IR export options and embedded HTML

Good day,
Apex 3.2.1.00.12, 9.2.0.8 DB, on AIX 5.3.
I have an IR where in I use html in the SQL that defines it to format certain columns such as the below
"<div style=""overflow:auto;height:50px;"">column value here</div>"I then define the display type as ' Standard Report Column '.
That obviously allows me to have some "formatting" power that the IR does not give by default.
Problem is when I do the export to a CSV I get the html markup included as the value of the column.
Is there a way I can keep my formatting desires and export without the html included in the value ?
Also, can I export the whole result set to CSV, not just whatever I have pagination set to ?
I do NOT have a print server.
Thanks for your time,
CLG

What export option you used.
I am using default export option and it exports all the records on report. Not current page.
Furthermore for your requirment I ahve done lot of test regaring same thing. But I didnt find any solution. So what I did was create my own export function for those reports and then use that.
Thanks
* If this answer is helpfull or correct then please mark it and grant the points.

Similar Messages

Slideshow Export options and AppleTV

Slideshow options seem a nice way to create a quick video of still/video clips (eg for an AppleTV), but unless I'm missing something Export options seem rather limited.
There isn't enough control over encoding parameters.
My first attempt exporting a mix of photos and video clips (30fps source) using the AppleTV setting failed to sync to AppleTV.
Inspecting the file, resolution was 720p but the reported fps was 28fps. That is too high for AppleTV which officially only handles 24fps at 720p but will usually cope with 25fps. Bitrate was also fairly high, nearly 5Mbps the quoted AppleTV limit for h264.
Now I'm not wild about changing fps for video conversion anyway, but I would like to compare the 720p output vs the '540p' option we often opt for to maintain fps with 30fps source material.
Custom dropdown gives very little in the way of options I can see, and codecs are limited to h264/MPEG4 - people might in some circumstances want to export at full quality to add to projects in other apps with greater editing control.
Any idea if you can export with more customisation of parameters?

Aperture 3.0.3 has an option for iPod size through HD 1080p
As has iPhoto 09
as well as a Custom Export feature, which allows you to choose the Codec
It allows you to choose between 2: Mpeg 4 and h.264. iPhoto can export to anything that QuickTime will support: including - and by no means limited it to - Apple Intermediate, HDV, DV, uncompressed and so on. There are 50 or so codecs I can choose from with iPhoto.
Uploaded with Skitch!
/Frame Rate/Width/Height
As can iPhoto.
As I said, this is odd. You would expect Aperture to have the more options.
Regards
TD

Composition widget and embedded html

Hi, I'm trying to embed html from a wazala store, within a compostion widgit.
It works very well the first time using the desired rollover effect but when the target is hidden after rollout (as expected) and one rolls back over the trigger the embeded html in the target doesn't reapear except if the browser window is refresehed.
I've uploaded the example, the grey box in the top left corner is the trigger.
http://imberg.at/beerbottle/
Thanks in advance for any help
Andy

Put the text into a CDATA section. Like this:
<![CDATA[<html><body>This is HTML</body></html>]]>
Or escape the characters (< and & at least) that need to be escaped in text nodes:
<html><body>This is HTML</body></html>
Or even better, just use standard XML software and ask it to output your data to an XML document instead of writing your own code to output XML to a file. It takes care of this problem and many others.

No Export options and Place not working correctly. InDesign CC 2014.

I cannot place a file into a frame with cmd+d or File > Place.
I get the preview on the cursor but won't place into a frame which I need to keep the frame effects and size options.
- Also -
I am not getting any options on Export - to change the output file type. Seems to be defaulting to PDF (print) in the dialogue box there is no dropdown.
How do I fix this?
I don't know how long this has been going on for as I don't use InDesign as much as other programmes but I am guessing since last update. I hate I am paying for this per month and have been sat on the phone and chat for over an hour waiting on a response. It is slowing my workflow down.
I am fully updated.
Creative Cloud Suite
iMac Mid, 2011
OS X Yosemite
Version 10.10.2
Processor: 3.1 GHz Intel Core i5
Memory: 16GB 1333 MHz DDR3

Try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences
Note: If you're searching for the file as described in this article, you MUST MAKE YOUR HOME LIBRARY VISIBLE. It's hidden by default. In Yosemite or Mavericks, in the Finder, hold down the Option key to select Go > Library.

I need help understanding export options and optimizing for web

I have been using FCP X for a short while now and have a pretty good grasp on the editing capabilities. What I'm having a horrible time figuring out is the export/share options. The videos I create are typically approximately 1 minute in length and get posted to a web site (we have our own CMS and video player so I'm not using YouTube or Vimeo or anything like that). In order to post them I need them to be MP4s and then I have to create .webm and .ogv files. The source material I work with is generally great, high quality stuff, so I end up with very large output files from the initial FCP share master file options.
When I use MPEG Streamclip to make my MP4s I end up with files that are still quite large and I can't seem to ever get the file size manageable without losing tons of quality. I do not have Compressor, though if that will solve my problem I will put in for the expense of it. What I'm trying to understand is what sorts of settings I should be trying out to get my file sizes to be manageable without completely compromising my quality. And I know this can be done, because the company I work for pays for a great quantity of video work each year (from an outside production firm) and the clips provided are beautiful in quality and small in file size -- for example, I recently worked on a video and got it into the 40MB range before quality went to crap, working off the same material the production company we do work with had theirs down into the teens and looking beautiful!
To throw an even greater wrench in the works, I am working off a mac. But when my boss, on a pc, saves the mp4s I create (raw files -- not what is posted to the web) locally on his machine and views them from there the sound is always off a tad and the people in the videos look like they're lip synching.
Any advice on either of these is MUCH appreciated. I've been trying to figure this out properly for months, and only today decided to stop seeing if someone else had the same question and just post my own.
Bronwyn

Thank you Karsten, this was helpful I have utilized the Quality slider and the frame size options before though with limited results. I've never messed with the Limit Date Rate option as I don't know what I'm doing with it, I see you put 5Mbps. Is that a typical setting that I could use?
Using stream info, here's info on my original source file:
Stream: Charles_0023_2.mov
Duration: 0:00:51
Data Size: 96.51 MB
Bit Rate: 15.77 Mbps
Video Tracks:
H.264, 1920 × 1080, 29.97 fps, 15.64 Mbps
Audio Tracks:
MPEG-4 Audio stereo, 48 kHz, 127 kbps
Stream Files:
Charles_0023_2.mov (96.51 MB)
As a comparison, here's the info on a similar clip that the company we sometimes use created:
Stream: Charles_0019_4.mp4
Duration: 0:00:49
Data Size: 4.66 MB
Bit Rate: 0.80 Mbps
Video Tracks:
JVT/AVC Coding, 710 × 400, 29.97 fps, 635 kbps
Audio Tracks:
MPEG-4 Audio stereo, 48 kHz, 162 kbps
Stream Files:
Charles_0019_4.mp4 (4.66 MB)
I'm fine with bringing the frame size down some and modifying the limit data rate, but sometimes I feel like I'm forcing my video into something it's not and the quality suffers -- this is where my understanding of video work breaks down LOL. Any suggestions of how I can get my .mov into something like the the .mp4 above?
Also have you had any experience with mp4s not playing back properly on pcs?
Again, thank you!
Bronwyn

I have made a 3:40 video in imovie and am trying to export it to youtube. I have tried every export option and I always get the same message: We are unable to export your video error code (-50). I have 50g of space left on my hard drive.

I have Imovie 09 and am using Snow Leopard 10.6.8

I've tried everything, including exporting to Quicktime with the settings suggested by youtube...nothing seems to work and I keep getting the same message: Unable to Prepare Project for Publishing. The project could not be prepared for publishing because an error occurred. (-50)
The original name of the project had parenthesis and I even renamed it so now its just simply "Going Nowhere"

YouTube and embedding html

OK..very new to Dreamweaver, but ok with the old go live..
here's my question...I need to embed a youtube movie. easy
enough, just place the code in the code area. However, I need it to
be in a specific place and it needs to go partially over a portion
of a graphic. I tried to take a flexible div and put it in the
design mode then add the html in the code mode. All I got was the
code words on the page. Then I just tried putting the code in as
close to where I thought it should be and I got a install missing
plug-in..well that never happens when i watch other youtube on
other sites..I am just lost and a little frustrated. Please help if
you can.
Thanks
Rob
www.sitandslide.com

You cannot paste code in Design View.
You must find the big open space on your page. In Design
View, try typing
"Paste Code Here" to give you some idea where the code
insertion point needs
to be. Then switch to Code View, Ctrl+F to find the words
Paste Code Here,
and paste your YouTube player code in that division or table
cell. You
can't paste player on top of an image unless the image is a
background
image.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"The Principal" <[email protected]> wrote in
message
news:ftoccj$jtf$[email protected]..
> i am not familiar with code so i use the design view. I
tried to put my
cursor
> where i want it but all it does is take me to the code
for the graphic
that is
> on the page. What type of insert should I use to put the
code in..I hope
that
> makes sense because afrter I just read it i am even
confused..
> If you go to the other post i have added the code for
the page. I just
want to
> put a youtube movie in the blank space on the big
graphic...I am too old
to be
> trying this..haha....but i love it when it works..
> Thanks guys...
> Rob
>

HTMLdb upgrade to 2.0 and embedded html

I have upgraded to version 2.0 from 1.5. There are locations within the site that place html tags within the variables (like <a href=...). These tags are no longer parsed as html, they are displayed as text now. I found that if I make sure the variable does not save state the html is then parsed. I think this is probably an issue.
Any ideas how I can get the html to work by convincing 2.0 to act like 1.5 ?
null

Hello James,
Did you apply the PL/SQL Web Toolkit patch to your database? You can find it with the HTML DB v2.0 installation files under the patch directory.
You can read some more on the following thread: NLS support problems when using AL32UTF8 in dads.conf
Hope this helps,
Arie.

Quicktime Pro closes out when i click on Export:Options:Settings

Hi I have a Latitued D630 Laptop running Windows XP pro with a Nvidia Quadro NVS 135m graphics card. When I go to File, export, options, and click on any of the options under video quicktime will close completly out. I remember when i first installed quicktime and opened it up it gave me an error that talking about the buffer. I am no longer to get the error message to research it online.
I narrowed it down to my graphics card because if i uninstall my graphics card and try the same steps it works just fine. I have tried to find older drivers for my graphics card and they all do the same thing. I called dell on the issue and they have no clue.

+I have a Latitued D630 Laptop running Windows XP pro with a Nvidia Quadro NVS 135m graphics card. When I go to File, export, options, and click on any of the options under video quicktime will close completly out.+
Some people with that issue have reported that they can get past that crash if they go into their QuickTime Control panel (Advanced tab), and select "Safe mode (GDI only)". (Click OK and restart QuickTime after making the settings change.
Does that bring any relief in your case?

Web Intelligence: Save Report as PDF and with embedded HTML code

Hi all.
Sorry but I'm not able to find any post about this matter, please feel free to provide links if you know existing topics about this problem.
We created a beautiful report with HTML5 code embedded into a blank cell and we are now trying to export it in a printable format (e.g.: PDF or HTML).
As you know (as per manual information) it is not possible to export a report with embedded HTML code and keeping it in the output (cell with embedded HTML code is rendered blank).
My question is: is there a known workaround or an alternative solution to export the report and keep its content?
Print screen is not a valid option :-P
Thanks for the support or any suggestions
Stecas

Product limitation; vote for change on ideaplace, etc. I don't believe there is an *easy* workaround, but see:
https://scn.sap.com/thread/3149287
HTH
NMG

How to restrict 'Broadcast and Export' option of BW report through web.

Helllo,
Please anyone let me know, how NOT to give/allow "Broadcast and Export' option in BW report, when accessed through Web.
Is there is any Auhtorization object which restrictes this option.

Hi,
Please check this, it may help you.
http://help.sap.com/saphelp_nw70/helpdata/en/80/1a68b4e07211d2acb80000e829fbfe/frameset.htm
Regards,
Madhu

How do I share a new project on imovie if the export option is greyed out and not an option?

how do I share a new project on imovie if the export option is greyed out and not an option?

nicoleking wrote:
... I heard that if you bring in your old iPhone, they will give you a new one with some kind of fee, but I don't know how that works.
https://discussions.apple.com/message/22920500

Embedding HTML in XML CDATA and encoding issues

Hi all,
I'm embedding HTML code in a CDATA section. My problem is that, depending on the document, the HTML can be encoded in many formats. I borrowed a piece of code that sniffs that format so i can create String in the "right" encoding (or at least the one that was guessed).
- If I directly injected those in the CDATA section, i guess they'd be encoded in UTF-8 and some character would be misinterpreted?
- What if i would transcode the HTML from the sniffed format to utf-8?
-Are there any issues woth doing this?
Sorry if this is a dumb question but I'm quite new to that kind of encoding issues.
BTW i'm using DOM.
Thanks
lexo

I don't know if it's a dumb question. I just don't understand it at all. Encoding issues only arise when you write data from a Java program to an external location, or when you read data from an external location into a Java program. And none of the activities you mentioned there have anything to do with that.
When you write your XML to an external file, or wherever you write it to, it gets encoded at that moment. The whole thing. Elements, attributes, CDATA sections, the whole thing. Doesn't matter what's in it, the whole thing gets encoded in whatever charset was chosen.
Does that help?

Messy format exporting to excel and text/html

Need help please....i'm in the middle of problems, i'm developing application that can exporting reports to some formats like pdf, excel, and text/html. it is become a problem when i exporting it to excel or text/html, the format are so messy... I'm using POI library 2.0 when exporting to excel. My codes are simply like this :
try {
response.setContentType(type);
if ("application/vnd.ms-excel".equals(type)) {
exporter = new JRXlsExporter();
exporter.setParameter(JRXlsExporterParameter.JASPER_PRINT,jasperPrint);
exporter.setParameter(JRXlsExporterParameter.OUTPUT_STREAM,response.getOutputStream());
else if ("text/html".equals(type)) {
exporter = new JRHtmlExporter();
exporter.setParameter(JRExporterParameter.JASPER_PRINT,
jasperPrint);
exporter.setParameter(JRExporterParameter.OUTPUT_WRITER,response.getWriter());
is it just because the library? or i have to add some additional code before jasper reports execute it? thanks a lot for the answers....
Message was edited by:
darma_sadha
Message was edited by:
darma_sadha
Message was edited by:
darma_sadha

First, you forgot to tell what the problem is. Second: this is not a Jakarta product support forum. POI has a mailing list of its own. Go ask them.

I get this message "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again. I have this file from when I had CS4. It worked then. I trying to make

I get this message when I am trying to save a file that was done in CS4, now using CS6 "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again." Even if I start a new file I unable to save it with this font. I need to use this font.

Then you need to outline all text before savng the PDF.
Make sure you do this on a copy of the file.

IR export options and embedded HTML

Similar Messages

Maybe you are looking for