Iq772 no display from monitor

Hi have a iq772 pc and there is no display from the monitor, dvd, power buttons seem to work ok, think this may be an inverter problem, however can't seem to work out how to dismantle the casing from the screen. Any ideas, many thanks.

How have you guys got on with your screen issues. I find it crazy that HP havent not take responsibility for this issue. There seems to be lots of people out there with the same issue. My unit is about 2 years old and is now completely useless. A.) I cant afford to spend £398 on a new motherboard and B.) If I could afford to, I would probably put it towards a new PC.
Any help what so ever would really be appreicated

Similar Messages

HT3382 Connect from a MacBook Pro's mini display port to a Display Port monitor?

Hello everyone,
Is it possible to connect from a MacBook Pro's mini display port to a Display Port monitor with resolutions higher than 1920 x 1200? It seems Apple does not supply a mini-DP to DP adapter.
However, just as they do not make a mini-DP to HDMI adapter, but they do recommend a Belkin product for this purpose.
Is there any reason that a mini-DP to DP adapter or cable wouldn't work and support high resolutions?
Thanks for your feedback!

danz0r wrote:
Hey tjk,
Thanks for the response.
Do you have any recommendations for a potential set up? The audio output and Apple DVI are on different sides of my MBP, which is alright, I guess I can get two long cables to handle each. I was hoping to just have my MBP closer to where I use it, with a cord nearby plugged in on one side to the HDTV and resting near where I keep my MBP for when I want to use the HDTV as an external monitor.
With a converter like this, you can run video out of the MBP's DVI port, and miniToslink (optical) audio out of the 3.5mm stereo mini jack to the converter, then it will combine the two and output audio and video through HDMI to the monitor.
http://www.supermediastore.com/product/u/apogee-dvi-to-hdmi-converter-spdif-opti cal-toslink-coaxial-input-output?utm_source=cj&utm_medium=aff&utm_content=HDMI+A ccessories
Otherwise, depending on the TV's inputs, for video you could run DVI to DVI on the TV, or DVI to HDMI to the TV. For audio you could run 3.5mm stereo mini plug from the MBP to RCA adapter on the TV. Toslink/optical is also an option.

3 displays from a G5 (is installing 2 graphics cards an option?)

Hi there,
I'm trying to set up 3 displays from my G5 with an ATI Radeon 9600 XT. Ideally two are to be mirrored and one independant. I have two 23" Cinema Displays and a cheap Philips 190CW on which I'm trying to mirror one of the Apples. I bought a 1 x 4 DVI splitter (on ebay from Taiwan) which doesn't seem to work.
My regular 2 monitor set-up which has worked perfectly is to run one Cinema Display from the ADC output on the graphics card via an ADC to DVI converter and the other from the DVI on the card. So I thought I could simply run the DVI output into this splitter and run the extra monitor from one of the outs as well as the second Cinema Display giving me the mirroring on two. But all I get is the ADC connected Cinema Display and one or the other of the DVI connected monitors - not a split.
The splitter is supposed to support 4 monitors at 1920 x 1200 but when I connect all three to the splitter it only gives me one!
I have three questions:
1) Is it just a a dodgy Splitter?
2) If so can anyone recomend one that will work or a way to do what I want?
3) Is it possible to install a second graphics card such as another ATI Radeon 9600 XT and run 3 displays from them?
I'd very much appreciate any suggestions.
Cheers GR
G5 2.5 Duel Mac OS X (10.4.8) G4 17" Powerbook 167

Thanks very much.
That does answer my question but doesn't solve my problem...
It seems to be working on all three monitors in that configuration but it doesn't really do what I need in terms of the physical placement of the Apple Displays - I need them to stay together unmirrored and the Philips monitor a few metres away mirroring one of the Apples. (I'd love to get another 23" Apple but it's 5 x the $$$). How slow in everyday terms would it be with an extra graphics card? I'm doing this for a music recording set-up.
Thanks again for your help.
Cheers GR

Help! R5770 Hawk - No display from wake-up

No display from wake-up (Fans, lights are on, HDD spinning...). Latest ATI CCC 11.3 installed. To get displaying on monitor, I have to long press power button to shutdown (?), then press power button to restart (?). However, Win 7 stated "Resuming windows" ...
Any idea? Thanks for your helps.
My system:
MB: ASUS P8P67 PRO (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
CPU: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor
RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
GPU: MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
PSU: CORSAIR Enthusiast Series CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
Display: HP 2511x using HP supplied DVI cable.
OS: Win 7 Pro 64

Ask Asus support, this is mainboard related

Cons Group & Unit Display in Monitor

With the upgrade to EP3 the cons groups and units name displayed in the monitor are the short description instead of the long description as was previously the case.
It would be most appreciated if you would please suggest ways to change the names display from the short description to the long description.

HI Dan,
The display in Monitor works on standard future, and there is no customization involed in that as of now to display wither Short or Long description.
Else, you can keep the short description as same as Long description, I know this may not solve your problem if the length of Long Description is grater than short.
Also try contacting OSS help...
or in R/3 normally if we want any changes in the standard display, we will do the by copying the standard and make changes. So try using ABAP help, creating Own transaction code by copying the standard "UCMON" and apply necessary changes.
Give this as last preference, as this includes only technical work.

I Changed the Display from 60hz to 24 now no display Help, I Changed the Display from 60hz to 24 now no display Help

I am on a Mac G4 and just installed 10.5.8. I the System Preferences I selected Display and changed the display from 60 hz to 24. Now I get no display. Is there a way to revert back, or access the terminal to change the monitor back so it displays? I know I could reload but that takes a couple of hours.
Any Ideas?

Satrt in Safe Mode (Hold Shift while starting). That should allow you to restate the proper preferences in the Display preferences.
Be patient. Safe mode boots take longer.
If not, reset the PRAM:
Hold Cmd+Opt+P+R and start the computer. Hold the keys through two startup chimes and release. The machine should boot normally; settings will now be at default.
http://support.apple.com/kb/ht1379?viewlocale=it_it

G555 help: enable external display from BIOS?

Fellow G555ians, HELP!
My G555 (model 0873) does not have a backlight problem, but an entire LCD problem. i.e. the LCD does not turn on at all! My laptop is fine. Once every blue moon, when I turn it on the screen works.
I was wondering if someone could tell me the keystrokes needed to enabe EXTERNAL DISPLAY from the BIOS!
Since I can't see when I turn on the comp, I can't get into Windows, and therefore can't use the unction keys. However, I know there is a BIOS option to enable output to an external monitor hooked to the VGA port.
Can you please turn on your G555 and tell me exactly what keys you hit and when to get into the configuration part of the bios, change the display option to something other than LCD ONLY or whatever the default is, save and exit?
This would mean the world to me!
Moderator note: moved post to its own thread. Edited subject to reflect content. Veiled profanity removed.

hi KazeShin,
Welcome to the Lenovo Forums.
Here's a screenshot of the Lenovo G555 BIOS.
Spoiler (Highlight to read)
What you can try is to:
1. Press the power button and repeatedly tap F2 to get inside the BIOS.
2. From there, press the right arrow key once and press the down arrow key 9 times.
3. Power ON Display should now be highlighted. Press Enter key once and press the down arrow key once to select Auto-Selected display then press Enter.
4. Connect an external monitor via the VGA cable Press F10 to save and exit BIOS. Upon reboot, the display should automatically transfer to an external monitor.
5. If that doesn't work, press Fn+F3 to shift to an external display.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Display from MacBook Pro

I want macbook pro sleep and close whole i use iMac display from macbook pro but cannont, I use thunderbolt core plugin of both. any one know ? how to solve it.
Thank you for you time

You have to have a Keyboard, Mouse and the AC adapter connected to the Macbook Pro to be able to use what Apple calls Clamshell mode. That is where you have an external monitor connected to the MBP and close the lid so the notebook screen turns off but yet the system does not sleep so you can still use it with the external monitor.
No there is no way to put the MBP to sleep and still use it. That would be like you going to work, Taking a Nap and still doing your job. Can't be done as far as I know.

REMOVING THE DISPLAY FROM A TITANIUM POWERBOOK

The display on my 15" Titanium Powerbook no longer works. The laptop works fine if I connect it to an external monitor. Does anyone if you can remove the display from the unit totally and still use the powerbook like a desktop computer connected to a monitor?

Welcome to Apple Discussions!
I have a friend who did the same with an iBook, and managed to get it to work. Given the trickery of how the cables are hooked up, if you are at all queezy, have an authorized service technician help you out. You wouldn't want to expose the wires to moisture and dust that normally don't get exposed.

Processor fan was producing lot of noise and nothing was displaying in monitor

hi
recently my call manager was not working.
while it was switching on the processor was continiously producing lot of noise
and t was not displaying nothing on monitor.
no changes was made after sucessfull running from last 5 mnths.
can any one clarify what is the problem.
thanks
regards
praveen kumar gvk

hi
thanks for rply
i am having ibm server, model is 7825, the server was noot booting, nothing was displaying in monitor.
1. serever power on but it was not load into the os.
2. pci riser was installed. there is no saparate video slot.
3. monitor was connected to standard vga.
4. in the server bmc heart beat led blinking, standby power led, sas/sata controller power led is glowing.
5. hard disk drive activity led is glowing continuously.
the problem is server is not booting. nothing was displaying in monotor. all the fans are working fine. i had tried each fan they are all working. i also try to boot with single ram. but the server was not booting.

Mirror 3x 30" displays from MacPro ???

I want to mirror three 30" displays from a MacPro.
MP has stock MVIDIA GeForce 7300 GT installed in Slot 1.
Have a eSATA card installed in Slot 4.
Can I install additional card that will run two additional 30s?
And then mirror all three of them?
Does it need to be in a particular slot?

I am having similar issue with 23" CD. After computer (MBP using 23" as primary display) goes to sleep overnight, the monitor does not react when attempting to wake the computer in the morning. It was reacting when rebooting the computer, however this morning the screen did not react to a computer reboot either!
Is my screen failing, or could it be the video card in the laptop?
Any apple support people listening?

New iMac not displaying Second monitor correctly... ATI graphic to blame?

I bought a new iMac a week ago, only to find out yesterday that new ones were released. My local Apple Store had no problems allowing me to swap my now outdated iMac for the new one that came out yesterday, and I am very grateful for that.
However, ATI's graphics are not getting along with my dual monitor setup. My display looks excellent on the iMac itself, but on the external 23" HD display from HP, it is all distorted and only shows 3/4 of the screen.
HP does not make drivers for OS X on their displays, since they are plug and play. Therefore, the issue is in ATI.
Anyone else having trouble with this?

Danny,
It's probably just the monitor preferences aren't set up correctly. Please follow these instructions:
1. System Preferences - Displays
2. Using the iMac's display preference click the Arrangement tab and you will see the orientation of the monitors. You will need to choose the left pane and move it around to get the orientation you want. When you choose it both box in the preference and the window on the monitor will get a red band around the outside to help you orient where you are. It takes a little trying but I'm sure you'll figure it out.
You didn't say what you have done to troubleshoot the issue so I'm assuming you haven't looked at the monitor preferences yet.
Regards,
Roger

Characterestics is not getting displayed from ODS in Multiprovider

I have Join ODS and remote cube in Multiprovider.And data is not getting displayed from ODS fields neither char not KF getting displyed in Multiprovider.I have checked the identification in Char that Char is presend in both the Cube and ODS,But that Char has data in ODS and not in Cube so I checked Char from ODS in Identification.I am still not getting data from ODS.
Can anyone help me in it?

How many requests do u have in the ODS?
If u have only 1 then just right click on DSO and say delete data it will be faster than deleting by request wise....
What is the message u r getting when u r trying to delete the request?
Khaja

Values not getting displayed from first page of the report.

Values in the report is getting displayed from second page.
First page in the report only displaying the report title and column names.
Secone page onwards, data and column names are generated.
Can any one please help me, with the cause of the problem.

what reporting tool?
Interactive Reporting
Financial Reporting

How to drive a 30" Cinema Display from a new 27" iMac?

How do I drive a 30" Cinema Display from a new 27" iMac that has no obvious video out port? There are lots of ports, but nothing resembling or identified as a video out port. Is the very small hole in the cabinet by the power in port the thing I'm looking for? If so, the power/video adapter for the Cinema will not work as is. Do I need a Mini DisplayPort to VGA Adapter? I am completely uncertain about this, and could use solid advice. The AppleCare tech I spoke with today seemed not to have a clue. He said he would get back with me on this. He didn't.

Overview
Every Mac with a Mini DisplayPort allows you to connect an external display or projector using an adapter. You can use an external display as your main workspace or to extend your desktop, or you can work in mirrored mode with a projector so you can view what your audience sees.
Use the Mini DisplayPort to Dual-Link DVI Adapter to connect your Mac to a 30-inch display that includes a DVI connector, such as the 30-inch Apple Cinema Display HD, and enjoy the ultimate widescreen canvas with a resolution of 2560 by 1600 pixels.
Compatible only with Mac computers with Mini DisplayPort and Mac OS X v10.5.6 or later.

Iq772 no display from monitor

Similar Messages

Maybe you are looking for