IPVC-3515-MCU12 cannot register CCM 4.1(3)

We've got the IPVC-3515-MCU12 with version 5.5.0.0.54 to integrate with CCM using SCCP. But, we find CCM cannot register it. Is there any configuration setting need to aware for it?

How did you set the MCU in the Call Manager? As Conference Bridge? or not?. In the MCU have yoy enable the SCCP protocol?

Similar Messages

  • How to find hardware details of IPVC-3515-MCU12

    Please help me with how to find hardware details of IPVC-3515-MCU12 & also for Cisco Unified MeetingPlace Express

    Hi Vijay,
    you can login into IPVC. Under Device---Basics, u can get Serial number, Hardware and Software version.
    regds,
    aman

  • Cannot access menu prompt for IPVC 3515 MCU

    Hi!
    When I console into IPVC 3515 MCU, I cannot get any menu prompt to reset the box to factory default. Instead, I see lots of error messages on ErrorPath display continuously. Any idea how to fix this?
    Here is the output after booting up:
    Main application started. Please wait...
    Attached TCP/IP interface to motfcc unit 0
    Attaching interface lo0...done
    Adding 37337 symbols for standalone.
    ==============================================================================
    CPU : MPC7410
    VxWorks Version : 5.5
    BSP version : 2.24
    Created : May 22 2006, 17:15:27
    WDB : Not included
    Chassis Type : ViaIP
    ==============================================================================
    -> Boot line: motfcc(0,0)rvhost: e=192.168.2.222:FFFFFF00 g=192.168.2.253
    ViaIP MPC755_MPC8260.
    Memory Size: 256 MBytes.
    HW Version:0xc
    bspSetRoutingTable: Error in routeAdd.
    BSP_EXC: Exception hook added
    calling Pre Startup ...
    MEMORY OK (address: 0x0 - 0x3000)
    calling Main Application ...
    ==============================================================================
    The last MCU config burn operation wrong: WARNING
    Retrieved old volume params with %75 confidence:
    Volume Parameters: FAT type: FAT16, sectors per cluster 255
    255 FAT copies, 0 clusters, 65535 sectors per FAT
    Sectors reserved -1, hidden -1, FAT sectors 16711425
    Root dir entries -1, sysId (null) , serial number ffffffff
    Label:" " ...
    Disk with 512 sectors of 512 bytes will be formatted with:
    Volume Parameters: FAT type: FAT12, sectors per cluster 1
    2 FAT copies, 500 clusters, 2 sectors per FAT
    Sectors reserved 1, hidden 0, FAT sectors 4
    Root dir entries 112, sysId VXDOS12 , serial number ffffffff
    Label:" " ...
    ************* LOGGER VERSION: 1.24 *************
    Initializing RVLogger System...
    VxWorks (for ViaIP MPC755_MPC8260) version 5.5.
    Kernel: WIND version 2.6.
    Made on May 22 2006, 17:15:27.
    Boot line:
    motfcc(0,0)rvhost: e=192.168.2.222:FFFFFF00 g=192.168.2.253
    ERROR path
    MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.autoRedialInt
    erval
    ERROR path
    MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.muteJoiningPa
    rticipants
    ERROR path
    MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.unmuteFirstPa
    rticipant
    ERROR path
    MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.webCollaborat
    ionMinPort
    ERROR path
    MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.webCollaborat
    ionMaxPort
    ERROR path
    MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.forcePassword
    0x

    Look very carefully for the following line:
    Press any Key To start configuration
    You have about 2-4 seconds to hit any key and it will bring up the configuration menu on your screen. I can see from your output that you have not attempted to change the IP address, default router address and netmask. This is evidence by the line containing rvhost. HTH

  • IPVC-3515-MCU24 bad quality with Tandberg endpoint

    Hi,
    We have a IPVC-3515-MCU24 with software version 5.6 registered to a Cisco Gatekeeper (12.4(25)) We also have Tandberg MXP endpoints registered to this gatekeeper. The MCU is configured with a HD/SD Continuous Presence with 720p enabled.
    The problem is that when we create a conference with any Tandberg endpoint the resolution never reachs 720p even when we have 2048Kbps.
    The Tandberg endpoint is already set to use sharpness resolution.
    Thank you in advance!

    In the configuration of the Tandberg endpoints, under Endpoint configuration -> Call Quality -> AAC-LD should be disabled. Also, under Endpoint configuration -> Motion quality -> Natural Video threshold should be off.
    Also reduce MTU size in MCU to 1400.

  • I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it.

    I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it. Adobe no longer supports activation. Is there a way I can keep using CS2? I need to get files back and forth to my coauthor. I also have CS6. I understand that files can go form 2 to 6, but not backwards. Thanks Robert

    you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads

  • Cannot register my CC and I do not know why

    I cannot register my CC to purchase. There is no problem with information, what to do?

    What do you mean you cant delete? Are they still in your contact app or they come up when you text or call them?

  • Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

    Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

    Sorry, but no help is possible. You can only use the UAE iTunes Store, and Apple can only offer what content they are able to license for sale in that country. You'll have to look elsewhere for content. Whether there are any other download stores able to sell in the UAE I don't know. You may need to purchased CDs and import them into iTunes.
    Regards.

  • Seeburger EDI Adapter Deployment Error: Cannot register EarLoader

    Hello,
    we currently have updated our SAP Netweaver Development Environment 2004s to SP20. This installation runs on IBM iSeries.
    We also have to deploy a Seeburger EDI Adapter (Version 1.8) but we faced following error in the deployment:
    ---snipped
    PM Error: Aborted: development component
    'SeeFunctionsEar'/'seeburger.com'/'SEEBURGER
    AG'/'20090701183537.1.8.1'/'1', grouped by software component
    'SeeXIExtendedTools'/'seeburger.com'/'LOCAL'/'20090701183537.1.8.1''/'1':
    Caught exception during application deployment from SAP J2EE Engine's
    deploy service:
    java.rmi.RemoteException: Cannot register EarLoader for application
    seeburger.com/SeeFunctionsEar..
    Reason: null; nested exception is:
    java.lang.NullPointerException
    (message ID:
    com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    ---snipped
    We've deployed not only with the JSPM but also with developer Studio. (The SDM-Tool has a big problem after upgrating to SP20 - SAP knows the error and with the next SP this will be fixed. So this tool cannot be used!)
    First of all, I think it is very useful for us to know what is the EarLoader but unfortunately we can't find any information on the sap help, documentation or here in the SDN. Neither on the Web .....
    Could someone explain the issue to me, please?
    Thanks in advance.
    Christian Sperlich

    Hi,
    1)Can you check your class path, whether it is configured correctly
    2)Check whether you have included the latest class file while importing
    3)Check whether you have activated the objects after you have made changes are imported
    Regards
    Agasthuri Doss

  • Bug in 10.1.3 production: Cannot register Custom ViewCriteriaAdapter

    Hi
    I think there is a bug in JDeveloper 10.1.3 production. I cannot register a custom ViewCriteriaAdapter (see also Thread BUG in 10.1.3 EA: Can't register custom ViewCriteriaAdapter
    This is my code:
    public class myAdapter implements ViewCriteriaAdapter
      public String getViewCriteriaClause(ViewObject viewobject, ViewCriteria viewcriteria)
        System.out.println("***** \"myAdapter\" successfully called ***** ");
        return "My ViewCriteria Clause";
    public class tester
      public static void main(String[] args)
        System.out.println("Check if you see a line which states that, that myAdapter was successfully called:");
        AppModuleImpl module = (AppModuleImpl) Configuration.createRootApplicationModule("project1.AppModule", "AppModuleLocal");
        ViewObjectImpl vo = module.getArticlesView1();
        vo.setViewCriteriaAdapter(new myAdapter());
        ViewCriteria vc = vo.createViewCriteria();
        ViewCriteriaRow vcRow = vc.createViewCriteriaRow();
        vcRow.setAttribute("ArticleNo", "like 'DV%'");
        vc.addElement(vcRow);   
        vo.applyViewCriteria(vc);
        vo.executeQuery();
        System.out.println("You didn't see such a line? This means 'myAdapter' has not been called, which is a bug!");
    }

    Some investigations discovered that the problem seems to be, that method "applyViewCriteria" in ViewObjectImpl resets the Custom ViewCriteriaAdapter.
    So the problem seems to be solved if you override ViewObjectImpl.applyViewCriteria() like this:
        public void applyViewCriteria(ViewCriteria viewcriteria)
          super.applyViewCriteria(viewcriteria);
          setViewCriteriaAdapter(new myAdapter());
        }Another workaround is to set property "jbo.ViewCriteriaAdapter" to "project1.myAdapter" in the Configuration of all ApplicationModules (or at least in the one which is first instantiated).
    Hope this helps.
    Frank Brandstetter

  • I downloaded photoshop elements 13 and cannot register it.

    I downloaded photoshop elements 13 and cannot register it or find a code.  I received no email. I have followed all the various instructions with no luck.  What can I do?

    Photoshop Elements is not part of the Cloud, I will move this to that forum
    Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
    Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
    -http://helpx.adobe.com/contact.html?product=photoshop-elements or
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

  • Cannot register Adobe XI Pro

    Hi All,
    I cannot register Adobe XI Pro and getting error message 'Please connect to the internet and retry' while registering product.

    Moved to Acrobat Installation & Update Issues

  • I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

    I have PSE7 on my old computer and I have the license key (but not the serial number). Cannot register it on my new computer - I get a message saying that number is invalid. What can I do?

    It does not magically appear in a new place.  It will only be where you put it.
    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • Ap 1231G cannot register to WLC

    Hi friends:
    my wlc version is 7.2.115.2.
    ap 1231G version is c1200-rcvk9w8-tar.124-21a.JA2
    the ap cannot register to WLC.
    the lap is used stats ip address,its can pinged to wlc.
    Version does not support?
    and the other ap is 1241 version is 12.4<13d>JA.its can register to wlc
    only this 1231G can not register.
    this picture is my WLC ap join stats detail.
    Thanks
    cena

    HI Cena,
    This error message means that the controller received a discovery request through a broadcast IP address that has a source IP address (given), which is not in any configured subnets on the controller. It also means that the controller dropped the packet. This typically happens when the u trunks all allowed VLANs instead of restricted them to wireless VLANs.
    Please allow only specific vlans.
    Complete these steps in order to resolve this problem:
    1.If the controller is on another subnet, the APs must be primed for the controller IP address, or the APs must receive the controllers IP address using any one of the discovery methods.
    2.The switch is configured to allow some VLANs that are not on the controller. Restrict the allowed VLANs on the trunks.
    Regards
    Dont forget to rate helpful posts.

  • My desktop fried in a power surge--- I bought a new one---I cannot register my CS2 even though I have the activation code

    My desktop fried in a power surge--- I bought a new one---I cannot register my CS2 even though I have the activation code

    Awesome! You're welcome!
    Well, I'm not exactly sure. I suppose they may know if you have or have not purchased it since you are probably signed in...Or they figure it's an old enough program, and few enough people know about the serial number, that they don't care too much.
    Benjamin

  • Cannot register iPod - help!

    i got an iTouch for my birthday, and i tried to connect it to my computer. It gives me the option to register it, but i can't find the button to register it. i only see a button that says 'register later.' it starts to cut off the words, like if there was a scroll bar to move to the right, i dont see it. its definately not there. i have an old iPod, which is connected to another computer in my house. that computer is way old and i dont think the iTunes library will let me buy any more songs because i'm unable to upgrade to another level of iTunes. but thats not the problem i'm having.
    i would like to register and start using my iTouch sometime soon, but i cannot register it.
    please help!
    thank you

    i've had a long day of school and practice and i'm going to sound like a complete idiot when i ask you this.. where is the control panel?
    haha i'm really sorry
    i know i've seen it before, i just cant find it

Maybe you are looking for

  • Will not boot in RAID 0

    I can't get the Win XP setup to load the drivers from the disk after the formatting stage. So, I've followed all of the instructions at the beginning of this thread. I boot the Windows cd and hit F6 as required. I'm prompted for the drivers and load

  • Hard Drive Has Vanished

    Today I used Carbon Copy Cloner to make a copy of my G5 iMac to an external Firewire drive. Once that was done I began to install Leopard onto the iMac. I've already installed Leopard onto my Macbook and it runs great. But the installer just stuck. I

  • Sorting contents of a JTREE

    Hi all.. I have a Jtree that needs to be sorted. How can it do it fast and efficiently as the size of the tree can be huge. I have the tree contents that has depth of max 4 or 5. Your help on this is greatly appreciated. Thanks Srivarun

  • Single InDesign CC File crashing after 10-15 Seconds-

    Hi All - A recent file that I was working on final packaging is crashing every time I open it after 10-15 seconds (seems like when it's fully loaded probably).  All other files load fine. Paste bin of the MacOSX error here: Crashing on Single Doc - P

  • Authorization Scheme vs. Condition Types

    Can someone give me a real world pro/con on deciding when to use one of these over the other? Thanks, Jeremy