IPV6 connectivity - no network access Windows 8.1

, new laptop just got it today, not sure what this is, I can get online but it's slow, I have been trying to fix this for the past 3 hours, help please, I am not tech savy.

Hi DawnAngelique,
In addition to carey , please check your LAN connection and network state .
If the issue persists I would suggest you to update driver for your network adapter then check the result .
Please feel free to let us know the further progress .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Thunderbolt network access Windows network

First, let me admit that I am brand new to the Mac. I have the new Retina Macbook Pro and like it, but am having real network connectivity problems.
First, when connected through wireless, it is unreliable in resolving Windows host names. For example, I have a server Media, at 192.168.1.229. I try to SMB connect or, more often, Remote Desktop (RDP) connect and it always works through the IP address but is 50/50 through the name.
Second, when I connect with the Thunderbolt Ethernet adapter, it NEVER finds the Windows servers, even by IP address. Internet connectivity is fine, so it is connecting to the network. I unplug the Thunderbolt Ethernet adapter, and I'm back to (1) above.
Third, I'm running the latest version of Parallels with Windows 7. It experiences the same issues (1) and (2) above.
I've searched the 'net and the forum, but unsuccesfully.
This is keeping me from loving my new Mac. Like it, don't love it.

Hi DawnAngelique,
In addition to carey , please check your LAN connection and network state .
If the issue persists I would suggest you to update driver for your network adapter then check the result .
Please feel free to let us know the further progress .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My Airport does not connect to network from Windows laptop, but guest network does connect to internet

I set up my new Airport Extreme and can connect to the network with any IOS device (iPod Touch, iPhone or iPad). When attempting to connect to network with my work laptop (Windows 7), I get an error that it cannot connect. I have no problem connecting to the Guest Network on this laptop. Unfortunately, no network connection.
I have Cox Communication Internet through there Motorola SURFBoard Cable Modem Model No. SB5101U.

Hey there shriya bhardwaj!
I have an article for you that will help you troubleshoot this Wi-Fi issue on your computer:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Msiexec + network access = windows hang

We have faced application installation problems with windows 7 enterprise sp1/IE8 while running an installation sequence containing some windows installer based silent uninstallations and installations.
Sometimes windows stops responding during installation sequence.
Installed application packages are pretty simple like python msi - package.
Active open application may continue after crash to work for a while. Mouse cursor keeps working. Screen saver gets activated normally. But this is not just a windows explorer crash, control-alt-del
do not work and open task manager window freezes.
Processes like windows installer keep running because some timeout related error messages may appear after waiting a longer time without hard reset.
System and Application logs look pretty normal. No crashes, but system is either extremely slow or lost some functionality completely.
If installation sequence works fine but you start internet explorer before booting after latest MSI - based installation, same symptoms appear.
This can be repeated using different kind of hardware and even at virtual environment with frequency about 10 - 20 % of installations, however starting IE after installations before reboot seems
to freeze the system always.
When installing without network there is no problem except that you can freeze the computer with IE even without network connection.
Any idea what kind of network related issue could cause such a problem ? Not a network driver issue I suppose because this is repeatable in different windows installations. Windows installer
based uninstallations/installations together with http - connections seems to trigger the problem.
There are some http - based activity during installation if the network connection exists. Putting windows installer packages to a network share or keeping them locally do not change the situation,
key to the problem might be those sent http - based installation messages. It's hard to understand how the whole system gets randomly unresponsive during this kind of basic activities.

Hi，
So from your description, IE and msiexec +network make Windows no responding.
In order to eliminate some software\device driver conflicts, I suggest you test this issue in cleanboot mode and safemode with networking, and see if issue persists, you can refer to these links
http://support.microsoft.com/kb/929135
http://windows.microsoft.com/en-in/windows/advanced-startup-options-including-safe-mode#1TC=windows-7
if you have some add-ons installed in IE, disable them, test issue again, some "bad" add-ons can take over high CPU\memory and make windows no response. (Tools\Manage add-ons), meanwhile, delete IE browser\temporary files
Make sure that there's no other pending installation in your system such as software or updates.
Yolanda Zhu
TechNet Community Support

Connecting wirelessly to access windows shared network printer

Hi there:
New macbook computer. HP 2605dn laser printer. I've connected to the windows network using lpd and other protocols, and everything seems to be going smoothly. The printer shows up on my screen. I push print. It says it's printing. But nothing happens at the printer. The message I receive is that the printer is busy and it will retry in 30 seconds. Of course, nothing happens. I've installed the hp suite directly into my machine, all 500 mb of it. Nothing. Not sure what to do. Try resetting the server? I can ask our IT guy (not an expert by any means) to reset it in the morning and try that. Anything else? Thanks!

Problem solved. IP address was incorrect. I thought I had tried that before. Oh, well. Perhaps a combination of new downloaded driver and correct IP address. The good news is that it's quite easy to log onto a windows network with your mac and print from the windows printer. As long as you dot your i's and cross your t's.

Can't connect to network in windows, my other laptop can, why?

Hey there, I have a problem.
There is a particular router that when I use with my Asus A3F windows laptop, I connect normally. So do the other 3 laptops in the house. However, when I'm on my Mac in windows it never connects no matter what.
What's the problem here? What's so different they are both windows. I have Bootcamp 2.1 drivers. Do I need to update anything or change anything?
PS : it's windows XP

Quick note : my windows connects to all the other networks I tried except this one. While all the laptops that ever used this router worked normally except my bootcamp windows

Multiple connection slows network access

I have a AP1252AG with a 5Ghz and a 2.4Ghz radio installed on it.
It is connected to a Gig port on my Cisco 3750.
The Dell Vostro 1720 has a 802.11n wireless adapter.
I go the the 1252 configured to run 802.11n per a cisco document I got off the internet.
I can connect with one laptop at 300Mbps and then drop down to 81Mbps and then back up to 300Mbps again.
When I bring in multiple same type laptops my response time drops to and the application they are running comes to a crawl
They are all running an application that is on a local server attached via gig port on a cisco 6509.
We had planned on having up to 10 laptops using this single 1252. Is that expecting to much through put capablility to support.
Is there 1252 radio configuration setting that will provide the best throught put for 802.11n connection?
Is there a 3750 gig port configuration that would provided the best thought put with a WAP attached.
Thanks
Ken

I have done further research into my problem by reading other discussions with my same problem.
I am now able to connect at 130Mbps max with my Dell Vostro. In the other discussions they talk
about setting the default Guard Interval from 800NS to short 400NS to get to 144 Mbps and then set
the 5Ghz radio to double width channel to ge 40Mhz channels to get 300Mbps. How can I do this
with a 1252 stand-alone using gui interface configuration. If there is only command line configuration
to do this, what is that?
Thanks
Ken

A solution to no network access in guest OS

Hi.
Host OS: Windows Server 2008 R2 / Hyper-V
Guest OS: Windows Server 2008 R2
Had a problem with "no network access" in guest OS.
However, as many others could not get rid of the Virtual Network card in Device Manager (which also seems to manage the LAN Connection object under Network and Sharing Center > Change Adapter Settings)
After a few hours this seems something like what you need to do to get rid of the faulting Microsoft Virtual Machine Bus Network Adapter ... so the Guest OS can automatically reinstall it. These steps worked for me:
Probable Prerequisites:
0)
- The host OS runs the Virtual Network Switch on one of the physical network adapters or on the same adapter (if there is only one). In my case I run on the 2nd physical adapter.
- Hyper-V Virtual Network manager has a virtual network on one of those adapters.
- The VM with the guest OS is bound to the virtual network
1) Event log > System probably has an event saying something is wrong with the Microsoft Virtual Machine Bus Network Adapter and you need to reinstall it (but how!!!)
Fix Guest OS LAN Connection:
1.a) Hyper-V Manager Actions:
Hyper-V Manager > Shutdown or turn off the Guest OS in
Hyper-V Manager > VM Guest OS > Settings > Network Adapter remove
1.b) Hyper-V Manager VM GUest OS States:
{ No network adapter available for guest OS }
2.a) Hyper-V Manager Actions:
Hyper-V Manager > VM > Start VM Guest OS
2.b) Guest OS States:
{ DM > Virutal network card and Network and Sharing Center > Connection LAN is strangely still available even though the virtual network adapter hardware was removed in step 1 }
3.a) Guest OS Actions:
Go to Network and Sharing Center > Change Adapter Settings > "LAN Connection" object > Properties
Click every protocol etc. and click the uninstall button
3.b) Guest OS States:
{ The LAN Connection object is gone under Network and Sharing Center }
{ The Network card is gone under Computer Administration > Device Manager }
4.a) Guest OS Actions:
cmd > Run as Administrator >
set devmgr_show_nonpresent_devices=1
devmgmt
In device manager goto the network node and uninstall all references to Microsoft Virtual Machine Bus Network Adapter
(In my case I used the guest os for a Windows Backup sysrecovery because of changes in the disk layout thus I also had some additional references now visible to the previous physical network adapters and uninstalled them as well)
4.b) Guest OS states:
{ Device Manager > Microsoft Virtual Machine Bus Network Adapter not present }
5.a) Hyper-V Manager Actions
Shutdown VM Guest OS
VM Guest OS > Settings > Add Virtual network adapter for external network
Start VM Guest OS
5.b) Guest OS States:
{ Guest OS ready for plug and play installation of Microsoft Virtual Machine Bus Network Adapter }
{ Device Manager > Network Adapters > Microsoft Virtual Machine Bus Network Adapter is installed and activated }
{ Network and Sharing Center > Connection LAN object is installed and activated }
{ LAN is connected with network access through the Virtual Network switch in the Host OS }

Thank you for the post. After searching for weeks on end and trying all kinds of solutions, I was finally able to resolve the issue by removing the "Microsoft Virtual Machine Bus" from the Guest machine on Hyper-V.
No matter what change I was applying I kept getting the "169" based IP.
My host system is "Windows 8.1 Pro" with Hyper-V role enabled and my guest machine is "Windows 8 Enterprise". I was starting to question if it's the enterprise machine that may be an issue, but glad this is resolved.
Thank you for the solution.

Bluetooth network access not happening

i have a 845e max2 blr
p4@ 2.4 ghz 533fsb
256 mb kingson ddr
10gbhdd
intel pro ve 100/10
matrox mga 400 16mb
win98 se
Other is acerpower 4300
celeron @400Mhz
ram 32 mb6.4 gb hdd
win98 se
sis chipset 7001
(it is the the node which is conneted to my network using static ip system using a physical nic with tcp/ip as well as netbios)
i have setup the blue tooth application ver 1.2.4 on my two pcs win 98 se.
following instructions of bluetooth guide i installed transrecieving key in Acer system, also i installed winroute lite configured it as per guide & also configured the blue tooth server adapter @192.168.1.1 in network properties & subnet @255.255.255.0.
I have instaleld bluetooth bracket & antenna & set up that MSI board based system as client.
both the pcs are able to discover eachother
all the services are running by automatic means .
I attempt to connect using network access using my msi based system. evey time i get the same response that :connection could not be completed or error connecting to (the name of other computer)
i have disabled all the authentication authorisation & encryption at all levels.
transmit power is : high
also i enabled acces using dial up server window on server pc using transrecieving key i made it allow called access s & also disabled require encrypted password & made the server type as ppp windows 98 server.
after that i did it viceversa i.e i made the msi based based board the server pc & acer system aas client still afer initiating & discovering the services i try to connect & get the same error messages.
I am in complete mess.
please help!!

Depend the model of your Mac doesn't work, I have iPhone 6 iMac mid 2011 and MacPro 2012 and doesn't work, the problem is the version of Bluetooth, you must have a Mac from mid 2012 or version bluetooth 4.0

HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)

My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable. I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99% installed on the progress bar and sits there until it times out. I suspect one of the follow but am open to other ideas from those more knowledgeable:
1. Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
2. Could my WPA WPA2 PSK AES encrytion be messing it up? Are the modern firmware and updates designed to accept these ? I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase. What to do if so?
3. Could Church Lady be correct and that it is Satan preventing the installation? If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?

Hi @Marvalina1968,
Welcome to the HP Forums!
I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
First to answer your questions:
It is possible the printer could be locked to an old configuration and needs to be reset.
I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
Your Norton antivirus, could possible be causing the installation to fail.
Please take a look through the following guides:
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
Printer Does Not Maintain Wireless Connection.
If the guides do not resolve the issue, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Disable antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Re-install the software. HP LaserJet Full Feature Software and Driver.
Hope this solves your problem, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cisco vpn 5.0.07.0440-k9 connected but not access remote network from Windows 8.1 pro

I am using Cisco vpn 5.0.07.0440-k9 and Cisco vpn 5.0.07.0290-k9 both version on our windows 8.1 pro laptop.
VPN successfully connected but not access remote network and not getting ping.
But when i am try through wifi then vpn good work.
Please help me as soon as possible.
Thanks
Sanjib

Hello Karthik,
I am using "MTS usb wifi" device and connect vpn through wifi Its working good the same win8.1 pro. But when i am try to connect VPN through LAN/Wired or USB modem (Like: Vodafone,MTS and others) its not working.
I am using Easy vpn on Cisco RV325 router in our office. Same VPN client is very good working in Windows 7 SP1 and Windows XP SP3.
Thanks
Sanjib

RemoteApps Error "Your connection was denied because of a Network Access Policy (TS_NAP). Please contact your server administrator."

Hello All,
Good day. May I ask if anyone experienced this error when trying to access remoteapps in Azure? We are using IaaS and set-up RDS using Windows 2012 R2 but we are getting an error below.
"Your connection was denied because of a Network Access Policy (TS_NAP). Please contact your server administrator.
Various roles and services (Broker, Session Host, RD Gateway and Web Access are installed on each VMs).
Please advise.
Thanks,
Glenn

Hi Glen;
Looks like the set up was not done correctly. Please follow the guidelines given on this
blog by Keith Mayer.
Regards;
Prasant

Attempting to connect my MacBook to my 4s iPhone. I have had them connected in the past to use the "hand off" function. Today it tells me "network unavailable" make sure network access is enabled. I don't know what to do.

Attempting to connect my MacBook to my 4s iPhone. I have had them connected in the past to use the "hands off" function. Today it tells me "network unavailable" make sure network access is enabled. I don't know what to do. I love the hands off feature as my iPhone is never with me when on my mac! I'm not sure what to do. Both are "discoverable" via bluetooth and show up on each device but when I try to connect it says "network unavailable". HELP!

An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

2008 R2 printer server, cannot connect to printer, access denied, Windows 7 OS only

Deployed new Windows 2008 R2 domain controller, added print and document controll. Added several network printers on R2 server. We currently have mostly Vista biz clients but half a dozen W7Pro clients also. The Vista clients connect to these new network
printers, no problem but none of the W7 clients will connect. I select the printer from the drop down directory list and select to load the drivers, the system starts loading drivers and then right before it finishes it stops with error message, "Windows cannot
connect to the printer. Access denied. Again, this happens only with the W7 clients on our domain, Vista works fine.

By default, the security settings for Windows 7 and Server 2008 R2 allow users who are not members of the local
Administrators group to install only trustworthy printer drivers, such as those provided with Windows or in digitally signed printer-driver packages. You may want to install printer-driver packages on the print server
or in the clients. More details can be found this page: Cannot
connect to printer, Access denied -
http://www.chicagotech.net/server/print3.htm
Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

[SOLVED] DBus error when accessing "Windows Network"

I'm getting an error when trying to access "Windows Network" from Nautilus after last Gnome (2.22 -> 2.24) update:
Unable to mount location
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
Please tell me if you need me to post any more info/logs.
Thanks in advance
Last edited by DingoMD (2008-10-22 08:07:36)

Are those with a problem using share level security on the samba server?
Have you tried accessing the share using smbclient? (smbclient //server/share)
I have been receiving the original dbus error for some time now.
I am using share level security on the server.
Using smbclient results in a segfault. Using nautilus also results in an error from libsmbclient which can be seen in one of the log files.
[mythtv@tvee ~]$ smbclient //sirschmoopy/shared
Enter mythtv's password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.1]
Server not using user level security and no password supplied.
Segmentation fault
There is a samba bug which looks similar but it only affects people with ipv6 disabled. I have disabled and enabled ipv6 several times and the errors persist.
I think it may be related to this bug: https://bugzilla.samba.org/show_bug.cgi?id=7250
I haven't tried the patch provided yet.

IPV6 connectivity - no network access Windows 8.1

Similar Messages

Maybe you are looking for