in the fore ground. no background job has been generated for this.
I ma really worried abt this issues. can u please tell me what should be the possibilities for this issue.
Many Thanks
VSM

Hi,
I suppose you want to know the possibilitiy of getting the data.
If the entire data is being deleted, you can reload the data from source system.
Load the setup table for your application. Then carry out init request.
Please note that you would have to take a transaction-free period for carrying out this activity so that no data is missed.
Once this is done, delta queues will again start filling up.

OS X Tip - Two Click's from EXIF data...

I tried the Tip shown below...and for me, it doesn't work as advertised...I only see the 'last saved' information...no EXIF data...I have another program I use to give me a complete list of the data...but why doesn't it work for me???
You’re Two Clicks from a Photo’s EXIF Data
When you take a photo with a digital camera, the camera embeds info directly into the file, including the make and model of camera, the exposure, shutter speed, and a host of other info (called eXiF data). That info is usually viewed within an application like Photoshop or iPhoto, but now you can view it right from the Finder.
Just click on the photo’s icon, then press Command-i to bring up the info dialog. When it appears, click on the right-facing triangle beside the words “More info” and the basic eXiF data will appear.
1.42 Mini 80 gb Mac OS X (10.4.8) 1gb BT/AP - 250gb FW - 320gb usb2

This is normal behaviour when saving to drives that are not HFS formatted.
See: http://docs.info.apple.com/article.html?artnum=106510
They are called "double apple" files, and contain resource fork and metadata relating to the file. For instance photoshop thumbnails or custom icons are stored in the "doulbe apple" part.

Data extraction from transctional data source

Hi all,
In bw 3.5 I am fetching data from r3 , vendor evolution(2LIS_02_S013) is name of that data source it is transaction type data source at that time data source(2LIS_02_S013) successfully replicate in bw
after it i make infoarea and its charactics and attribute and then create application component and create infosource but when i assign that data source to my infosource it can't show in pop-up or say i am unable to assign it
can anybody tel me why i am unable to assign transactional data source to my infosource

Ok what does it say when you try to assign InfoSource? Can you tell me more.
In the InfoSource Just on top of Transfer Structure there should be Assign DS Button click on this and assign DataSource or else Right Click on the DS and Assign InfoSource.(If you have IS created)
Message was edited by:
SV S

Determining Date Range from Pay Date Information

I have a table of employees with different pay dates because they are college interns and they leave at different dates, so their most recent pay date will be different. I have created a query to find the most recent pay date. The pay periods are bi-weekly.
I have a table called tblPayPeriods with all of the pay dates. I have created a query that pulls the most current pay date for each intern and I want to match that pay date to the pay date of the Pay Periods table and increment back twenty pay periods.
Once I have determined the oldest pay date I want to use that range for a calculation for average hours ultimately. I can handle the average hours part but I'm having trouble with the pay dates part of this. Any suggestions would be appreciated.
Thanks!
Here is the SQL statement to find the most current pay date for each intern:
SELECT tblMeasurementPeriod.EENum, Max(tblMeasurementPeriod.[Pay Date]) AS [MaxOfPay Date]
FROM tblEmployees INNER JOIN tblMeasurementPeriod ON tblEmployees.[EE Num] = tblMeasurementPeriod.EENum
WHERE (((tblEmployees.[Measurement Period])="initial"))
GROUP BY tblMeasurementPeriod.EENum;
Here is the SQL statement using the query joined to the pay date table:
SELECT qryFindLatestPayDateforINITIAL.EENum, qryFindLatestPayDateforINITIAL.[MaxOfPay Date], tblPayDate.[Pay Date]
FROM qryFindLatestPayDateforINITIAL INNER JOIN tblPayDate ON qryFindLatestPayDateforINITIAL.[MaxOfPay Date] = tblPayDate.[Pay Date];
Alicia Hunsberger

You have the Intern Last Pay Date (LPD)
You want to match that LPD to the pay date of the Pay Periods table...
** so the first question is - are you able to? what is the obstacle on this?
and increment back twenty pay periods
** is there a fixed math you can rely on, such as subtract 180 days?...will that work to determine the pay date 20 periods previously? it would be great if the pay periods had a sequential integer in their record - - - that would make it easy....

Calculate the date range from entered date

HI
My requirement is to get the data in a perticular intervals of posting date.
Directly we can create a variable with interval on posting Date to have the required data but Here we need two have two varibles because in one varibale user enters posting date and in second variable user enters any number like 1,2,3....etc
Let's say user enetered posting date as 30.08.2010 in the first variable and number 4 in the second variable.
Finally out put range should be calculted from entred posting date 30.08.2010 date to four days back
i.e output should be appear in the report from 27.08.2010 to 30.08.2010.
My question i can create first avariable on posting Date but where shoud i create the second variable on which field.
Please help me on this..points will be awrded.
Regards,
Siva Thottempudi.

R you talking about the below to create new variable on the existing key figure
Selecting Variables
When you select characteristic values in the query definition, you can also select variables instead of fixed values. These act as placeholders and are only filled with fixed values when the query is executed.
When selecting variables, you can also define new variables, change variables, or delete variables. These functions are always available to the right of the selection of the variable type.
Selecting Variables
1.      Choose Show ® Variables.
2.      Under Type, select the variable type (such as Characteristic Value Variable, Hierarchy Node Variable) from which you want to select the variable.
3.      Select one (or, in exceptional cases, more than one) variable from the list of available variables in the left window and add them (using the right arrow) to the right Selection window.
Selecting Variable Value Range Limits
1.      Choose Show ® Value Ranges.
2.      Select your required operator from the dropdown box. You can choose from the following operators:
○       Between
○       Less Than or Equal to
○       Greater Than or Equal to
○       Less Than
○       Greater Than
3.      Select the required value or values for the value range and choose . The input help appears in a new dialog box and displays the selection of variables under Show ® Variables.
4.      Under Type, select the variable type (such as Characteristic Value Variable, Hierarchy Node Variable) from which you want to select the variable.
5.      Select the required variable and choose OK.
6.      For the Between operator, two single values are required for the interval limits; the system automatically displays two dropdown boxes. In this case, repeat steps 3-5.
7.      After you have set the value range, choose OK.
8.      Add the selection to the right Selection window using the right arrow.

How to get date prompts from one date column

i have a requirement where i have to filter the data between two date prompts. i have only one date column and the date in the prompts shuld be selected by calendar.
i have seen may approaches to do this and i got one where two dummy date columns should be declared in repository and used to define the date prompts.
but using other methods i could not get the calendar option in prompt.
but is there any other way to get the prompts with calndar selection without defining the dummy columns in repository
thanks

you can do that first select the date column you want to use in dashboard prompt then select another column and in the dashboard prompts then open the fx of the date prompt you first selected copy that and paste it in the second column and in the control section click on calender it will work you can use same date column as two prompts with out creating new column.

PSE 10 editor changing date taken in EXIF data

Hello. I have just joined the forum after recently buying PSE 10 Editor for Mac. I had no trouble at first but now after I have saved an edit I find that the date taken has been changed to the same as the date modified & imported.
I can change it back manually through iPhotos menu but this is a bit of a nuisance when a lot of photos are involved, I don't know why it has happened but how do I reset it to give the correct date ?

I hate to be the bearer of bad news, but it didn't help. I lost another photo today and had to retrieve it
for the Organizer from my Windows files. Instead of placing it next to the original photo (or in the same area), it placed it in a file called Adobe/Photoshop.com. I made sure again that the line you referred to isn't checked. In addition, when the photo doesn't get lost, the Exif date for the photo does get lost and the photo is dated today. These two problems seem to be connected, although I can never predict which one will occur. Anybody have more ideas? Could it be a Windows 7 issue rather than a Photoshop issue?

Data come from difference data source

In my saturation, my program's data are come from difference data source. For example, the program will retrieve PO balance, material consumption, future consumption and so on. In my program logic, i retrieve all of the material number, the retrieve the PO balance, material consumption... into internal table, then loop the internal table of material number and update this table from internal table of po balance, material consumption..., but i found that the program's running time is long. How to improve the performance or any suggestion for the program logic. Thanks.

Hi,
Few Guildlines:
1. program is slow mainly because Database load is too high, try to reduce it and that load can be shared by ABAP. gotrhough SE30-perfromance tuning.
Also, in Se30 u will get all most important Tips and tricks, follow it,...
2. Try to find out summary table and dont try always to get data from basic tables.
3. Try to use perfect SELECT statemetn with porper joins, which is most important in reduction of load on DB.
4. you can make ABAP part faster, following coding standard like use of Binary search.
5. Use SLIN to find out which part of program is taking too much time, try to reduce it.
Hope this will guide u.
Jogdand M B

Batch change file date to match exif date

Hi All-
I recently got a mac pro. Upon importing my photos to iPhoto, the file date for each is set to the date of the import. When using the mac photo screensaver, the date that shows up for everything is the import date, rather than the date the photo was taken.
Is there any way to batch change the pictures so that the file date matches the date the picture was taken?
(Or, a way to have the screensaver use that date
Thanks,
-jamie

Interesting, but here is what I found out. I was annoyed because when I sucked in about 1000 JPGs from my camera's memory stick, and then I copied them to my Windows boxen, the file dates were wrong. I was surprised that there isn't an easy way to do this... until your post!! Thanks. *APPLE, Please fix the way "Originals" are stored during iPhoto import*, since something is wrong here. The file dates stored on my memory stick should have been used not the moment I clicked import in iPhoto.
So I moved my jhead to /usr/bin and gave it root ownership and 755 permissions.
All of the pictures seem to be three deep here:
cd ~/Pictures/iPhoto\ Library/Originals
ls -lsGrt /*/.jpg
But that is only a small fraction of mine. Most end in .JPG
ls -lsGrt /*/.JPG
So here is the commands to do the correction of the file date and time. You don't need the find command or that script, although you might need to snoop around and make sure all of your files are here and not any deeper or in some other location. but this should be harmless to run as long as you want to alter every file date.
jhead -ft /*/.jpg
jhead -ft /*/.JPG
And that pretty much does it. I don't see any images elsewhere that were brought in by iPhoto 6 on my machine. I looked for MPG files but I don't have any. This is from a video recording camera, so I don't have any MPGs.
So jrsmobile, my mileage varied a lot, since your method missed about 95% of my photos!!

Function Module which will take Wekk No & Return date range (from & To dat)

Hello everyone,
I need a Function Module which will take Week No as an input Parameter & return me the date range
(From date & To date of that week) .
Thanks in advance!
Cheers!
Moderator message: date calculation questions = FAQ, please search before posting.
Edited by: Thomas Zloch on Nov 2, 2010 5:25 PM

Hi,
     Please write the below logic..
data : v_date11 type sy-datum,
          monday    type sy-datum,
          sunday type sy-datum,
          v_count1 type i .
*v_count1 = 20 * 7.            "   Say U want details for 20th week , or give a parameter for week and multiply with 7*
v_date11 = '20100101'.     "   take the starting day of the year ....
v_date11 = v_date11 + v_count1.   " add to the date
CALL FUNCTION 'GET_WEEK_INFO_BASED_ON_DATE'   <-- call this FM
EXPORTING
   DATE          = v_date11
IMPORTING
WEEK          = WEEK
   MONDAY        = MONDAY <-- will have the week starting day
   SUNDAY        = SUNDAY
Regards,
Srini.

Datas return from Blob data type in Sqlite

i am using sqlitejdbc-v053.jar through get SQLITE BLOB data type data. But i cannot data return from Blob type.
Error will be display from :
not implemented by SQLite JDBC driver
and point out error line
blob = rs.getBlob("NGP_REPDATA");
{try {
               Class.forName("org.sqlite.JDBC");
                conn = DriverManager.getConnection("jdbc:sqlite:test.DB");
                stmt = conn.createStatement();
                rs = stmt.executeQuery("SELECT * FROM sometable");
                System.out.println("==============");
                while(rs.next()) {
                     blob = rs.getBlob("blobDATA");//
                     is = blob.getBinaryStream();
          catch(SQLException e) {
               e.printStackTrace();
          }}any sample or solution pls give
sqlite with BLOB sample there pls give link

There explicitly tells you that the JDBC driver that you are using will not do the method that you are calling.
Thus you cannot use that method.
There is another way to extract blobs which involves using a stream. You can search for that.
If your blobs are actually short and only have character data then you might be able to use getString() as well.

IPTC core Date created from Exif Date created

Similar Messages

Maybe you are looking for