IRecovery: who is it for? how to use it?

Is this something that jailbreaks your phone?
I've tried downloading the downloads that it says to for a windows computer but when i go to open them to "unzip" them it asks for which program to use.
What do i do?

Hi Ria,
From what I understand, you cannot use JOINS with FOR ALL ENTRIES in 4.5b & lower versions. In general the SELECT..FOR ALL ENTRIES statement has been in use from 3.1i versions. For more information, PL take a look at OSS Note #652634.
Regards,
Suresh Datti

Similar Messages

I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less

I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less complicated than the Premier Pro that I use. The program works perfectly, except for one thing.... when adding a title to the short video sequence we are working with, if I use a particular font (Metallophile Sp8) which I obtained from my Adobe Typekit, it crashes the program,.... all other fonts work perfectly....can anybody help me please?

clivephoto
What computer operating system is your Premiere Elements 13 running on? And what video card/graphics card does this computer use?
From your description, can I assume that this Mettallophile Sp8 font is being recognized by Premiere Elements 13 to the extent
that it can be seen and remains seen in Titler's list of font choices - even after the crashes?
If you opened a new project, imported nothing, and created a text title in the Titler with this Mettallophile Sp8 font, does the program crash?
Please review the following which discuss fonts and Premiere Elements and determine if anything in it helps.
Fonts & Crashes with Titler
Let us start here and then decide what next.
ATR

Who can tell me how to use ni-imaq functions imgSessionSerialWrite and imgSessionSerialRead to set and get my carema attribute?

Who can tell me how to use ni-imaq functions imgSessionSerialFlash,imgSessionSerialWrite and imgSessionSerialRead to set and get my carema attribute?
My camera is duncantech ms3100 and the frame grabber is pci-1428.I use ni-imaq2.6.When I use these functions,it tell me error -1074397163(IMG_ERR_BINT:Bad interface) .

I have the same problem on my IPAD 2. One calender that i cant delete or find any settings for... Its just in the calender app under diffrent calenders. how do i delete it?

Who can tell me how to use the transction "KKRC"?

who can tell me how to use the transction "KKRC"?
Please explain me all the steps to be required.
Thanks in advance!

hi..
http://help.sap.com/bp_bl603/BBLibrary/Documentation/181_BPP_EN_BR.doc
KKBC HOE Transaction code Error
Regards

Who has figured out how to use a print server with LR 2.1?

Who has figured out how to use a print server with LR 2.1?
Mac OS 10.4.11, G5 2.3 dual, 8 GB RAM. PS CS 3 Dual monitors
Print server is Mac G4 dual 533 (audio)
Epson Pro 9600 and Epson R2400 Both are connect by USB. Could be connected with FW 400.
I can use a print server with PS However color management does not come through when using a print server and LR. Image prints, but color horrendous.
All custom .icc profiles are on both the G5 and the print server, G4 dual 533 (audio)

Hi,
Based on my research, if we want to filter events based on user name, we need to edit the XML query.
Please refer to this blog below:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Best Regards,
Amy

Document for HOW TO use RSRT1 or RSRT2 ?

please advise where can I get document for HOW TO use RSRT1 or RSRT2 ?

hi,
RSRT1 &RSRT2 will take you to report monitor.
check the link from sap.help:
http://help.sap.com/saphelp_nw70/helpdata/en/a0/2a183d30805c59e10000000a114084/frameset.htm
cheers
Sunil

HT200246 I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE. HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE. HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

There are a number of resources. You might want to start with:
The User Manual:
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/
This Thread:
https://discussions.apple.com/message/22833760#22833760
or just do a google search, that should bring up plenty of tutorials from around the web.
Cheers!

Sample for how to use DirLstWrite

I am looking for a sample how to use DirLstWrite. I took a DIAdem training course at the end of March in Michigan for 5 days, my teacher's name is David xxx. He supposes to send me an exsample. I have not received it. Does anyone know his email? My email is [email protected]

Hello,
I don't know who the person was that was teaching the class in Michigan, but here is an example of how to use the DirLstWrite command in DIAdem:
Call DirLstWrite("C:\Datafiles","Test*.dat","filename","test.lst",0)
Here is a description of the different items that this command is made off:
Call - VBS function, calls a DIAdem function
DirLstWrite - Command for storing file names in an ASCII file
"C:\Datafiles" - Directory in which to search for the data files that need to be put into the LST file
"Test*.dat" - Parameter to describe the file name(s) that need to be put into the LST file
"filename" - Parameter that determines how the results will be sorted in the LST file (by file name, by file leng
th, by extension, by date/time of creation)
"test.lst" - name of the LST file
0 - Parameter that determines if the files found with the DirLstWrite function will be added to an exisitng list file or put into a new file (if a file of the same name already exists, it will be overwritten)
The result of the above example will be this:
Test1.dat
Test12.dat
TestA.dat
TestC.dat
I hope this helps. Please let me know if you need additional information.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Need documents for how to use OAM for APPS DBAs

Hi All,
Need documents/pdfs, how to use OAM for APPS DBAs.
Thanks a lot in advance

Hi,
For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
For 11i version pls chk :
Oracle Applications System Administrator's Guide - Configuration (zipped) B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
--Rk

HT4539 i want to by an ebook in Greek for How to Use the MacOS Lion but i want to download it on a mac book pro 10.7.4 will i be able to read it????

i want to by an ebook in Greek from iTunes explaning the use for the Lion,but iam not sure if ill be able to read it on my Mac book pro 10.7.4 can you help me with an answer?????

You would have to change the iTunes country in order to download the eBook in Greek, but there's a problem with that.
Your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
Keep in mind, iBooks available from the iTunes store cannot be used on your Mac. Two different operating systems. iOS vs Mac OS X.

Who can tell me how to use JACOB? Thanks

Now ,I want to use a com written by visual c++ 6.0 in my java application.
Com information:
Name:JacobTest
One of its' s methods:void StopCurrentJob();
I wrote the following code to call the method StopCurrentJob():
import com.jacob.com.*;
import com.jacob.activeX.*;
public class JacobTest
public void stopCurrentJob()
ActiveXComponent JobCom = new ActiveXComponent"clsid:9005ADDA-2E61-46BC-B88F-9A2E9B6F0C38");
System.err.println("begin");
//Dispatch.call(JobCOm,"StopCurrentJob");
JobCom.invoke("StopCurrentJob");
System.err.println("end");
But the above code cannot work well.When the another application which written by Visual C++6.0 can stop the specified job successfully by call the method StopCurrentJob () directly.
Thanks.

I suggest you try google, 688K hits for
http://www.google.co.uk/search?q=java+JACOB

Who can tell me how to use the FM "SSF_FUNCTION_MODULE_NAME"?

I wants to known the FM "SSF_FUNCTION_MODULE_NAME" in every detail and particular.
it would be best show me a demo.
thanks very much !

Hi,
PARAMETERS:
P_FORM TYPE TDSFNAME. " ------> This parameter is for passing the smartform name
DATA:
FM_NAME TYPE RS38L_FNAM." -----------> This will get the function module name of the smartform
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME           = P_FORM
IMPORTING
    FM_NAME            = FM_NAME
EXCEPTIONS
    NO_FORM            = 1
    NO_FUNCTION_MODULE = 2
    OTHERS             = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
" This function module is called with the Function module of the smart form when there are no FORM
" interface parameters declared, if you have any form interface parameters those cannot be passed through
" this function module
CALL FUNCTION FM_NAME
* EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
" when you have any form interface parameters defined in the smartform then you should call the
" function module of the smart form and remove the function module name give the parameter
" FM_NAME to it so you call the smart form through the smartform name
regards
sarves

Instruction for how to use the dirver for a look in amplifier

Hello,
I have downloaded an AMETEK SIGNAL RECOVERY (Formerly EG&G/PerkinElmer Instruments) LabView Driver Software for SIGNAL
RECOVERY Lock-in Amplifiers Models 5109 and 5110 form www.signalrecovery.com
I would like to know if support materials for the driver. i can not make it run with my computer
Thank you very much.
Best regards,
Fabio Vigliotti

Hi Fabio,
You may want to contact AMETEK about this driver. I will only be able to help you minimally.
But if you describe what is going on, I can do my best to help you out.
Best Regards,
Aaron K.
Application Engineer
National Instruments

Who can tech me how to use i message

find friends whit iMessage?

Have a look here.
iOS: Using Messages - Support - Apple
Messages only works with with other iOS devices and Mac computers running Mavericks or Mountain Lion. The user that you want to message with, must be set up and registered to use Messages on their device before you will be able to text with them.
Message was edited by: Demo

How to use copy default values for material from vendor master in Account Group

Dear all:
In define AccountGroup for vendor ,there is a field named DURAS which means default values,who can tell me how to use it?
Any informations are appreciated!

Hi Katherine,
I have tried using default value as B in the customizing
If i maintain default values in the vendor master record, it will automatically adopt in the purchase info record.
Here i tried using sales person & telephone no field in vendor master record & it automatically adopts to purchase info record.
Region sales person and telephone no i have maintained in vendor master record, it automatically fetches to info record for the particular account group. I am not sure if there is any relation between vendor master and material master record.
Regards
Subbu.

IRecovery: who is it for? how to use it?

Similar Messages

Maybe you are looking for