IR OCE Error

I create a IR OCE to connection Essbase in Essbase server.
To Get essbase error1030724.
I used IR OCE connection to Essbase also get the same error.
But I create a IR oce to connection Essbase in remote environment,did get any error.

This error means: Error 1030724 - Failed to set locale information
This means there's an error in the setup of the local machine or it doesn't match the server locale info. Check what differences there are in the setup to the remote machine and update.

Similar Messages

  • Server Error [2018] while trying to connect Essbase via OCE-file

    <p>Hi,</p><p> </p><p>I've created the BQY file which connects to the Essbase server.It works under the Client. However, when I try to use it on theserver (e.g. Web Client) I get error like "Failed to acquireData Access Service with data sources that match the specifiedOCE".</p><p>I've already imported the OCE file to the Workspace andconfigured as is should be.</p><p> </p><p>Any idea, what might cause the error?</p><p> </p><p>With best regards,</p><p>mar</p><p> </p><p>P.S. I'm using Hyperion System 9 BI+ version 9.2.0.2</p>

    <p>Other than instaling the client, you have to setup essbase asdata source on the server. I dont remember the exact location butits the same place where other relational data sources are definedin one of the administrative settings page.</p>

  • Acrobat generates error when printer selected. Occurs with Oce printer

    "Microsoft Visuall C++
    This Application has requested the Runtime to terminate in an unusual way"
    This pops up whenever a user selects the Oce printer in the Print screen. Is there a fix for this?

    Hi OBTwo, and a warm welcome to the forums!
    That's the conversion process of PostScript to PDF in...
    /usr/libexec/cups/filter/
    It can have many causes, like damaged filters there, permissions, etc.
    One possible way around it until you can find a fix is to Print as a PDF, or saving it as a PDF and printing from Preview in OSX.

  • Error in data template while using database function

    Hi,
    I have created a datatemplate in BI Publisher with the following code.
    <dataTemplate name = "AuditReport" dataSourceRef = "pg">
    <dataQuery>
    <sqlStatement>
    SELECT b.*,s.audit_table_name,s.audit_operation,s.AUDIT_TIME_STAMP
    FROM bi_audit_records b,sys_audit s
    where b.AUDIT_ID=s.AUDIT_ID
    </sqlStatement>
    </dataQuery>
    <dataTrigger name="beforeReport" source="fn_audit_data(to_date('2010-04-01','yyyy-mm-dd'),to_date('2010-04-02','yyyy-mm-dd'),'ADMIN')"/>
    </dataTemplate>
    But when I try to view this, I am getting the following error.
    A name was started with an invalid character.
    Error processing resource 'http://<system name>:9704/xmlpserver/servlet/xdo'. ...

    Hi,
    This issue is related Oracle database issue, check with Basis/Dba team. Oce they resolved you can run the report with selections.
    If you know the table name you can check in SE14 (Data base Utility) and adjust the table. Some times it will work out.
    Hope it helps you.
    Riyez

  • Interactive reporting : error while refreshing MSSQL data in Workspace

    Hi all,
    I recently work with Hyperion and I am facing an issue that makes me crazy.
    My configuration is simple :
    - 1 win2003 server with Hyperion Interactive Reporting services and workspace installed (both works properly)
    - 1 winXP machine with MS Sql Server 2005
    - My dev PC an winXP with IR studio.
    I created an IR report with a MSSQL query that retrieves data into a Table.
    The report is displayed properly and the data is OK.
    When I refresh the data in IR studio, everything is OK.
    I import the OCE file into the the workspace, following by the BQY file.
    The report is displayed properly in workspace with the correct data.
    I change the data in the MSSQL server and I try to refresh the report in the workspace.
    So, I open the report in the workspace and I click on the refresh button.
    But when I do that, I get an error message.
    I read somewhere that we have to configure the DAS.
    I assume that the configuration is made via the Administer/Database connection management (sorry if names are not correct, but I have a french version).
    But when I try to add a new connection, I have only 4 choices for the type of database : Essabse, Financial Management, Planning and SAP BW.... No MSSQL Server.
    I hope that anyone among you can help me, but anyway, thanks for reading my post.

    You need to enter DATABASE details in DAS (Data Access Services) by running Service Configurator.
    Then run Remote and Local Service configurator to enter database details.
    ##I assume that the configuration is made via the Administer/Database connection management (sorry if names are not correct, but I have a french version).
    This is something related to Financial Reporting.
    Hope this helps.
    Regards,
    Manmohan Sharma

  • Error while migrating repository files from Brio to Interactive reporting

    Hi,
    I am doing migration of Brio from 8.3.1 to Hyperion Interactive Reporting version 11.1.2.1. I am referring http://docs.oracle.com/cd/E12825_01/epm.111/hs_migration.pdf
    I am facing error when I am migrating resitory files from brio 8 to Interactive reporting version11 environment.
    Error [[ENOENT]] Accessing path: /c2cnas/Oracle/Hyperion_Home/EPMSystem11R1/products/biplus/opencat
    when I checked at my Linux server I do not see "opencat" directory under /c2cnas/Oracle/Hyperion_Home/EPMSystem11R1/products/biplus path. I don't know why this directory or folder was missed after Hyperion Interactive Reporting Installation. Do we need to create this folder manually for newer versions( 11.x)?
    Has anyone aware of this error? will it impact my migration? I am thinking that migration utility is looking to place .oce files in this directory but it could not find. is my understanding correct?
    Please help me on this.

    Usually in 11.1.2.1 the folder will be  "EPMSystem11R1\products\biplus\data\Open Catalog Extensions"
    I haven't seen a opencat folder.
    Can you check the migration logs.Also check permission for the user on the folders.
    Thanks,
    KK

  • Blue screen error nightmare!!

     :agrees:hi can anybody help me with my problem regarding with my video card...my video card is MSI nvidia NX6600 512mb DRR2 PCI-E SLi,i installed Prince of Persia: the two thrones..when i run the game suddenly blue screen appreared,error in my nv4.dll then it starts to dump then my PC restarted...can anyone plzz. help me to get rid of this error and play the POP3 normaly..thankz more power!!!

    Yup like what Bosskiller say need more informations of your current rig including the PSU and bios revision so others could help you!! What drivers version are you using right now?  Tried to used the version 8 as it much more stabile rather version 9. ALso tried to rised the PCi-e bus in the Bios to 104Mhz. Any ocing on your current rig as well as GPU? Gd luck.

  • Error during installing of OATS 9.3 and OAT db config is not opening

    Hi ,
    When i was installing OATS 9.3 i am getting this error
    "Error in Writing to File
    c:\OracleATS\jdk\jre\bin\awt.dll (The process cannot access the file because it is being used by another process)
    I ignored this error .
    Oce the install is completed ,i tried to open Oracle Application Testing Database Configuration it didn't open and gave this message
    "error could not open file C:\OracleATS\jdk\jre\lib\i386\jvm.cfg "
    Can you please advice me on this
    Regards
    Sridhar

    Proper clean fresh ATS install:
    Step1: Deinstall ATS products
    Setup.bat to launch "Oracle Universal Installer"
    Click "Deinstall Products". Inventory Window opens.
    Expand the tree Oracle Homes -> Check "OATS" checkbox. Click Remove.
    Remove window opens and start uninstallation. Wait for the dialog to automatically dismiss itself.
    After the successful uninstalltion, you will see "There are no installed products" in the Inventory window.
    Click "Close" to close the Inventory Window.
    Click "Cancel" to close the Oracle Universal Installer
    Step2: Uninstall Oracle XE database
    Control Panel -> Program and Features. Find and select Oracle Database 10g Express Edition
    Click "Uninstall/Change" button from the tool bar, or dbl click the item to lauch the installsheild wizard.
    Click "Yes" on the pop up dialog. Wait for the unistallation to complete.
    Upon successful uninstalltion, window shows "Uninstall Complete" in the screen.
    Click "Finish" to close the install shield wizard
    Step3: Remove/Rename the following folders.
    Backup the script directory
    Remove/Rename ATS install directory (e.g. C:\OracleATS).
    Remove/Rename the directory: C:\Documents and Settings\username\osworkspace
    (depends on your Operating System, it may look like: C:\Users\username\osworkspace)
    Remove/Rename the directory: C:\Program Files\Oracle\Inventory
    ( depends on your Operating System, it may look like: C:\Program Files (x86)\Oracle\Inventory)
    C:\Windows\rsw.ini
    Step4: Remove the Services (Optional)
    Start -> Run. Enter "cmd" Type the command: sc delete servicename
    eloadAgentMon
    Oracle Application Testing Suite Application Service
    If you see a msg "The specified services does not exist as an installed services" returned from the program, the service has successfully removed by the previous steps.
    Step5: Remove the Registry Keys (Optional)
    Start -> Run. Enter "regedit" to launch Registry Editor. Remove the keys below:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle Application Testing Suite Application Services
    HKEY_LOCAL_MACHINE\Software\Oracle\Oracle Application Testing Suite and Oracle Test Management
    If you do not find the keys they are successfully removed by the previous steps. Note: The keys may be found in the different location depends on your Operating Systems. (search by the key to find the correct location)
    Step6: Restart your System (Optional)
    Not required, but always a better practice
    Step7: Install ATS
    1. Make sure the install user has administrator privilege on the system.
    2. Double click the setup.bat to start the Oracle Universal Installer.
    Important: Windows Vista, 2008 or Win7 users, select"Run as Administrator" from the right mouse click menu. This is required process for the OS that has UAC enabled.
    3. Continue to install the latest version of ATS

  • How to get .oce to talk to DAS & bring back data in Interactive Reporting?

    Hi Hyperion Experts,
    This is also a fairly basic question, I use Hyperion 9.3.1 and I have Shared Services, Workspace and Interactive Reporting Studio running on our Windows 2003 Server.
    My goal is to import a .bqy document I created in Interactive Reporting Studio into workspace, and be able to click on the "refresh" button and see it refreshes the data from the backend Oracle 10g database.
    I have completed the following steps so far,
    1. I have created a DSN. This DSN, named "Oracle 10g Data Source", when I clicked on "Test Connection" button, It ran successfully.
    2. I have created a new Datasource entry in the DAS service. If I double click on the newly created Datasource entry, the screen would display the following details.
    Connectivity Type = Oracle Net
    Database Type = Oracle
    Enter the name of the Data source = Oracle 10g Data Source
    Select the name of the Data source (it is grayed out, nothing selected)
    Server/File (it is grayed out, nothing entered)
    then, followed by some default connection parameters.
    3. I have created a "Oracle 10g Data Source.oce" file using the Interactive Reporting Studio. I saved the .oce file at
    C:\Hyperion\BIPlus\data\Open Catalog Extensions\Oracle 10g Data Source.oce
    4. I created a new constrProj_Oracle10gOCE.bqy, during the creation, I chose
    "Create a new document with Recent Database Connection File" option, then I chose the Oracle 10g Data Source.oce that I have created in step 3. After I log in with host user/password, I have created a data model and I see that it brings back a data set when I clicked on the "process" button. I saved this .bqy document.
    5.
    I imported the Oracle 10g Data Source.oce and constrProj_Oracle10gOCE.bqy into the workspace under a folder called
    Root/MYBI/Test
    6. I right click on the constrProj_Oracle10gOCE.bqy document, and chose "Open". It opened with Results section highlighted on the left hand side, and with data showing on the right hand side. However, when I clicked on the "refresh" button, I'd get a message box with a red X. It says,
    An Interactive Reporting Service error has occurred -
    Failed to acquire requested service.
    (2001)
    I guess the data I see in this constrProj_Oracle10gOCE.bqy was just the cached data that was brought back when I hit the process button of this .bqy when it was first created in the Studio, and that it never established any connection via the DAS service to the backend.
    Could someone please show me what I have done wrong here?
    thanks,
    hypuser1010

    EricaHarris,
    Yes, the issue is still open. Obviously, I have gone down the path of "Scenario One".
    Based on your reply, I have done the following.
    There are three things I am configuring here: DSN, DAS and OCE.
    1) When I created the DSN,
    I started the ODBC Data Source Administrator, Click on second tab "System DSN". I added a new ODBC Data Source.
    Data Source Name = Oracle 10g Data Source
    TNS Service Name = //146-abc.xyz.com:1521/MYORCL0617
    2) I re-created the DAS entry, per your suggestion, I made sure that "the name of the data source will be the host name you specified in your OCE".
    Connectivity Type = Oracle Net
    Database Type = Oracle
    Enter the name of the data source= //146-abc.xyz.com:1521/MYORCL0617
    3) for my OCE, I specified
    Connection Software = Oracle Net
    type of Database = Oracle
    on the first screen.
    then, on the next screen, I specified
    Host = //146-abc.xyz.com:1521/MYORCL0617
    I reployed the OCE, the .bqy document and restarted DAS. Yes, my .bqy document does refresh its data successfully from the backend.
    However, I am not 100% convinced that the .bqy uses the OCE which talks to the DAS, which talks to the DSN entry and brings data back to the .bqy document.
    Here is what I did,
    I opened up the DSN entry, changed the TNS Service Name from //146-abc.xyz.com:1521/MYORCL0617 to
    //146-abc.xyz.com:1521/NONSENSE. I then restarted DAS and redeployed the .bqy document. the .bqy document is still able to refresh its data. So, I have just proven that the .bqy document does not need a valid DSN entry to work, how come??
    Can you (or anyone) please explain the phenomenon that I see?
    Also, a very basic question. you know that when you create a .bqy in the Studio, you "import" an OCE into the .bqy document so that the .bqy knows that it should use this OCE to talk to the backend data source. but, when you deploy this .bqy in workspace, how does the .bqy know that it is supposed to go through DAS (and DSN) to interact with the database, rather than the "internal" OCE that was pre-built with this .bqy?
    thanks,
    hypuser1010

  • Error when connecting to DB2/AS400 as a Datasource

    Hi All,
    I have an issue when connecting to DB2/AS400 as w datasource with IR studio. I am able to create an OCE but when click on tables it throws an error saying ""INFORMATIC.DM3601PF" is an undefined name. SQLSTATEB704
    sqlstate = 42S02
    The drivers I used is the drivers provided by the IBM DB2 and also the Merant drivers provided for Hyperion by DB2. I used ODBC/DB2, ODBC/ODBC, ODBC/AS400 connection while creating an OCE but it did not help.
    The exact version of the database is DB V5R4--AS400--OS. It is a 64 bit client.
    Can anyone help!!!
    Thanks,
    Sree

    Hi,
    Connecting Hyperion with DB2 is simple. When we install DB2 client on the machine it adds a new entry in ODBC drivers, using that DB2 Driver create a system DSN by selecting the appropriate DB. Give the proper credentials.
    Now open Hyperion IR select new Database option...Select ODBC/DB2 and choose the DSN name given by you while creating the system DSN. give the correct credentials to connect to DB.
    After that it will ask for OCE creation...just create oce by giving app name and you are done with the connection.

  • Listner error

    HI,
    i have a linux test machine in which i have installed oracle 9.2.0.6.
    suddenly i am getting error
    Log messages written to d:\oracle\ora92\network\log\listener.log
    Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=VALUED-CB7D4C82)(P
    ORT=1521)))
    TNS-12532: TNS:invalid argument
    TNS-12560: TNSrotocol adapter error
    TNS-00502: Invalid argument
    32-bit Windows Error: 22: Invalid argument
    i deleted the listner and recreated it ,then also i got the same error.
    can anyone help me regarding this.
    thanks in advance,
    kishore.

    Hi,
    from metalink
    TNS-12532 TNS-12560 TNS-00502 Errors Starting The 9i R2 TNS Listener [ID 380506.1]
    Solution
    1. Recreate the sqlnet.ora file manually or using NetCA or NetMgr.
    -- Save the sqlnet.ora file.
    2. Start the TNS Listener(s).
    3. Verify the Oracle Net connectivity by using both tnsping and connecting with remote application(s).
    Regards,
    Tomas Solar
    Oracle ACE, OCE, OCP, OCA
    Oracle Approved Trainer
    http://www.OracleDBA.cz
    http://www.AskTom.cz

  • Error Photoshop can only decode FAX encoded images

    I've been using an OCE flatbed scanner to digitise large documents. The software scans and saves the files as .tiffs with an LZW compression.
    Using Photoshop CS3, I was able to open the files and correct the pixel ration. But, after trying to open the files with Photoshop CS5, I get an error message reading 'Photoshop can only decode FAX encoded images up to 32767 pixels wide or tall'. Seeing that CS3 opened them with no problem, is there any way to get CS5 to open them? They aren't CCITT compressed, so I'm not exactly sure why the FAX encoded error comes up...

    They vary in size from around 150 KB to 2 MBs.
    One file, for example, is 196 KB with dimensions 37795 x 22746 pixels.

  • Error when process an Interactive Reporting Query  - EPM 11

    Hi everyone...
    We are on EPM 11.1.2 working with Interactive Reporting
    I already submitted a SR with Oracle, with this problem that I describe on the next lines:
    If I open a document and then try to process the Query (Essbase/Oracle datasource). It throws the next error message…
    *[2018]: "Failed to acquire Data Access Service with data sources that match the specified OCE";*
    If try Again (like 1, 2, or 3 times) without close the document … then the query process responds without problem.
    If I try to process the query again (without close the document)… eventually it throws me the same error.
    Why sometimes makes the connection with the values configured and sometimes throws the error ?
    Any clue, about the origin of this problem... or some tests to discard some kind of configuration
    Note:
    - The connections are already configure in DAS, and in some time it works well
    - We have 2 DAS Services running on my environment (with the same values ) created at the beginning to work as a cluster.
    Regards
    Alberto Martínez

    Yes I did.
    I have written the code as given below. It is not working either. Can you please check my code.
    DATA:
          FM_NAME TYPE RS38L_FNAM,
          FP_DOCPARAMS      TYPE SFPDOCPARAMS,
          FP_OUTPUTPARAMS   TYPE SFPOUTPUTPARAMS.
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-getpdf = 'X'.
    CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
    ie_outputparams = fp_outputparams
    EXCEPTIONS
    cancel = 1
    usage_error = 2
    system_error = 3
    internal_error = 4
    OTHERS = 5.
    Get the name of the generated function module
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
    i_name = 'ZHR_APPT'
    IMPORTING
    e_funcname = fm_name.
    Set form language and country (->form locale)
    fp_docparams-langu = 'E'.
    fp_docparams-country = 'US'.
    fp_docparams-fillable = 'X'.
    call the generated function module
    CALL FUNCTION FM_NAME
        EXPORTING
          /1BCDWB/DOCPARAMS        = FP_DOCPARAMS
          T_HR                     = wa_emphr1
       IMPORTING
        /1BCDWB/FORMOUTPUT       =
        EXCEPTIONS
          USAGE_ERROR           = 1
          SYSTEM_ERROR          = 2
          INTERNAL_ERROR           = 3.
    Thx,
    John

  • Getting Error code 2001 in Hyperion Workspace 11.1.1.2

    Hi,
    I have installed a Hyperion 11.1.1.2 setup with Sharedservice, Workspace and Reporting and Analysis services. I have a BQY dashboard, which contacts the database server from Workspace.
    In the Workspace Service Configurator, I am not able to see 'Local Service Configurator' link which used to be in 9.3.1. Is this removed?
    Then I defined my data source, in RSC - Remote Service Configurator, by logging in as localhost and User/pass.
    But even on setting this and restarting, republishing the dashboard and oce connection file, when I hit refresh button to refresh the data in the dashboard, still I am getting the error:
    "An Interactive Reporting Service error has occurred - Failed to acquire requested service. Error Code : 2001"
    Is there anything changed in 11.1.1.2?
    Anyways to check the configuration, see more logs where it is failing?
    Any suggestions to resolve this will be really helpful.
    Thanks in Advance!
    Sriram

    Hi Gerd,
    Thanks so much for that pointer. I started the Workspace UI Agent and accessed the URL: http://<machine URL>:55000/cmc and in the DAS service added my database connectivity.
    It worked!
    Thanks Again!
    Sriram

  • Need Help on Troubleshooting IR Error: Failed to acquire access to database

    Hi there,
    I have been struggling with the following error "Failed to acquire access to database" and ODBC driver error "Data source name not found and no default driver specified" when opening an IR document for a few weeks.
    The IR document uses an oce file called ABC.oce and DAS has been configured accordingly.
    ODBC System Data Source called ABC created on server running IR DAS as follows:
    - Driver: Oracle in OraClient11g_home1
    - TNS entry: ABC
    - Connection tested successfully;
    IR DAS entry ABC created as follows:
    - Connectivity Type: ODBC
    - Database Type: Oracle
    - Hostname: ABC
    oce file called ABC.ore created as follows:
    Interactive Reporting Database Connection
    Connection Software: ODBC
    Database: ORA8
    Host: ABC
    Username and password have been entered in the oce file as well.
    What possibly have I missed?
    Any help will be highly appreciated.

    Are you using the Hyperion ODBC drivers which comes with the Hyperion installation?

Maybe you are looking for