IR Report Group by issue

Hi,
I have application built in Oracle Apex 4.1.
It has several Interactive Reports.
IR having functions like Sort, Filter, Grouping etc.
All these are working fine except Group By function.
I can select Group by function, even select column and function like sum/count in group by.
But when I pressed 'Ok', I can't see the report with Group by function implemented.
Screen remains as it is and Function-Group by dialogue box remains opened.
Can anyone tell me about this issue.
about Image -
When I pressed "Uitvoeren" i.e. "Apply". Nothing happens. Apex Version is 4.1.1.
This is happening with all IR reports of my application.
Thanks.

user4485817 wrote:
Hi,
I have application built in Oracle Apex 4.1.
It has several Interactive Reports.
IR having functions like Sort, Filter, Grouping etc.
All these are working fine except Group By function.
I can select Group by function, even select column and function like sum/count in group by.
But when I pressed 'Ok', I can't see the report with Group by function implemented.
Screen remains as it is and Function-Group by dialogue box remains opened.What browser are you using? and check your browser console it must be failing with a JavaScript error
Can anyone tell me about this issue.
about Image -What image?
When I pressed "Uitvoeren" i.e. "Apply". Nothing happens. Apex Version is 4.1.1.
This is happening with all IR reports of my application.

Similar Messages

  • Report Group Issue

    Hi,
    We have a report group 1AIP, the report generated using this report query has variant in the test system but the same is not there in the validation system(next to the test system).
    When investigated the report inside the report group is same 1AIP-001, but the way it is generated in the test system is through GR33 whereas in validation system is GRR3. Can some one tell why the variants are missing! and why the reports inside the report group is different?
    Note: The description of report group between the Test and validation is different.

    It is not possible to add aggregated calculated fileds like count, countdistinct in a bar chart view's calculation tab. I don't know how you did it. Can you give the next step that you did after choosing Group by as type.
    Anyway, I tried the same thing with updating ordered list and found that for the third calculation (Count(number)/CountDistinct(user)), the result is 1 and 3 (it should have been 1.5), so there is certainly some problem.
    Once you give me the steps on how you created Count, CountDistinct calculated fields and added those in the bar chart, and after I can reproduce, we can file a bug/SR.
    Thanks,
    Vishal
    BAM Dev

  • Main Reports' Group Tree doesn't retain last record selected

    In Crystal 2008 Viewer, when you click one of the last tree nodes on a long Group Tree, the program jumps to that part of the report for that group.  But when you return to the Main report tab the Group Tree pane returns to the top.
    According to my users, previous Crystal versions used to outline the previously selected tree node and keep that section in the left pane, so the user could see where they just were.
    This partially works in the Crystal 2008 Developer version.  If I preview the report and drill down with the group tree, the Preview tab's group tree pane stays in place.  I do not, however, have any outline or indication of what group was just selected.
    I found this in the help text: "For longer reports or reports in which you wish to jump back and forth between different groups, the smart navigation features of the Group Tree make your work extremely efficient."  For the users to jump back and forth efficiently they need the Main Reports' group tree to remember the general location from which they came (at a minimum) AND/OR the previously drilled record also be highlighted/outlined (at best).

    Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

  • Report Painter - Report group doesnot exist

    Hello Expert
    I have done the development of new report and report groups through report painter. I did the assignment of report to report group, Also i could able to access the report through T.Code GR53 / GR55 codes.
    I have done the Generate report option (Shift +F8) option through T.Code GR52 -> got the message that " Report group ZXXX has been generated". Also did the " Mass generator " and no error are found.
    I could able to assign the T.Code through SE93 in my development client. I did the trasnport the development to Unit Testing Server.
    In Testing Server, if i try to use the T.Code ... i am getting the message as " Report Group does not exist with message number - GR409. Even thou, i am able to access the report and report group directly through GR53 / GR55.
    Kindly guide me, is there any step i have missed ?
    Regards
    Anil Kumar

    Hello Eli
    Thanks for your reply,
    I did the Mass Generator option in "TEST System" also.
    I am not getting any error message & all are in "green color"
    Still i am getting the same message " Report Group Does n't Exist"
    Kindly guide to me over come the issue
    Regards
    Anil Kumar

  • *Maximum report in one report group (report painter)*

    Hi SAP Experts,
    I'm doing some job on report painter, issue on this is the number of reports in one report group,because in my case I can only insert 7 reports in one report group. Is there any possible way to extend the maximum report allowed in one report group? I'm new in our SAP group & this is my first time to do job in report painter . .
    Help from you experts would be highly appreciated. .
    Thanks.  .God Bless. .

    Hi Krishma,
    You can save this workbook to your PC and email it to your user. They need to open the workbook (with Bex running in Excel). When they click the refresh button they system will prompt them to log on (if they are already not logged in) and then the queries will be executed.
    Hope this helps...

  • Report group and report library does not exist

    Dear Guru's
    We are not able to execute the report S_ALR_87013019 in production. After doing analyses, we came to know that library 602 & report group 6OBU does not exist in production, and hence we are not able to excute this report.
    We have to tried to import from client  '000' from transaction code GR59, But in that we are not getting 6OBU report group.
    Please help us to resolve the issue, as we required this report on priority basis.

    Dear Prashant,
    Thanks for your reply.
    The solution given by you is to transport the report library from Dev Client. But our client does not transaport the reports in production system.
    Is ther any other solution to retrieve the library.
    Thanks
    Varsha

  • About report groups and read programs for the object EC_PCA_SUM

    Hi Friends,
    Hope every one is doing well..!
    I've an issue with the report groups and read programs for the object EC_PCA_SUM. As we know that the report groups and read programs available for this object in the application customizing are used to analys the archived data.
    That is these programs comes into picture after the archiving operation.
    For more information, you can visit the below web site:
    [http://help.sap.com/erp2005_ehp_03/helpdata/EN/e4/69f353b75a11d1b5850000e82debc6/frameset.htm]
    Now, my question is how would I check the code for these analysing programs available for this object. I can't see this in SE38.
    Thanks to reply for this..
    Full marks will be awarded.
    Regards,
    Shamim

    Hi Lakshman,
    Thanks for the reply.
    Hi Deiter,
    You're right.
    Your provided transaction "GR55" helped me to find out the program name for a particular group. However, these are just Write and Painter reports.
    But can you please let me know the functionality of these report groups ?? what are these used for ???
    Do we have these programs for other archiving objects like CO_ITEM,CO_ML_BEL,MM_MATBEL,CO_ORDER,
    PP_PLAN,PP_BKFLUSH ??
    More points will be awarded.
    Thanks a lot.
    Regards,
    Shamim
    Edited by: S H A M I M on Sep 19, 2008 3:19 PM

  • Is there a way to improve the performance of a report group?

    Hi gurus,
    Is there a way to improve the performance of a report group? 
    Points will be given later....
    Thanks!

    Hi there,
    Thank you for your response. I thought there's no answer for this issue and planning to change it to ALV.
    I looked at the codes and debugged it. After the select statement from ZZUWT table (customized), there's a loop that takes much time (10-12mins) for 1000 records. and several nested perform routines. It's a standard program so I'm hesitant to edit it.
    I'll be checking on the primary keys. If it's ok, may I ask for your assistance in this part? Though I'm not that familiar and haven't tried creating a report painter before.
    Thanks anyway...:D

  • Slow performance of a Report Group

    Hi guys,
    Is it possible to improve the performance of a report group? I haven't tried creating report painter, writer.. Should I go on the list of reports and check each in the report painter or in report writer? And what's the first thing that I should check in the exisitng report?
    Points will be given...
    Thanks,
    Maui

    Hi Sridhar,
    Currently, the characterisitics define in the GDS of our report group are (1)Ledger, (2)Actual Period and (3)Version.
    On the case you had resolved, what was the arrangement in the GDS before and when you said "All RE objects were assigned to profit center in their master data"? And what does it look like after you fixed it or how is the arrangement in the GDS?
    Thanks again!
    Another thing I recognized during the execution from the progress bar, it takes a minute to read the records, then 4mins to process then 4mins to read and 2 mins to process...I was wondering processing is something to do with the computation of the key figures... I didn't create the whole report group so I'm clueless with this issue.
    Help me
    Edited by: maui bayog on Feb 27, 2008 7:28 PM

  • Security for report group 6OBU (transaction S_ALR_87013019)

    I have a situation where a user with access to the transaction S_ALR_87013019, does not return any data during execution. Another user with much lesser access can return data with the same selection criteria.
    A security trace doesn't display any authorization failure. I believe there is a user exit EXIT_SAPFGRWS_001 which can be used to add some extra security for this report group but its not implemented.
    Are there any special user specific configurations which control display of data for this report?

    Hi Aninda,
    I agree. Authorization trace might not be appropriate in this situation.
    Also, user parameters are only to pass on specific values, such as company code, default layout etc and doesn't restrict the user from viewing a report.
    As mentioned in my earlier reply, the issue could be with a user exit where the user ID should be maintained in a table or the restriction is applied at the table level.
    The other issue could be with the version of SAP GUI. You may ask the user who has issue with viewing the report to login on a different system to identify if the issue is with the authorizations or the SAP GUI.
    Hope this helps!!
    Regards,
    Raghu

  • Warning: There is no reporting group defined with a purpose of iRecruitment

    Hi,
    When i try to generate the offer letter in iRecruitment, i am getting the warning: There is no reporting group defined with a purpose of iRecruitment in "Enter compensation" Screen. However i am able to generate the offer letter,preview and submit the offer letter. I have referred the Article [ID 1168832.1] in oracle support. It suggest me to give the Temporary Directory file name using XML Publisher Administrator , but still the Warning appears.
    STEPS
    The issue can be reproduced at will with the following steps:
    1. From Vacancy Search page, select applicant.
    2. Create Offer: Enter Basic Details.
    3. Warning: There is no reporting group defined with a purpose of iRecruitment for this business group.
    4. Review page.
    Version Details: Oracle Applications : 12.1.2
    But still the offer letter is generated.
    Can anyone advice me to over come this warning
    Regards
    Suraysh

    I have the same behavior too. Looking at the iRecruitment implementation guide, I see reporting groups defined there.
    1) Select your HRMS Superuser responsibility
    2) Go to Total Compensation : General Definitions : Additional Setup : Reporting Groups
    If you see no data, it's likely you have ... no reporting groups.
    I think this time the error is pointing you in the right direction.
    I hope this helps.

  • Crystal Reports grouping limits different then tree or tab menu limits...

    <p>Hi,</p><p>This may not be the forum for this, but I figured that if I am trying to make a treemenu function as a replacement for the group tree in CR that it is somewhat relevant...</p><p>I got a production system to run a test and it seems that the Crystal reports group tree control can easily display 3000+ items, no errors, warnings or any other abnormal behaviours. Why would it be possible for this to work, and not have that many elements in a treemenu or tabmenu without the page size limits? I&#39;ve already discovered that in my case I need to break up the levels into smaller strings, but the page size becomes an issue. There are no ways that i have found to duplicate the group tree functionality with that many levels. Even the largest page size cannot display 3000+ items that I have been able to find.</p><p>Thanks for any help you can give. </p><p>&#160;</p><p>&#160;</p>

    <p>this will work for viewing only in boe or in the crystal reports designer...</p><li>In Enterprise (CMC), navigate to the report you&#39;ve just uploaded </li><li>From the process tab, select &#39;Print Setup&#39; </li><li>In the &#39;Set the report&#39;s page layout&#39; section, select the &#39;Custom Settings&#39; option. </li><li>Choose a Height and Width for the report (for example - 40inches width, 10 inches high). </li><li>Click Update. </li><li>Go to the History tab and Click Run Now (assuming the report you&#39;ve built doesn&#39;t have a massive quantity of data) </li><li>You should now be viewing your report with the screenspace chosen (40 inchs wide) - <em>From the viewer</em>, export the report to RPT and save it to your desktop. </li><li>Open the report in Crystal Reports and you will have the report with custom page settings to work with. </li>

  • Analyzer: Copying Report Groups

    Hi All,<BR><BR>Just trying to figure out how to copy report groups. History: We're in the process of creating a number of analyzer screens for a range of users. One of the issues being we only want them to have a drop down for their cost centres. At the moment they can see all the members in the Cost Centre Dimension when we only want them to see their group. Any thoughts, we're running Analyzer 7.0.1.<BR><BR>Thanks in advance.<BR><BR>Mark

    <p>Hello,</p><p> </p><p>I too have a situation like this. We can do the export &import but I was wondering if we can automate this process somehow?like I have atleast 200 groups and in this situation, importing& exporting doesnt seem pretty and efficient. Any ideas how wecan work this out?????????</p>

  • Error in generating a report group in Report Painter

    Hi,
    I created a report in SAP report painter using transaction code GRR2. I attached the report to an existing group ( 15 reports already in the group), when I generate the group in transaction code GR55 thereu2019s an error message u201CSyntax error in GP40V42F6QG4OQVI4Q93F6FE3QK500, row 97,644 (-> long text)u201D. Please help me on this error.
    Thanks,
    Louie

    There's no error when I generate the same report in a new created  group as well as when I generate the existting report group without the new created report.
    Information on where terminated
        The termination occurred in the ABAP program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
         in "FILL_RANGES_FROM_SET".
        The main program was "GP40V42ERDE7HBU91TXFAHVA6B0500 ".
        The termination occurred in line 92457 of the source code of the (Include)
         program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
        of the source code of program "GP40V42F6QG4OQVI4Q93F6FE3QK500" (when calling
         the editor 924570).
    Louie

  • Report Group in  Report Painter

    In my <b>report group</b> there are many reports .
    Now i need to give a transaction code to my <b>report group</b>.
    Then which report will execute by the transaction code

    Hi
    To create a Transaction Code for a Report Painter/report writer report
    Tcode for Report Painter
    To create a TCode, follow the steps below.
    1) Go to Transaction code SE93, Enter TCode Name and Press Create.
    2) Give short Description and select Parameter Transaction, Press Enter
    3) Select Transation Radio Button and write START_REPORT in the next text
    box Also Check the box Skip Initial Screen.
    4) On the bottom of Screen (default Values), Enter Parameters
    i) Name = D_SREPOVARI-REPORTTYPE. Value = RW
    ii) Name = D_SREPOVARI-REPORT Value = Your Report Group Name (Say 1SIP)
    5) Save and Execute.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

Maybe you are looking for

  • How to replace double quotes with a single quote in a string ?

    Hi All: Can some one tell me how to replace double Quote (") in a string with a single quote (') ? I tried to use REPLACE function, but I couldn;t get it worked. My example is SELECT REPLACE('STN. "A"', '"', ''') FROM Dual --This one throws an error

  • Mod_jk load error with Apache on OS X

    Hello - I have been running CF9 on OS X with a MacPorts install of Apache 2.2.21 with no issues as a "standalone" server installation. To get ready for CF10 I have ben trying to get CF10 configured with Apache. The specefic error I am getting when la

  • Table J_1FVSCORE has no authorization problem

    Hi I am in a project where we will create .PAT files thru T code SSDC and SSDA  For that we have installed Additional AAK Tool 4.0 in our SAP server,  after installing AAK Tool 4.0 I have certain additional tables. We have a problem in one of the add

  • Information on SAP: ERP 2004 ECC Component

    Hi All, We are performing a Pilot Project for one of our client, by integrating and harnessing the functionalities of technologies like SAP: Netweaver Portal (GUI), SAP: Exchange Infrastructure (Middleware), Manufacturing Execution System (MES) along

  • How can I stop iTunes from prompting me for my password every time I open it?

    Every time I open iTunes I am prompted four times to enter my Apple ID password. Now I know that this is because I have automatic downloads enabled but it never used to do this when I had iTunes 11, only happened since I've had iTunes 12. Short of tu