IPV4 gone when using Hyper-v

Hello,
I have multiple hyper-v machine's running on my Windows 8.1 professional, for my education. I just checked my ipv4 address and i noticed that i don't have an ipv4 address. I do have Internet and a working connection but i cant seem to set a staticipv4 address.
I do need a staticipv4 address since i also use my PC as a media server.
I have 3 network adapters:
- 1 physical adapter, connecting the Ethernet cable to my machine
- 1 Hyper-v external card, connecting my virtual NAT router to the Internet
- 1 Hyper-v Internal card, connection all my virtual machines together.
Please help.
Kind regards,
Rvoosterhout

Yes with DHCP i have working Internet connection.
When I copy and enter my static IP, with the exact data i got from my DHCP server:
IP 192.168.1.102 (scope 100 until 200)
SNM: /24
DFGW: 192.168.1.1
DNS: 212.54.44.54 (my isp's DNS address)
When i enter this data as a static IP, I lose my Internet connection, also when i try a different IP address.
What I did right now is assign a static IP to my mac address in my Router. Now i'll wait 8 hour to see if I keep the same IP address, then it's also solved

Similar Messages

Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Cluster

Hi,
Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Hyper-V Cluster with CSV's? Can't find a clear answer somewhere.
Thanx for helping me out.
DJITS.

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

Content of textfields is gone, when using LiveCycle Designer Version 8.2

Hi there,
I´m having a Problem with LiveCycle Designer in Version 8.2 (exactly 8.2.1.4029.1.523496). When It try to open a PDF-document containing an AcroForms-Form with some textfields, I can see all the textfields of the document, but their content (the text) is missing, I only see the empty fields.
When I use LiveCycle Designer Version 8.1 (exactly 8.1.1.3021.1.438934) everthing works fine. The xml-sources produced by the two differnt LiveCycle-versions look different, too.
Is there any known bug or something, which could explain this behaviuor?
Thanx a lot
Chris

Hi Paul,
in the attachment you´ll find the pdf-Document and two xdp-files which I
generated with LiveCycle 8.1 and 8.2. They look pretty different, e.g. in
8.2 all of the
Kopie
Thema
Content of textfields is gone, when using
LiveCycle Designer Version 8.2
Not that I am aware of ....I assume you mean that when you open the form
in Acrobat the data is gone ...can you send the form and data to
mailto:[email protected] and I will have a look when I get a chance.
Paul

Intel SpeedStep & TurboBoost stops working when using Hyper-V

Hi guys,
Several times my CPU speed got "stuck", not using SpeedStep or TurboBoost (i5, Ivy Bridge). Finally, I found out it happens when I use Hyper-V. Sometimes, not always. But after the next restart, the CPU won't change the speed anymore. Thus wasting battery and loosing performance. Looks like a bug to me. But if it's Microsoft or Lenovo, who knows...
The event log is as follows:
The speed of Hyper-V logical processor 0 is being limited by system firmware.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Processor-Power" Guid="{0F67E49F-FE51-4E9F-B490-6F2948CC6027}" />
<EventID>37</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>7</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-01-02T04:20:34.648024800Z" />
<EventRecordID>127825</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="3644" />
<Channel>System</Channel>
<Computer>Charly13</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="Group">0</Data>
<Data Name="Number">0</Data>
<Data Name="CapDurationInSeconds">1</Data>
<Data Name="PpcChanges">2</Data>
<Data Name="TpcChanges">0</Data>
<Data Name="PccChanges">0</Data>
</EventData>
</Event>
If I helped you, please give me some kudos! ^^

Bump? :'(
If I helped you, please give me some kudos! ^^

720IX Raid Monitor software when using Hyper-V

Rd650 Server 720iX raid, Running hyper V Server with 3 sets of raid,
Raid is created properly, installed my 1st Vm of Win2012 R2 Virtual but I also want to monitor the raid, but since it's virtual I'm not sure how to set this up.
I instaleld "Graphics-based Management Utility for LSI SWR / HWR for RHEL / SLES Linux & Windows OS - ThinkServer Systems "
which I'm not sure is the correct monitor to view the raid, but non the less it can't detect the raid card. or see the raid.
Does anyon have any tips on how to monitor my raid on a hyper V server 2012?

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

HT204389 Mail & Text Message Sounds Gone When Using Siri

The confirmation "vwoop" or "swoosh" that would annunciate a message or text being sent by Siri stopped working. I am blind so this feature is important to me.
I took my phone to an AT&T corporate store and they had a replacement sent to me. The problem remains even with this new iPhone, and after further investigation it appears this may be related to an iOS update, as others I have spoken with also say they lost that sound after Siri sends a msg or text. This phone is running 6.1.2. Is this a bug or what? Will this be addressed in an update?

Just tried that, and no go. Thanks for the suggestion, though.
I got a message from the head of service where I take my Mac for repairs, and he says Rules never work for him, that it just messes up and disappears his messages.
Any other similar experiences?

VM Activation problem when using Internal Virtual Switch mode

Hello,
I have setup Windows 2012 R2 Standard Version host machine. Hyper-V setup successful. Host machine already activate license.
I have got a problem is when VM connecting with Internal virtual Switch. It will not able to process Windows activation. If it connected using External Virtual Switch, it can successful do windows activation. However, using External Virtual
Switch, one more WAN IP will be used.
I am using ICS method to share the network interface to Internal Virtual Switch.
Is it what problem and how to resolve it?
Thanks!

Hi Gyorgy,
What is the version of your guest operating system? Why not we create an External Virtual switch to access Internet when using Hyper-V guest system? (Some reference if needed:Hyper-V Virtual Switch
Overview )
The network connection seems to be fine, if you mean the webpage can't be displayed through Internet Explorer, please take a look at the article below:
"Internet Explorer cannot display the webpage" error
For more information, please check:
Fixing "Page cannot be displayed"
Best regards
Michael Shao
TechNet Community Support

Hyper links are gone when i sync with ipad

hyper links are gone when i sync with ipad2????

Currently, the iOS version of Keynote does not support hyperlinks.

V490 is not loging using hyper terminal after modifying hosts file

Dear ALL,
I am new user of Solaris 10. My Director has given me task to configure Sun fire V490 server. Today I was configuring the Network of the server using vi editor , I had change the ip from /etc/inet/hosts file after modifying the file I had restarted the system but it was not loging into root user. it gives an error "unable to login" , I searched the problem and find out that I missd the netmask file to modify but now I am unable to loging through hyper terminal . I am configuring the server using hyper terminal , is there other way to configure the server , because there is no vga card for the monitor display. How can I modify my server files. Please help me in this regard . I shall remain thankful to you.

With Lions should be fine editing the standard /etc/hosts file
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1           localhost
add here your IPv4 hosts list
255.255.255.255     broadcasthost
::1                 localhost
fe80::1%lo0         localhost

Cannot get hardware limits to work when using Lintech switches with a ACR9000 motion controller

This has been my conversation with Parker Automation.
From: Susan Connors <[email protected]>
Date: April 21, 2015 at 8:52:55 AM CDT
To: Bowlerdusty <[email protected]>
Subject: Re: ACR 9000
Hi Dustin,
Since the product was not purchased from us, or through the Parker website, but through National Instruments, you would need to contact them and they should be able to help.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company - Automation Group
Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
Toll Free: 1-800-866-4568 ext 5352
On Mon, Apr 20, 2015 at 4:16 PM, Bowlerdusty <[email protected]> wrote:
Hi again. Since last speaking, we have gotten the motor to move. The only thing we are struggling on now is getting the hardware limits to work. We are using switches provided by Lintech. One pair of switches is mechanical and the other pair are non-contact reed switches. I found out earlier that the product was purchased from National Instruments Co. Anyway we could receive some help with this?
Thanks,
Dustin Brown
-----Original Message-----
From: Susan Connors <[email protected]>
To: Bowlerdusty <[email protected]>
Sent: Tue, Feb 3, 2015 12:52 pm
Subject: Re: ACR 9000
Dustin,
I am checking with our manager and engineers on this and will let you know.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company Automation Group - Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
[email protected]
www.cross-automation.com
Cross Automation Line Card
We welcome your feedback on our customer support team. Please email my manager: [email protected]
On Mon, Feb 2, 2015 at 3:10 PM, Bowlerdusty <[email protected]> wrote:
Could it possibly be under some other name? There are other divisions it could possible be under. This place is also under the U.S. Army Corps of Engineers, so it might be under that name. And if this wasn't purchased from this company, then where was it purchased from? This is the company I was sent to when I contacted the Parker Motion support.
-----Original Message-----
From: Susan Connors <[email protected]>
To: bowlerdusty <[email protected]>
Sent: Fri, Jan 30, 2015 4:13 pm
Subject: Fwd: ACR 9000
Hello,
We have checked and show no record of your company or this part being purchased from us, so this is not something that we can offer support.
I do not know of an integrator in your area but you should contact a local one that could possibly help you trouble-shoot any questions you have on this unit.
Regards,
Susan
Susan Connors
Customer Service Representative
Cross Company Automation Group - Employee Owned Since 1979
Direct Dial: 704-755-1048 Fax: 704-523-6500
[email protected]
www.cross-automation.com
Cross Automation Line Card
We welcome your feedback on our customer support team. Please email my manager: [email protected]
---------- Forwarded message ----------
From: Bowlerdusty <[email protected]>
Date: Fri, Jan 30, 2015 at 3:59 PM
Subject: Re: ACR 9000
To: [email protected]
Any idea of when I'll get a response?
-----Original Message-----
From: AG Sales Fax <[email protected]>
To: bowlerdusty <[email protected]>
Sent: Fri, Jan 30, 2015 11:03 am
Subject: Fwd: ACR 9000
-- Can you please advise Company name and location so I can forward to appropriate contact?
---------- Forwarded message ----------
From: 'Bowlerdusty' via [email protected] <[email protected]>
Date: Fri, Jan 30, 2015 at 10:32 AM
Subject: ACR 9000
To: [email protected]
I was told to contact you guys for help with this. Can you be of some assistance?
-----Original Message-----
From: jhoagland <[email protected]>
To: Bowlerdusty <[email protected]>
Sent: Thu, Jan 29, 2015 3:44 pm
Subject: Re: ACR9000
There are free training videos on our website:
http://www.parkermotion.com/products/Controllers__6934__30_32_80_567_29.html
This unit was purchased through Cross Automation.
They are your local Parker ATC distributor and can give you assistance though the unit is out of warranty.
Their phone number is: 704-523-2222
Let me know if there’s any questions. Have a nice day.
Regards,
Jonathan
-----Original Message-----
From: Bowlerdusty < [email protected]>
To: emn_applications < [email protected]>
Sent: Thu, Jan 29, 2015 2:57 pm
Subject: Fwd: ACR9000
Here is a pic of the serial number and model number.
-----Original Message-----
From: emn_applications < [email protected]>
To: Bowlerdusty < [email protected]>
Sent: Thu, Jan 29, 2015 11:36 am
Subject: Re: ACR9000
On the other side of the ACR9000 is a label with the model number, SO and
serial number. Please provide.
Regards,
Jonathan
Application Engineering Team
[email protected]
phone 800-358-9070 · international 1-707-584-7558
www.parkermotion.com
Parker Hannifin Corporation · Electromechanical Automation, NA
5500 Business Park Drive · Rohnert Park · CA · 94928
Bowlerdusty <[email protected]>
To
[email protected]
01/29/2015 09:19 AM
cc
Subject
Re: ACR9000
I honeslty don't know this information. This stuff was bought at least a
few years ago. A student who is now gone had put it together a while back.
There were a lot of binders with it for instructions but none of it was
very clear to me. I'm sending pictures with the parts I have
(controller,drive,motor,etc.).
-----Original Message-----
From: emn_applications <[email protected]>
To: Dustin Brown <[email protected]>
Sent: Wed, Jan 28, 2015 10:17 am
Subject: Re: ACR9000
OK. So now you'd program it using the Configuration Wizard in ACR-View and
the program editor.
Which Parker ATC distributor did you purchase this through?
Regards,
Jonathan
Application Engineering Team
[email protected]
phone 800-358-9070 · international 1-707-584-7558
www.parkermotion.com
Parker Hannifin Corporation · Electromechanical Automation, NA
5500 Business Park Drive · Rohnert Park · CA · 94928
Dustin Brown <[email protected]>
To
[email protected]"
01/28/2015 07:58 AM <
[email protected]>
cc
Subject
Re: ACR9000
Hi thanks for the reply. We got it connected via Ethernet now. We had to
change the IP address of "local area connection" on the computer to
192.168.10.1 for it to see the controller. So now that it is connecting to
the controller, it keeps saying that the drives are all disabled. I have
one drive connected to the controller in the Axis 0 port.
Sent from my iPhone
On Jan 27, 2015, at 3:56 PM, [email protected] wrote:
> Did you change your PC's IP address?
>
> VIDEO: How to set your PC's Ethernet IP address
>
http://www.parkermotion.com/dmxreadyv2/faqsmanager/faqsmanager.asp?category=116&knowledgebase=faqman...
>
>
> Default is 192.168.10.40
>
> Is this a new ACR9000?
> If you don't know the IP address and the default doesn't work, you'll
need
> to connect via USB or serial to get the IP address or reset it.
>
> Regards,
>
> Jonathan
>
> ________________________________________________________________________
> Application Engineering Team
> [email protected]
> phone 800-358-9070 · international 1-707-584-7558
> www.parkermotion.com
> Parker Hannifin Corporation · Electromechanical Automation, NA
> 5500 Business Park Drive · Rohnert Park · CA · 94928
>
>
>
>
>
>
>
> Bowlerdusty <[email protected]>
To
>
[email protected]
> 01/27/2015 01:48 PM
cc
>
>
Subject
> ACR9000
>
>
>
>
>
> I am having a little trouble getting a connection between the ACR view
> software and the ACR 9000. I am attempting to use an ethernet cable for
> the connection. Every time I press the "connect" button it says "Failed
> attempting to connect to controller". Do you have any advice?
>
> Thanks,
> Dustin Brown
>
>
>
>
(See attached file: IMG_0864.JPG)(See attached file: IMG_0865.JPG)(See
attached file: IMG_0866.JPG)(See attached file: IMG_0867.JPG)(See attached
file: IMG_0868.JPG)(See attached file: IMG_0869.JPG)
1 Attached Images
Solved!
Go to Solution.
Attachments:
image.jpg ‏938 KB
image.jpg ‏1570 KB
image.jpg ‏767 KB

Hi thanks for the reply. Yes I have used the ACR view to specify which inputs to use before. I used input 0 for the positive limit, input 1 for the negative limit, and input 2 for the home switch. However, when using ACR view the switch kept displaying that the switch had been tripped when nothing was pressing against it. I would also try pressing on the mechanical switch to see at least if the value would change but to no avail.
Attachments:
image1.JPG ‏1642 KB
image3 (1).JPG ‏3768 KB
image2 (1).JPG ‏3247 KB

Windows 7 VM has DNS Problem When Using Wireless

Hello All,
I've been fighting this virtual machine networking problem for over a week now. If anyone has a well-informed suggestion (not a guess) I would appreciate hearing about it.
Here's the problem in a nutshell and then I'll give more details: I'm running Windows 7 Ultimate (64 bit) as my primary (i.e., host) OS. I'm running Windows 7 Home Professional (32 bit) as the guest OS in "Windows Virtual PC" (note that this is *not* the same as "Virtual PC 2007"). If I configure the VM to use my host's wired Ethernet connection, the guest OS can always see the machines on my local network and can always reach the Internet just fine. On the other hand, if I configure the VM to use only my host's wireless connection then the guest OS can still see machines on my local network but CANNOT reach the Internet, except very intermittently (e.g., for maybe 1-2 minutes every hour or so).
I've tried to anticipate the questions you might ask so here is some additional information:
The computer is a Lenovo W500 laptop running Windows 7 Ultimate, 64-bit. The wireless network adapter is an "Intel WiFi Link 5300 AGN".
My Internet connection is via AT&T DSL using a wire2 wireless modem/router.
I have all the updates from Microsoft and Lenovo for this machine. It is 100% up to date with the latest patches and drivers.
I'm running the 64-bit version (or at least I used the 64 bit installer) of "Windows Virtual PC" which I downloaded from this link.
I am *not* running and I did not download "XP Mode".
When the guest OS loses it's connection to the Internet the following message appears in the Windows Event Log:
"Name resolution for the name address.yahoo.com timed out after none of the configured DNS servers responded."
I am able to ping an external machines outside my network but only if I use the IP address. If I specify the host name it cannot be resolved.
ARE YOU GETTING THE IMPRRESSION THIS IS A DNS PROBLEM??? It looks like I do not have access to a DNS when using the host's wireless connection.
On the host OS, the "Virtual PC Network Filter Driver" *IS* installed and selected under my "Wireless Network Connection Properties" settings.
Below are the results of running ipconfig on the guest OS and then the host OS. Note that I am able to ping 192.168.1.254 from the host OS but not from the guest OS. I think this is the crux of the problem.
Here's what I get from an ipconfig /all executed on the guest OS:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Win7_01
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Broadcast
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : gateway.2wire.net
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : gateway.2wire.net
   Description . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)
   Physical Address. . . . . . . . . : 00-03-FF-5A-E5-8C
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::6452:ad20:724a:4d3a%11(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.75(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, May 14, 2010 7:22:30 PM
   Lease Expires . . . . . . . . . . : Friday, May 21, 2010 7:22:30 PM
   Default Gateway . . . . . . . . . : 192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DHCPv6 IAID . . . . . . . . . . . : 234882047
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-79-57-1A-00-03-FF-5A-E5-8C
   DNS Servers . . . . . . . . . . . : 192.168.1.254
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.gateway.2wire.net:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : gateway.2wire.net
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
And here's what I get when I do ipconfig /all on the host OS:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : LEONA
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Broadcast
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : gateway.2wire.net
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . : gateway.2wire.net
   Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN
   Physical Address. . . . . . . . . : 00-21-6A-59-E5-8C
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::94b0:4080:c30f:95da%12(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.78(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, May 14, 2010 6:20:52 PM
   Lease Expires . . . . . . . . . . : Friday, May 21, 2010 6:20:53 PM
   Default Gateway . . . . . . . . . : 192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DHCPv6 IAID . . . . . . . . . . . : 218112362
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-79-34-70-00-22-68-14-2F-CB
   DNS Servers . . . . . . . . . . . : 192.168.1.254
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : gateway.2wire.net
   Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection
   Physical Address. . . . . . . . . : 00-22-68-14-2F-CB
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.gateway.2wire.net:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : gateway.2wire.net
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e74:3ca6:3214:b4fb:72d4(Preferred)
   Link-local IPv6 Address . . . . . : fe80::3ca6:3214:b4fb:72d4%13(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled

Hello,
I am not very familiar wth Microsoft Security Essentials, but believe that it just makes use of the existing Windows Firewall which is present with the operating system.
To me it is odd that the guest OS reports 192.168.1.254 as the IP address for its gateway and DHCP server yet it cannot access them when pinged. Let's try pinging from host to guest (and vice-versa) and see what happens:
From the host OS at 192.168.1.78, try pinging the guest OS at 192.168.1.75.
Then, from the guest OS at 192.168.1.75, trying ping the host OS at 192.168.1.78.
Is each operating system able to ping each other?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Samba mount problem when using Oracle VM Server 2.1

Hello
I´m trying to mount a remote samba share from an Oracle VM Server 2.1 installation.
To be able to do a mount.cifs, I installed samba-client manually using yum.
yum repository based on Enterprise Linux 5 Update 1
In the first step the mount failed with
CIFS VFS: Server requests plain text password but client support disabled
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
After doing an
echo 0x37 > /proc/fs/cifs/SecurityFlags
the plain text password error message is gone.
but
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
still exists.
The mount command looks like that:
mount.cifs //*servername*/*share* /mnt/*localdir* -o sec=none,user=*username*,pass=*password*
The samba server which provides the share, only accept plain text password with no chance to get this adjusted.
Is there anybody who knows how to fix this issue? Help would be really appreciated.

[2008/02/08 14:58:07, 0]
auth/pampass.c:smb_pam_passcheck(810)
smb_pam_passcheck: PAM: smb_pam_auth failed - Rejecting User install !
Which is an indicator that the password is transfered incorrectly.
As the password is for sure correct, it seems to me that the sec=none option is not working correctly when using OVM 2.1.
When using Enterprise Linux 5 Update 1 all is working well.
There you did not even need to use the "echo 0x37"
It works out of the box using sec=none mount option.
That is also a reason why I started this post under Virtualization and not under Linux ;-)
I assume it is a OVM 2.1 specific issue.

Choppy Playback when using the PLAYBACK feature in preferences

I've been running into an issue since the PPro CC 7.1 update in October where Premiere will play footage just fine until you tell it to send a signal out to another monitor. Before hand everyhting played fine in the Program and Playback Monitors. Now whenever switched on it plays back choppy constantly. Doesn't matter the footage format.
To further explain -- I have a 3 monitor setup 2 for editing and a thrid for preview playback. All of this runs via my Retina MacBook Pro and has worked fine since PPro 6.0. Never had any slowdown and its been one of my favorite features in PPro.
So when this update came around I ran into the playback issues mentioned above. So I just keep playback switched off and just leave the third monitor barren... figuring it was a bug (?) I waited and saw a few updates, but nothing that fixed said problem. Though with each update and bug fix I've eagerly gone through the same exercise of trying out this feature once more. Again, nothing has changed... However I found out this evening, that when using my three monitors and suffering through the playback, that I can tell monitor to toggle to full screen and instantly my playback monitor has corrected itself and the two play in perfect sync (quick note the program monitor is choppy when not in full screen mode and trying to playback with the third monitor). I can toggle on and off during this playback and when on its fine, the moment its off, its choppy again. Absolutely bizzare. And to some extent makes my playback monitor somewhat useful agian... albeit in a very tedious fashion.
The point is, I'm at my wits end again here. I've seen plenty of choppy playback post, but nothing quite like this. I've tried to clearing caches, and preferences, even did a unistall/reistall tongiht... and I'm coming up with the same issues in the exact same places. But ultimately I am no closer to finding a proper solution to this particular playback issue. Aside from doing a clean install of the OS and all my software, though I'm not sure its worth it just yet. Even if its my last resort.
Has anyone run across playback as bizzare as this? Did you find a solution? Is there a post I've missed? - Thanks
Specs --
Macbook Retina Mid 2012
16 GB Ram
MacOS10.9.1
Premiere CC 7.2.1 (4)

In the iPhoto preferences set Mail as your email client
LN

Further info needed on the System Time Problem when using Bootcamp

Hi, my query is an extension on the previously reported problems and fix with the Sytem Time being incorrect when using Bootcamp.
As respected user 'SideStepSociety' very helpfully pointed out and posted in another thread, the cure for this problem is as follows:-
In Windows, try this:
Run > RegEdit  
Find: HKEYLOCALMACHINE > SYSTEM > CurrentControlSet > Control > TimeZoneInformation
  Add key ( REG_DWORD type ): RealTimeIsUniversal  
Double-click and set value to 1
However, unless I'm mistaken I have seen somewhere that the key type 'REG_DWORD' is 32-bit based and I am running Windows 7 x64 (64-bit) Bootcamp, therefore do I have to enter the QWORD 64-bit type key i.e. 'REG_QWORD' instead of the DWORD 32-bit type key i.e. 'REG_DWORD', or is it perfectly acceptable and fine to just enter both to cover myself should any of the components revert from 64-bit to-32 bit? ..which I have experienced happening once with Windows 'Gadgets' which normally always runs 64-bit, but once reverted to 32-bit.
Advice appretiated, thanks.

Thanks for advice.
I had gone ahead and entered the DWORD value in the registry just after my post and a couple of week booting between the two OS's, there were no more problems with the time issue between OS X and Bootcamp.
Shame this most frustrating of little problems where not resolved in a Bootcamp update patch, I had been experiencing this problem for a long, long time not knowing how to fix it and thinking it was my own MacBook Pro that was at fault. I do sympathise now with the possible hundreds or even thousands of Mac-Bootcamp users that are suffering this unbeknown that there's only a special registry fix that has to be manually applied to cure the problem. This is Tacky. I do wonder about Apple sometimes.

Hello. I have windows xp. When using Firefox as my home page, I get awful screen interference of lines verticle and horizontal. When I switch to Internet Explorer I don't get them. I want to keep Firefox as server.

Hello. I have windows xp. When using Firefox as my home page, I get awful screen interference of lines verticle and horizontal. When I switch to Internet Explorer I don't get them. I want to keep Firefox as server.

Here is something that you can try:
# Click on Tools and then click Options.
# Select the Advanced panel
# Select the General tab
# Uncheck Use hardware acceleration where available.
# Click File and then click Exit.
# Start Firefox normally.
Once you have followed those steps, you'll want to follow these as well and see if the lines are gone.
Click the Help menu and select Restart with Add-ons Disabled.
Let me know if this has eliminated the problem.

IPV4 gone when using Hyper-v

Similar Messages

Maybe you are looking for