Iq-816/win8x64pro/touchscreen problems

trying to help a friend out. they have an iq-816 touchsmart computer. the hard drive had failed. i installed a new one and purchashed win 8x64 pro as the operating system.
i didn't know this was going to be such a headache of an installation. i have read all about the black screen problems and display adapter problems. i have mostly corrected all of them.
my main problem right now is that i can't keep the touchscreen working after a reboot. basically, i have to disable the display adapter, install the nextwindow drivers, then re-enable the display adapter. after a computer re-boot, i have to follow the same process again in order to get the touchscreen to function again.
i suppose i could leave the display adapter disabled permanently but the computer suffers badly without it. very choppy when scrolling pages or viewing videos.
i'm just curious if anyone has found a solution to get this thing to work properly?
it is such a same on how bad hp support is for their products. even though it's an older computer and only a dualcore.. it seems to run very well with windows 8 and the computer itself with the monitor size is quite nice.

no one seemed to answer or help... but i would like to update my thread.
i was able to fix the problem. after digging into windows and searching online... seems that for some reason, windows needs to load the touchdriver before it loads the video driver on bootup. the same problem seems to exist to all older brand of computers or laptops running nextwindow drivers. i was able to manually change the load-up sequence for drivers so the touchdriver is loaded before the nvidia driver. now on a reboot the touchdrivers are still functional.

Similar Messages

How i instal adobe reader in my dell 1011 mini notebook. showing error i try in win xp win 7 win 8. but same problem

how i instal adobe reader in my dell 1011 mini notebook. showing error i try in win xp win 7 win 8. but same problem.
when i want to instal, go %40 60% and stop. machine hang no finish option show no stop.

Try the installer from http://get.adobe.com/reader/enterprise/
If that does not solve your problem, please provide the full and exact error message.

Updated itunes to 11.3 on win 7 but had problems. so reinstalled itunes 11.2 but now itunes won't recognize or sync my touch 3 with 5.1.

updated itunes to 11.3 on win 7 but had problems. so reinstalled itunes 11.2 but now itunes won't recognize or sync my touch 3 with 5.1. did all the recommended fixes, appears have correct driver, all necessary itunes programs, etc. still won't work. help!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I just installed my CS5.1 on my new Lenovo Laptop Win 8.1. Problem -- On Image Adjustments none of the adjustment options respond.

I just installed my CS5.1 on my new Lenovo Laptop Win 8.1. and everything worked for a day. On day 2 I ran into Problems -- On > Image >Adjustments none of the adjustment options respond. None of the toolbar functions such as >Crop etc respond.
I then installed the same download on my PC and everything works as it should.
Can anybody help please
Roland

Notebook Info
1 x Lenovo G710 Notebook, Intel® Core™ i5, 43,9 cm (17,3 "), 1000 GB HD,
Intel Core i5-4210M 2,60 GHz, (Turbo-Boost 2.0 bis 3,20 GHz)
43.9 cm (17.3") 900p (HD+) LED-Display (1600 x 900)
8192 MB DDR3-RAM
Harddisk: 1000GB SATA
NVIDIA N15V-GM mit 1GB DDR3
Prefs
As per download settings, I changed nothing
Image Info
Jpg conv.from RAW Canon, dim. 4746x3567, 6,64 Mb
The software worked on the first day, problems appeared next day. I uninstalled and deleted the exe.file, then redownloaded and reinstalled but same problem persists.
I then downloaded and installed on my PC and everything works.
Regards Roland

Win 8.1 upgrade problems

Haave attempted 8.1 upgrade and failed... tried several things including system refresh....have reinstalled all windows updates except 3.... kb2807986 kb2798162 kb2811660 and can not get them to install..... get error code 8024200d
tried the win trouble shooter and it said it corrected problem twice. but still get same error and no install. will not allow update to win 8.1 until these are installed... help!

Hi @Hobdy
Welcome to the HP Community! I saw your post regarding the 8024200D error message. I did some research into this error code and it lead me to this Microsoft Support link. While the link itself doesn't mention your error another Microsoft Support link regarding your error brought me to that page. So try the System Update Readiness Tool and let me know how it goes.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Lenovo G500 win 8.1 Radeon problem

Hi i bought Lenovo g500like a year ago and recently updated my system to win 8.1and then eveything starts. My games FPS drops for 30-40 to 11-12 (games like witcher 2 which should work fine on Radeon HD8750M). So i decided to install new version of AMD CCC but installation always end with problems and gaming still does not improve. Also if i try to turn off inter graphic card in manager it says that AMD drivers are not installed either they do not work properly and to reinstall them. What can i do? Please help!
Here is CCC installation error log.
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="Report.xml.xsl"?>
<monetreport xmlns:dt="urn:schemas-microsoft-com:datatypes">
<general>
<cmdline>-UI </cmdline>
<time>01/18/15 12:26:25</time>
<action>install</action>
<download></download>
</general>
<dcm>
<primary>
<name>AMD Radeon HD 8500M Series</name>
<manufacture>Advanced Micro Devices, Inc.</manufacture>
<chiptype></chiptype>
<chipid>0x6663</chipid>
<vendorid>0x1002</vendorid>
<ssid>0x3800</ssid>
<ssvid>0x17aa</ssvid>
<classcode>0x038000</classcode>
<revisionid>0x00</revisionid>
</primary>
</dcm>
<exist>
<package>
<description>Aktualizacja profilu PX</description>
<result></result>
<version>1.00.1</version>
<size>1 </size>
</package>
<package>
<description>Profile aplikacji OEM</description>
<result></result>
<version>1.00.0000</version>
<size>1 </size>
</package>
<package>
<description>Menedżer instalacji AMD Catalyst</description>
<result></result>
<version>8.0.916.0</version>
<size>20 </size>
</package>
<package>
<description>Sterownik ekranu AMD</description>
<result></result>
<version>13.150.102.0000</version>
<size>90 </size>
</package>
<package>
<description>AMD Accelerated Video Transcoding</description>
<result></result>
<version>13.15.100.30731</version>
<size>3 </size>
</package>
<package>
<description>AMD Catalyst Control Center</description>
<result></result>
<version>2013.0731.1514.25483</version>
<size>150 </size>
</package>
</exist>
<install>
<package>
<description>Menedżer instalacji AMD Catalyst</description>
<result>Succeed</result>
<version>8.0.916.0</version>
<size>20 </size>
</package>
<package>
<description>Sterownik ekranu AMD</description>
<result>Succeed</result>
<version>14.501.1003.0000</version>
<size>90 </size>
</package>
<package>
<description>AMD Accelerated Video Transcoding</description>
<result>Succeed</result>
<version>13.30.100.41120</version>
<size>3 </size>
</package>
<package>
<description>AMD Catalyst Control Center</description>
<result>Succeed</result>
<version>2014.1120.2123.38423</version>
<size>150 </size>
</package>
<package>
<description>AMD Gaming Evolved App</description>
<result>Succeed</result>
<version>2.10.000</version>
<size>49 </size>
</package>
</install>
<uninstall>
</uninstall>
<downloaded>
</downloaded>
<resource>
<hwinfo>Informacje o sprzęcie</hwinfo>
<existpkg>Istniejące pakiety</existpkg>
<pkg2inst>Pakiety do zainstalowania</pkg2inst>
<pkg2uninst>Pakiety do odinstalowania</pkg2uninst>
<otherdev>Inne wykryte urządzenia</otherdev>
<errmsg>Komunikaty o błędach</errmsg>
<name>Nazwa</name>
<manufacture>Producent</manufacture>
<chiptype>Typ układu scalonego</chiptype>
<chipid>Ident. urządzenia</chipid>
<otherhw>Inny sprzęt</otherhw>
<download>Pobierz pakiety</download>
<succeed>Powodzenie</succeed>
<fail>Niepowodzenie</fail>
<vendorid>Ident. dostawcy</vendorid>
<classcode>Kod klasy</classcode>
<revisionid>Identyfikator wersji</revisionid>
<ssid>Identyfikator podsystemu</ssid>
<ssvid>Identyfikator dostawcy podsystemu</ssvid>
<header1>Program Menedżer Instalacji Catalyst™</header1>
<header2>Raport z instalacji</header2>
<finalstatus>Stan końcowy:</finalstatus>
<versionofitem>Wersja elementu:</versionofitem>
<size>Rozmiar:</size>
<bytes>MB</bytes>
</resource>
</monetreport>

hi skladzien,
Welcome to the Forums.
For systems that have two GPU (Intel + AMD), you will need to update both the GPU drivers for Win8.1 for the graphics switching to work (chances are, the system is not switching properly to the Radeon HD8750M when playing games and it's only using the Intel Graphics):
Things to try:
1. Navigate to the Control Panel (icon views) > Programs and Features and uninstall anything that relates to Intel Graphics and AMD / ATI Graphics drivers (reboot if necessary).
2. Install these drivers in order and reboot if necessary:
1st: - Intel Video Driver for Windows 8.1 (32-bit, 64-bit)
2nd:- AMD Video Driver for Windows 8.1 (32-bit, 64-bit)
3. Set the power settings of the unit to High Performance and configure the AMD Control Center to max performance.
- Sample image
- Sample image
- Sample image
When finished, try running a game and observe the FPS.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Yoga 2 10inch with Win 8.1 and problem with CCleaner

Hi guys!
I bought my new Yoga 2 10inch with Win 8.1 few days ago and everything was all right, until i installed CCleaner. The CCleaner app window doesn't move smoothly when i'm using it by touch screen and touch pad, choosing the options works slowly and it doesn't display correcly...
Do you have the same problems?
Thanks a lot and sorry for my english

I guy on Youtube made a rough tutorial.
http://www.youtube.com/watch?v=lI8AnNBIlLQ
Englisch subtitles available
In the comments he suggests, to download the Iso with anouther win-8.1-key - no matter which one - and to install the system clean. In his opinion the system will get the key from the hardware. He is writing, that there is just a universal iso. So it's no problem to download an iso with another key, even if your system is a Home-Edition and you download it with a Pro-Key.
I will try this.
Hutson

How do I solve this win xp recovery / install problem?

Hello
I have made a backup of the Vista install that comes with the new laptop onto 3 DVDs.
Now I'm trying to launch the Toshiba Product Recovery Media (Win XP Pro) Discs to install Win XP instead.
The Toshiba Product Recovery Media consists of a 1 CD + 1 DVD (for Toshiba Satellite Pro L300)
When I boot up on the CD a Ramdisk OS is installed (great its working!) and then I get a message saying...
"Windows cannot find 'X:BIN\TOSDIALOG.EXE' Make sure you typed the name correctly, and try again. To search for a file, click the Start button, and then click Search." (OK button)
Maybe X: is the Ramdisk.
When I press okay the message it repeats two more times then the computer reboots. The screen is blank behind the message and nothing else is operable.
When I try to boot up from the DVD nothing happens.
If I start either the CD or DVD up in Vista there is no autoplay or any obvious ways of starting the recovery process.
I must be missing something simple.
Please can someone help?

One thing I did that could have caused a problem was...
With Vista installed I tried to create another partition. In the process I completely screwed up the C Drive booting up. So I had to use the emergency recovery and return to factory setting. Then I followed the process and reinstalled Vista.
Vista is now installed and running. Then I tried to install the Win XP. I would have thought that with Vista back up and running with the C: drive running effectively that it was back to exactly how it was before.

S410p not have SecureBoot in Bios - win 8.1 watermark problem

i can't find secureboot in bios, why?

It looks like PCI-E driver causes the problem. If I delete the PCI-E root port, Windows restarts, installs drivers again, and I have WIFI until next restart (so the problem is, that Win8 cannot turn on wireless). I think, that if I can find a driver for this AMD RS880M chipset, it can solve my problem. But I cannot find anywhere, so I cannot test it.
So, when Win 8 shuts down, it turns off wireless, am I right? So the other way could be a simple setting to disable the Win8 to turn off the WIFI (and bluetotth, because I have the same problem with it, but I don't care about BT).
Can anybody help me where can I find a driver (AMD autoupdate couldn't help me, either Lenovo System Update), or where can I disable WIFI's turning off (in BIOS it's always on, and in Windows's power management too)?
Thanks!

Acrobat Pro XI and 64 bit Win 8.1 installation problem

When I try to install Acrobat Pro XI on my 64 bit Win 8.1 system it's not able to find some files.
For example: Xtras\AdobePDF\Amd64Vista
If I skip that file, and the others, it says "Installation Failed". If I try to run it I get error 16.
Any suggestions?
Thanks,
Dean

I would run http://labs.adobe.com/downloads/acrobatcleaner.html and delete any Acrobat folders that have been created, then try again. Be sure to log in as the administrator and disable anti-virus when you have problems like this.

Win 98SE Startup Logon Problem

All our Win 98SE had the startup logon problem when we migrated to Cisco 1240AP. Previously, we don't had this problem when we are still using the SMC AP.
When we want to login to windows 2000 Domain during startup, the system will complain that it can't find a DC and we had to click ok to proceed. Once login, we can see that it can detect the AP with good signal strength. Then we need to logoff and then only we can login to the Domain without any problem.
But when we restart the system to login to the Domain again, the same problem occurs. Only when you click ok to login without network and then logoff again to login without restart the system, then the PC can find the Domain and login without problem. All our PCs are using the static IP assignment with DNS and WINS configure.
We are currently using the DLink client wireless adapter and we had try to change to Belkin client wireless adapter with more recent Win98 driver but with the same problem.
Our Window XP don't had this issue. As i had said, previously when we are using a SMC AP, we don't had this problem.
Anyone here had the same problem that had a solution ?
Thanks.
CMYip

Yes. The solution was to upgrade to upgrade the customer's laptops to WinXP.
(Drive mappings were also a related issue).

Archlinux + wine + spotify sound quality problems

Hi,
have installed Spotify on my Archlinux box using Wine. But I am not able to get the same sound quality as in Windows XP. Have tried all kinds of settings in winecfg. Anybody have the same problem or know how to fix this?
Br,
Burra.

burra wrote:
Hi,
yes I tried the settings they suggested. But with emulated the music plays good for some seconds and then it starts jumping for some seconds. It does this all the time.
When I try to run Full it works fine no jumping but instead it has some kind of distorted sound, as being in a metal jar.
I have the possibility to chose ALSA and OSS in winecfg. The sound quality seems to be a bit better if I use OSS. But not as good as in windows.
Any more ideas?
Burra
Try to change your default sound API to OSSv4, it has better sound... way better, because you're not actually using OSS, but instead ALSA's OSS emulation...

Acer aspire V7 win 8.1 update problem

One reason it could be staying at .75 is because it's getting too hot.

After updating windows 8.1, I think that the KB3000850 around 750MB causes problems,
SDD usage goes to 100% for a few minutes when Laptop boots up, there's no freeze or lag, just FAN keeps spining very fast for the time when SSD is at its fullest usage, then SSD usage goes back to 0% but vent keeps randomly spinning up very fast and not constant even there is nothing running ( IDLE ), and sometimes processor locks at min 0.75GHZ and not changing ( don't mention power plan, cos its not working ).
I reverted that update, and there is no SSD 100% usage and there is no strange vent spinning and there is no CPU lock.
Any suggestion how to configure system after WIN update to keep it working normal ?
UPDATE is messing things up....
Thanks in advance guys

Poweredge (Win 2003) port teaming problem with Cat 6509s

Hi
One of our server guys has reported a problem with port teaming his Win 2003 Dell servers (running MS Exchange). He has set them up with an active port attached to 6509-A and a standby port attached to 6509-B. The servers have Broadcom NICs. At times the server is completely unavailable - unable to RDP or telnet and users have complained of poor performance.
Does anyone hae any experience - any info gratefully received.
Regards,
Paul

I'm not so sure CSCsj55739 is the issue. I have a few questions:
1) Can you post a text dump of the Broadcom team config (usually available from the teaming GUI).
2) Are both NICs connected to the same VLAN?
3) Is this same VLAN carried between 6509-A and 6509-B?
4) Have you tried removing the team and putting the team address on one physical NIC at a time, to see if simply one NIC or the other has a connection issue?

Win 8 users having problems?

Prior to getting Win8 I was having difficulty getting Link to back up my phone. Now that I have Win8, LINK is even worse. It crashed the PC & brings up a BSOD with a message about some watch dog violoation thing......... I should add, it does this only when I plug in my phone. Otherwise, I can open Link & it's OK. But if I can't plug in my phone to back up, then what good is LINK? That's right! NO GOOD.
Is there ANYONE who has Link working on WIN8?
Any suggestions on how I get this to work?
(by the way: Win8 is pretty horrid if anyone is considering getting it... Don't say you haven't been warned)

Yes, have been having the DPC-Watchdog-Violation blue screen pretty much every time I leave my Z10 plugged into my computer.
Just recently read a post on CrackBerry I think where they thought it could be a conflict with a bad SD card in the Z10. My SanDisk 64GB SD card is always in my Z so that 'could' be it. Was going to try another SD card to see if that is it.
Though I never had the problem when I was on Win 7 though so no guarantee.
Not sure if BB Link v1.2 provided new drivers for BB 10 phones but if it did, maybe it will reduce the BSOD. Also, it seems that it doesn't happen on WiFi so if you can sync that way, that may be the way to go about it.
And, yes, not too impressed with Win 8. Still using it but hope for better things with 8.1.
BB-past: 9000>9700>9800>9780>9810>9900>Z10>Q5

Iq-816/win​8x64pro/to​uchscreen problems

Similar Messages

Maybe you are looking for

Iq-816/win8x64pro/touchscreen problems