IPV4 assign static or dynamic IP automatically

Good morning,
I must often change my static IP and subnetmask from my D-Link, I am using W7 Professional 64Bit. I searched and found that one can create .batch file using for example:
NETSH INTERFACE IPV4 SET ADDRESS “Local Area Connection” STATIC 192.168.0.2 255.255.255.0 192.168.0.1
and then running them as an administrator should automatically change my settings without doing it manually. However this isn't working on my side. Running the batch file then directly typing in the cmd "ipconfig /all" I can see no changes on my D-Link (named
LAN-Verbindung 3 in my cmd). Am I doing something wrong? I thank you for your kind support.

The problem is probably that your network card is not named "Local Area Connection".
Try
NETSH INTERFACE IPV4 SET ADDRESS "LAN-Verbindung 3" STATIC 192.168.0.2 255.255.255.0 192.168.0.1
Also, the quotes should be "straight quotes", not "opening and closing" quotes like in the example you provided. BTW this is a common hurdle when copying and pasting code from the web.

Similar Messages

Perform static and dynamic check together on a customer?

Hello All,
Is it possible to perform static and dynamic check together on a customer?
I believe standard SAP does not allow both options together.
The scenario is: My client has customer who orders products 1 year in advance and create sales order with a future delivery date. The customer might have balance due on their account which is close to the credit limit. As a result the sale order should be blocked as if the automatic credit check is "Static". This would allow our customer service to call the customer and arrange for the payments.
Then 11 months later, a dynamic check should be performed on the customer to make sure the past due is under the credit limit. If the past due is over credit limit, the sales order must be blocked for delivery as if the credit check was "Dynamic" with 30 days horizon. This would again give our customer service time to settle the payment with the customer.
If anyone has implemented such a scenario, can you please give me an overview of how you did it?
Thanks very much in advance and Text Removed.
With Regards,
AM
Edited by: Lakshmipathi on Nov 13, 2010 9:23 AM
Please dont include this text

Static and Dynamic Cannot be Performed together. They are mutually exclusive events.
Credit check can be performed either at Sale order level or at Delivery / PGI Level.
FCV3 is a good report to see whether a customer would fail a credit check. ( suitable for your customer service )
Coming to your Point , Assuming that the customer is eligible for a Credit of 50 Lacs. Now the Customer has placed an order for 60 Lacs. We set the Customer credit checking at order level . The Customers Sale order would get blocked.
The Customer service will follow up for the payment and see to it that it is made. Assume the customer has made a payment for 70 Lacs.
Now let us have a look at the account statement of the customer.
Account Statement : Customer Cr : 70 Lacs. Dr : 0. ( because no delivery and invoice so far has been made )
So we are supposed to deliver the Material worth value of 60 Lacs.
The First sale order worth 60 Lacs has been unblocked in VKM3. Now at the time of Delivery level why would you want to chekc the Credit limit again ? It has already passed the credit check.
It is not necessary to check credit limit . Because you have already performed the same at the order level.
Now the customer has come again and raised another sale order for 80 Lacs. The System would block him.
The system will never block the Previous delivery which you are, due for delivery to the customer.
If we keep on checking the Credits without delivering we would end up only raising in Sale orders and no Delivery to the Customer at all. The Debit side of his account will always be 0.
So i donot think Static and dynamic is needed . you can go for either Static or Dynamic.

Static Vs Dynamic Safety stock

Hello Gurus
I want to know the following
1. Whats a Dynamic Safety Stock ?
2. The basic difference between Static Vs Dynamic Safety Stock
3.In which business scenario do we use a Dynamic & in which cases Static safety stock -

Dear Raja,
There are two types of availability checks
1) Availability Check for stock types in Inventory Management (Static Availability Check):
This check takes only the existing stock at the time of entry into account. This check is carried out automatically & no setting can be made for it in the system .It covers the relevant stock affected at the plant, storage location & special stocks level. The stock affected is determined via the movement type.
Ex: If you enter transfer posting with mvt 321 for 20 nos from Quality to unrestricted the system checks whether 20 nos.are actually available in Quality stock
2) Check of available stocks from the view point of MRP (Dynamic availability check):
In this case in addition to stock physically available in warehouse, here planned receipt & issues can also be taken into account. This check enables you to prevent an already reserved quantity from being withdrawn or reserved for another purpose.
For Ex; Today we have a stock of 100 nos. 25 pieces are reserved for withdrawal tomorrow & another 25 nos are reserved for day after tomorrow which means only 50 pieces are available today. If you try to create another reservation of 60 nos today system will give warning or error message.
Hope this will clear your concept
Vivek

SQL Server 2012 - 3 SQL clustered instances - one default/ two named instances - how assign/should assign static ports for named instances

We have two physical servers hosting 3 SQL 2012 clustered instances, one default instance and two named instances.
The default instance is using port 1433 and the two named instances are using dynamic port assignment.
There is discussion about assigning static port numbers to the two named clustered SQL instances.
What is considered best-practice? For clustered named instances to have dynamic or static ports?
Are there any pitfalls to assigning a static port to a named instance that is a cluster?
Any help is greatly appreciated

Hi RobinMCBC,
In SQL server the default instance has a listener which listens on the fixed port which is TCP port 1433. And for the named instance the port on which the SQL server listens is random and is dynamically selected when the named instance of the SQL server
starts.
For Standalone instance of the SQL server we can change the dynamic port of the named instance to the static port by using SQL server configuration manager as other post, however, in case of the cluster, when we change the port no. of the named instance
to the static port using the method described above, the port no. again changes back to the dynamic port after you restart the services. I recommend you changing the Dynamic port of the SQL Server to static port
on all the nodes , disabling and enabling the checkpointing to the quorum.
For more information, you can review the following article about how to change the dynamic port of the SQL Server named instance to an static port in a SQL Server 2005 cluster.
http://blogs.msdn.com/b/sqlserverfaq/archive/2008/06/02/how-to-change-the-dynamic-port-of-the-sql-server-named-instance-to-an-static-port-in-a-sql-server-2005-cluster.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

[SOLVED] Question about network setup static and dynamic

I am trying to set up an Arch install on my other pc. I have used Ubuntu and then Linux Mint for a year+ and Arch has always intrigued me so I am attempting to install it now. I do consider myself a pretty advanced computer user/programmer but computer networking has always confused me a little. I'm not quite understanding whether I setup my network with a static or dynamic ip. This is what I know
I have a static ip assigned to me by my ISP but I do have a router so it assigns me a different internal ip. Does that make my ip dynamic?
Last edited by c26zwj (2013-03-14 18:24:35)

If your ISP assigns a static IP then your IP in the internet is static. If you have a different internal IP then your router is running a DHCP server and performing network address translation. Your IP on the LAN is dynamic (unless you configure your router to assign static IPs, which can be useful if you want to forward ports to a specific computer). You most likely want to use DHCP to obtain a dynamic internal IP when you connect. The external IP is beyond your control (it is managed by the ISP and assigned to the router) so you do not need to worry about it.

Static or Dynamic Reorder Point and Safety Stock

Hi,
In a retail scenario, what would be the advantages over the other of setting a static or dynamic reorder point and safety stock?
The MRP type used is Time Phased Planning, but whether to let the system automatically set the reorder point and safety stock is the question. What should be considered in implementing this?
Regards,
Lee

hi,
As far as i know is static means manual entry of reorder point.
The dynamic or automatic reorder point is used for Forecast based planning...
the sysstem wii automatically calculate the reoder point evrytime there is the forecast run.
So, it dependig on ur scenario , select either manual or automatic.
First entry for both is always manual entry....
hope u got this..
Regards,
Smitha

AT0 : static and dynamic processing

dear guru ,
whose are the differences in assembly to order with planned
order between static and dynamic processing ?
Thanks.

Hi,
Static assembly processing :
If you create a sales order for a material with the 'assembly processing' technique, the system carries out an availability check for the components needed for the assembly and creates a single procurement element in the background.
The procurement element is assigned to the sales order directly. The number of the procurement element is determined in the sales order.
Dynamic assembly Processing :
If you create a sales order for a material with the 'assembly processing' technique, the system carries out an availability check for the components needed for the assembly. Depending on the results of the availability check, either one or several procurement elements are created. The quantity for a one-time delivery and/or the next possible deadline for a full delivery and/or a delivery proposal with then ext possible deadline are displayed on the availabililty control screen.
During dynamic assembly processing, you can not change the quantities and deadlines. You can, however, select the 'fix date and quantity' field, if necessary. The 'check scope' and 'other plants' functions are not available here.
The procurement element numbers are not saved in the sales order. The link between the procurement element and the sales order is created using the number of the individual stage (sales order number/item). For this reason, it is possible to carry out another availability check taking into account incoming stock and additional, manually entered procurement elements.
In Requirements class definition (OVZG), The assembly type indicator determines:
- Which procurement element is created
- Whether a 1:1 link exists between the sales order and the procurement element (static procedure) or whether a loose link exists with the option of splitting dates and quantities (dynamic procedure).
In the case of static assembly order processing, you make the changes to the production order directly from the sales order.
In the case of dynamic assembly order processing, you must call the production orders separately.
Also refer link below for more details:
http://help.sap.com/saphelp_47x200/helpdata/en/41/191eab45fd11d188ff0000e8322f96/frameset.htm
Regards,
Ashok

Credit Management: Difference Between Static and Dynamic Credit Check

Hi,
Could anyone tell the difference Between Static and Dynamic Credit Check?
According to website: http://www.sap-basis-abap.com/sd/difference-between-static-and-dynamic-credit-check.htm ... this is the answer:
====================
Simple Credit Check : Tr.Code - FD32
It Considers the Doc.Value + Open Items.
Doc.Value : Sales Order Has been saved but not delivered
Open Item : Sales Order has been saved , Delivered, Billed & Transfered to FI, but not received the payment from the customer.
Static Credit Check it checks all these doc value & check with the credit limit
1) Open Doc.Value / Sales Order Value : Which is save but not delievered
2) Open Delivery Doc.Value : Which is delivered but not billed
3) Open Billing Doc.Value : Which is billed but not posted to FI
4) Open Item : Which is transfered to FI but not received from the customer.
Dynamic Credit Check         1) Open Doc
                                            2) Open Delivery
                                            3) Open Billing
                                            4) Open Items
                                            5) Horizon Period = Eg.3Months
Here the System will not consider the above 1, 2, 3 & 4 values for the lost 3 months.
====================
Question 1: Could you further explain the above information, if there is any?
Question 2:: What is the Tcode to customize settings of:
a) Simple Credit Check (isn't this same with b) below?)
b) Static Credit Check
c) Dynamic Credit Check

Hi Tanish,
Diff between Static and Dynamic Filters.
Example One at report Level.
Create a variable for a Infoobject say ,Material .
1)In the Query Designer and if u restrict it to some 10 materials at query level, the report will display for only those 10 materials only.This is Static Filter.UR AHrdcoding it to those materials.You cant change them at Query Run time.i.e not changeable by user.
2)If u give the variable as input ,and when u run the query ,u can can choose the material,may 10 may be 1 or may 20 .It is dynamic.Changeable by user at run time
Example Two at DTP and Start Routine Level,say Document Type.
1)If u give filters in Start routine it is Static as u cannot change it in Production,not changeable by user.
2)f u give filters in DTP it is Dyanamic as u can change it in Production.U can give any doc type,Changeable by user at run time.
Hope it is Understood.
Rgds
SVU

Mixing static and dynamic content in a single outputText value causes NPEs

Hi,
I am having a problem and I'm wondering if it is a result of my error or if this is a bug.
I am mixing dynamic and static content in the value attribute of tags (e.g., outputText). On initial page load, everything works fine. However, if the same view is reloaded (e.g., after a failed validation) I get an NPE from JSF:
[#|2006-10-24T08:49:03.756-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=12;|StandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.lang.NullPointerException
        at com.sun.faces.el.MixedELValueParser.getNextToken(MixedELValueParser.java:140)
        at com.sun.faces.el.MixedELValueParser.parse(MixedELValueParser.java:123)
        at com.sun.faces.el.MixedELValueBinding.getValue(MixedELValueBinding.java:60)
        at javax.faces.component.UIOutput.getValue(UIOutput.java:147)
        at com.sun.faces.renderkit.html_basic.HtmlBasicInputRenderer.getValue(HtmlBasicInputRenderer.java:82)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.getCurrentValue(HtmlBasicRenderer.java:201)
        at com.sun.faces.renderkit.html_basic.LabelRenderer.encodeBegin(LabelRenderer.java:128)
        at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:443)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:609)
        at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:546)
        at com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:460)
        at org.apache.jsp.registration_jsp._jspx_meth_h_panelGrid_0(registration_jsp.java:324)
        at org.apache.jsp.registration_jsp._jspx_meth_h_form_0(registration_jsp.java:223)
        at org.apache.jsp.registration_jsp._jspx_meth_f_view_0(registration_jsp.java:157)
        at org.apache.jsp.registration_jsp._jspService(registration_jsp.java:118)
        at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
        at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
        at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
        at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
        at sun.reflect.GeneratedMethodAccessor188.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
        at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
        at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
        at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
        at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
        at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
        at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
        at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
        at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
        at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
        at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:326)
        at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:132)
        at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
        at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:248)
        at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
        at javax.faces.webapp.FacesServlet.service(FacesServlet.java:194)
        at sun.reflect.GeneratedMethodAccessor202.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
        at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
        at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
        at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
        at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
        at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
        at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
        at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
        at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
        at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)My code looks like this:
<h:outputText escape="false"
          value='<link href="#{myBean.styleSheet}" rel="stylesheet" type="text/css" />' />If I replace this with a much more convoluted set of tags, it works:
<h:outputText escape="false"
          value='<link href="' /><h:outputText escape="false" value="#{myBean.styleSheet}"
          /><h:outputText escape="false" value='" rel="stylesheet" type="text/css" />' />So is the problem that I am mixing dynamic and static content with a single value? If so, why does it work on the first view, and not after?
If it matters, I'm using the reference implementation version 1.1 (as included with NetBeans 5.5RC2) on SuSE 10.0 w/ JDK 1.5_09.
Thanks,
Bill

Yes, that's how I originally had it, but then changed it to the outputText approach since a single tag could do what I wanted, as long as I was allowed to mix static and dynamic content within a single value.
I think this is a bug in JSF 1.1, since if what I am doing is illegal, it should throw an exception on the first page view, not work on first view and throw an exception on subsequent views. I'm guessing that this has something to do with the fact that on first page view it only runs the restore view and render response JSF phases, while on subsequent requests all of the phases will be run, and it's in one of those other phases that the exception is thrown.
For now, multiple tags is the work-around, I guess.
Thanks,
Bill

Assigning a query dynamically to a cursor based on IF ELSE condotion

hello guys,
we are facing a problem while creating a procedure.
The procedure has been recreated in ORACLE from SQL SERVER 2005.
the problem is that in SQL server we can assign a query dynamically to a cursor so that it will be called at execution time.But this is not the case in oracle, i.e in Oracle its not allowed to assign a query to a cursor dynamically(OR IS IT...!!!)
the code is
vr_SQL varchar2(400);
declare
   cursor ord_cur ; <-----cursor declaration
begin
   If v_pIsScrutiny = 0 then   +<--------------second condition+
      vr_SQL:='Select NVL(ServiceID,0) ServiceID,OrdQty,+<-------query assignment to a variable+
          NVL(DrugID,0) DrugID,NVL(ServiceAmount,0) Rate,OrdDtlID
          from Orderdtl inner join ordermst on Orderdtl.OrdID = ordermst.OrdID
          Where Orderdtl.OrdID in (Select OrdID From Ordermst Where OrdVisitID = vr_visitid
          and TO_CHAR(ordermst.OrdDate,''DD-MON-YYYY'')
          Between TO_CHAR(vr_pActivationDate,''DD-MON-YYYY'')
          and TO_CHAR(vr_pExpiryDate,''DD-MON-YYYY'')
          ) And NVL(Orderdtl.Cancelled,0) = 0 And NVL(Orderdtl.PackageID,0) = 0
          and NVL(Orderdtl.DrugID,0) = 0;';
    Else +<--------------first condition+
        Update OrderDtl Set PackageID = 0 , AllocationID = 0 , ConsumptionID = 0
        Where OrdID in (Select OrdID From Ordermst Where OrdVisitID = vr_visitid)
        And AllocationID = v_pHCPAllocationID;
       vr_SQL:= 'Select NVL(ServiceID,0) ServiceID, +<-------query assignment to a variable+
       OrdQty,NVL(DrugID,0) DrugID,NVL(ServiceAmount,0)
        Rate,OrdDtlID
       from Orderdtl inner join ordermst on Orderdtl.OrdID = ordermst.OrdID
       Where Orderdtl.OrdID in (Select OrdID From Ordermst Where OrdVisitID = vr_visitid
       and TO_CHAR(ordermst.OrdDate,''DD-MON-YYYY'')
       Between TO_CHAR(vr_pActivationDate,''DD-MON-YYYY'')
       and TO_CHAR(vr_pExpiryDate,''DD-MON-YYYY'')
       ) And NVL(Orderdtl.Cancelled,0) = 0 And NVL(Orderdtl.PackageID,0) = 0;';
    end if;
       ord_cur is vr_SQL; +<----------query assigned to a cursor variable+
    ord_rec ord_cur%ROWTYPE;
   if not ord_cur%ISOPEN then
        open ord_cur;
   end if;
    loop
    fetch ord_cur into ord_rec;
    exit when ord_cur%NOTFOUND;So currently we are stuck with this problem.
Any solution would be of great help..
thank you

841363 wrote:
hello guys,
we are facing a problem while creating a procedure.
The procedure has been recreated in ORACLE from SQL SERVER 2005.
the problem is that in SQL server we can assign a query dynamically to a cursor so that it will be called at execution time.But this is not the case in oracle, i.e in Oracle its not allowed to assign a query to a cursor dynamically(OR IS IT...!!!)The problem is that you are thinking in SQL Server terms and Oracle just isn't SQL Server.
You need to consider using ref cursors for such things (sys_refcursor) e.g.
SQL> CREATE OR REPLACE PACKAGE reftest IS
2    PROCEDURE test(P_no in number, cur_o OUT sys_refcursor);
3 end;
4 /
Package created.
SQL>
SQL> CREATE OR REPLACE PACKAGE body reftest as
2    PROCEDURE test(P_no in number, cur_o OUT sys_refcursor) as
3      myexc exception;
4    BEGIN
5      if P_no = 1 then
6        open cur_o for select empno, ename from emp;
7      elsif p_no =2 then
8        open cur_o for select deptno, dname from dept;
9      else
10        RAISE myexc;
11      END IF;
12    exception
13      when myexc then
14        raise_application_error(20991,'input must be 1 or 2');
15    end ;
16 end reftest;
17 /
Package body created.
SQL> var x refcursor;
SQL> exec reftest.test(1,:x);
PL/SQL procedure successfully completed.
SQL> print x;
     EMPNO ENAME
      7369 SMITH
      7499 ALLEN
      7521 WARD
      7566 JONES
      7654 MARTIN
      7698 BLAKE
      7782 CLARK
      7788 SCOTT
      7839 KING
      7844 TURNER
      7876 ADAMS
      7900 JAMES
      7902 FORD
      7934 MILLER
14 rows selected.
SQL> exec reftest.test(2,:x);
PL/SQL procedure successfully completed.
SQL> print x;
    DEPTNO DNAME
        10 ACCOUNTING
        20 RESEARCH
        30 SALES
        40 OPERATIONS
SQL>

How to specify "static" or "dynamic" text in Flash CS5?

Hmmm. Things have moved in version CS5! How would I specify text as "static" or "dynamic"? Can't seem to find the selection in the Properties palette.
Thanks-

Should be right at the top of the properties panel. Make sure to select your text box first. Also, change TLF text to classic text.

Selecting both static and dynamic values in a report.

Hello,
I am using the following LOV for a select list in a form based on another post (Re: Static and Dynamic LOV ordering
It is presenting five static values along with a dynamic LOV.
select d, r
from (select n, d, r
from (select 1 as n, 'NAME_A' d, 1 r
from dual
union all
select 1 as n, 'NAME_B' d, 2 r
from dual
union all
select 1 as n, 'NAME_C' d, 3 r
from dual
union all
select 1 as n, 'NAME_D' d, 4 r
from dual
union all
select 1 as n, 'NAME_E' d, 5 r
from dual
union all
select 2 as n,
(LNAME || ', ' || FNAME || ' (' ||
to_char(DOB, 'MM/DD/YYYY') || ')') display_value,
ID return_value
from my_name_table)
ORDER BY n, r asc)
The static display and return values do not exist in my_name_table, but the static return values are recorded in my_main_table when the user submits the form.
The tables look like this:
my_main_table:
record_id
name_id
my_name_table:
name_id
fname
lname
How can I present the display values associated with the static return values recorded in my_main_table along with the dynamic display values in a report? I am currently presenting the dynamic portion in a report using the following select statment:
select
(my_name_table.LNAME||', '||my_name_talbe.FNAME) AS Name
from my_name_table
WHERE my_main_table.NAME_ID = my_name_table.NAME_ID
I have the additional problem that the static return values are not in my_name_table so the join in the last statement will not find the static values in my_name_table.
Edited by: mterlesky on Feb 24, 2009 9:51 AM

1. You will need to add an outer join to return all the values in the Main table.
2. Then decode the values for the static LOV.
Something like (this is not tested, but should give you the idea)
select
decode(my_main_table.NAME_ID,1,'NAME_A',2,'NAME_B',3,'NAME_C',4,'NAME_D',5,'NAME_B',(my_name_table.LNAME||', '||my_name_talbe.FNAME)) AS Name
from my_name_table
WHERE my_main_table.NAME_ID = my_name_table.NAME_ID(+)
This will all break if any of your static LOV ID values clash with your dynamic LOV ID values.
I am now going to give you a long lecture about hard coding values ..... ;)
Related info: http://simonhunt.blogspot.com/2009/02/how-to-cope-with-list-of-values-lovs.html
I hope that helps
Shunt

Assigning Static IP (not local static, internet) to server

I use linksys router in my office. WRT54GS V4
I have T1 line and my ISP provides 5 Static IP address.
DHCP option is turned on in my router. My server is connected to the router.
If I configure my server with static IP that my ISP provided, my server will not connect to internet.
It seems to me that only way to assign static IP to my server is to get a switch/hub
and connect server and my router to this switch/hub.
Or turn off DHCP option and configure networksetting for each PC n my office. For this case,
I have to assign some with local IP and some with static IP. Can it work?
If you have any suggestion, let me know.
Thanks.
Solved!
Go to Solution.

The WRT54GS is a consumer router. It does not support multiple public IP addresses.
The only way it will work is the way you already found: connect a switch to the internet line and then connect the server and the internet port of the WRT to the switch. Of course, you should make sure to configure the firewall on the server very well as it is fully exposed to the internet.
Otherwise you have to get a business router which supports multiple public IP addresses, e.g. the Cisco Small Business series or better.

Static Tables Creation In oracle & Diff Between Static table ,Dynamic table

Static Tables Creation In oracle & Diff Between Static table ,Dynamic table

972471 wrote:
Static Tables Creation In oracle & Diff Between Static table ,Dynamic tableAll tables in a well designed application should be static tables.
Whilst it's possible to execute dynamic code and therefore create tables dynamically at run time, this is considered poor design and should be avoided in 99.99% of cases... though for some reason some people still think they need to do this, and it's never really justified.
So what issue are you facing that you need to even bother considering dynamic tables?

[svn:osmf:] 10587: Modified the Akamai Plugin Sample app: 1) Added the new MAST plugin; 2) Added support to load the plugins as static or dynamic

Revision: 10587
Author:   [email protected]
Date:     2009-09-24 18:42:35 -0700 (Thu, 24 Sep 2009)
Log Message:
Modified the Akamai Plugin Sample app: 1) Added the new MAST plugin; 2) Added support to load the plugins as static or dynamic
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.actionScriptProperties
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.project
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.css
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml

Revision: 10587
Author:   [email protected]
Date:     2009-09-24 18:42:35 -0700 (Thu, 24 Sep 2009)
Log Message:
Modified the Akamai Plugin Sample app: 1) Added the new MAST plugin; 2) Added support to load the plugins as static or dynamic
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.actionScriptProperties
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.project
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.css
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml

IPV4 assign static or dynamic IP automatically

Similar Messages

Maybe you are looking for