IPv6 not working with Netgear N450 CG3000Dv2

IPv6 is not working with my new Netgear cable modem router.Model N450/CG3000Dv2
Hardware Version R2.05A2
Software Version V1.02.10T
I called Comcast and Netgear support and they were no help.
IPv4 works but not IPv6 and the blue downstream channel LED never stops blinking.Can this be be made to work with IPv6 or should I take it back to the store? 

Yes, that will work because it is bypassing the router and modem is in bridge mode.
I am investigating this further, but in the mean while I have enabled dual stack on your device, can you check IPv6 on your end now? Should be up and running...
-Chirag

Similar Messages

  • Airport Express Not Working With Netgear Router

    I have two Airport Expresses connected to my Netgear WNDR3300.  I run Windows 7 on all my computers.  One express works fine, wirelessly streaming music in several rooms.  However, the other does not work unless it is plugged into my router.  When it is unplugged and I try to connect to it via iTunes I have a "connection timed out" message.  Genius wasn't able to help me, and the Apple support won't help me over the phone because the express is out of warranty.  It is a 1st generation Express, but was working fine until I installed the newer express.  Can anyone help?

    I am sorry that I don't have a definitive answer but I also have Windows computers and I have "inherited" some older Apple devices from my son and am trying to learn about them so in addition to searching this group,  I "Googled" "1st generation airport express" and it listed many specific posts in this group - I read them all and they might answer your question - good luck

  • AirMac Extreme and Airport Express not working with Netgear N Router?

    I've been using an AirMac Extreme (old model) as a wireless router, and Airport Express for it's airtunes functionality (conected to my Hi-Fi).
    These used to work fine, and both would show up in my Airport Utility on my Macs.
    I've now just upgraded to a 50MG broadband contract, and the engineer gave me a Network router as my old AirMac Extreme couldn't handle that bandwidth.
    When I connected my AirMac Extreme to my Netgear router I then got conflicts, sometimes it wouldn't show up, and it really slowed down my wireless signal. As a result the contractor for my broadband recommended I disconnect my Air Mac Extreme from the router. Speeds went up for the internet, but now I can't get my airtunes to work.
    What I want to know is can I just use my Netgear to transmit the broadband signal so I get maximum internet speeds, but then have my AirMac Extreme and Airport Express connected so that I can still listen to my itunes wirelessly?
    Ideally I'd like this to all be set up so that I could be conected to the internet through the Netgear wirelessly and listen to my itunes through the Airport Express at the same time.
    Thanks in advance for any advice.

    I am sorry that I don't have a definitive answer but I also have Windows computers and I have "inherited" some older Apple devices from my son and am trying to learn about them so in addition to searching this group,  I "Googled" "1st generation airport express" and it listed many specific posts in this group - I read them all and they might answer your question - good luck

  • WRT54G v6 not working with new Motorola SB6141 on Comcast (IPv4 and IPv6)

    My WRT54G v6 not working with a new Motorola SB6141 Cable Modem on Comcast (IPv4 and IPv6).
    Yesterday, I had my old DOCSIS 1.1 cable modem and the WRT54G had been working just fine for the past 8 years.
    Last night, I swap in the DOCSIS 3.0 SB6141 cable modem, and now the WRT54G keeps losing the internet connection.  When I go into the status page for the WRT54G, I often do not see DNS servers and sometimes do not even see an IP address.
    If I connect a PC directly to the SB6141 cable modem, I have no problems whatsoever.  But whenever I connect through the WRT54G and power cycle both devices, then I have internet connectivity for about an hour before it drops out.  I have noticed my gateway IP address and DNS servers change at that time as well.  I can also force the Linksys to lose connectivity by doing a DHCP release/renew on the Linksys status page.
    Is this behavior because of the dual stack (IPv4 and IPv6) coming through the cable modem from Comcast now?  Is there any way I can keep using my WRT54G v6 now that I have the SB6141 cable modem?  

    You just have to install it correctly.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&login=1&app=search&vw=1&articleid=3686

  • Airport express not working with optus network

    Hi there, the airport express seems not working with my optus network. It is keeping me I cannot access the internet but I do have a wifi signal. Initially I thought there was some problems with Enhernet Wan port on the AE, but after I've done some research I found there might some changes needed to be done with my old router. All I know is im using a NETGEAR router, network type is PPPOE. Also, there were people metioned on the forum that theold modern should be changed to brigdeging mode. I have no idea what is it. Please help. cheers.

    Configuration is simple if you start from a factory default condition.  Then connect the Airport to AC power and finally to the Internet modem (or modem/router).  Open Airport Utility on your Mac or other computer and accept all of the recommendations.  After confirming that it works, insert your desired administrative and WiFi passwords.
    Do not expect the Airport to respond instantly to the configuration commands.  BE PATIENT!

  • Hp Photosmart not working with new router

    My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

    @Ann99, welcome to the forums
    I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
    I have some questions and some things for you to try.
    1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
    2. What did tech support determine the issue was when you called them?
    3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
    Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
    The Printer Is Not Found During a Wireless Network Installation
    4. What Operating System are you running on your computer?
    5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
    Please let me know all of the information and results from your troubleshooting above!
    Have a terrific day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • My operating system windows XP not working with photoshop cloud, why not?

    I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
    Please help
    Roy

    Do you have the latest version of iTunes?  If not, get it at:
    http://www.apple.com/itunes

  • Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

    adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Application is not working with mouse

    Dear All,
    We have a strange issue in the our application (Oracle form) in the one of our client machine.
    Some times the forms are not able to work with the mouse but is able to work with the keyboard. After one or two machine restart its again working. When the issue occur we can able to work in other applications using mouse.
    Our Applications server is in Other country and client are accessing from India.
    This occurs for some user and not for all.
    Application server Version          10.1.2.0.2.
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
    Java Plug-in version 1.6.0_31 .
    Please any info will help us lot.

    Thank you for the quick replies Michael Ferrante and HamidHelal.
    But since its occurring for some users (perticulary indian users) and some times. And also its occurring in production environment not in development environment.
    Even the java control panel is not working with mouse.
    For other country customers everything working fine.
    So its difficult for me to apply the patch with these uncertainties.
    Checking with fresh java installation and let you know the status.
    Thanks.

  • Voice Memo is not working with iOS 8.2

    Voice Memo Records is not working with iOS 8.2. how to fix it?

    Voice Memo Records is not working with iOS 8.2. how to fix it?

  • On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

    on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
    i cant see menu page on display screen

    http://support.apple.com/kb/HT1808

  • Caller ID not working with Nokia 6600?

    I have a T-Mobile (US) Nokia 6600, and I can't seem to get address book to display incoming SMS or the caller ID of incoming calls. I've successfully paired the phone via bluetooth, and I can make address book dial the phone and send an sms. I can sync via iSync, use my phone as a modem, etc. etc.
    But regardless of what settings I tweak, I can't seem to get Address Book to show a bezel of any kind on incoming calls - not even an 'Unknown Caller' message! Am I missing something obvious? Third party apps like BluePhoneElite work just fine, so I'm pretty sure it's something wrong with Address Book...
    15" Aluminum Powerbook 1.5 GHz   Mac OS X (10.4.5)  

     
    mdcdsc wrote:
    My caller ID does not work with the new ap either.  I don't like the new ap at all.  The old one was beautiful.  Now my email is very hard to see, so much that I will just use the Apple email that comes with my IPOD.  The caller ID was my favorite thing with the old ap.  and now it doesn't work.  I have followed the instructions and turned everything on, but it just does not work.
    The Caller ID issue was due to an outage. It should be resolved anytime soon. Can yu log out and log back in. Go to app settings and in notifications and turn CAller ID off and on.
    On email - what do you mean 'email is very hard to see' ? I would like to pass on this feedback to the team.

  • Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

    Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

    Please check the Play Store app for any Flash updates and install them if present.

  • Flash player does not work with Ie or Firefox with win 8.1?

    Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
    If I try and install it it says it is already installed. Your onsite  installer says it is not applicable to my machine.
    I have followed all the normal steps re enabling addons and active filters etc.
    all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
    Version of flashplayer is 15....03.......

    Flash Player is a built-in component of Internet Explorer.  There's nothing separate to download or install.
    Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
    For problems where IE isn't being detected by sites that require Flash:
    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

Maybe you are looking for