IPv6 does not work (MacMini late 2014)

Hello,
recently I bought an new MacMini late 2014 to use this machine as an OpenDirectory server to service request from our file servers and other boxes. Therefore this computer is configured with static ip addresses (v4, v6) within a separate server vlan. Nothing special, other machines (FreeBSD, OSX 10.9) within this segment are working well. The native en0 interface has the two server-lan addresses (v4, v6), an additional vlan interface of en0 is differently configured (v4; v6 only link local. All other initially active network interfaces are deactivated (thunderbold-bridge, bluetooth, WiFi etc.), because they are of no use.
Because of the machine's job as a server, I deactivated all temporary ipv6 address games (sysctl).
This standard configuration simply does not work as intended:
IPv4: communications to servers in the same lan segment are possible, the firewall is reachable, outside connections can be established.
IPv6: HORROR!
Different reactions between "no route to host" (hey, read your kernel tables and use the routes!) and timeouts (it read the kernel routing table, but failed with nd). The ping (ping6) targets are in this first step of testing machines within the same lan segment. Ping-ing of non-local, existing link local addresses is not possible. The MacMini sees itself but nothing more.
All firewalls (via GUI) are turned off, the computer is rebooted again and again. I checked sysctl for mess with packet filters and found an entry for an activation of an ipv6 fw (firewall?!), which I deactivated -- without success.
Software: 10.10 (delivery) plus update to 10.10.1; Apps: OSX Server.
Has anyone ideas what to check further (beside of using a network sniffer)?
Wolfgang

I have a mid-2010 Macmini running 10.10.3 with similar IPv6 symptoms. Not picking up a global address from RA, can't ping6 other link-local addresses, IPv4 working fine. Driving me crazy!

Similar Messages

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

DB Restore does not work on MSSMS 2014 under WIndows8.1

When attempting to restore a DB which was backed up on a different machine (same names but SQL EXPRESS 2012) under MS 2014 running on WIndows 8.1 into a SQL Express DB, the following happens:
1. Open Restore task
2. Select Device to get 'Select backup devices"
3. Invoke "Add" and expect to see a browser. Instead, a backup file location is indicated and no browsing is permitted in the "Locate Backup File" Even when the path and file names are just typed in, the Restore will not work.
Any help is appreciated.

Hi,
SQL Server does not allow you to restore or attach a database from a higher version of SQL Server to a lower version of SQL Server in your case from SQL 2014 to SQlL 2012, however you can generate script in SQL 2014 and execute it on SQL 2012.
How to migrate a SQL Server database to a lower version
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

Creative Cloud Application does not install on late 2014 Retina iMac.

I am already user of PS CC 2014 and LR for about a year. Until now this worked flawlessly on a different Mac. After migration to new machine Creative Cloud app stopped working (actually this was the ONLY app that did not work after migration, one of about 100 others). I uninstalled all CC products and attempted a clean install from administrative account, i.e. install from freshly downloaded Creative Cloud installer from Adobe web site failed. Relevant diagnostic report (top part) attached below.
Need help immediately.
Process:               Creative Cloud [460]
Path:                  /Applications/Utilities/Adobe Creative Cloud/*/Creative Cloud.app/Contents/MacOS/Creative Cloud
Identifier:            com.adobe.acc.AdobeCreativeCloud
Version:               1.8.1.451 (???)
Code Type:             X86 (Native)
Parent Process:        ??? [1]
Responsible:           Creative Cloud [460]
User ID:               501
Date/Time:             2014-12-18 10:54:01.390 -0800
OS Version:            Mac OS X 10.10.1 (14B25)
Report Version:        11
Anonymous UUID:        CFB00717-0E16-24C4-DDFA-4ED1092A0117
Time Awake Since Boot: 100 seconds
Crashed Thread:        0 CrBrowserMain Dispatch queue: com.apple.main-thread
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000027d1e35c
VM Regions Near 0x27d1e35c:
    mapped file            000000000d00c000-000000000d2f9000 [ 2996K] rw-/rwx SM=COW /private/var/folders/*/*.csstore
-->
    MALLOC_TINY            000000007be00000-000000007c000000 [ 2048K] rw-/rwx SM=COW
Application Specific Information:
objc_msgSend() selector name: release
Thread 0 Crashed:: CrBrowserMain Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib               0x962b20a7 objc_msgSend + 23
1   com.apple.CoreFoundation       0x90b9089f _CFAutoreleasePoolPop + 47
2   com.apple.AppKit               0x97989180 -[NSApplication finishLaunching] + 745
3   com.apple.AppKit               0x97988ab0 -[NSApplication run] + 143
4   libcef.dylib                   0x04603e17 0x43f9000 + 2141719
5   libcef.dylib                   0x0460361c 0x43f9000 + 2139676
6   libcef.dylib                   0x046376f8 0x43f9000 + 2352888
7   libcef.dylib                   0x0465011e 0x43f9000 + 2453790
8   libcef.dylib                   0x04636d6a 0x43f9000 + 2350442
9   libcef.dylib                   0x0447022f 0x43f9000 + 487983
10 HEX.dylib                     0x0437ec2a HEXMessageProcessor::runLoop(std::string const&) + 378
11 HEX.dylib                     0x043517e8 0x434f000 + 10216
12 HEX.dylib                     0x0438661d HEXMessageProcessor::processMessage(std::string const&, std::string const&, ProcessMessageOutput&, MessageObject const&) + 77
13 HEX.dylib                     0x0434feaf processMessage + 175
14 NXGCore.dylib                 0x00275c30 ExternalGateway::sendMessageToApplet(MessageObject const&, MessageStruct const*, bool (**)(void const*), char const**) + 896
15 NXGCore.dylib                 0x00275753 ExternalGateway::handleMessage(MessageObject const&, MessageStruct const*, bool (**)(void const*), char const**) + 435
16 NXGCore.dylib                 0x0027636e ExternalGateway::processMessageFromOutside(MessageStruct const*, bool (**)(void const*)) + 302
17 com.adobe.acc.AdobeCreativeCloud 0x000b04b5 start + 20085
18 com.adobe.acc.AdobeCreativeCloud 0x000b44d5 start + 36501
19 com.adobe.acc.AdobeCreativeCloud 0x000ac9d9 start + 5017
20 com.adobe.acc.AdobeCreativeCloud 0x000ab98a start + 842
21 com.adobe.acc.AdobeCreativeCloud 0x000b096e start + 21294
22 com.adobe.acc.AdobeCreativeCloud 0x000ab675 start + 53

Jeff,
thanks for the suggestion. I see your point, I actually tried to use uninstallers, but PS CC 2014 uninstaller throws off an error (not specific, unfortunately). I think I try to do a complete erase, followed by clean installation of Mac OS X, followed by manual re-installation of my apps and will just move my docs from full backup I made before migration.
Any idea what actually may have caused the problem? What I see is CC app installer going through initialization, then it is downloading something for a short time then it just disappears. Greyed out icon of CC app briefly appears in menubar then it is gone. All Adobe crash logs as well as diagnostic logs generated during this time are not that informative. Looks like a few of the threads crash very soon after initialization…
thanks again for the time you took to answer
Jacek

Adobe Paper Textures Pro does not work on CC 2014 ?

Extension Manager CC was updated. Paper Textures Add-On did not show on Manager. Tried to remove the add-on by deleting it. Got error message that it could not be deleted. Read that Flash-Panels are no longer available on CC2014, does this include the Dr.Brown Papiertextures?

Hello,
something like this is discussed there: https://forums.adobe.com/thread/1504740
MTH
Hans-Günter

Firefox does not work after update to 3.6.6 (and all later revisions)

(EDIT: I found the exact revision from which the Firefox is not starting, it is 3.6.6 so I changed them throughout this post, previous revision value was 3.6.8)
I am using Windows 7 x64
After Firefox recently updated to 3.6.6 it does not work any more. The application is listed in task manager but it does not do anything. There is no user interface or anything. Only way to interact with it is "End process". Starting in safe mode or starting Profile manager is not possible.
I tried all possible and suggested solutions in mozilla KB, this and other forums but without success (windows safe mode, firefox safe mode, renaming firefox, waiting, checking for firewall or malware/virus issues, deleting profile, uninstall, clean reinstall and every possible combination of those that I could think of). Always the same result, no error message, firefox shown in task manager and that's it.
When I do clean install of all later firefox revisions starting from 3.6.6 the problem remains, including latest Firefox 4 beta6.
I have no issues with any firefox versions on my Vista laptop, so I would guess that something in my windows environment is not suitable for newer versions of firefox.
As I cannot find official older 3.6.x revision of Firefox, I am currently using 3.5.13 and it works flawlessly.
Any help is appreciated, I ran out of ideas.

You can try a direct connection and select No Proxy in the connection settings.
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"
Also do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

HT1694 I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

bump? Is bumping allowed? Lol.
I just really need some help here.

Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014.

in Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014. At first I didn't even see the option but I reinstalled Photoshop CC and now I see the menu option but when I try it there is a message that I need to use Photoshop CC. So I open Photoshop CC and the same thing happens? I can't seem to make it work.

Kitty,
Your screen shot is in the virus scanning queue, where it can linger for minutes, hours, days or weeks.
If you use the camera icon in the reply editor's formatting bar, you can embed your image in your post, where it will be viewable instantly.
then:
As for your issue, make sure all applicable scripts are checked in Bridge preferences:

Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.

Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.

Thanks for your quick reply. I tried a number of different values. Usually when I do a negative offset they're very small values, like -.25 or -.5.
An Update- I took the art work into Ai CS 6 and It still did not work, which is really strange. And I've used it hundreds of times with success in the past. Also I tried it with live type and outlines, ungrouped, un-compounded still could not get it to negative offset.
Thanks for the help.

I installed photoshop cc 2014, but Camera Raw remains on Version 8.0. Update to 8.5 does not work.

I installed photoshop cc 2014, but Camera Raw remains on Version 8.0. Update to 8.5 does not work.

Solved in this way:
Close Photoshop first, then:
Download the 8.5 manual update link from here: Don't run the installer, but instead just Open the zip file in Windows Explorer.
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw8-8.0/8.5.50/setup.zip
Navigate inside the zip file to find the resources inside that correspond to the 64 or 32 bit Photoshop version that you're running. I assume you have installed the 64 bit version, so the rest of the instructions will concentrate on the 64 bit Camera Raw.8bi only. Here's the path:
setup.zip \ payloads \ AdobeCameraRaw8.0All-x64-050614143245 \ Assets1_1.zip
The file within Assets1_1.zip, named 1002, is actually the Camera Raw.8bi file for 64 bits, just with a different name.
Copy 1002 to your folder on your computer where your Camera Raw.8bi normally lives, e.g.,
C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats
Rename the old Camera Raw.8bi file to Camera Raw.8bi_8.0. It's important that the extension is changed to something other than .8bi.
Rename 1002 to Camera Raw.8bi
Run Photoshop and verify the Camera Raw version by choosing Help - About Plug-in... - Camera Raw.
Thank you so much!

I called Verizon prior to travelling abroad and asked to turn roaming on. As of today, 4 days later, I have no service. I do not have a landline to call. GlobalServices email does not work... Does anybody know how to reach customer support via email?

I called Verizon prior to travelling abroad and asked to turn roaming on. As of today, 4 days later, I have no service. I do not have a landline to call support. GlobalServices email does not work... Does anybody know how to reach customer support via email?

Hi Florence2014
I'm so sorry your having issues. Unfortunately there isn't an email for global support. The only way way to reach them while traveling is to call them at 908-559-4899.
JoeL_VZW
Follow us on Twitter @VZWSupport

I downloaded CC 2014 and now my image proseccer on 2 computers does not work on either

I downloaded CC 2014 and now my image proseccer on 2 computers does not work on either

You may try these options:
Credit Kappy.
Ciao.

Two finger scrolling does not work on my MacBook (late 2008)

Two finger scrolling does not work on my MacBook (late 2008) with either the notebook trackpad or a b/t conected magic trackpad. Yes, I've set system preferences. Suspect a driver or s/w problem. Ideas?

Saw another post that hinted that you need to go to accessibility settings:
System Preferences > UniversalAccess > Mouse & Trackpad > Trackpad Options
Enable scrolling (and I enabled dragging while I was at it and it worked. Looks like wierd things can get set even if you don't mean it to.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379

IPv6 does not work (MacMini late 2014)

Similar Messages

Maybe you are looking for