IR Extender for QIP-7100 (-1 and -2)

Hey Everyone
I see posts about IR extenders across the boards, but no working links
Does anyone know where I can obtain these IR extenders? I have two boxes and I'm getting killed with IR Repeaters, they just aren't the same.
I bought an IR receiver from monoprXXX.com [advertizement removed ;-) ], someone had reviewed that it works with the 7100, but it doesn't. After contacting their support, they clearly said the review should have been dropped b/c its not true :/ ...they're great are RMAing the unit.
~Todd

I got one from Amazon that works with my 7232 and the reviews say it works with the 7100s.
http://www.amazon.com/Infrared-Receiver-Extender-Description-Compatibility/dp/B002JSDHCY/ref=sr_1_1?...
Dave

Similar Messages

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions

I've had a Samsung network extender for over a year and it's been great. About a week ago, my iPhone 5 stopped connecting to it. I've never had problems with this. All the lights on the extender are blue, so it seems it's working fine. Any suggestions?

Oh no! Lets ensure that you are connected. Have you tried to reset the Network Extender? Are other devices able to connect to the Extender? Is your Internet service up and running?
Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Strange Issue With QIP 7100 STB and Sony Bravia TV

I am having a strange issue with a 27" Sony Bravia Television connected to a Motorola QIP 7100 HD STB.When viewing a non HD channel the television input number display, resolution display, picture mode display and clock come on and off every few seconds. The issue stops when I tune in to an HD channel. If I return to a non HD channel the issue reappears. I am new to FIOS from Directv where I did not experience this. The television is connected to the STB via HDMI. Everything else seems fine except for picture stuttering that I am getting on all of televisions but I'll save that issue for a separate thread. I tried removing the TV remote to no avail and changing the batteries in both the FIOS and TV remote with no success either. This is a very annoying issue and I feel that it must be caused by the STB. I was wondering if anyone experienced anything similar to this and if they were able to correct the issue. I would greatly appreciate any assistance. Thank you and Happy New Year.

It is possible that your Sony doesn't support the mode the STB is set to for SD (some HDMI TV inputs don't support all formats that the STB can output).
Have you tried going to the STB settings menu and under Video Settings played with the various options for 4:3 override? This setting controls the STB output for SD and lets you set 480i, 480p, and OFF (also STRETCH at least on some firmware version). In the OFF setting the STB upconverts your SD to whatever the HD resolution is set for - 1080i or 720p.
Hope that solves your issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back and it will also send my music to the airport express?

I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back yard and it will boost our wo
Ireless signal and also send my music to the airport express? Or does the airport express work as a stand alone hub?

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

I've had a network extender for 2 years and since August I can't get a GPS signal

I have had a network extender for over 2 years and have had no problems with it. Since August, I have had nothing but trouble. The GPS signal went out and I went through all of the Verizon troubleshooting tips and nothing worked. They sent me a new one and it has worked for about 2 weeks however now I have the same exact problem, the GPS is red and I haven't had a GPS signal for 2 weeks now. What is going on? How is it possible that after over 2 years of having no issues, we can't get a GPS signal?

I spoke with another Verizon tech rep and he was going to open a network trouble ticket however first he needed to gather some information. He directed me to this site http://8x8.com/Resources/Tools/VoIPTest.aspx
to get info on the speak of my computer and IP connection however when I began the test, there was an error and it couldn't measure my VOIP connection. The Verizon rep said that there isn't software in the network extender and that it's based off the VOIP. So he suggested I call my internet provider and tell them that I'm trying to use a VOIP and for some reason it's not working. He suggested I tell them I'm trying to use Vonage and not Verizon though. Anyway, I'm going to call Comcast tomorrow and provide them the information that I got off the http://8x8.com/Resources/Tools/VoIPTest.aspx site. Not sure if that will help you but I will keep you posted as to what Comcast tells me.

How to connect JVC DVd player and video cassette recorder to QIP 7100 and Panasonic TC-32lx44

What cables do I need to connect my DVD/VCR recorder through my QIP 7100 to see on my TV? I would appreciate any assistance with this since I am a novice.
Thanks
Solved!
Go to Solution.

You cannot run ANY signal through a Set top box to a Television. The only input on the boxes that is actually functional is the coaxial cable. The only way your are going to connect your DVD player to the TV is via one of the AV inputs on the Television itself.
Hopefully your Television has at least 2 sets of AV inputs, because you are going to need them. 1 for the VCR and 1 for the DVD player.
Depending upon the TV, VCR and DVD player, the connections possible are:
1). HDMI cable from TV to DVD if the DVD player has HDMI and the TV has a 2nd HDMI input. It is very unlikely your VCR supports HDMI.
2). Component Video (RGB) plus Audio AV cables from audio and component outputs on the DVD player to a set of component and coresponding audio inputs on the Television. It is unlikely that your VCR supports component video.
3). S-VHS cable from DVD player or VCR to S-VHS input on the TV (if there is one), and audio AV cables from the audio outputs on the DVD/VCR player to the corresponding audio input on the TV for the S-VHS cable. If S-VHS is not available, you can use composite video instead. HDMI and Component video will give you the best picture and composite video will give you the lowest quality picture, but depending upon the equipment, your VCR may not have an S-VHS output available.

Have new Airport Extreme via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicats extender shoul have same name as main network?

Have new Airport Extreme conneted via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicates extender should have same name as main network? How is it best to configure with the Airport Extreme router 802.11ac?

Different names for the 2.4 and 5 GHz networks are optional, but can be convenient for you to distinguish one from another. It's up to you.

I bought the student and teacher version of CS5 extended for windows. Can I download the Mac version to my new apple computer and use the same serial number after removing phtoshop from my PC?

i bought the student and teacher version of CS5 extended for windows. Can I download the Mac version to my new apple computer and use the same serial number after removing phtoshop from my PC?

Can I download the Mac version to my new apple computer and use the same serial number after removing phtoshop from my PC?
Short answer: not for CS5.
Platform swaps are available but only for CS6
Order product | Platform, language swap

Photoshop CS5 Extended for Student and Teacher will not install at all

My copy of Photoshop CS5 Extended for student and teacher edition will not install at all. Please help.

Hi cynthialoudorsey
What is the error you're getting !

I have photoshop cs5 and want the cs5 extended for the 3D option. How do I get that?

I have photoshop cs5 and want the cs5 extended for the 3D option. How do I get that? And whats this Creative cloud crap? I dont keep up new adobe stuff.

I have photoshop cs5 and want the cs5 extended for the 3D option. How do I get that? And whats this Creative cloud crap? I dont keep up new adobe stuff.

Is heap memory is particular for a workprocess?and extended memory too?

Is heap memory is particular for a workprocess?and extended memory too?
All the while I need to know is :is more than one workprocess can be in Priv mode?

Yes - heap is workprocess exclusive memory.
Extended memory is shared on the instance.
Yes - more than one WP can go to PRIV mode.
Markus

Have base station and added extender for downstairrs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. What's wrong? Thanks!!

Have base station and added extender for downstairs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. All i get is a blinking amber light; only get green if I bring it into the same room as the base. Both units are the latest models; purchased 2 months ago. What's wrong? Thanks!!

Power off both the AirPort Extreme and AirPort Express
Wait a minute
Power up the AirPort Extreme and let it run for a few minutes
Now locate the AirPort Express about half way between the AirPort Extreme and the general area where you need more wireless signal coverage, and report on your results.
The more that you can minimize obstructions between the AirPorts like walls, ceilings, etc. the better the wireless will operate.

Sent iphone 5 3x for repair ( 1 repair and 2 replacement ) in a span of 2 months.. And i just ask apple care to extend the warranty of my replacement iphone 5 for 6 month, i mean how can you trust the 2nd replacement if the 1st replacement didnt last long

Sent iphone 5 3x for repair ( 1 repair and 2 replacement ) in a span of 2 months.. And i just ask apple care to extend the warranty of my replacement iphone 5 for 6 month and they reject it, i mean how can you trust the 2nd replacement if the 1st replacement didnt last even for just 1 month? Really dissapointed!!

No, really just want to voice out my dissapointments with apple care.. Im just really ****** off..

Creating WDS for a/b/g AND extended 'n' network..can I do both???

I have finally been able to get my Airport Extreme-n and Airport Express-n setup as a WDS since all of my wireless nodes currently only support a/b/g and i needed to boost my signal in the house. It took quite some time to setup just right, after using this forum, and trail+error / docs. I ended up turning off the 'n' protocol, but maybe did not need too. Now I simply have a 2.4 WDS wireless network established and extended via the AP Express and so far so good.
I see an AppleTV in my future and I will want and need to re-establish the 'n' 5.0 Ghz network and may need to extend the N via my Airport Express too. So, can I do both??? Continue to have the WDS with the APexpress acting as the remote and turn back on the 5.0 ghz network and extend the n to my Express? My only stipulation is that this would be WIRELESSLY extending, not using the AP express ethernet port to connect to my extreme's ethernet port.
I was hoping switching to "802.11n (802.11b/g compatible)” and then enabling the extending feature on both the extreme express would wirelessly extend the .n network, while I can keep the WDS configuration to 'extend' by non-n wireless devices.
Since I have an iMac with n-device, I presume I could try this as a test as well???

Hi Bob, my current configuration is using the WDS option; I have the latest versions of the Dual-band AP Extreme and latest AP Express hardward. I was told that since I had a/b/g nodes, that the only option I had was to create a WDS and have both Airport devices participate in that configuration. I was told specifically in other posts that I could not utilize the "extend a wireless network" feature since this is exclusively for .N devices only and since I have a mixed bag of devices, I had to use the 'Participate in a WDS' configuration.
I did try to use the "extend a wireless" configuration and this would not work well at all. I just dont see getting rid of my a/b/g devices anytime soon.
Should I turn on dual-band N for my Airport Extreme, but not use the "extend a wireless" feature and hope that the 5gzh signal is strong enough to connect to future .N nodes as I obtain them?
Kind regards,
Rob

QIP 7100 2 boxes constantly turning off

I've got 2 QIP 7100 2 boxes
they turn off constantly (go into standby)
this messes with my DVR!
I don't want verizon's DVR, i want my DVR to work. It would work great if the boxes would stay on for more than 30 minutes to 2 hours at a time.
What can be done?
thanks

The only I can suggest is to reboot the STB then go back in and check to make sure the sleep timer is set to never and see what happens.

IR Extender for QIP-7100 (-1 and -2)

Similar Messages

Maybe you are looking for