IQ770 blue screen of death safe mode limited won't run

i turned on my comp the other day and got a blue screen of death. it let me enter my computer under a non-admin login in safe mode. i was unable to solve the problem without the computer flashing several more screens and then turning off. i was able to start it up again without the blue screen of death appearing again however it wouldn't run in anything but safe mode. now i cannot even do that so i tried a system restore and it takes me thought the process but in the screen where it shows you what drives will be restored it only has one box checked out of the three it lists. only my main drive. after i click on it to restore and i have now tried to restore a few times it doesn't working saying it was unable to restore my comp to the selected point. please help!!

For the IQ700 series
If you're running Windows Vista SP2, there is a patch for USB patch for NVIDIA chipsets
http://support.microsoft.com/kb/975163/
If you're running Windows 7, install this patch
http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...

Similar Messages

BLUE SCREEN CAN'T SAFE MODE WON'T WORK

I HAD THE SAME THING HAPPEN TO ME BUT I NEVER DELETE NO FILES AND PUT IN THE MAC OS X INSTALL DISC 1 OF 2 AND A BLUE SCREEN IS NOW HERE AND IT TELLS ME I CAN'T INSTALL ON THIS VOLUME WITH AN ! AND PICTURE OF HARD DRIVE ALSO WITH AN @% IT STARTS AS IF IT GOING TO HOME SCREEN THEN IT GO TO THE BLUE SCEEN THING IT WON'T GO INTO SAFE MODE THE MOST I CAN DO IS GO MAC UPDATES THEY I CAN USE INTERNET HOW DO I FIX THIS CAN I BUY AN NEW HARD DRIVE AND STILL GET MY PICTURES AND MUSIC ON TO THE HARD DRIVE AGAIN I TRY TO HOLD DOWN OPTION IT DONT WORK

WHAT HAPPEN IT WAS TELLING ME THAT THE START UP DISC WAS FULL TO DELETE FILE TO MAKE ROOM

J2SE Runtime V5 Update 6 = Blue screen of death.

Hi,
My Windows XP Home (with SP2) has recently installed the Update 11 as one of the local Admin and started crashing.
So, I started uninstall using "Add Remove Program" to remove Java Update one at a time started from Update 11 to lower number.
By Update 6, I consistently getting blue screen of death and the uninstall won't finish.
How can I gracefully remove Java Update 6 and J2SE? I've tried Safe Mode and didn't work.
I've chkdsk and analysis the disk and both reported fine.
Thanks.

Hi I had the same trouble and used system restor to fix it and im not reinstalling java till they fix it. Havnt had a blue screen sence i restored the computer to the date just befor i installed java.

NI Raptor Runtime: Blue screen of death

Hi
We've suffered two blue screens of death on a Windows 8 system running LabView code in the last couple of months. The event logs show the cause to be the NI Raptor Runtime driver. We are running LabView 2012 SP1 with all critical updates installed. Are there any known issues with this driver?
Best regards,
Chris

Hi Robert
Thanks for your reply. I resinstalled and updated all of the National Instruments software on the machine this week so the DAQmx version should be up-to-date. I've pasted the versions below. We experienced another blue screen within a day of the reinstall/update though.
With regards to the code, it isn't mine so I don't know it inside out. However, the general architecture is a flat sequenece in a while loop. The total loop rate is around 1-3Hz. Within individual frames of the sequence, analogue and digital input tasks are created, run, stopped and cleared in series on each loop iteration. Individual frames may not have rate limiting timers, so a create may happen quite quickly after a clear. State changes on the front panel can cause certain frames to create and run digital output tasks that change the value of output lines, however no front panel interaction was performed within at least a few hours of any of the crashes.
Do you think that it would be worth placing a frame-rate-limiting timer into the code, to reduce the rate at which tasks are stopped and started?
Best regards,
Chris
National Instruments Software: Version:
CVI Run-Time 10.0.1.434
NI-DAQmx Device Driver 14.2.0f1
NI-DAQmx ADE Support 14.2.0
NI-DAQmx MAX Configuration 14.2.0
NI Script Editor 1.3.4
NI-DMM 3.0.5
DMM Soft Front Panel 3.0.5
NI-FGEN 2.8.1
FGEN Soft Front Panel 2.7
NI-488.2 Software 2.81
NI I/O Trace 14.0.0f0
IVI Compliance Package 4.4
LabVIEW Run-Time 2010 SP1 10.0.1
LabVIEW Run-Time 2009 SP1 (64-bit) 9.0.1
Measurement & Automation Explorer 14.0.0f0
Measurement Studio Visual Studio 2010 Support - See individual versions below.
DotNET
Common 13.0.40.190
Common (64-bit) 13.0.40.190
NI-USI 2.0.0.4901
NI-DCPower 1.6.1
NI-DCPower Soft Front Panel 1.6.1
NI-HSDIO 1.7.5.1
NI-HWS 1.4.9
NI PXI Platform Services Configuration 14.0.0f0
NI PXI Platform Services Runtime 14.0.0f0
NI-RFSA 2.4.5
NI-RFSA Soft Front Panel 2.4
NI-RFSG 1.7.2
NI-PAL Software 14.0.1
NI-SCOPE
Configuration Support 3.8.5
Development Support 3.8.5
Run-Time 3.8.5
SCOPE Soft Front Panel 3.8
LabVIEW SignalExpress 6.0
NI-SWITCH 4.3.5f0
Soft Front Panel 4.3.5.49152
NI System Configuration 14.0.0f0
NI-TClk 1.9.1
NI-VISA 5.2
NiVisaServer.exe 5.1.0.49152
NIvisaic.exe 5.1.0.49152
NI-VISA Runtime 5.2
LabVIEW 12.0.1
LabVIEW Run-Time 2011 SP1 f2 11.0.1
LabVIEW Run-Time 2012 SP1 f9 12.0.1
LabVIEW Run-Time 8.2.1 8.2.1
LabVIEW Run-Time 8.5.1 8.5.1
LabVIEW Run-Time 8.6.1 8.6.1
LabVIEW Run-Time 2009 SP1 9.0.1

Blue Screen of Death when calling skype on iphone/...

Every time i call a person on skype on iphone or s6 (i think any smartphone) my computer crashes and causes blue screen of death. i have windows 8.1 running and this also happened on win 8. i have tried uninstalling, clean installing, deleting all old files of skype and then installing but nothing has worked.
on aside, when i get a call from another desktop skype as well, invariably, i cant connect the call at first attempt. clicking on accept does nothing and it will continue rining. even clicking on reject does not work after. the only option is to kill skype from task manager and then restart it. it then works fine for first call i make. it then has similar issue on later calls. not neccessarily the 2nd call. its regular but also random in nature.
i have not idea what is the problem. do you?
skype version 7.5.0.102
here is the summary of BSoD last night
Fault bucket AV_rtsuvc!Unknown_Function, type 0
Event Name: BlueScreen
Response: http://wer.microsoft.com/responses/resredir.aspx?sid=10&Bucket=AV_rtsuvc!Unknown_Function&State=1&ID...
Cab Id: 820ea6ec-6de2-4d12-bd98-0fdae73a883d
Problem signature:
P1: 50
P2: ffffe000ef655ff8
P3: 0
P4: fffff800e54fc0c0
P5: 0
P6: 6_3_9600
P7: 0_0
P8: 768_1
P9:
P10:
Attached files:
C:\Windows\Minidump\061315-85671-01.dmp
C:\Users\Madhvendra\AppData\Local\Temp\WER-220125-0.sysdata.xml
C:\Windows\MEMORY.DMP
C:\Users\Madhvendra\AppData\Local\Temp\WER2DD3.tmp.WERInternalMetadata.xml
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_50_a9ac997f524f3a2a4a3ec8b634fedacf174d_00000000_cab_15346984
Analysis symbol:
Rechecking for solution: 0
Report Id: 061315-85671-01
Report Status: 0
Attachments:
BSoD 14 June 15.zip ‏10 KB

Your Realtek camera drivers are crashing. Make sure you have the latest drivers installed for your video card and camera. If the problem continues to occur update the camera drivers to the generic Microsoft camera drivers that come with the OS. Steps on how to update to those drivers are covered in the below graphic:

Blue Screen of Death when calling skype on iphone/s6

Every time i call a person on skype on iphone or s6 (i think any smartphone) my computer crashes and causes blue screen of death. i have windows 8.1 running and this also happened on win 8. i have tried uninstalling, clean installing, deleting all old files of skype and then installing but nothing has worked. on aside, when i get a call from another desktop skype as well, invariably, i cant connect the call at first attempt. clicking on accept does nothing and it will continue rining. even clicking on reject does not work after. the only option is to kill skype from task manager and then restart it. it then works fine for first call i make. it then has similar issue on later calls. not neccessarily the 2nd call. its regular but also random in nature. i have not idea what is the problem. do you? skype version 7.5.0.102here is the summary of BSoD last night Fault bucket AV_rtsuvc!Unknown_Function, type 0
Event Name: BlueScreen
Response: http://wer.microsoft.com/responses/resredir.aspx?sid=10&Bucket=AV_rtsuvc!Unknown_Function&State=1&ID=820ea6ec-6de2-4d12-bd98-0fdae73a883d
Cab Id: 820ea6ec-6de2-4d12-bd98-0fdae73a883dProblem signature:
P1: 50
P2: ffffe000ef655ff8
P3: 0
P4: fffff800e54fc0c0
P5: 0
P6: 6_3_9600
P7: 0_0
P8: 768_1
P9:
P10:Attached files:
C:\Windows\Minidump\061315-85671-01.dmp
C:\Users\Madhvendra\AppData\Local\Temp\WER-220125-0.sysdata.xml
C:\Windows\MEMORY.DMP
C:\Users\Madhvendra\AppData\Local\Temp\WER2DD3.tmp.WERInternalMetadata.xmlThese files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_50_a9ac997f524f3a2a4a3ec8b634fedacf174d_00000000_cab_15346984Analysis symbol:
Rechecking for solution: 0
Report Id: 061315-85671-01
Report Status: 0

Your Realtek camera drivers are crashing. Make sure you have the latest drivers installed for your video card and camera. If the problem continues to occur update the camera drivers to the generic Microsoft camera drivers that come with the OS. Steps on how to update to those drivers are covered in the below graphic:

Blue Screen of death - now can't load Windows (even in safe mode)

Last night laptop (Satellite L500 19Z; Win 7 64 bit) crashed whilst playing CIV4. Got a blue screen of death; before I had chance to read any of the error messages on it the machine rebooted.
It loaded windows in safe mode fine then, and informed me as it had loaded safe mode OK the problem will be related to some recently installed software and I should uninstall programs I'd installed until it would load normally. As it was late last night I shut down and thought I'd sort it in the morning (in retrospect this may have been a mistake ....).
Today, when the machine tries to boot up it attempts a Startup Repair; unfortunately this fails every time and it says "Startup repair has tried several times but still cannot detemine the cause of the problem"
I looked at the log it produces but it passes all the individual tests.
I also can't access the advanced options for system recovery & support, which appears on the Startup Repair dialog box as it demands I be logged in, which apparently I'm not (presumably as the machine never got to the windows login screen before trying the startup repair). The error message reads "you must be logged in to access system recovery options. If you are having trouble logging in please contact your computer administrator for assistance. please click OK to restart the computer."
I've had a go at booting into the various advanced options (safe mode, safe mode with command prompt etc. but the outcome is the same).
I also tried the Repair your Computer option from the advanced boot options screen, but after the screen where it asks you to choose the language and keyboard, I get the same login error mentioned above.
Is there a way to repair or even run the hard disk based windows recovery (haven't got the recovery DVD with me as I'm away from home for a couple weeks) without logging into windows? I would have expected there to be but have yet to figure out how to do it.
(there are no disks in the disk drive, no other devices attached to the laptop - I've tried it with mains power and with the battery and have not noticed any differences)
Thanks
James

Normaly the reinstall data is on a separate part on your HD, not in Windows.
The register is only used for Windows.
If it doesn't work you can always try to reinstall from a DVD later.
It does mean all your data on C:\ will be gone. If you can hook your HD on an other PC you can try to safe your work with a recover prog.

Blue Screen of Death - only safe mode fully boots

Here's a question for speculation. My iMac G5 (ALS) will not boot up past the blue screen of death, except in safe mode. I've reset the PRAM, I've attempted Verbose Mode (but don't know what I'm reading there). I've attempted booting from the Leopard Installation Disk and from a firewire external drive with Leopard and Tiger installed on it. All I ever get is the blue screen and spinning beach ball. If can't boot from the optical drive, then I can't do an archive and reinstall. I used Tech Tool Pro Deluxe to do everything except a surface scan of the Hard Drive and everything passed (I couldn't find my apple hardware test disk).
The good news is that my data is backed up and I'm still covered by Applecare. I turned it in to the Genius Bar this morning and they had no idea what to do either (Hopefully they have a Genius Bar of their own). At this point the debate is simply academic. What do you think went wrong?

The drive may have been intact , but the main memory would have been replaced by the new board, so the old info would be gone. Look at [this|http://en.wikipedia.org/wiki/Motherboard].
Hope all continues well,

When I open FireFox i get the blue screen of death and then vista restarts. I get to login and then afterthe welcome window it crashes and restarts again. I can open in safe mode but if I open firefox again it restarts this loop.

The other day I opened firefox after the latest update in September. Firefox then closes and then i get logged off and vista(32 bit) restarts. I get back to login and when I try to login it gives me the blue screen and restarts again with the selection screen (start in safe mode....)I was able to login on safe mode and then on admin afterwards. Thinking the problem was just an error I went back and opened firefox on my account and the loop started again. I was forced to remove firefox but I want ti back and I want to know how this can be fixed so I can put it back on my computer.

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

Windows Vista Crashing When Ipod is Plugged In. Blue Screen of Death?

A week ago, my computer suddenly started to reboot whenever I plugged my 5th generation 80 gig Ipod in to sync. A blue screen will pop up, and automatically restart.
I do not believe this is the blue screen of death that appeared 2 months ago. I have upgraded to Itunes 8.0.1 when it was first released, and I had no problems until a week ago. I haven't heard of anyone receiving the blue screen of death since the update to Itunes 8 was released.
I have also lost all of my music from my Ipod, so I am anxious to figure this out.
Here is what the blue screen (certain passages paraphrased, the specifics were copied directly):
A problem has been detected and windows has shut down to prevent damage to your computer.
BADPOOLHEADER
If this is the firs time you've seen this stop error screen, restart yoru computer. If this screen appears again, follow these steps:
Make sure all hardware and software is properly installed
If it continues, disable/remove any newly installed hardware and software. Disable BIOS memory options such as caching or shawoding. If you need to use safe mode to remove or disable components, restart your computer, press F8 for Advanced Sartup options, then select safe mode.
Technical information:
*STOR: 0x00000019 (0x00000020, 0xB7C4CE50, 0Xb7C4CE68, 0x0A030203)
/end blue screen
Any help you have would be greatly appreciated!

Have you tried the troubleshooting advice in this article?
http://support.apple.com/kb/TS1502
Was a file name mentioned in the stop message? usually something.sys That can be a clue to the problem is the Apple advice doesn't help.

Blue Screen of Death When opening iTunes.

I am at a loss. For the past six months I have been trying to figure out why my computer has a blue screen of death and then restarts "nearly" everytime i open iTunes. The "nearly" is what's driving me nuts because every once in a while it will open ONCE and then start crashing again. I don't even do anything to help it open it just miraculously works every now and then. It even craches the comp when starting iTunes in safe mode. The blue screen error says "Page Fault in non-paged area". iTunes worked fine for months before this randomly started happening. I have tried every solution I have seen, even ones that weren't for my problem. So far I have:
Manually uninstalled iTunes and QT and reinstalled the standalone QT then iTunes.
Disabled itunes helper and ipod service before starting.
Disabling all other services and start-up items.
Installed current bios and drivers (as far as I can tell)
Installed current windows installer.
Updated microsoft products including .net
Updated Java runtime environment
Replaced ram
I have a pentium 4 1.6ghz with soyo mobo and a RAID card(mirrior) set-up. 1 gig of pc133 ram. I can ul the minidump if needed.
I figured out how to load my podcasts on my ipod manually but I want to get a video ipod so I need itunes. PLEASE HELP!!
Windows XP

there's a few more things worth checking on. but let's also capture a minidump of the crash and send it to someone who can interpret minidumps.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
send it to this email address
in the email, put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b

Blue screen of death when connecting ipod or running itunes

Please help me, I get the blue screen of death and its down to my itunes/ipod i think.
Uninstalled Itunes (tried doing this in safe mode but it wouldnt let me saying you cant do this) and re-installed it but when try to use it (ipod not connected) my screen either freezes a few moments later or the BSOD appears.
Ive ran a windows disk check and a system mechanic 7 one as well, a few folk on here have said my ipod might need reset but this is happening without the Ipod connected so is still an issue?
My ipod seems to be working fine, obviously i cant even access itunes to reset it or see its status.
Any help would be greatly appreciated.

Have you tried this?
http://support.apple.com/kb/TS2280
CG

Blue screen of Death - Windows Vista

Hello,
My HP Pavillion has died - or maybe is just dying. I forced a shutdown yesterday because it froze completely. Now, it will not restart. When I start it, it gives me the black screen where it "scans" everything because it found some "fatal error" (drama queen much?) and then gives me my sign in screen, I sign in, and then I get a BLUE SCREEN where it informs me it is shutting down again (without even asking how I feel about it. HOW RUDE.)
Anyway, it shuts off, turns itself back on (goodness knows I'M not doing it) and then - the black screen checks my disc space again, sign in screen, blue screen, shuts down - you get the point ,it's an endless cycle.
Oh also, my keyboard is not working. The mousepad works, although only to move the cursor (I can't actually click on anything, which as of this morning, makes even signing in impossible.)
Is there any hope?
Thank you.

HI leetasee,
Sorry to hear about the Blue Screen of Death (BSOD) that you are getting. What is the error message that you are getting with the BSOD? A BSOD can either be caused by software or hardware. Let's see if you can check the computer for hardware failures using the HP Diagnostic Tools. Below I have included a link on how to use the tools. You can use them from the boot menu, run the System Test – Extensive.
Testing Hardware Failures Windows Vista:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01443317&lc=en&jumpid=reg_r1002_us...
Something else to try is see if you can boot into safe mode.
Start your computer in safe mode:
http://windows.microsoft.com/en-ca/windows/start-computer-safe-mode#start-computer-safe-mode=windows...
If that works then try the link below to deal with any potential software problems.
http://support.microsoft.com/kb/958233
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Blue screen of Death on Satellite M100

Hi
I have Satellite M100, we were having problems with the Blue screen of death occasionally, and then it seemed to get fairly consistent and the only way to ensure that the system didn't crash was to boot it in safe mode.
The sound had also stopped working. Decided to restore the system to factory settings so used the disc supplied and all went well till the system booted into windows allows you to go through the setup then blue screen again. The sound seems to have returned although it is a bit crackly.
So not sure whether this is the problem or not. Crashes Fatal system error and also driver_irql_not_less_or_equal.
Now can't boot into safe mode as windows setup hasn't finished....
Any ideas anyone?
Cheers
Simon

Hi
Yeah that;s what I am frightened of, tried several times no joy tried a normal xp pro disk as well as thought that might not have the right drivers and it might work but same there so guess it's a trip to the Toshiba hospital..... problem is guess everything is on the motherboard so by the time you have paid for a service call and motherboard you still have a 3 year old computer the figures don't add up and a new one would be the better option.....
Cheers
Simon

IQ770 blue screen of death safe mode limited won't run

Similar Messages

Maybe you are looking for