IQ506 Constant lock ups/freezes
Had the computer a little over a year now it started intermittingly freezeing about 3 months after we got it. Some thing I just kinda dealt with. It since then has become more and more frequent, to the point where the only way it wil run smoothly now is if I run it in safe mode with networking so I am able to get one the internet. I sat down last night and figured I would took a crack at it, I wne t through an A+ certification class a while back and am pretty familiar with computers. have run a msconfig and stopped a good bit of startups and that seemed to help a bit but it still freeeze a couple time a hour in normal mode. Have turned the power option to high making the performance better again seemed to help a bit. I also dicovered last night that most of the window updates have failed. I am running windows vista 64 bit SP1. I attempted to install SP2 last night but was unbale. Seemed to have froze up on me mid install. I am almost sure that I am going to go get a external harddrive to backup all my data and do a system restore to factory, than install a new bios. My step daughter is on this thing all the time and i am constantly deleting programs, could this also be a culprit, virus maybe???? I have Norton anti virus installed and it is working fine.
Any suggestions or help anyone could offer would be greatly appreciated. I have been reading other posts and taken some of there suggestions and tried but had no luck
I have the same issue. The computer seems to always 'lock up' in Internet Explorer at random times (but at least several times a day). I can close the program with the task manager but the problem remains; also cannot reboot the computer using the Start button menu. Other programs such as word seem unaffected. When my handy-dandy HP Health Check suggests a critical update and I try to install it, I get the error message: "Error occurred While Handling Message."
In the end I have to hold down the manual power button until the computer shuts down. Then upon restart the problem goes away for awhile until it locks up again.
This may be my last HP computer,,, my old Toshiba Laptop XP runs IE great. Any ideas out there?
Similar Messages
-
Constant lock ups with Leopard!
I find myself having to hold in the power button to turn my computer off almost everyday now! I am not sure what is causing these constant lock ups! Ever since upgrading to Leopard have I noticed this. Yesterday It happened when trying to open iTunes. Today it happened when I clicked on MAIL. The icon just bounces in the dock and nothing happens. I hit FORCE QUIT and that doesn't work either.
Do I need to clear something out or get rid of something? Even when I try to restart my computer sometimes that will lock up too! The only way to get around any of these issues is to hold in the power button to turn the whole computer off, wait a few seconds and turn it back on. Once its back on, then I have full functionality out the computer again but its getting on my nerves that I have to do this all to often!
I think they are some cool features with Leopard but I am experiencing way to many bugs/problems with it to be 100% happy with it.
As I am writing this posting, I just clicked on my APPLE icon in the top left of the screen and then clicked ABOUT THIS MAC to make sure I was using the most current version, and NOTHING happened!Try reinstalling. It sounds like you did an upgrade from an earlier version that may have been corrupt to start with. You may be able to do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
3rd Gen Lock Ups / Freezes during everyday use
My 3rd Gen Click Wheel iPod has developed a freeze issue, where I'll be playing a song and suddenly the ipod locks up and none of the controls respond.
To try and fix this I've restored the ipod, zero formatted the drive (disk utility says all is fine) and then put 2gb of music on it to test.
I still get the same issue arising pretty much every time I use it now. Luckily, more often and not the click wheel doesn't respond, but the buttons at least do and I can re-boot the ipod to get it to respond. When I get totally locked out, I have to wait until it goes into sleep of drains the battery.
Battery life is still good as this is a late 3rd gen model. What gives? This happens to songs encoded by the latest version of itunes as well as older versions. The software is up to date to correct 'bug fixes', but is there a way of forcing the ipod to upgrade its software in case the ipod software has become trashed?
Any help/suggestions please.Well no answers but looks like it could possibly be a disk fragmentation issue. Diskwarrior showed 77% fragmentation of the iPod. Once I set it to work, the iPod changes tracks much more quickly.
Hopefully that's sorted it... -
Lock-ups/freezes - Nvidia GeForce 8600M GT
Hi all, I have been the owner of a MacBook Pro since August or so. My problem is that when working with my MacBook Pro, occasionally the display freezes up. Sometimes it recovers, sometimes the machine refuse to recover. If I listen to iTunes, I hear the music playing on in the background, which indicates that this is an issue with the graphics chip, and not the computer in general.
I have searched the Internet, and it seems I am not the only one who has issues with the Nvidia GeForce 8600M GT. According to slashdot.org, Apple acknowledges that this may be an issue (http://apple.slashdot.org/apple/08/10/11/1518246.shtml).
Have anyone else experienced these kinds of issues, and if you did, how did you solve them?Hello! I am feeling a little more secure now that there have been quite a few posts about the poor preformance of the nVidia cards in the SR Macbook Pros, its comforting to know this isn't an isolated issue. I've gone as far as contacting Apple to let them know of the poor preformance. They've were, as usual, very nice and as helpful as they are allowed to be. Currently, I have a replacment on the way apparently, my original was deemd DOA I believe. However, it seems at the time all we can do is report our issues to Apple. My main concern is the legnth of time these machines have been out, and the amount of units sold to unknowing customers who are being sold on what Apple is marketing as a strong feature of the machines: the graphics card. When in reality, the card is extraordinary, the preformance in OSX is extremely poor. It is up to us as consumers to let Apple know how aggrivated we are.
Please, take the time and send your responses and feelings to Apple. You can do that here:
http://www.apple.com/feedback/macbookpro.html -
E4200 - Multiple issues and constant lock ups.
So I just bought this router today. Initial setup was easy.
Then I tried to add a wireless printer. The router froze up. Had to reboot to get it to work at all. I couldn't even access the default setup pages and Cisco connect couldn't connect either.
After reboot, forgot about the printer and tried to add an external hard drive that works fine on my PC. The router couldn't detect it. Then the router froze again and had to reboot to get anything to work.
The firmware says 1.0.03 build 14 Sep. 20, 2011
I downloaded the latest from the website and tried a firmware update. That failed too and the message was to try again later.
This thing freezes up any time I try to modify anything. Is it a dud? Because so far I am not impressed at all. I had a little more confidence with Cisco up until tonight....Cancruiser wrote:
So I just bought this router today. Initial setup was easy.
Then I tried to add a wireless printer. The router froze up. Had to reboot to get it to work at all. I couldn't even access the default setup pages and Cisco connect couldn't connect either.
After reboot, forgot about the printer and tried to add an external hard drive that works fine on my PC. The router couldn't detect it. Then the router froze again and had to reboot to get anything to work.
The firmware says 1.0.03 build 14 Sep. 20, 2011
I downloaded the latest from the website and tried a firmware update. That failed too and the message was to try again later.
This thing freezes up any time I try to modify anything. Is it a dud? Because so far I am not impressed at all. I had a little more confidence with Cisco up until tonight....
what type of drive? Format is your external hard drive?
Yesterday is history. Tomorrow is mystery. Today is a gift. -
Re: Satellite P300-161 - Random Lock-ups/Freezing
Hi all,
I've had my Toshiba Satellite P300-161 laptop for roughly about 6 months now. However, during the past month or so.. I've been experiencing random freezing of the whole laptop.
It usually just starts off at anytime.. then it'll have a break then start freezing again. When it freezes, it lasts for about 10-15 seconds and everything goes to "Not Responding". Even Ctrl + Alt + Del doesn't load up the task manager until after the freezing stops. However, I've discovered that when it's in its "freeze" mode, where the applications are not responding, I can give the laptop a gentle tap with my hand on the open space area to the right of the touchpad... and it unfreezes.... Surely this is a bad thing.
I plan to take this back to where I purchased it from and have it sent off to Toshiba to get it fixed as I have a 2 year warranty with them IF I can't get help from here.
Much help needed.
Thanks in advance,
Benny Fung.Hi.
Thanks for your reply.
Yeah, it's currently running on Vista SP1. I have reinstalled Vista _once_ for this laptop, perhaps I should reinstall it again before I take it back to John Lewis just to make sure...
I don't think it's overheating, as it can do it at anytime.. for instance, I could just be running Firefox and Messesnger and it still does it and with 3GB of RAM and 2.1Ghz, it should be able to perform simple tasks like that without overheating.
Hmm, What's this air spray cleaner thing you're talking about? How does it work?
Thanks. -
Lock ups, Freezes, black monitors
if your computer is turning itself off, the motherboard is probably overheating. I took the cover off the computer and bought a small fan to blow directly on it and it stopped doing it. I also haven't had a blue screen or hard drive failure since I did this.
Try this bootable memory diagnostic tool:
Download memtest86 iso file and burn it to disk using Imgburn.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
3120 constant lock-ups, restarts and shutdowns
I bought this phone 2 and a half years ago and it has worked flawlessly up until a few weeks ago. It started with random unresponsiveness to keystrockes followed by a quick switching off and on cycle without the whole initialization routine when the device is normally powered on.
The situation has gradually deteriorated to a point where it is impossible to make even a couple keystrokes without the phone restarting or completely shuting down by itself.
I have ruled out the possibility that this due to a bad battery because I used a battery from a new phone and it didn't solve the problem. I also put the old battery to the new phone and it worked without an issue.You need to take this to a service point for the to repair- you probaly will be asked to pay as warranty expired- see web link below
http://www.nokia.co.uk/A4228006
or perhaps it is time to lay the handset to rest
Today Me Tomorrow You -
HI, I thought i might share this with you if you are having lock ups in leopard on a G5 with an ATI X800XT graphics card. I have a G5 2.7 with a fresh install of leopard and with the aforementioned card and was getting constant lock ups which resulted in me having to hard power down constantly.Also you could hear the cards fan revving quite a lot as well. If you go into system prefs and set colours to thousands in stead of millions then the constant locking up will stop. ATI and apple need to address this ASAP! But for now its a workaround. Hope this helps
I assume you tried all teh usual voodoo - reset NVRAM, performed AHT etc?
If you need a working system then I'd suggest you restore back to Tiger from your backups and then call Apple.
You could install a small Leopard test partition and have them walk you through troubleshooting steps.
It may be a Leopard driver issue or could be that your system has a real hardware problem.
Good Luck. -
Disgusted with HP Elite m9280a constant/random freezes, lock ups, BSOD, black screen
constant/random freezes, lock ups, BSOD, black screen.
I have been trying to trouble shoot this PC for almost a day now. weird problems like when 3 sticks of memory is present it wil not boot but it will boot on 1 and on 2 sticks will have hangs?
disappointed tot the max... u think HP TOTAL CARE - u pay extra thinking u are going to get a decent system...
i have run diagnostics on all major components... still no luck
someone please help - i have never spent sooo much time trying to repair a pcTry this bootable memory diagnostic tool:
Download memtest86 iso file and burn it to disk using Imgburn.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Constant stream of lock ups with Lion 10.7.2
At my wits end since upgrading to Lion (10.7.2). I get a constant stream of application lock ups (beach ball) on every app I try: Firefox (8.0.1) , intermitent connectivity to Internet (although I know my connection is good); App Store unable to connect; iTune unable to connect to store; Parallels Desktop locks up; Outlook (Office Mac 2011) locks up, Time Machine locks up, and more not mentioned. None of these seem to occur at the same time; it's more like the app that decides to not work is random. Firefox is good but App Store will not connect; iTunes is good, but Firefox will not connect.
Each time I'm forced to restart or shutdown only to have similar, but not the same, errors after I log back on. The errors (lock ups) started right after the upgrade and have gotten progressively worse as the days/weeks go by. At the point now where the PC is completely unreliable. It's a crap shoot to find out what is working and what is not.
I've tried about everything mentioned in the forums -- verified/fixed permissions, used Mac OS install DVD to verify/fix HDD issues; no help.
Prior to upgrade, I had zero issues running SL -- all of this started with Lion.simon57 wrote:
In any case, shouldn't Software Update recognise what I am running and what is needed to update it successfully?
To a point. It will inform you of a system update, as with Lion 10.7.2 for example, but that is not the combo update. I set my Systum Updates to install manually, if I see an OS update, I always go to
http://support.apple.com/downloads/
And choose the Combo update whice is always a little bigger, but a cumulative install as mentioned. Always appears to be more stable.
Cheers -
P45 Neo3-FR Freezing/lock ups in Windows
Specs:
P45 Neo3-FR using 1.3 BIOS
E8400 w/ Thermalright Ultra 120 Extreme
2x1GB GSkill 1066Mhz RAM
EVGA 8800GT 512MB
Cosair HX520W PSU
Antec Nine Hundred case
2x SATA HDD
1x DVDRW
Windows XP SP3
I'm having random freezing/lock ups in Windows. It can happen anywhere between 1 minute to 5+ hours. It's completely random, doesn't matter what I'm doing.
I have the latest chipset and nVidia drivers.
Memtest passes 8+ hours
Orthos passes 3+ hours
I've cleared the CMOS and loaded optimized defaults
I've tried both IDE and AHCI
What happens is everything just freezes, I can't move the mouse and can't ctrl-alt-del.
Anyone have any ideas?
Update: I switched to BIOS 1.2 and so far everything seems OK, though I lost the option to change the command rate on the RAM. I'll post back in a couple of days or if it happens to lock up again.Quote
2x1GB GSkill 1066Mhz RAM
Reduce memory clock speed to 800 MHz in BIOS, set Memory voltage to 1.9-1.95V and retest. -
Multiple Panics, Lock Ups and Freezes
My MacBook Pro running 10.8.3 has been having some random shut downs and lock ups lately, the latest of which took the internal boot drive totally offline. I was able to recover it after booting to my external recovery drive and running DiskWarrior 4 as Disk Utility simply said I needed to repair the drive before mounting it, but then said it was unrepairable after attempting to do so.
After the DiskWarrior repair, the Mac booted from it's internal drive like there was nothing wrong, but an hour or so later, I had another lock up where everything froze up and was unresponsive and then after a restart I got another hour or so before it shut itself down and then restarted itself, so I'm obviously less than thrilled with the situation.
This is the factory drive which came with the MacBook Pro when purchased new in January of this year, so I have a hard time believing the drive is physically bad, though I guess anything is possible. Another thing that has me thinking it's not the hardware is that the machine runs fine when booted to the external recovery drive and has no errors or any of the symptoms I've been experiencing.
Anyway, I've been looking at the panic reports, but I'm honestly not well versed in what any of this means, so I'm hoping one of the experts can chime in and maybe point me in the right direction as I'm running out of ideas :/
Interval Since Last Panic Report: 2467 sec
Panics Since Last Report: 1
Anonymous UUID: BBC20339-6AE8-82EA-4368-DCBBCC912FF4
Anonymous UUID: BBC20339-6AE8-82EA-4368-DCBBCC912FF4
Thu May 2 13:44:42 2013
panic(cpu 6 caller 0xffffff8025cb7e95): Kernel trap at 0xffffff7fa741c064, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x00000000443ae021, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0xffffff81c60a6000, RCX: 0xffffff8048c44000, RDX: 0xffffff81f7773a38
RSP: 0xffffff81f7773b60, RBP: 0xffffff81f7773b60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff81c60a6000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7fa741c064, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff81f7773800 : 0xffffff8025c1d626
0xffffff81f7773870 : 0xffffff8025cb7e95
0xffffff81f7773a40 : 0xffffff8025ccd4dd
0xffffff81f7773a60 : 0xffffff7fa741c064
0xffffff81f7773b60 : 0xffffff7fa7405d64
0xffffff81f7773bb0 : 0xffffff7fa7405cba
0xffffff81f7773bd0 : 0xffffff7fa73e17ae
0xffffff81f7773c00 : 0xffffff7fa62b03a0
0xffffff81f7773c40 : 0xffffff7fa62b030f
0xffffff81f7773c60 : 0xffffff7fa62b575c
0xffffff81f7773cf0 : 0xffffff7fa62ade50
0xffffff81f7773d20 : 0xffffff7fa62feb8b
0xffffff81f7773d70 : 0xffffff8026032e7b
0xffffff81f7773dc0 : 0xffffff80260634f7
0xffffff81f7773e30 : 0xffffff8025c97fef
0xffffff81f7773e80 : 0xffffff8025c20aed
0xffffff81f7773eb0 : 0xffffff8025c10448
0xffffff81f7773f00 : 0xffffff8025c1961b
0xffffff81f7773f70 : 0xffffff8025ca5dd6
0xffffff81f7773fb0 : 0xffffff8025ccdd43
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000->0xffffff7fa62dbfff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7fa62fb 000->0xffffff7fa6608fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7fa62e7000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000
com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7fa73de000 ->0xffffff7fa74aafff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7fa62 fb000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7fa62e7000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: 0x0000000025a00000
Kernel text base: 0xffffff8025c00000
System model name: MacBookPro9,1 (Mac-4B7AC7E43945597E)
System uptime in nanoseconds: 187720354206
last loaded kext at 185678984299: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7fa768f000, size 32768)
loaded kexts:
com.kaspersky.nke 1.0.1d41
com.kaspersky.kext.klif 3.0.0d23
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.1.3f3
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.12.87
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.7fc4
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.GeForce 8.1.0
com.apple.iokit.IOBluetoothUSBDFU 4.1.3f3
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.nvidia.NVDAStartup 8.1.0
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AppleIntelHD4000Graphics 8.1.0
com.apple.driver.AppleIntelFramebufferCapri 8.1.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.3.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMuxControl 3.3.0
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyEventDriver 237.1
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.driver.AppleSDXC 1.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.0b1
com.apple.driver.AirPort.Brcm4331 614.20.16
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBXHCI 5.5.5
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.nvidia.gk100hal 8.1.0
com.apple.NVDAResman 8.1.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.9
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.iokit.IOAcceleratorFamily 30.14
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.3f3
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.AppleGraphicsControl 3.3.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.driver.AppleThunderboltNHI 1.6.3
com.apple.iokit.IOThunderboltFamily 2.2.6
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 522.4
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBFamily 5.5.5
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
System Profile:
Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.1f173
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 8
Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.1f173
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 81. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to bypass Apple's oversight, or the oversight could fail in a particular case due to human error.
For most purposes, applications recognized by Gatekeeper as signed, including App Store products, can be considered safe. Note, however, that at least one trojan for iOS (not for OS X) was briefly distributed by a developer in Russia through the iTunes App Store. That store is under the same oversight by Apple as the Mac App Store, so the protection shouldn't be considered absolute. App Store products may prompt for access to private data, such as your contacts. Think before granting that access. OS X security is based on user input. Never click anything reflexively.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. Beyond XProtect, Gatekeeper, and MRT, there’s no evidence of any benefit from other automated protection against malware. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you never use software that comes from an untrustworthy source, or that does something inherently untrustworthy. How do you know what is trustworthy?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are in this category, though not all are necessarily harmful.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
Even signed applications should not be trusted if they do something unexpected, such as asking for permission to access your contacts or your location for no apparent reason.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
8. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
ClamXav may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use ClamXav unless a network administrator requires you to run an anti-virus application.
9. The greatest harm done by security software, in my opinion, is in its effect on human behavior. It does little or nothing to protect people from emerging threats, but if they get a false sense of security from it, they may feel free to do things that expose them to higher risk. Nothing can lessen the need for safe computing practices.
10. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default. -
Hi!
I recently got my hands on a second hand tecra 9100. I got it free since the previous owner complained about random lock ups or freezes. As i've testaed the laptop myself i experienced this aswell. It can freeze just about anytime but i've never had it running flawlessly for more than 20 minutes i recon. Sometimes it also refuses to start up. I do not know if this is a lock up in the initial startup sequence.
Anyway it will lock up even in bios and i have dissassembled it and put it back together, replaced the RTC battery (with a non rechargable) and removed any hardware not crucial for useage (i.e WiFi card, extra RAm modules, modem card).
I'm clueless, anyone got any idea of what to try next?
Regards SimonI think you cant fix it by yourself
In your case the ASP should check the notebook and if necessary replace the faulty part/device. -
Total lock-ups with fan running - translate system.log file please!?
Hi, all. My late 2005 2.3 gig dual G5 has been experiencing random lock ups for as long as I can remember. My system is up to date and I have tested each pair of the 5 gigs of ram that I have and the system freezes with each pair. It can happen at any time, when I am doing absolutely nothing, for example, overnight. I am at my wits end!
Here's the system log file for the latest freezes. Can anyone tell me what's going on here??? I really need to get to the root of this problem. Thanks so so much in advance.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/Macintosh HD failed 89.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Macintosh HD, flags 524288, pid 62
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This service performs licensing functions on behalf of FLEXnet enabled products.\n
Apr 12 18:01:06 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:01:49 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:08:29 Marc-Weinbergs-Computer diskarbitrationd[69]: SDCopy [1056]:36091 not responding.
Apr 12 18:16:18 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:16:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 19:24:12 Marc-Weinbergs-Computer ntpd[191]: time reset -0.650307 s
Apr 13 01:05:45 Marc-Weinbergs-Computer ntpd[191]: time reset -0.496917 s
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 07:15:03 Marc-Weinbergs-Computer postfix/postqueue[1778]: warning: Mail system is down -- accessing queue directly
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 15:53:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 15:53:54 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 22:15:48 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 13 22:15:47 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[63]: starting
Apr 13 22:15:48 localhost kernel[0]: vmpagebootstrap: 506550 free pages
Apr 13 22:15:47 localhost memberd[70]: memberd starting up
Apr 13 22:15:49 localhost kernel[0]: migtable_maxdispl = 70
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.FTATASil3132E" from archive.
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.Sil3112DeviceNub" from archive.
Apr 13 22:15:49 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 13 22:15:49 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 13 22:15:49 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Apr 13 22:15:49 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Apr 13 22:15:49 localhost kernel[0]: DART enabled
Apr 13 22:15:47 localhost DirectoryService[75]: Launched version 2.1 (v353.6)
Apr 13 22:15:49 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe1b4c7e; max speed s800.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:48 localhost lookupd[71]: lookupd (version 369.5) starting - Sun Apr 13 22:15:48 2008
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: Extension "com.microsoft.driver.MicrosoftKeyboardUSB" has no kernel dependency.
Apr 13 22:15:49 localhost kernel[0]: AppleSMUparent::clientNotifyData nobody registed for 0x40
Apr 13 22:15:49 localhost kernel[0]: Security auditing service present
Apr 13 22:15:49 localhost kernel[0]: BSM auditing present
Apr 13 22:15:49 localhost kernel[0]: disabled
Apr 13 22:15:49 localhost kernel[0]: rooting via boot-uuid from /chosen: 82827EDF-0263-3B93-BEED-4B114E820B85
Apr 13 22:15:49 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 13 22:15:49 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3320620AS Media/IOApplePartitionScheme/AppleHFS_Untitled1@10
Apr 13 22:15:49 localhost kernel[0]: BSD root: disk0s10, major 14, minor 12
Apr 13 22:15:49 localhost kernel[0]: jnl: replay_journal: from: 8451584 to: 11420160 (joffset 0x952000)
Apr 13 22:15:50 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Apr 13 22:15:50 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x67, SDB vers = 0x01,
Apr 13 22:15:50 localhost kernel[0]: HFS: Removed 8 orphaned unlinked files
Apr 13 22:15:50 localhost kernel[0]: Jettisoning kernel linker.
Apr 13 22:15:50 localhost kernel[0]: Resetting IOCatalogue.
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 3
Apr 13 22:15:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::start 1
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::end 1
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
Apr 13 22:15:50 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:78
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:79
Apr 13 22:15:51 localhost lookupd[86]: lookupd (version 369.5) starting - Sun Apr 13 22:15:51 2008
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 21611008 to: 7857152 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 673280 to: 24382976 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 3890176 to: 6294016 (joffset 0x7d01000)
Apr 13 22:15:51 localhost diskarbitrationd[69]: disk0s10 hfs 82827EDF-0263-3B93-BEED-4B114E820B85 NewestSeagate /
Apr 13 22:15:52 localhost kernel[0]: NVDA,Display-A: vram [90020000:10000000]
Apr 13 22:15:52 localhost mDNSResponder: Adding browse domain local.
Apr 13 22:15:53 localhost kernel[0]: hfs mount: enabling extended security on Maxtor
Apr 13 22:15:53 localhost diskarbitrationd[69]: disk1s3 hfs 0DBE2113-B1F5-388F-BF70-2E366A095330 Maxtor /Volumes/Maxtor
Apr 13 22:15:54 localhost kernel[0]: NVDA,Display-B: vram [94000000:08000000]
Apr 13 22:15:54 Marc-Weinbergs-Computer configd[67]: setting hostname to "Marc-Weinbergs-Computer.local"
Apr 13 22:15:54 Marc-Weinbergs-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 13 22:15:56 Marc-Weinbergs-Computer diskarbitrationd[69]: disk2s3 hfs 971CABB3-C211-38FC-8E91-6B4F8EA5FA20 B08-09-07 /Volumes/B08-09-07
Apr 13 22:15:56 Marc-Weinbergs-Computer loginwindow[110]: Login Window Started Security Agent
Apr 13 22:15:57 Marc-Weinbergs-Computer kernel[0]: AppleBCM5701Ethernet - en1 link active, 1000-Mbit, full duplex, symmetric flow control enabled
Apr 13 22:15:57 Marc-Weinbergs-Computer configd[67]: AppleTalk startup
Apr 13 22:15:57 Marc-Weinbergs-Computer TabletDriver[119]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:15:59 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:01 Marc-Weinbergs-Computer lookupd[123]: lookupd (version 369.5) starting - Sun Apr 13 22:16:01 2008
Apr 13 22:16:01 Marc-Weinbergs-Computer kernel[0]: HFS: Removed 2 orphaned unlinked files
Apr 13 22:16:01 Marc-Weinbergs-Computer diskarbitrationd[69]: disk3s3 hfs CDA8BCC5-0CE4-33E8-A910-4B0952DBC230 FullBU-09-07 /Volumes/FullBU-09-07
Apr 13 22:16:04 Marc-Weinbergs-Computer configd[67]: target=enable-network: disabled
Apr 13 22:16:05 Marc-Weinbergs-Computer configd[67]: AppleTalk startup complete
Apr 13 22:16:09 Marc-Weinbergs-Computer TabletDriver[237]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: exited with exit code: 253
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: 9 more failures without living at least 60 seconds will cause job removal
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0L6LR', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0L6LR', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0LGS4', reports it is functioning at a temperature of 100.4F (38C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0LGS4', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '9RV000FC', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '9RV000FC', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', reports it is functioning at a temperature of 89.6F (32C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', appear to still be available. (Total Available: 63) (Use Attempts: 0)
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
etc.Hi-
The machine seems to be having trouble with loading certain drivers, but, as this isn't a crash log, and doesn't show the "hang-up" or freeze, it's hard to tell.
Noted possibilities are:
-Microsoft keyboard (possible USB power problem)
-firmtek driver (from archive) questionable due to the "archive" annotation
-Wacom tablet driver, causing system problems
Running in Safe mode without freezes would help to determine if one of these drivers is the problem.
Other possibilities are outdated drivers, or simply a need to reinstall the OS.
If unnecessary, removing the driver(s) would be a good idea.
External USB and Firewire devices are all suspect, should all be disconnected, revert to Apple keyboard, and test system performance. Adding one device at a time, and testing each will be necessary to clear each device.
I have experienced system trouble when a Wacom tablet was not connected, but the driver was left installed.
Disabling the driver from Startup items may be necessary to test without the Wacom tablet connected.
Maybe you are looking for
-
Creating new cluster - Unable to create the cluster entry
I'm trying to create cluster in a newly installed iAS 6.0 SP2. I fill out the form at /Administrator.apm and after submitting, cluster creation fails at "Adding the cluster entry in the configuration directory". I created a new slapd instance for thi
-
Oracle SQL query for getting specific special characters from a table
Hi all, This is my table Table Name- Table1 S.no Name 1 aaaaaaaa 2 a1234sgjghb 3 a@3$%jkhkjn 4 abcd-dfghjik 5 bbvxzckvbzxcv&^%# 6 ashgweqfg/gfjwgefj//// 7 sdsaf$([]:' 8 <-fdsj
-
Lost album covers from amazon and not itunes store?
lost some of my album covers since transfer of library to new computer. how do i get it back as some music was purchased through amazon and not itunes store?
-
Hi there, after updating to Yosemite the Finder does not show anymore office docs in recent history. Everything else ist displayed properly. I can see recent used apps or files but not the word files (which i use mostly) Any idea? Thanks :=)
-
How to convert nagative integer to positive integer.
int i= (int)System.currentTimeMillis(); System.out.println(i); The result is nagative such as; -585450145 How to convert nagative integer to positive integer.