IPv6 problem when STAMINA is on

Hello there, sorry for my improving English.
I own an Xperia Z3 Compact (D5833 23.0.1.A.1.49 Customized HK).
I have IPv6 internet connection when connected to WiFi. But if STAMINA mode and Extended standby is on, IPv6 connection drops after screen off for about 30min more or less. IPv4 still works. IPv6 always works when STAMINA mode is off.
I search on the net and find out a post here:
https://talk.sonymobile.com/t5/Xperia-SP/Activating-STAMINA-mode-causes-constant-reboots/td-p/680659
Don't know we have a same problem or not.
Thanks.

When you turn on the display, is the connection re-established again?
What apps do you have in your whitelist that's using the connection?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

How do I stop Firefox from creating untitled web pages when I try to send email from a web page. The only way I have found is to turn the computor off and then reboot. I don't have this problem when using Internet Explorer

Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.

See [[Firefox keeps opening many tabs or windows]]

Firefox gets problems when 2,7 GB of memory is used by Firefox

Firefox gets problems when 2,7 GB of memory is used by Firefox. Or more. Like 2,8 GB.
It started when I read jpost.com with tens of tabs open. I don't remember how many. But I know there was more than 40.
On the tab I that I was reading, the page turned completely black. Pitch black with nothing else, not even the Firefox interface. It was actually a pitch black shape that looked like a web page in shape. The blackness quickly disappeared and the page was normally readable again. But then it happened again - the page turned black again.
The same page turns black happened again later.
One of my browsing sessions had Firefox slow down so much that you could see scrolling happening when I used scrolling.
Still another time I had 60 tabs open and Firefox worked completely fine without freezes, slowdowns, or black shapes. I could close Firefox by just pressing the red X in the title bar.
Yesterday, I had 50 tabs open and I experienced a slowdown when I looked at the Breaking News headlines. The headlines would show slower than usual. The Breaking News headlines at jpost.com show the headlines a few words at a time until the headline is completely shown. Then the headline disappears and the next starts showing a few words at a time. And speed in general was not what you normally have with a computer that has 8 GB of memory. And a Core i5 processor. I opened two more tabs from the Breaking News section I had opened. After I opened a new window, Firefox froze. I had to close Firefox from the Task Manager by pressing End process. I had used Firefox for 6 hours without ever closing any of the tabs I had opened.
In all of these cases, more than 40 tabs were open. In all of these cases, the slow down or freeze meant I had to use Task Manager and then press End process on the Processes tab. In all cases except the two I describe in the next paragraph, I never close any tabs after opening them. No problems have ever happened until Firefox started using 2,7 GB of memory. Until that point, everything is normal with no freezes or slowdowns.
At two times, I tried to reduce memory usage by closing tabs. However, in both cases this would make Firefox freeze. In one of these cases, Firefox would show something bizarre: there would be about 7 tabs, and one of the tabs would be partly shown. Also, Firefox would show the busy cursor. Firefox did not show how many tabs I actually had. The second time, I tried to close the tabs by clicking Close other tabs in the menu that you get when right-click a tab. The tabs would close fine, but I remember that I opened Gmail and then I did this: I clicked on the Promotions tab. Instead of seeing the tab with the Emails, Firefox showed a busy cursor and the title bar said not responding. Firefox froze.
The reason might be Adblock Plus memory usage. In Adblock Plus home page, developer Wladimir Palant writes in his blog about how Adblock Plus uses a lot of memory: https://adblockplus.org/blog/on-the-adblock-plus-memory-consumption .

One more bit of information: I have a Geforce 640 GT graphics card. My graphics card drivers are old- version 311.41. The newest version of the drivers is 340.52. Would a new graphics card driver solve the problem?

Problem when I execute program SCM in background

Hi experts,
    I am with problem when I execute a program (SCM) in background. I inserted a new field (estoque_seg(10)) and the process stopped at execute in background.When I call transaction and press F8, works but for this, I need jump the consistence IF sy-batch IS INITIAL....Dont has any bath imput, only functions. Any idea?
Follow below the code:
Estrutura para tabela ENTRADA
DATA: BEGIN OF st_entrada,
        matnr(40)            TYPE c,
        werks(20)            TYPE c,
        ponto_abas(10)       TYPE c,
        estoque_max(10)      TYPE c,
        cobertura(10)        TYPE c,
        estoque_seg(10)      TYPE c, " Erlon Lourenço 20/01/2011
      END OF st_entrada.
Estrutura para tabela de LOG
*TYPES: BEGIN OF st_saida,
       pernr(8)             TYPE c ,
       date(10)             TYPE c,
       er_contribuition(15) TYPE c,
       tax(15)              TYPE c,
       msg_erro(80)         TYPE c,
     END OF st_saida.
Tabela para obter descricao da mensagem
*DATA: ti_saida TYPE STANDARD TABLE OF st_saida WITH HEADER LINE
                                              INITIAL SIZE 0.
Tabela que recebera o arquivo texto
DATA: BEGIN OF ti_entrada OCCURS 0.
        INCLUDE STRUCTURE st_entrada.
DATA: END OF ti_entrada.
DATA: BEGIN OF it_matid OCCURS 0,
matnr TYPE /sapapo/matkey-matnr,
matid TYPE /sapapo/matkey-matid,
END OF it_matid.
DATA: BEGIN OF it_locid OCCURS 0,
locno TYPE /sapapo/loc-locno,
locid TYPE /sapapo/loc-locid,
END OF it_locid.
DATA: BEGIN OF it_matlotsz OCCURS 0,
target_dur TYPE /sapapo/matlotsz-target_dur,
END OF it_matlotsz.
DATA:        wa_matloc       LIKE /sapapo/matloc   OCCURS 0 WITH HEADER LINE,
             wa_matlsim      LIKE /sapapo/matlsim OCCURS 0 WITH HEADER LINE,
             wa_matlotsz     LIKE /sapapo/matlotsz OCCURS 0 WITH HEADER LINE.
Variáveis Globais
DATA: v_tabix   TYPE sy-tabix,
      v_vrsioid TYPE /sapapo/apo01-vrsioid,
      v_tam     TYPE i.
    Select-Options & Parameters
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_versao    TYPE /sapapo/apo01-vrsioex OBLIGATORY DEFAULT '000',
             p_abas AS CHECKBOX ,
             p_est   AS CHECKBOX ,
             p_cober AS CHECKBOX ,
             p_estsg AS CHECKBOX.   " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
SELECTION-SCREEN END OF BLOCK b1.
    Start-of-Selection
START-OF-SELECTION.
PERFORM consiste.
PERFORM f_upload.
PERFORM f_processa_batch.
PERFORM f_saida_dados.
MESSAGE i000 WITH 'Processo encerrado com Sucesso'.
END-OF-SELECTION.
*&      Form F_UPLOAD
      text
--> p1        text
<-- p2        text
FORM f_upload .
DATA: lc_file TYPE string.
TYPES: BEGIN OF st_ent,
            cam(80),
         END OF st_ent.
DATA: ti_ent TYPE STANDARD TABLE OF st_ent WITH HEADER LINE
                                              INITIAL SIZE 0.
RANGES: r_file       FOR zget0001-field_content.
r_file[] = zbs_constantes=>obter( i_bukrs = space i_field = 'FILE' i_process = 'PONTO-REAB' ).
READ TABLE r_file INDEX 1.
lc_file = r_file-low.
CLEAR: ti_entrada,
         ti_entrada[],
         ti_ent,
         ti_ent[].
abrir arquivo para leitura
OPEN DATASET lc_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
    MESSAGE i000 WITH text-e01.
    STOP.
ENDIF.
Leitura de arquivos
DO.
    READ DATASET lc_file INTO ti_ent.
    IF sy-subrc <> 0.
      EXIT.
    ENDIF.
    APPEND ti_ent.
ENDDO.
Fechamento do arquivo
CLOSE DATASET lc_file.
LOOP AT ti_ent.
    SPLIT ti_ent AT ';' INTO ti_entrada-matnr ti_entrada-werks ti_entrada-ponto_abas ti_entrada-estoque_max ti_entrada-cobertura ti_entrada-estoque_seg.
    APPEND ti_entrada.
ENDLOOP.
ENDFORM.                    " F_UPLOAD
*&      Form F_PROCESSA_BATCH
      text
--> p1        text
<-- p2        text
FORM f_processa_batch .
LOOP AT ti_entrada.
    v_tabix = sy-tabix.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-matnr
      IMPORTING
        output = ti_entrada-matnr.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-ponto_abas
      IMPORTING
        output = ti_entrada-ponto_abas.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-estoque_max
      IMPORTING
        output = ti_entrada-estoque_max.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-cobertura
      IMPORTING
        output = ti_entrada-cobertura.
IA - ERLON LOURENCO - 20/01/2012
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = ti_entrada-estoque_seg
      IMPORTING
        output = ti_entrada-estoque_seg.
FA - ERLON LOURENCO - 20/01/2012
    MODIFY ti_entrada INDEX v_tabix.
ENDLOOP.
CLEAR: it_matid,
         it_matid[],
         it_locid,
         it_locid[],
         wa_matlsim,
         wa_matlsim[],
         wa_matloc,
         wa_matloc[].
SELECT matnr matid INTO TABLE it_matid FROM /sapapo/matkey
FOR ALL ENTRIES IN ti_entrada WHERE matnr = ti_entrada-matnr.
SELECT locno locid INTO TABLE it_locid FROM /sapapo/loc
FOR ALL ENTRIES IN ti_entrada WHERE locno = ti_entrada-werks.
IF p_versao = '000'.
    LOOP AT ti_entrada.
      READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
      IF sy-subrc = 0 .
        READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
        IF sy-subrc = 0.
          SELECT SINGLE * INTO wa_matloc FROM /sapapo/matloc WHERE matid = it_matid-matid AND
                                                                   locid = it_locid-locid.
          IF sy-subrc = 0.
            IF p_abas = 'X'.
              wa_matloc-reord    = ti_entrada-ponto_abas.
            ENDIF.
            IF p_est = 'X'.
              wa_matloc-maxstock = ti_entrada-estoque_max.
            ENDIF.
            " IA - Erlon Lourenço - 23/01/2012
            if p_estsg = 'X'.
              wa_matloc-safty    = ti_entrada-estoque_seg.     " Erlon Lourenço - 23/01/2012
            endif.
            "FA - Erlon Lourenço - 23/01/2012
            IF p_abas = 'X'   OR
               p_est   = 'X'   OR
               p_estsg = 'X'.      " Erlon Lourenço - 23/01/2012
              APPEND wa_matloc TO wa_matloc.
            ENDIF.
            SELECT SINGLE * INTO wa_matlotsz FROM /sapapo/matlotsz WHERE lszid = wa_matloc-lszid.
            IF sy-subrc = 0.
              IF p_cober = 'X'.
                wa_matlotsz-target_dur = ti_entrada-cobertura.
                APPEND wa_matlotsz TO wa_matlotsz.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDLOOP.   " LOOP AT ti_entrada.
ELSE.
Verifica versáo para saber se preenche a tabela wa_matlsim
    SELECT SINGLE vrsioid INTO v_vrsioid FROM /sapapo/apo01 WHERE vrsioex = p_versao.
    IF sy-subrc = 0.
      SELECT * INTO TABLE wa_matlsim FROM /sapapo/matlsim WHERE simid = v_vrsioid.
      IF wa_matlsim[] IS NOT INITIAL.
        LOOP AT ti_entrada.
          READ TABLE it_matid WITH KEY matnr = ti_entrada-matnr.
          IF sy-subrc = 0 .
            READ TABLE it_locid WITH KEY locno = ti_entrada-werks.
            IF sy-subrc = 0.
              READ TABLE wa_matlsim WITH KEY matid = wa_matloc-matid
                                             locid = wa_matloc-locid.
              IF sy-subrc = 0.
                wa_matlsim-reord    = ti_entrada-ponto_abas.
                wa_matlsim-maxstock = ti_entrada-estoque_max.
                wa_matlsim-safty    = ti_entrada-estoque_seg.     " Erlon Lourenço - 23/01/2012
                MODIFY wa_matlsim INDEX v_tabix.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDLOOP. " LOOP AT ti_entrada.
      ENDIF.     " IF wa_matlsim[] IS NOT INITIAL.
    ENDIF.     " IF sy-subrc = 0. 1º
ENDIF.     "IF p_versao = '000'
Funcáo que atualiza campos nas bases de dados.
CALL FUNCTION '/SAPAPO/DM_PRODUCTS_POST'
    EXPORTING
      iv_vb         = 'U'
    TABLES
      it_matloc     = wa_matloc
      it_matlsim    = wa_matlsim
      it_matlotsz   = wa_matlotsz
    EXCEPTIONS
      not_qualified = 1
      insert_failed = 2
      update_failed = 3
      OTHERS        = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " F_PROCESSA_BATCH
FORM BDC_DYNPRO
*&      Form F_SAIDA_DADOS
      text
--> p1        text
<-- p2        text
FORM f_saida_dados .
IF ti_saida[] IS NOT INITIAL.
   DATA: lc_file TYPE string.
   lc_file = p_erros.
   CALL FUNCTION 'GUI_DOWNLOAD'
     EXPORTING
BIN_FILESIZE                    =
       filename                        = lc_file
FILETYPE                        = 'ASC'
     TABLES
       data_tab                        = ti_saida
FIELDNAMES                      =
    EXCEPTIONS
      file_write_error                = 1
      no_batch                        = 2
      gui_refuse_filetransfer         = 3
      invalid_type                    = 4
      no_authority                    = 5
      unknown_error                   = 6
      header_not_allowed              = 7
      separator_not_allowed           = 8
      filesize_not_allowed            = 9
      header_too_long                 = 10
      dp_error_create                 = 11
      dp_error_send                   = 12
      dp_error_write                  = 13
      unknown_dp_error                = 14
      access_denied                   = 15
      dp_out_of_memory                = 16
      disk_full                       = 17
      dp_timeout                      = 18
      file_not_found                  = 19
      dataprovider_exception          = 20
      control_flush_error             = 21
      OTHERS                          = 22
   IF sy-subrc <> 0.
     MESSAGE i005 WITH 'Error to unload file !'.
     STOP.
   ENDIF.
ENDIF.
ENDFORM.                    " F_SAIDA_DADOS
*&      Form CONSISTE
      text
--> p1        text
<-- p2        text
FORM consiste .
IF p_abas IS INITIAL AND
     p_est   IS INITIAL AND
     p_cober IS INITIAL AND
     p_estsg IS INITIAL.   " ERLON LOURENCO - 20/01/2012 - Estoque Segurança
    MESSAGE i000 WITH text-e03.
    STOP.
ENDIF.
IF sy-batch IS INITIAL.
    MESSAGE i000 WITH text-e02.
    STOP.
ENDIF.
Best regards,
Erlon Lourenço
Edited by: Erlon Louren on Jan 27, 2012 11:09 AM

Hi Raja,
            Check weather there are any enhancements to the datasource.If yes once check the code in CMOD.Seems there is some discrepency in that.
Regards
Karthik

Design problem when using Area Group Page -- BSP

We have installed MSS ERP2004 and are using the webdynpro based Area Group Page. From this page we have added links to diffrent BSP application (using BSP-iviews in the PCD).
The problem:
When we opens one of these links from the Area Group Page the BSP application is opening but the portal design is not inherited.
The strange thing is that if we refresh the iview the portal design is inherited.
Why did it not work when opened at first?
'Support portal integration' is ticked of in the BSP application.
'Supply Portal Stylesheet' is set to 'Yes' for the iview in the PCD.
We are running ERP2004/WAS6.40.
Anyone with the same experience?
Regards
Bjorn

We have installed MSS ERP2004 and are using the webdynpro based Area Group Page. From this page we have added links to diffrent BSP application (using BSP-iviews in the PCD).
The problem:
When we opens one of these links from the Area Group Page the BSP application is opening but the portal design is not inherited.
The strange thing is that if we refresh the iview the portal design is inherited.
Why did it not work when opened at first?
'Support portal integration' is ticked of in the BSP application.
'Supply Portal Stylesheet' is set to 'Yes' for the iview in the PCD.
We are running ERP2004/WAS6.40.
Anyone with the same experience?
Regards
Bjorn

We have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc. from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when

Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj Kumar

Hi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN c

I met a problem when try to use ACSE+ Windows AD to authenticate two kind of WLAN clients:
1. Background:
We have two WLAN: staff and student, both of them will use PEAP-MSCHAPv2, ACSE will be the Radius server, it will use Windows AD's user database. In AD, they create two groups: staff and student. The testing account for staff is staff1, the testing account for student is student1.
2. Problem:
If student1 try to associate to staff WLAN, since both staff and student WLAN using the same authentication method, the auth request will be send to AD user database, since student1 is a valid user account in AD, then it will pass the authentication, then it will join the staff WLAN. How to prevent this happen?
3. Potential solution and its limitation:
1) Use group mapping in ACSE(Dynamic VLAN Assignment with WLCs based on ACS to Active Directory Group Mapping), but ACS can only support group mapping for those groups that have no more than 500 users. But the student group will definitely exceed 500 users, how to solve it?
2) Use methods like âRestrict WLAN Access based on SSID with WLC and Cisco Secure ACSâ: Configure DNIS with ssid name in NAR of ACSE, but since DNIS/NAR is only configurable in ACSE, don't know if AD support it or not, is there any options in AD like DNIS/NAR in ACSE?
Thanks for any suggestions!

I think the documentation for ACS states:
ACS can only support group mapping for users who belong to 500 or fewer Windows groups
I read that as, If a user belongs to >500 Windows Group, ACS can't map it. The group can have over 500 users, its just those users can't belong to more than 500 groups.

I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new

Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
I have tried shutting down, closing tabs, with no success. What's going on and how can I fix it?
Thanks,
Cindi B
PS: I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...

A Safari extension or third party plugin may be causing the menu bar issue.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
As for which OS X is installed.
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there.
v10.6 Snow Leopard v10.7 Lion v10.8 Mountain Lion
It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here.

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

Service entry problem when not accepted

We have a problem when there are multiple service entries agains a PO. There are no problems when we do the first entry and accept. The problem happens when we do a second entry and the end user only saves and forgets to accept the SES. When they do an invoice against this unaccepted SES the system brings in the previous SES number, when this goes unnoticed the vendor gets paid twice for the same thing. Is there a way for SAP to look at the SES field in the invoice and determine that this SES number has already been paid? Thanks in advance.

Hi Eric,
please try the following: check in transaction XK02 the field "Check Flag for Double Invoices or Credit Memos" (LFB1-REPRF).
Indicator which means that incoming invoices and credit memos are checked for double entries at the time of entry.
In checking for duplicate invoices, the system compares the following characteristics by default:
Vendor
Currency
Company code
Gross amount of the invoice
Reference document number
Invoice document date
If all of these characteristics are the same, the system issues a message that you can customize.
The system only checks for duplicate invoices in Materials Management if you enter the reference document number upon entering the invoice.
Of course if the invoice document date is different, there is no message M8108 issued. Please read also the notes 305201 and 308008.
I would recommend you to use the service based invoice verification function (set the field EKPO-LEBRE to X) in the PO item.
Regards,
Edit

Having problems when exporting .swf file as an animated gif

Hi:
I was wondering if anyone has ever had any issues exporting a
flash file as an animated gif? When I do so, the image quality is
very compromised and the animation is distorted. I know this is not
very specific question, but I have never encountered this issue
before, and I am trying to help a co-worker. I don't understand why
it looks exactly the way we want it to look as an swf file, but not
as an animated gif? Can anyone point me in the right direction as
to what to look for as the potential source of this problem? I have
the swf file, although this would not be very helpful as I don't
have access to the flash file (but I can send it to you if that
would help). We tried unchecking the feature to optimize the image,
and changed the color pallete to adaptive, but this didn't solve
the problem. I also tried removing any unnecessary layers prior to
the export. Basically, I'm not sure as to how to proceed and what
may be causing the problem. I also want to mention there is a
placed image on the stage. Could the type of image placed be
causing the problem when exporting to a gif file, but not as a
.swf? If anyone could help, I would really appreciate it! Thanks.
Sara

I also wanted to mention that the swf file uses sound. I am
reading an old book that I have on Flash and it's saying that Flash
and Shockwave Flash enter a special mode when they encounter a
stream sound in which the animation is forced to keep up with the
sound track, if the animation frames can not be drawn quickly
enough, some frames are skipped. I am also reading that the
animated gif format does not support sound. Again, the only
reference I have is for a very old version of flash, and I'm not
sure it applies to CS3. I am now just thinking that the sound may
be the issue.

Authorization problem when displaying icons in BW Report

Hi All
I have the following problem when display BW Report as iView: The report data itself is displayed perfectly but to display the icons (like DrillDown arrows, Hierarhy level open arrows) the Windows login message "Connect to <my BW server.com>:8000" appears and I have to enter BW user name and password explicitly. The system for BW is defined, the user is mapped, UIDPW method is used. Again, the report data itself is displayed, the problem is only with icons. I can see that the path to icons is like:
http://<my BW server>.com:8000/sap/bw/Mime/BEx/Icons/s_b_up.gif
How could I rid of this authorization request?

Thanks! I already did this and it helped for most of icons. But for five remaining icons i still get authorization request althoug these icons are in the same path. The icons are:
http://<server>.com/sap/bw/Mime/BEx/Icons/cascading.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/checked.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/separator.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/marked_right_35.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/loading.gif

IPv6 problem when STAMINA is on

Similar Messages

Maybe you are looking for