IR and ID copmonents definitions
Hi All,
Canu u plz send me all definitions for both IR and ID copmone
Regards,
Prasad.
Canu u plz send me all definitions for both IR and ID copmone
Please make a search on SDN for basic queries; this avoids spamming of your thread and hence of SDN!
Regards,
Abhishek.
Similar Messages
-
I have edited photos in i-photo and would like to have them printed at any photo development lab. I am in India and this is definitely "microsoft" country !
Please advise me how to burn these edited photos to a disc to take to the nearest printing store in a format that "windows" system can understand.
Thanks in advance. I look forward to learning about this.Select the pics in the viPhoto Window and go File -> Export and export them to a folder on the desktop. Burn that to disk with the Finder's burn command. Result. A disk with a folder of images that any machine can understand.
Regards
TD -
XI Technical and Business System Definition For MDM 2.0
Hi,
We're trying to define the XI technical and business system definitions for our MDM 2.0 installation to work with SRM 5.0 and PI 7.0.
In the documentation we have we can't find reference to what type of a technical and business system to define. Should they be abap/java/standalone/3rd party?
Does anyone have any install scripts of what they did?
Regards,
Jerry MartinekYou can set it as third party and it will work fine. Because MDM isn't built on the wed application server like the majority of the netweaver apps, it's basically treated like a third party system as far as integration is concerned. Hence you send and receive XML documents to PI and convert them into IDocs to send to R/3
Check the beginning of this document on creating the business and technical systems for MDM
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario -
XI Technical and Business System Definitions For MDM 2.0
Hi,
We're trying to define the XI technical and business system definitions for our MDM 2.0 installation to work with SRM 5.0 and PI 7.0.
In the documentation we have we can't find reference to what type of a technical and business system to define. Should they be abap/java/standalone/3rd party?
Does anyone have any install scripts of what they did?
Regards,
Jerry MartinekThird party will work fine
-
I upgraded my 3gs to ios5 and the sound of the messages is not working well, it's slow and my bluetooth definitions are not stable how can i get back to the ios4
App Store->Purchased
iTunes->Purchased->Download All -
Prob creating ABAP Proxy-Interface use external and interna msg definition
Hi,
I've created a service interface using external definition (message type for request and response), imported via WSDL file. However, while creating ABAP proxy in SPROXY, it gave the error message "Interface uses external and internal message definition". I searched through the forum, the questions were raised but no definite answer was found. Is it not possible to generate a proxy if there is any external definition used?
Details of the error message:
Message no. SPRX122
Diagnosis
In a message interface you can use messages from different sources:
Message types and fault message types edited in the Enterprise Services Repository
Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Enterprise Services Repository.
p/s: My external definition is actually derived from a ABAP FM web service. The reason why i used external definition is that i try to avoid the tedious steps of hard-coding all the data types for the request and response message types.
Any help would be highly appreciated.
- juliusHi Arvind,
For technical reasons, proxy generation and the respective editors in the Integration Builder do not support the entire language range of XML schema and WSDL. For an overview of which language elements are supported, see the Excel spreadsheet in the SAP Service Marketplace at service.sap.com/xi ® Media Library ® Documentation: SAP XI 3.0 (SP11) u2013 Supported XML Schema and WSDL (EN).
I couldnt find the above document in the service market place. Any hint to find it?
Thanks.
- julius -
Programmatically create and deploy process definition
1. It seems that PAPI does not support process definition creation and deployment. We need to programmatically create and deploy process definitions, what should we use?
2. Is it possible to programmatically add variable definitions to a process instance? We have an external program that creates the process instance but sometimes the process instance may need to add some additional variables.
Thank you for your help,
shirleyHi Shirley,
You're right PAPI wasn't intended to deploy processes, however, you can deploy processes automatically using ANT.
You'd need to republish and redeploy (again using ANT) to add additional variables to a deployed process. Simplest thing to do would be to add attributes to an existing BPM Object. If you just added a new variable, you'd need to change argument mapping troughout the project.
hth,
Dan -
Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?
Try this:
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute). -
Revision: 4836
Author: [email protected]
Date: 2009-02-04 11:07:52 -0800 (Wed, 04 Feb 2009)
Log Message:
Fix problems with asdoc comments and conditionally compiled definitions. Fixes bug http://bugs.adobe.com/jira/browse/ASC-3649
Ticket Links:
http://bugs.adobe.com/jira/browse/ASC-3649
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/Compiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/ConfigurationEvaluator.javaIn the default php.ini is set open_basedir which limits work with php only to few directories (and directories bellow them). There is set /srv/http, /home,/tmp and /usr/share/pear by default.
To allow your vhost you should add /data/www or set empty value. -
Backing up and restoring site definitions
Losing your site definitions in Dreamweaver can be a disaster, but it does happen sometimes. The best way to prepare for such an eventuality is to back up your site definitions on a regular basis.
Creating a backup
You can back up all your site definitions in a single operation by selecting Site > Manage Sites. In the dialog box that opens, Shift-click to select all site names, and then click Export.
In Dreamweaver CS6, the Manage Sites dialog box looks like this:
In earlier versions of Dreamweaver, it looks like this:
Dreamweaver asks if you want to include passwords and login details (this is the default option). Whichever option you choose will be applied to all sites, so click Cancel if you want to treat some sites separately, and export your sites in two sets by using Ctrl/Cmd-click to select them.
When you click OK, Dreamweaver asks where you want to export the definitions. Navigate to a suitable location, leave the File name field unchanged, and click Save. Although only one site name is listed in the File name field, Dreamweaver exports all the site definitions as .ste files in a single operation.
NOTE: This process backs up only the details of your sites, such as the location of the root folder, FTP details, and so on. It does not back up the actual files in your site, such as .html (or .php, .asp, .cfm) files, images, and style sheets. It's a good idea to use your normal file backup routine on your actual files from time to time, as well as exporting the site definitions.
Restoring site definitions
In the event of losing your site definitions in Dreamweaver or moving to a new computer, open the Manage Sites dialog box, and use the Import button to navigate to your backup .ste files.
What if I don't have a backup?
Often, if you don't have a backup of .ste files, you need to go through the whole process of re-entering the details for each site manually.
However, you might be able to restore them by using a restore point on Windows or Time Machine in Mac OS X.
On Windows, the site definitions for Dreamweaver CS6 are stored in the Windows Registry at HKEY_CURRENT_USER\Software\Adobe\Common\12.0\Sites.
In Mac OS X, they are at Macintosh HD:<username>:Library:Application Support:Adobe:Common:12.0:Sites:Site Prefs.
In recent versions of Mac OS X, the Library folder is hidden. In the Mac Finder, select Go > Go to Folder, type ~/Library in the search field, and click Go.
Dreamweaver CS5.5 site definitions are in the same location, except use 11.5 instead of 12.0. The numbers for CS4 and CS3 are 10 and 9 (without a decimal fraction) respectively. For earlier versions of Dreamweaver, substitute Macromedia for Adobe, and adjust the number accordingly.
If you don't have a backup of the actual files on your site, download the files from your remote server.Hello,
We are running iPlanet 5.2 Messaging Server and need
to migrate to another (duplicate) 5.2 Messaging
Server. We have all the software installed and the
LDAP user accounts created. Now we just need to move
the existing mail from one server to the other.
I found the Backing Up and Restoring the Message
Store section in the Admin Guide says to back up and
restore your data, Messaging Server provides the
imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? The Message Store is where messages get delivered to, so you can read them.'
The queue is where messages are temporarily stored, pending delivery to wherever they go.
You can use tar, cpio, or what have you for the queue. Stop the server first. . .
You then just restore the files to the new server. No need to restart or anything like that. Just dump the files in, and run
imsimta cache -sync
to tell the MTA to re-read the queue.
Can I just backup and restore the
Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim -
How to use Custom Tags for Theme and Base Map Definitions
In Mapviewer documentation I've found the following new feature:
The XML definition of a theme or base map now supports application-specific
attribute tags. You can use the Custom Tags option in the theme definition in Map
Builder to specify tags and their values, which can be interpreted by your application
but are ignored by MapViewer itself.
I'm able to define a custom tag in Mapbuilder, but how can I use it in my Application?
Thanks.As he said, you have to use as Platform service to create adapter in OIM.
tcUserOperationsIntf service = Platform.getService(Thor.API.Operations.tcUserOperationsIntf.class);
HashMap<String,String> searchmap=new HashMap<String,String>();
searchmap.put("Users.User ID", userID);
tcResultSet searchset=service.findAllUsers(searchmap); -
Compressor and dissolves -- a definitive answer?
I’ve been reading through many online forums, and although I see this problem posted often, I have yet to read a well-informed answer. Most of the solutions are based on guesswork or contradictory answers. To begin with, I am using FCP 4.5, OS X 3.9, Compressor 2, and DVDSP 3.0.2, and like many people I’m surprised by how poorly mpeg-2 encoding from Compressor renders fades to black and dissolves. I’m basically going from an edit in FCP to compressor and then to DVDSP.
I could be more specific in how I am editing my project, but I’ve seen this problem apply to progressive, interlaced, NTSC, and PAL projects. It also seems to apply to projects that are exported directly from the timeline, and to those that go through an extra quicktime step. Also, this problem has nothing to do with upgrades (I have a clean install, and keep my updates, well, updated).
Some folks blame compressor, while others blame mpeg-2 in general. It seems to me that it cannot be mpeg-2, because thousands of DVDs are produced every year with near-perfect fades, so the problem must lie somewhere in the software.
Is there any definitive source as to how to produce reasonable fade in mpeg-2 (book, forum, online tutorial)? It seems strange no one has nailed this down in any forum.
Much thanks.
Dual 2 Ghz Power Mac G5 Mac OS X (10.3.9)On 1 - 1.5s duration dip to color (black) transitions
in FCP I find the results with Compressor v1.2.1 to
be v. good - that is to say no blockiness and a
professional result to the level of supplying DVD to
clients who express satisfaction.
Apart from C v.2 and OSX I use the same ver. of Apps
as you - I suspect the C v2 is the culprit. Have you
tried going back to 1.2.1 to see if the problem
persists?
I'd like to go back to Compressor 1.2.1 because that worked fine. But I'm having difficulty installing it. When I used the DVD Studio 3 install DVD, and try to install just Compressor (DVD Studio 3 is still on the hard drive in a "Previous Version" folder), it seems to install but never shows up. And when I try to install both Compressor AND DVD Studio Pro 3, it says the installation was successful, but NO Compressor appears in the Applications folder.
Any suggestions?
Thanks,
Brad -
We have had several (7-10 recently) macbook Pros start this issue. The screen will jump from regular to blue, the background image will go away and it will be replaced with a blue screen, the icons change size and the screen resolution changes. Someimtes the users name field on the login screen will fly in from off screen... run diagnostics (AppleJack, Disk Util) and reset PRAM and SMC and sometimes this helps but wanted to know if there was a definite reason for this or a better resolution to the problem?
Thanks all
Macbook Pros are all newer (some only a month old) Unibody models running Snow Leopard and LionAppleJack has been discontinued, so you should uninstall that.
I'm suspecting something in software across all machine or a security breach as the primary cause of your problems.
Wipe and install everything fresh, firmware update the router, change passwords, new software form original sources, etc.
This might assist.
Step by Step to fix your Mac
WiFi security issues, at home and WiFi hotspots
Harden your Mac against malware attacks
How do I securely delete data from the machine? -
Rescue & Recovery 4 and Updated Virus Definitions
Hello:
I have a T61 with Rescue and Recovery 4 on it. It does not have Symantec Antivirus installed on the system drive. We use a different AV.
I press the Blue button on start up and it takes me to Rescue and Recover 4 and there is a button that reads "Virus Scanner" and I click it and get a window titled "Symantec Virus Scanner" and it provides two options. 1 - Use virus definitions from this CD or 2 - Use updated definitions from the update folder. Option 2 lets me enter a path to an update folder or browse to it. In the narrative it says I can burn the updated definitions to a CD and use that as the source. It says to get the updated definitions from another PC.
My question is where can I get the definitions if I do not have another PC with Symantec on it. It does not give an option to download them and I can not find a link on Lenovo's site and tech support was not even aware that this was an option in Rescue and Recovery and gave me no help. (2 different calls and 2 different reps.)
Thanks.Can anyone (please) tell me which version of the signature files the Rescue & Recover partition needs?
It looks like there are three posibilities:
1) v5i32
2) i32
3) x86
Update: Well I figured it was either the v5 or the i32, and downloaded both, but can't get the embedded ZIP files to extract. The syntax is supposed to be update_name.exe /extract <filename> <target path>
From what I can tell the file to extract is VIRSCAN.zip but the extract fails................
Thanks!
Jim -
Time infotype macrocs and time infotype definition.
Hi All,
Please provide me the following information
1. what are the MACRO related to time infotypes ?
2. how to define infotypes for Time data ?
3. what is thedifference between PNPCE and PNP logical database ?
Please provide me some documents and smaal code snippets or program.. to get tghe clear idea afor the same..
Please reply asap..its urgent..
Thanx in advance.
Amruta Sawant.Hi Jothi,
use this macro for all time infotypes
<b>rp_read_all_time_ity pn-begda pn-endda</b>.
Bhawanidutt
Maybe you are looking for
-
CS3 'freezed' installation problem on Windows Vista Home Premium.
Hi! I searched everywhere for answer that installation of my PS CS3 is freezed in moment on the screen. I installed Acrobat Reader, Dreamweaver cs3 only. Both in English language. I tried to uninstall, then install, using cs3clean, but it`s nothing c
-
My Itunes wont play my songs,
My itunes will delete my music from my phone and put an exclamation mark next to the song, and it won't load new ones on. This is the second time it whad done this, I have tried turning my computer off, turning my phone off, closing Itunes and syncin
-
Error on launching Applescript app
Hey, i created some Applescript app which i scheduled using Schedule manager or Task Till Down and everything was ok. Since 1 month, after a while i turn on the laptop and that everything is running, i receive the alert message (in attachment). If i
-
Hi I have created a freight order for which the Rail is the mode of transport. I have created a schedule for the Rail.I cannot able to assign the Schedule to the created Freight order. Through transportation cockpit,i can able to create the freight
-
Database is corrupt when trying to open Creative Suite 3 in Mavericks
I backuped up my hardrive on my iMac i7 then erased the hard drive and repartitioned it so I could run 2 different operating systems. I renstalled all my backup info on one of the partitions and then upgradded ito OS X Mavericks. When I went to o