IPV6 issues during the installation? "error: failed retrieving file"

Hi!
I currently try to install Arch on my Notebook using the Newbie Guide from the German Arch Wiki. Everything seemed to work fine until I got to the point of installing the base system using
pacstrap /mnt base base-devel wpa_supplicant
. The downloading process fails and returns about the same error message for every mirror:
error: failed retrieving file 'core.db' from MIRRORNAME : Resolving timed out after XY milliseconds
I already tried to use different mirrors, but none of them worked. I tried to reach them on another machine via the browser and could access them, so they're definitly up. It therefore could be my internet connection, but I'm connected via an ethernet cable and can ping e.g. google.com or archlinux.org without any problems. I looked up the issue on different forums and almost everyone said that it's an issue caused by ipv6; I tried different workarounds, but none of them worked since most of them were used on an Arch system that was already installed but had problems with pacman. Due to the fact that I'm encountering this problem on a CD that I try to install Arch with, most of the files I'm supposed to edit to disable ipv6 aren't there (yet?) - and the other workarounds just didn't work. I really want to install Arch on my system, but can't continue with the installation when pacman can't reach the mirrors.
I therefore need your help to solve this; like I said, it's probably an issue with ipv6, but I just can't find out how to disable it on my installation medium (I burned the archlinux-2014.11.01-dual.iso on it, if that matters).
Last edited by Nex (2014-11-15 15:05:06)

run ping6 -c 4 google.com and post the output.
alss post the output of :
ip addr
ip route -4
ip route -6
Last edited by Lone_Wolf (2014-11-15 16:37:13)

Similar Messages

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Pacman - error: failed retrieving file

Hi.
I just installed Arch on my new laptop but when I first got to the stage where you need to use pacman for the first time, I got this error:
error: failed retrieving file
for all the mirrors I have uncommented in my /etc/pacman.d/mirrorlist with reasons like "Not found", "File unavailable" or "Service not available".
I've tried several mirrors (all french mirrors and some others) but I got the feeling that it's more coming from my computer.
I first got this error when I tried to install Xorg, but it's the same when I try with someting else (I tried Firefox for instance). Some packages are downloaded but some aren't and so, I can't install anything.
I've checked my internet connexion which seems to work since I have 0% loss when I ping something.
I've also tried pacman -Syy but it didn't fix it.
So, I'm asking for your help, since I never had any problem at this stage of the installation before.
And by the way, I'm running on a VAIO laptop with Arch x86_64 installed via network an I used DHCP during the install.
Thanks

I don't think so, since I added nothing after installing. Unless there is a firewall in the hardware (I don't know anything about that). My computer is a Vaio VGN-SR and this morning, I was able to install both cpudyn and acpid on the first try.
And I installed Arch before with the same internet connexion and there was no problem so it must be the computer.

Intermittent pacman errors failed retrieving file

I got most of the way through the Beginners' Guide, but at the part where it has me upgrade the system using pacman I run into trouble. It can't always download the packages. Sometimes it works fine, but many of them return errors before they finish downloading. I always says some variation of "error: failed retrieving file '<filename>' from <mirror> : <reason>" Then it will attempt to finish downloading from another mirror. At the end of the whole thing it says that errors occurred and no packages were upgraded. It doesn't seem to matter what I put in mirrorlist. I've tried the rankmirrors script, Reflector, and picking some that look good from the mirror status page. I can ping the mirrors, so I know that works. my host name is the same in /etc/hosts and /etc/rc.conf. I've looked through the wiki and the forum and haven't found anything that works. I might have missed something, but I've been working on it all day.
If you need me to post any more information let me know.
Thanks,
ProNate

itsbrad212 wrote:
Sometimes, refreshing the mirrors with:
pacman -Sy
may resolve some of those errors.
EDIT: Scratch that above suggestion. You could possibly try using one trusted mirror (as stated below). For me, http://archlinux.unixheads.org seems to work quite well, so maybe use that.
I'd recommended only having one selected mirror in /etc/pacman.d/mirrorlist. Although that is most likely unrelated to the issue at hand.
If I just use that mirror it fails to synchronize any databases.

Error: failed retrieving file

everytime I try to download a file from pacman or yaourt, I get this:
error: failed retrieving file 'whateverfileimdownloading.tar.gz' from mirrors.gigenet.com : Not Found
I'm trying to install mathmap in gimp 2.6, but I this happens and mathmap doesn't seem to install:
:: Retrieving packages from extra...
error: failed retrieving file 'gtksourceview-1.8.5-3-i686.pkg.tar.gz' from mirrors.gigenet.com : Not Found
gtksourceview-1.8.5... 553.3K 985.9K/s 00:00:01 [#####################] 100%
:: Retrieving packages from community...
error: failed retrieving file 'gimp-mathmap-1.2.4-4.pkg.tar.gz' from mirrors.gigenet.com : Not Found
gimp-mathmap-1.2.4-4 221.4K 788.9K/s 00:00:00 [#####################] 100%
checking package integrity...
(2/2) checking for file conflicts [#####################] 100%
(1/2) installing gtksourceview [#####################] 100%
(2/2) installing gimp-mathmap [#####################] 100%
/sbin/ldconfig: file /opt/qt/lib/libqt-mt.so.3.3.8 is truncated
/sbin/ldconfig: file /opt/qt/lib/libqt-mt.so is truncated
/sbin/ldconfig: file /opt/qt/lib/libqt-mt.so.3 is truncated
/sbin/ldconfig: file /opt/qt/lib/libqt-mt.so.3.3 is truncated

I think, you should change the server
(open the file /etc/pacman.d/mirrorlist with i.e. nano and put # infront of Server = http://mirrors.gigenet.com/archlinux/$repo/os/i686 and remove the # infront of another server)
On http://mirrors.gigenet.com/, there is no (more?) a directory for arch.
Last edited by ZaQ (2010-01-18 18:47:08)

[SOLVED] Pacman error: failed retrieving file : No address record

I just installed Arch on a x86 laptop using the cd as the package source. I wanted to do a net install, but when I attempted to (regardless of the mirror) I got many responses from pacman in tty7 of "No address record". This happened despite having a network connection and being able to ping any site from the cli.
After installing, I am still having the same problem. The laptop is plugged in via ethernet, and I can ping any site I want, but a call to pacman -Syyu just returns numerous errors such as
error: failed retrieving file 'core.db' from mirror.rit.edu : No address record
And just as a test, I was getting replies when pinging mirror.rit.edu.
Last edited by process91 (2011-11-18 18:21:17)

Try the following steps:
1 - Set the VirtualBox Networking option to NAT
2 - Start the arch machine in the VirtualBox
3 - Edit /etc/rc.conf as a dynamic IP:
HOSTNAME="arch"
interface=eth0
address=
netmask=
broadcast=
gateway=
4 - Run dhcpcd
5 - Try to ping a couple of sites, or your router
If you still can't ping or anything, I suggest you start a new thread specifically about your problem. Include the output from "ipconfig -a". You're not going to get much help from posting in a thread marked "[SOLVED]".
Last edited by process91 (2012-01-18 07:21:14)

Cannot sync pacman; error: failed retrieving file, No address record

Hello,
As a heads up, I'm trying not to repost
I've searched the forums but found nothing, I'll keep looking. I've read the front page news about the mirrorlist and tried using the old mirrorlist file. I've been on #archlinux on IRC. Nothing yet.
Here is an example of what I see:
root@dungeon pacman.d # pacman -Sy
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : No address record
error: failed to update core (No address record)
error: failed retrieving file 'extra.db.tar.gz' from ftp.archlinux.org : No address record
error: failed to update extra (No address record)
error: failed retrieving file 'community.db.tar.gz' from ftp.archlinux.org : No address record
error: failed to update community (No address record)
error: failed to synchronize any databases
I've commented out all but one of the servers in the mirrorlost file to shorten the output.
Any ideas?

Snowman wrote:You are trying to fetch non-official dbs which are not on the Arch Linux mirrors. Are you using Chakra? Post your pacman.conf
no I am using normal Arch, and it was working fine until i updated on tuseday. I am using "yaourt -Syu --aur" to update.
My actual pacman.conf is (changed automaticly to this within unsuccesfull update yesterday):
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
[core-testing]
Include = /etc/pacman.d/mirrorlist
[desktop]
Include = /etc/pacman.d/mirrorlist
#[desktop-testing]
#Include = /etc/pacman.d/mirrorlist
[platform-testing]
Include = /etc/pacman.d/mirrorlist
[apps]
Include = /etc/pacman.d/mirrorlist
#[apps-testing]
#Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
NOW I tried the saved pacman.conf (wich worked fine for months) wich is like this
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
#CleanMethod = KeepInstalled
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
#ArchAudio
# tried and tested packages
[archaudio-stable]
Server = http://repos.archaudio.org/stable/x86_64
#ArchAudio
# these are..for testing?
[archaudio-testing]
Server = http://repos.archaudio.org/testing/x86_64
#ArchAudio
# for your pleasure
[archaudio-experimental]
Server = http://repos.archaudio.org/experimental/x86_64
and tried to update with it using pacman, wich doesn't succed also:
[studio@myhost ~]$ sudo pacman -Syu
Senha:
erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
:: Sincronizando a base de dados de pacotes...
erro: falha ao atualizar core (nenhum servidor configurado para o repositório)
erro: falha ao atualizar extra (nenhum servidor configurado para o repositório)
erro: falha ao atualizar community (nenhum servidor configurado para o repositório)
archaudio-stable está atualizado
archaudio-testing está atualizado
archaudio-experimental está atualizado
:: Iniciando atualização do sistema...
atenção: bristol: local (0.60.5-1) é mais novo que archaudio-testing (0.40.8-1)
atenção: fil-plugins: local (0.3.0-4) é mais novo que archaudio-testing (0.3.0-3)
atenção: guitarix: local (0.11.0-1) é mais novo que archaudio-testing (0.06.0-1)
atenção: kernel26rt: local (2.6.33.7_rt29-1) é mais novo que archaudio-stable (2.6.31_rt10-4)
atenção: lash: local (0.6.0~rc2-3) é mais novo que archaudio-testing (0.6.0~rc2-1)
atenção: ll-plugins: local (0.2.1-4) é mais novo que archaudio-testing (0.2.1-3)
atenção: lv2-c++-tools: local (1.0.3-1) é mais novo que archaudio-testing (1.0.2-1)
atenção: lv2vocoder: local (1-4) é mais novo que archaudio-testing (1-3)
atenção: rakarrack: local (0.5.8-1) é mais novo que archaudio-testing (0.4.2-1)
atenção: rev-plugins: local (0.3.1-3) é mais novo que archaudio-testing (0.3.1-2)
atenção: swh-lv2: local (1.0.15-3) é mais novo que archaudio-testing (1.0.15-2)
não há nada a fazer
[studio@myhost ~]$
!!!all messages are in portuguese but I think it is possible to understand them, if not i will translate
EDIT:
OK, I undestand the last problem and I changed my mirrolist from
# 2010-08-11 23:15
# generated by reflector
# ranked by rankmirrors
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/$arch
Server = ftp://mirrors.kernel.org/archlinux/$repo/os/$arch
Server = http://archlinux.c3sl.ufpr.br/$repo/os/$arch
Server = http://archlinux.limun.org/$repo/os/$arch
Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
Server = http://mirrors.kernel.org/archlinux/$repo/os/$arch
Server = http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/$arch
to
# 2010-08-11 23:15
# generated by reflector
# ranked by rankmirrors
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = ftp://mirrors.kernel.org/archlinux/$repo/os/x86_64
Server = http://archlinux.c3sl.ufpr.br/$repo/os/x86_64
Server = http://archlinux.limun.org/$repo/os/x86_64
Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/x86_64
Server = http://mirrors.kernel.org/archlinux/$repo/os/x86_64
Server = http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
and now it's working again
but I don't understand how this all happened
AND: how can I force reflector to output a correct mirrorlist for 64bit?
Last edited by capoeira (2010-08-12 15:18:15)

[SOLVED] Pacman failed retrieving file 'core.db' after removing KDE

Hey, I had to remove KDE and foolishly used the -Rsc flag. Now, trying to update yields:
[root@Gal-PC2 gal]# pacman -Sy
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mirror.isoc.org.il : Resolving timed out after 10524 milliseconds
error: failed retrieving file 'core.db' from mirror.us.leaseweb.net : Resolving timed out after 10523 milliseconds
I tryed using the -Sy and -Syy flags to update the database, and made sure I am not using ipv6. I think the -Rsc flag might deleted an importent package. I can connect to the net, and I can acess mirrors using http and I can ping the mirrors. The error persists on a large number of mirrors. Any help will be appriciated.
Last edited by Greenstuff (2015-02-08 20:49:24)

Sorry, will do!
The debug printed a lot of the first errors, so I cut them. This is what pacman --Syu --debug show:
debug: adding new server URL to database 'multilib': [url]http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.ds.hj.se/pub/os/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.uni-kl.de/pub/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.tu-chemnitz.de/pub/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://mirror.lnx.sk/pub/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://mirrors.st.uz/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://mirrors.mithril.org.ua/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.uni-bayreuth.de/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://artfiles.org/archlinux.org/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://repo.ukdw.ac.id/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://linux.cs.nctu.edu.tw/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.kaist.ac.kr/ArchLinux/multilib/os/x86_64[/url]
debug: config: new section '(null)'
debug: config: finished parsing /etc/pacman.conf
:: Synchronizing package databases...
debug: url: [url]http://mirror.isoc.org.il/pub/archlinux/core/os/x86_64/core.db[/url]
debug: maxsize: 26214400
debug: using time condition: 1422991262
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
debug: curl returned error 28 from transfer
error: failed retrieving file 'core.db' from mirror.isoc.org.il : Resolving timed out after 10523 milliseconds
debug: url: [url]http://mirror.us.leaseweb.net/archlinux/core/os/x86_64/core.db[/url]
debug: maxsize: 26214400
debug: using time condition: 1422991262
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
EDIT: SOLVED!
Ok, so I did indeed disable ipv6 as I promised, but turns out I put in the GRUB kernel line "ipv6.disable_ipv6=1". Upon re-reading the wiki, turns out this means ipv6 is disabled but tunnels with ipv6 may be opened by programs. I changed to "ipv6.disable=1" and pacman updates away! I hope others will find this usefull. Be careful!
Last edited by Greenstuff (2015-02-08 20:52:45)

Failed retrieving file 'core.db.tar.gz'

Hello !
I'm trying to install Archlinux from another distro (currently gentoo) but when I have to do pacman_chroot -Syf base --ignore kernel26 (this uses the static version of pacman), I get nasty errors :
gyscos ArchLinux # pacman_chroot -Syf base --ignore kernel26
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : Connexion terminée par expiration du délai d'attente
error: failed retrieving file 'core.db.tar.gz' from locke.suu.edu : Connexion terminée par expiration du délai d'attente
error: failed retrieving file 'core.db.tar.gz' from mirrors.unixheads.org : Connexion terminée par expiration du délai d'attente
error: failed retrieving file 'core.db.tar.gz' from ftp-linux.cc.gatech.edu : Le réseau n'est pas accessible
error: failed retrieving file 'core.db.tar.gz' from mirror.cs.vt.edu : Connexion terminée par expiration du délai d'attente
error: failed retrieving file 'core.db.tar.gz' from mirrors.easynews.com : Connexion terminée par expiration du délai d'attente
error: failed retrieving file 'core.db.tar.gz' from ftp.ibiblio.org : Connexion terminée par expiration du délai d'attente
The error is in french, meaning "Connexion timed out"
I am behind a proxy, but it is configured in http_proxy and ftp_proxy vars, and in my ~/.wgetrc
Any idea what I have to do ? Thanks !
EDIT : if I try to wget ftp://ftp.archlinux.org/core/os/i686/core.db.tar.gz, it works just fine... so the problem shouldn't be my network...
Last edited by Gyscos (2009-09-19 09:44:21)

Thanks so much ! It was using tmp/pacman.conf and not etc/pacman.conf.
Now it works so fine !!!

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly compo

adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80070422.
I have tried many things to try to install it and I have been unsucessful. Please help I have windows 8 64bit.

This did not resolve my issue, it actually made things worse. I did what
you had told me to do below, and it did not work. Tried to access the
internet to respond back to you and my computer was not able to reach the
internet. Tried reaching adobe support and not was able to, even tried
calling was on the phone for 20 minutes and no one answered. I was not able
to re install windows. Contacted Asus from another computer and they were
not able to help me reinstall windows They had asked me to ship my computer
back to them, due to them not being able to resolve the issue and help me
reinstall windows. I luckily had a backup on my external hard drive and was
able to reinstall windows 8. Spent over an hour and half trying to fix
that. Here I am still not able to install adobe reader. I was very unhappy
with what I was told to do and it gave me this issue.
· Open an Administrator command prompt: Right-click Start > All Programs >
Accessories > Command Prompt and select Run As Administrator. Click Allow
for the elevation prompt
· In the command prompt, type the command below:
fsutil resource setautoreset true C:\
The line above assumes that C: is the drive in which Vista is installed. If
it is installed on another drive like D:, change the drive letter
appropriately.
· Restart the system.
· Install Acrobat or Adobe Reader again.

ERROR: An error occurred during the installation of assembly component / ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

During the Installation of LR I get an error message. Initially I didn't have enough space for the installation on the start partition drive. However, now, it should be sufficient and I re-booted the computer a couple of time, hence I would assume that the temporary installation files have been deleted.
Now, nevertheless each time I try to re-install the software I get the following messages:
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
Since PS was installed without problems I would refrain from deinstalling the Creative Cloud and start over again.
Any hints?
Thx

Claasd5335054 you will want to review the MSI log files to determine what error message is preventing the installation from completing.
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
This is the only error information contained within Adobe Lightroom 5's installation log. The MSI log files contain the additional error messages.

When i download itune then An error occurred during the installation of assembly 'Microsoft CRT.version="8.0.50727.4053".type="win32".publicKey Token="1fc8b9a1e18e3b".processorArchitecture="x86"'.Please refer to help Suppport for more information.

when i download iTunes during downloading process on messege shown:
An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.4053”.type=”win32”.publicKeyToken=”1fc8b9a1e18e3b”.proce ssorArchitecture=”x86”’.Please refer to helpSuppport for more information. HRESULT:0x8007054F
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes. i don't have mcafee security. i have zonealarm security.
please guide me for download itunes in my pc.

Did you read threads "more like this" on the right side?
Yes there are issues and tips on resolving install errors.

Error 1935 - Adobe Reader (11) - An error occurred during the installation of assembly component - Windows 7

NOT RESOLVED
It seems to be a problem with my windows installation. I will re-install at a later date since installing PDF viewing programs the only issue.
Problem:
While installing Adobe Reader XI using the install_reader11_en_mssd_aaa_aih.exe from Adobe Reader Install for all versions and AdbeRdr11000_en_US.msi from a forum post on here. Error 1935 occurs using both installers and causes the setup to fail and initiate rollback.
Additional information:
In Programs & Features list there is no adobe reader as you can see:
This is pretty much a clean install of windows on which I have installed: Adobe Flash Player (16), Steam + some games, Chrome, Skype and some Visual C++ Redistributables, .NET Framwork, Drivers for GPU, CPU, Motherboard and USB devices.
Error:
Error 1935. An error occurred during the installation of assembly component
{B708EB72-AA82-3EB7-8BB0-D845BA35C93D}.
HRESULT: 0x80070308
System:
Windows 7 x64 - installed on a SSD.
Motherboard: ASRock Z97 Extreme 4
GPU: Gigabtye - G1 Gaming GTX 970
CPU: Intel Core - i7 4770K @4.00 GHz
RAM: 16GB Kingston Hyper X (8x2)
Steps taken:
1. I have cleared the transaction log using command prompt with the following command:
fsutil resource setautoreset true C:\
Restarting the computer and trying to install Adobe Reader 11 results in the same error.
2. Restarting the computer, disabling Malwarebytes Anti-Malware and installing Adobe Reader 11 results in the same error.
3. Chrome has "allow all sites to run JavaScript" checked.
Thanks
Edit:
I have attempted to install an earlier version (10.1.4) of Adobe Reader - Same error occurs.
Edit 2:
I'm going to look for some alternatives for the mean time
Edit 2.1:
These alternative programs are failing to install as well. Multiple errors, I now assume the issue is with my windows installation.

Hi Kanker ,
Please refer to the following link and see if it helps.
https://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Let us know with your response .
Stay well.
Regards
Sukrit Dhingra

An error occurred during the installation process: error occurred while installing additional adobe

I get this message: An error occurred during the installation process: error occurred while installing additional adobe packages. when trying to install CS2 InDesign UPGRADE from id 2 on new IMAC 2.4 GHz 4 GB.   Any one else with same issue?   Trevor

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

IPV6 issues during the installation? "error: failed retrieving file"

Similar Messages

Maybe you are looking for