Iputils issue, when connecting with netcfg.
I hope what I will do is correct to put it here.
I updated today iputils and suddenly I couldn't connect to my networks anymore.
I'm not an expert and I don't know exactly what was going on.
1) I tried to connect using netcfg to wireless with WPA security, and the result was dhcp lease attempt failed.
2) I tried to connect using netcfg to ethernet, same problem as before.
3) I used dhcp without netcfg and it connected correctly.
then I downgraded iputils and netcfg worked again.
Hi JimSmith,
Thanks for reply.
TNS entry as below:
ORCL_DB =
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 91.198.252.83)(PORT = 1521)) )
(CONNECT_DATA = (SID = orcl) (SERVER = DEDICATED) ) )
It works fine if I choose TNS (Network Allias: ORCL_DB).
For the Basic setting:
Hostname = 91.198.252.83
Port = 1521
SID = orcl
The error I received when connecting to db based on Basic option is Failure -Io exception: The Network Adapter could not establish the connection.
Below are the entries of SQLnet.ora. Any entry should I add into sqlnet.ora?
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Appreciate your comment.
Thanks.
Regards,
Jia
Similar Messages
-
Can't open app store in itunes when connected with ipad
Hi. Could anybody tell me how I can use app store in itunes when connected with ipad 2? When I click app store, it just gives no response at all. Thanks a lot!
Welcome to the Apple Community.
Do you have the power cable in, it won't show up with the power cable in.
Additionally, there have been some issues with the update servers, it's possible you won't be able to complete the update procedure anyway. -
Ea6300 causing network issues when connecting to web browser on my Mac
I have had my ea6300 for two months and its causing major issues when connecting to my web broweser before I throw it out the window can someone give me some help.
Hi bigtimer30, what do you mean by “it’s causing major issues when connecting to my web browser”? Do you mean that the MAC computer is no longer able to access the internet? If yes, is it with both wired and wireless connections? Is this happening to all of your devices? Or just that specific MAC computer? If all the other devices are still able to connect except the MAC, I suggest that you do a power cycle on the computer (if you haven’t done it yet). And you’re having difficulties with the wireless part, try to hard wire the computer straight to your router, and check if you experience the same thing. If the wired connection is okay, you may try playing with the router’s wireless channel. Better if you could give more details for us to give you more suggestions.
-
Will not recognize the Lucid LG when connected with USB
My Dell will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately. After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?
That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port. Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5
Keep us posted on any additional information/details about your issue.
Thanks,
MikeS_VZW
Follow us on Twitter @VZWSupport -
How to solve the noise issue when connecting an electric guitar?
Hello,
I own a 15'' MacBook Pro of early 2011, with Lion Mac OS X 10.7.2
I have an issue when connecting my electric guitar (Guitar Rig 4 LE) via USB & starting the Garageband '11 (ver. 6.0.4). I tried playing with the settings to get around the fuzziness/noise that's produced when the guitar is connected.
The original software I got with Guitar Rig 4 ALSO had a similar issue, but I solved it by turning down the ''Gate'' volume to get a clear guitar sound. I tried looking for a similar thing on Garageband but no luck. I'm taking the online lessons via Garageband, with all that noise it makes it even harder to learn.
Hope I made my case clear, and I'm looking forward for any suggestions in this technical problem I'm facing.
CheersHey Keith, thanks for your response.
Well, to be honest I had no idea what that was, so I opened Garageband and looked for that option, and it seems I can't access it during the guitar lessons. I tried exiting the lessons to the main window but the option you talked about under the ''Track'' tab was still faded (i.e. inaccessible).
Did I misunderstand you or done it wrong?
The noise even gets WORSE when trying out the Rock Guitar lessons, not so bad on the Basic Guitar & Blues Guitar...
By the way, I did try the ''Aggregate'' Audio MIDI setup thingy from the utilities to enable both ''Built-in Output'' & ''USB PnP Sound Device (which is the guitar)" and didn't solve the problem.
Running out of options. Opt for surgery? haha jk -
I am curious as to why my iTunes 10.4 won't open when connected with my Touch (v.4.3.5). iTunes used to open when connected with my Touch. Can anyone help me? Thankyou.
I have got a solution, it was shared on another 'apple support coummunity' board:
https://discussions.apple.com/message/15830348#15830348
It worked for me -
My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged -
I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?
Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
When connecting with FaceTime, I see other people then they hang up.
When connecting with FaceTime, I see other people then they hang up. Has anyone one else encountered this?
Usually, my wife contacts me with facetime, I try to accept connection and she sees other people form another country that quickly hang up.
This happens often.
ThanksThis seems to happen with the Iphone 5s if I am not mistaken
Thnaks -
Why isn't my iPad2 charging its battery when connected with my iMac?
Why isn't my iPad2 charging its battery when connected with my iMac?
A lot of computers, especially older ones (I don't know how old yours is), don't provide enough power through their USB ports in order to charge the iPad - it may still be charging, but at a low rate (it may charge quicker if the iPad's screen is off). If you want to charge it at a reasonable rate then the wall charger is better.
-
Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help
Hi!
It looks like there might be some security settings or software on your laptop that's preventing the restore process from working.
Check out this article in Apple's support. It shows you the steps you can take to try to get around error 1611.
Like diesel vdub said, a DFU-mode restore might give you success where a regular restore might not, so maybe you can try that.
What you need to do is put your phone into DFU mode, which is a low-level mode that helps the restore process get a little more done, or it can help iTunes get around certain roadblocks (hopefully like the one you're experiencing!). Your computer will install special DFU-iPhone drivers for it, and then iTunes will see it as a phone that needs restoring.
To get your phone into DFU mode:
Plug your phone into your laptop.
Turn the phone off.
Press and hold the power/lock button. Keep it held in, even after the display turns on and you see something on the screen. As soon as you see something on the screen, start holding the home button as well as the power button, so that they're being pressed together.
Keep both buttons pressed down for 10 seconds.
After 10 seconds, release the power button, but keep holding home until the laptop sees a new USB device. Once you see that, you're in DFU mode, and you can let go of buttons. Your iPhone screen will be blank during it all, even though it's actually on, in DFU mode.
Now your restore should work!
If your phone shows the Apple logo or anything else while you're trying to get it into DFU mode, then something went wrong. Try the steps again. If it suddenly starts up normally again, try reducing the time to a bit less than 10 seconds--try reducing it by about a second at a time. It should work! -
Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge
I have reached the same conclusion in the mean time. I have done a bit of investgation in to other grahics cards and am seeing some that show SPDIF connections from the card to the mother board. I was not familar with SPDIF but it did a little bit of sluething. It is of course a digitally enconded voice. I am guessing that in that case the mother board ( assuming it supports this hardware option) would use this output and be able to translate that digital audio to its other audio outputs. That is a lot of guessing of course. I think my "solution" might be a whole new desktop - a rather drastic course of action! I was in the proceess of getting ready to upgrade this machine anyway with a new graphics card (which I will now return), go to Win 7, and maybe even a new digital TV reciever, and I don't want to throw good money after bad anyway.
Thanks for your comments -
the resolution of my thunderbolt screen is not ok / sharp when connected with my air book. Who can help me out?
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages. -
Kerberos issue when connecting via VPN
Hi,
I am have some issues when connecting via VPN.
The following kdc log is issued when I log via VPN
May 02 12:12:21 ATHENA.MYDOMAIN.LAN krb5kdc[163](info): DISPATCH: repeated (retransmitted?) request from 192.168.2.5, resending previous response
May 02 12:12:21 ATHENA.MYDOMAIN.LAN krb5kdc[163](info): TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.2.5: UNKNOWN_SERVER: authtime 1146535939, [email protected] for ldap/[email protected], Server not found in Kerberos database
I also have a system log May 2 12:12:21 ATHENA DirectoryService[41]: GSSAPI Error: Miscellaneous failure (Server not found in Kerberos database)
This logs only happen while logging through VPN.
Any idea?
Cheers
BenHi,
When using your VPN are yo using Terminal LIcense or Remote Desktop Connection?
Please do the following to save form settings:
1. Only 1 module should be open when using form settings.
Close other modules that doesn't need.
2. Close the module after changed. To make sure the settings are saved.
3. Always close all the module before exiting SBO program, use the click FIle and Exit habit.
4. Terminal Licensing should be use when connecting remotely.
Thanks.
Clint -
I dropped my iphone 3gs now it goes on when connected with a charger but battery show 0% battery. as soon as i disconnect the charger the phone goes off....
Your the one saying it won't work properly, so yes it is broken.
Maybe you are looking for
-
iTunes How do you get a download to play if the song says you have downloaded it on 5 computers? I don't even own 5 computers. This is my first expierience with iTunes dowloads.
-
How to create universe folder in BO XI via SDK
Hi all, I'm just starting to use the BOXI SDK. I've used the sample to create new folders, it worked perfectly. But now I would like to create new universe folders but I have no idea how to do it. Here is the sample to create a folder : int addFolder
-
Hiding relationship cat. in BP transaction
Hi, I have a requirement to hide one of the relationship categories, while creating a BP as "Prospect". Anyone having any idea how to do it? I checked in config, there is no option to hide a relationship category.
-
Hi all we are a MDMP code page system and we upgraded to ECC 6.0. We fixed all our unicode errors by checking the unicode flag in the attributes we activated the program without any syntax errors or warnings. Now when we go back to UCCHECK, it still
-
Removing tool tip texts in pdf?
Hello there and good day. I have a pdf document in abobe 9, and it has hyperlinks and when I hover over them with the mouse it has the link addy in the tool tip text thing. I was wonder if there was a may to remove it or have that box blank. Thanks!