IR sensor worked last week, but not now.
I did have Plex installed and that had been taking over my infrared signals to the point which I could not control anything else. I tried installing remote buddy so that I could use the apple remote to control vlc. This didn't work either until I renamed my plex folder located in application support, even after turning the remote input off in the Plex settings. Anyway, after everything working fine for about two weeks, now all of a sudden the remote will not work. I have tested on a macbook and it works fine, have tried it with remote buddy while off and then while on, and it does show up under usb under system profiler so I know the IR sensor is at least still recognized by the system. It also no longer shows a remote as being paired in sys preferences > security, which is a new development, and it also will not allow me to successfully re-pair the remote. Is there any way to find out which programs are actively using the IR sensor, or any way to test it's functionality? I am under the assumption that if it shows up in sys profiler than it is most likely a software issue. I tried creating a new user, but unfortunately I apparently had installed quite a few programs for all users, so it doesn't really give me a clean slate for testing. Any new ideas are much appreciated.
Output from aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 0: CMI8738-MC6 [C-Media PCI DAC/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 1: CMI8738-MC6 [C-Media PCI 2nd DAC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 2: CMI8738-MC6 [C-Media PCI IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'm using the C-media card
My only success with passthrough today was with the xbmc live cd, I haven't had any success with killing pulseaudio either? I'v tried pasuspender which seems to temporarily disable pulseaudio however no succes. I also found this on the pulseaudio mailing list https://tango.0pointer.de/pipermail/pul … 05179.html
Any ideas?
Many thanks Sigurd
Similar Messages
-
Some websites keep asking to enable cookies in my browser when they are and I can't get this sites to see that, they worked fine yesterday but not now. I've restarted the browser, restarted the computer, disabled then enabled cookies in the privacy settings and still nothing. Any help?
Hi,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
I used to be able to print from the browser, specifically Amazon...hit print and I would get the print/preview from windows. In IE it worked perfectly, but IE start messing up and grinding to halt, taking MINUTES to load a page, like dial-up!
Firefox is fast and runs great....just cant PRINT..grr.
also... noticed that i am unable to read my online paper now. Paper will open, i can read the full page view, but when I try to hit a particular article to enlarge in another popup window, nothing happens. perhaps a security something preventing popups? but there is no option to do otherwise.
again, was able to read articles in IE.
Am I missing an add-on?I too developed the same problem about 2 weeks ago. First in Safari then Firefox. I have 2 printers, one local and one networked (different brands etc). Neither browser will print ANYTHING from the web to either printer. Jobs are not stuck in queu - goes to printer but just spits out blank paper. Not even email. No pop-ups involved (like the usps site). Not website specific. All other applications on the machine print perfectly to both printers.
-
I have a MacBook Air and for what ever reason the print settings for envelopes and normal A4 paper size changed from printing correctly each time I wished to print. Now, each time I wish to print either, I have to rest paper size and or Envelope vertical or horizontal. Can anyone assist with how to reset in order to print correctly without the need to rest each time please?
Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode. -
Hi all,
My iWeb 08 publishes to my web space within my mobile me package. After the change to me from .mac, I stopped using my @mac e-mail address and have started using @me instead. Further following a few issues when updating web galleries I decided to delete my published web site from Apples servers and re-publish it to mobile me. This has all worked fine apart from my google analytics. I deleted the html code, set up a new web address within my google account and copied and pasted the code into a fresh html snippet within iWeb. Once published the whole site works apart from info being sent to google for my analytics. Is there something different I need to do to get it working again? We move house at the weekend and I'm not sure when we shall have broadband set back up - therefore I'd like to be able to get stats on my sites visitors when web access is back available.
All help very much appreciated.
TimThis may be the solution - will have to wait until tomorrow to see if it has worked - I found these:
http://www.apple.com/downloads/macosx/automator/addgoogleanalyticsaction.html
http://echoone.com/automator/google-analytics/GoogleAnalytics/Google_Analytics.h tml
Tim -
The Google calendar's information is accurately saved on our end on this sample page.
Works for me on Linux.
You can try http://kb.mozillazine.org/Time_and_time_zone_settings -
I PURCHASED A NEW PHONE LAST WEEK BUT NOT ABLE TO SINC SONGS WHICH WERE NOT PURCHASED FROM I TUNE- HELP
Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
As IO said before:
You can redownload most iTunes pruchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
I do not think it included audio books. -
My computer won't play videos from site like the Daily Show and the CW, but they stopped working last week. I have the newest version of Adobe player. Anyone know why the full videos will not play?
I failed to mention that the sound does play on the videos that are not playing.
-
I bought an app last week but they have not took the money out of bank or sent me a receipt for the app so now i cannot update any apps or download any free apps even though i have money waiting in my account for them to take it. Please help how can i sort this out??
Help!!!
-
My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.
Hello wilsontot_too,
Thank you for the details of the issue you are experiencing on your iPhone. It sounds like you are not noticing transparency on your iPhone. It may be that you have "Increase Contrast" turned on in your iPhone settings.
I recommend verifying that Increase Contrast is turned off in Settings>General>Accessibility.
iPhone User Guide - Large, bold, and high-contrast text
http://help.apple.com/iphone/7/#/iph73b89c6
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)
Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it
-
Trying to play playlist on Apple TV. It worked at one time, but not now. Home sharing is on, on the computer; but apple TV keeps asking me to turn home sharing on.
What gives?Hello hobartco,
Home sharing will, indeed, need to be set up on your Apple TV, as well.
Setting up Home Sharing for Apple TV (2nd generation and 3rd generation)
http://support.apple.com/kb/HT4352
Cheers,
Allen -
I am constantly doing a restore to get my contacts back (have now restored 7 times over the last week) but they keep disappearing for no apparent reason. Help!?!?
Has this happened to anyone else? It's just happened AGAIN this morning!!! I am OVER it!!!!
-
No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?
Thanks, RobFirst off did you go to System Preferences > Sound > Output > And is the correct output selected?
Any red light coming out of the headphone jack? If so, you'll need to re-set the little switch in there by inserting a 3.5mm jack carefully in & out 20 odd times. Or grab a toothpick (non-conductive) and a flashlight.
Tried anything else that produces a sound? On restart do you get the chime? Perhaps check into Audio Midi Setup to ensure your output is selected correctly using the cog at the bottom left. -
I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved one.
Had the same problem and the same message -- was suddenly unable to access icloud apps on my pc, also using Windows 7 and Internet Explorer. After several days of pulling my hair out, decided to try a different browser and was able to get in by using Firefox instead of Internet Explorer. Hope this helps.
Maybe you are looking for
-
My Adobe CC apps no longer work at all (Windows 8) - they just crash
I successfully used Adobe Photoshop and Premiere Pro on my laptop (which uses Windows 8) for a full year. Creative Cloud version. While it wasn't ideal, and some day I will switch to a Mac, I was able to get the job done. Two months ago, Premiere Pro
-
Instalation Problems (10.3.8 to 10.3.9)
Im trying to update 10.3.8 to 10.3.9, but im unable to. I downloaded the 10.3.9 update for this site, went through all the steps, but in the "installation" step, the instalation stopped. Its telling me "there were errors installing this software".I l
-
How to restrict bidders must response for all items?
hi experts we used SRM7.0 with Standalone Scenario. we need to restrict the bidder response for all items. in RFx items tab page, there is a checkbox 'RFX response Required for All items'. but it is doesn't work for this purpose. If the bidder
-
Find an ipad and dont know what to do.
Hi i find an ipad and want to return to his owner but it has password. I don't know what to do... Police... is not an option in Argentina. What can i do?
-
hi everybody i am working in as2 under flash cs3 aon windows xp i develop an audio player which can play dynamic audio files of two formats "mp3" and "swf" from remote servers.. The issue is when i embed the player in html and make it live to access