"IR Hardware Not Detected" message when trying to set up TV on Idea Center A700

When I am trying to set up my computer to get TV from my set top box the computer identifies my signal and shows a small picture of the live TV.  When I click on next I get a message - IR Hardware not detected.  Can someone please tell me to what this refers?  My wireless remote works and the set top box has an IR cable that is only a few feet away.  My TV remote picks it up easily.  Is there more hardware that needs to be bought for the TV to work with this computer?
Thanks,
David

Ok, I have now gotten Reader 10 installed, can open files from my desktop but IE 9 keeps crashing when I try to open PDF files even though I exited and relaunched IE 9.  I did take ownership of all the folders containing Reader 10 and then clicked OK when I got the error notice about the shortcut being installed. I did make a copy of the crash error report and it reads as follows:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 9.0.8112.16421
Application Timestamp: 4d76255d
Fault Module Name: IEFRAME.dll
Fault Module Version: 9.0.8112.16440
Fault Module Timestamp: 4eb319a7
Exception Code: c0000005
Exception Offset: 001b174b
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
Any help is greatly appreciated!

Similar Messages

  • I am getting a Mobile Network Not Available message when trying to make phone calls

    I am getting a Mobile Network Not Available message after phone was drained for a few days. Texting works, internet works, I just cannot make calls.

    Statosphere II
    I've reset most everything, taken out battery/replaced, also set up roaming (all)
    Can't check voicemail either
    Thank you!

  • Error Message when trying to set up wireless security WRT160N

    I recieved the following error message when I tried to set up my wireless security;"Exception has been thrown by the target of an invocation" What does this mean and how do I fix it?

    If you are using LELA delete it from your computer.  It is not needed.  Connect viw your wired computer to 192.168.1.1 username blank password admin (or whatever you made it) and configure your router manually.

  • HT1688 i get an network error message when trying to set up imessage

    I get and "check your network connection" when tryig to set up Imessage.

    Hello ashirdel
    Check out the article below to get Messages activated.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • "Stream not Initialized" message when trying to build Encore project.

    I have been using Adobe Encore CS6 for a while now, using three video camera models.
    9 times out of 10 I have no problems making my DVDs, yet every so often, the video clips will have audio and video of different lengths.
    Whenever this happens, if I try to build the project, I get an error message pop up stating "Stream not initialized".
    I can adjust the clips so that the audio and video are the same length, thus eliminating the tiny, often two frame gap in the timeline, but this only fixes the problem some times.
    Today it isn't fixing the problem at all.
    I've tried transcoding the clips, even though they are in DVD format directly from the camera, yet still get the same error message.
    Any help with this issue would be a god send as it is starting to drive me potty!
    Thanks.

    Giorgio,
    Thanks for the taking the time to respond. Nothing suggested works.
    You suggested: build an image of your author or build the DVD in your HD?
    I tried both and still get "Program Quits" window, with Encore shutting down without any error message.
    You suggested:  disk problem.
    I tried different Sony, and then Verbatim disks. Same problem.
    Additional Project Info:
    Time Line: 1:18:07
    Preferences: Playback Quality: Automatic.
    Disc Info: free space thermometer: Blue all the way across.
    4.7 GB Used.  3.309 MB free.
    Same problem also exists with Premier Pro CS4. PPr will just quit for no reason that is detectable/No error message. I do frequent saves so have not lost anything in PPr, just have to restart program. The problem with PPr is not consistant, whereas with Encore it happens every time when attempting to "Build". I suspect fault is within Encore/PPr  and Win 7 Ultimate 64 bit and latest updates from Microsoft. Both programs ran without problems before. By the way. I tried to update PPr & Encore, and I could not, as I have latest versions.
    By the way....You are writing from Italy? Where? My grandparents came to New York from Italy around 1907.
    Thanks for your effort,
    Tony Salso

  • CONSTANT "Supported Disc Not Available" message when trying to play DVDs

    Does anyone have any idea what the **** is going on with Leopard!? Specifically, whenever I insert a DVD to play it in DVD Player 5.0, i almost always encounter the message "Supported Disc Not Available". At first I thought perhaps it was that I was trying to use some DVD encoded or burned with really new technology or something but then thought that that wouldn't be the problem since Leopard was just released and well after the most recent video DVD formats. Furthermore, the DVDs in question were released years ago. That said, what the **** is going on. I've verified and repaired disk permissions millions of times. I've tried restarting, shutting down and waiting then restarting...nothing seems to help. Can anyone advise?

    Hi everybody, I have experienced that frustration also. I don't clearly know why the message appears, however I know that it happens with discs burnt form a computer (just like ronanocallaghan said). I haven't found a way to solve the precise moment, however THERE IS a way around it. When you open DVD Player instead of clicking on "Play" go to File > Open DVD Media. Once the dialog box appears select the DVD, select the folder inside the DVD most likely called "VIDEO_TS" and click open. This way the DVD Player will successfully find the movie or whatever you are trying to see. I don't know the reason but hey, it works. Another weird thing is that this just happens in the computer because if you try to play it in a DVD it doesn't give not error! Hope it helps and i'll keep finding the reason of why it doesn't work!

  • I am getting a "Prop Res DLL not loaded" message when trying to print from a website only while using Firefox, same does not occur using IE. Any suggestions

    An attempt to change the "Properties" options prior to printing on my Lexmark X5150 causes the message. Same does not occur if I do the same under Internet Explorer.

     I have tried creating the profile again and still get the same problem.  The problem is machine based and not user based. 
    Hi GG1234,
    If you recreated the Outlook profile and still got the same problem, please try to recreate the Windows Profile:
    Log on to client using local admin account->rename the profile folder under c:\users.
    By the way, did you try to print the mails in OWA?
    Frank Wang
    TechNet Subscriber Support
    in forum
    If you have any feedback on our support, please contact
    [email protected]
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • HT201250 I get an error message:  "Could not unmount disc" when trying to set up a new external backup drive

    Trying to back up my mac to update the OS.  Just bought a new external drive, and when launching thru time machine I get the "could not unmount disc" error.   The .dmg (macinstall) quit's unexpectedly too, so I can't launch it either way.

    Hi, what format is it? If already Mac format, likely Spotlight is holding it open, if not you need to format it...
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://Pondini.org/OSX/DU.html

  • Itunes store not available message when trying to play purchased programs

    When I try to play one of the tv series purchased on itunes I get a message 'itunes store not available, try again later'.  All other purchased tv shows and movies play just fine.  Can anyone help?

    I'm having the same problem.  One TV series refuses to stream on the Apple TV, stating the iTunes store is unavailable.  All other purchased content streams fine on the Apple TV.
    I can download the TV series in iTunes on the computer, then stream from the computer to the TV.  That works, but not when streaming directly over the Internet without a computer.
    I have engaged Apple Support, but so far they have been pretty useless in assisting me.  I have sent them screenshots, hand-held videos of the problem, descriptions.   This is insanely frustrating and very disappointing.

  • "device not responding" message when trying to burn in itunes

    when i try to burn a playlist in itunes it starts the process then it goes straight to the finishing stage, then it ejects the cd and says "device not responding properly, cannot restart or restore". can anybody help with this problem. thanks

    i was having the same problem, i read someone's advice in another thread to switch to 16x speed, it worked. it was set at maximum speed by default. very frustrating stuff, i must say. but i still love my mac.

  • HT4108 not authorized message when trying to play a video on the tv?

    does anyone know what to do I purchased the video from i tunes.  I'm trying to play it throuh the ipad to the tv but it won't connect it says not authorized?

    Were these songs purchased using another account?
    " I opened a new iTunes account and copied the files to the new account.  "
    Do you mean to a new library?
    Account is a user neame and password with which you purchase content.
    A library is your collection of media.

  • Not delivered message when trying to send a message

    I know the phone number is correct...Just won't deliver...using the "message" icon

    Try sending it as a regular text message... turn off iMessage.

  • Number not recognized message when trying to call ...

    I renewed my subscription on 3/27/13. I just bought a new computer with Windows 8 on it. I have been able to call the UK before on my old computer but now every time I try the UK number it says either "Call Failed" or "This number is not recognized." Please help. Thank you.

    I have the same problem. I can call from the U.S to many numbers in the U.K, but one cousin's is "not recognized". That number does work from a normal phone.

  • Error message when trying to set up shared printer

    I can't seem to add my ancient agfa imagesetter to my list of printers. The rip software is running on an old mac running system 9. I've tried typing in the printer's IP address, but that doesn't work either.
    So I thought I could work around that by sharing the printer from my G5 which is running system 10.4. So Mountain Lion now sees my agfa in the shared printer list, but when I go to add it, the error message is "Unable to download the software from the server at this time."
    My best guess would be an issue with sharing permissions, but I am open for suggestions. I can't add any of the printers from the shared printer list, so it is not my agfa that is the problem with my workaround solution, it is a "sharing" problem with my G5.
    Ideally, I'd like to print directly to my old rip, but if I can't, if anyone can help me solve the "sharing" puzzle, I would greatly appreciate it!!

    If you are using LELA delete it from your computer.  It is not needed.  Connect viw your wired computer to 192.168.1.1 username blank password admin (or whatever you made it) and configure your router manually.

  • Strange message when trying to run program from outside IDE

    my java code runs fine from within borlands jbuilder IDE, but when i try to execute it from the command prompt i get an error message as follows.
    registry key 'software \javasoft\java run time envirnment \current version ' has value '1.4' but '1.2' is required
    does anybody know what this is about. all im doing is going to the directory i have my class files in then executing
    java program_name

    It sounds like you're running th 1.2 JVM on a machine that has a 1.4 JVM installed. Try using the java.exe command that was installed for 1.4 to run your application.

Maybe you are looking for