IReport and JRHtmlExporter : Problem in reloading images
Hello
I have created the report with IReport and exported to the HTML format.
The problem is when i reload my webpage , in backend error is shown that "Cannot write to image files".
Does that mean when i refresh the page stream is still writing the images.
If any one have any clue, plz reply....
Thanks.
hi professor
i tried formatting my MMC card after taking the back up.the pop msg said that all data would be lost and then i pressed yes to it.but even after that all the data is still there in the card and i m not able to delete the images and video from there.
secondly i changed my camera settings and instead of saving the images and video in the MMC card i changed the setting to phone memory and this time the image got saved easily and i can preview it also...
so i think the MMC card is gone...but its only 1 month since i had been using this cell...wat a pitty
cheers
sid
Similar Messages
-
I have format plug in and i need to reload image after saving it. How can i do it?
You could have an automation plug-in listening for your save and then close and reopen the file. You cannot open a file during a save operation directly from a file format plug-in.
-
Has anyone experienced this before ? I have previously been able to crop images with no problem. Recently when I open an image and crop it and confirm the action the image 'disappears' If I save and go to reopen the file is there but it will be zero meg in size.
Hi,
Try resetting the crop tool.
To the right of the tool option bar, click on the little horizontal lines and you should see reset tool option.
Good luck
Brian -
I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!
I'm on a Macbook Pro and all of my software is up-to-date.
The photos and events, etc. appear to be present in my photo library, but I cannot see the actual images--only an outlined placeholder.Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take 3 or 4 goes to work.
-
I am importing videos from my canon sl1 to my macbook air when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item ‘MVI_1040'' Thanks in advance
Can you access the images on the phone with Image Capture (in the Applications Folder) ?
-
I am having a problem importing my images into Aperture 3 from my Nikon D800E. The images appear as if red paint was splashed across the sky. The Nikon software used to transfer from the camera does not show this problem and Photoshop 6 is fine with the images exported as jpg from the Nikon software. Aperature does not even like the jpg images usable by Photoshop. I am suspecting that Aperture is not correctly using the camera raw file. Also, the histograms are radically different between the corrupted images and the Photoshop (good) versions. Aperture worked just fine for me in June with the same camera. All drivers and software are current as of this posting. Anyone else out there seen this before??
Are you sure you do not have Highlight Hot & Cold Areas turned on? (View->Highlight Hot & Cold Areas)?
The bug in Digital Camera raw only affected Raw images. In your first post you wrote:
Aperature does not even like the jpg images usable by Photoshop
If the JPG's have the same problem then it isn't this bug.
regards -
Template Problem: Tiling background image gone and duplicate .swf headers
Problem 1: I have been working with a template, and creating
new files from the template without incident. Recently I created a
new file from the template and found that the tiling background
image (dots appearing on the right and left of the page) was gone.
The tiling image is present in the template, but not in files
created from it. Any guess how I broke that?
Problem 2: In my template I have an editable region wherein I
can place a .swf animation. When I upload my page made from the
template, a pair of .swfs appear stacked on top of each other, not
just the single .swf graphic. Any guess what I am doing wrong
there?
The problem page can be viewed here (
Shop
Page), and the template files are located here (
Template
right-click and Save-As).
I appreciate any help you can offer.
*Using Dreamweaver CS3 on Mac OS 10.5.2> Regarding that tiling image problem? the image in my
template file has a
> relative address, but when I make a new file from the
template the
> location of
> the image is absolute, and points at my computer.
This will ALWAYS happen when one of the following obtains:
1. The linked file is OUTSIDE the root of the current site.
2. DW *THINKS* that the linked file is OUTSIDE the root of
the current site
(how could this happen? Here's a for example - the path to
the root folder
looks like this -
C:\whatever\joe's files\blah blah blah\thefilename.jpg
Fix either of those issues, and the problem will go away.
Might that be your problem?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"adam@blueapplestudio" <[email protected]>
wrote in message
news:fuo8dk$8sh$[email protected]..
> Thanks to the newsgroup users who have helped out with
this. I will be
> getting
> a newsreader soon, as the Adobe forum seems to be a bit
flawed.
>
> Regarding that tiling image problem? the image in my
template file has a
> relative address, but when I make a new file from the
template the
> location of
> the image is absolute, and points at my computer. This
seems to fix it:
>
> Open the template and make a new file from the template.
> Make a minor change to the template, save, and update
all linked files.
> Undo the change just made to the template, save and
update again.
>
> If you look at the new file-from-template you will find
the file needs to
> be
> saved (as denoted by the asterisk by its name) and the
tiling background
> is now
> corrected.
>
> -
IMAGE DISSAPPEARS AND SELECTING PROBLEMS.
Hi,
i recently purchased the photoshop Cs6 from a store, the student version.
i have it downloaded on my comptuer and everything's fine however when i start editing a photo, half of the photo actually dissappears like it has been cropped out, so when i save it and reopen it, half my image is removed. Also when i unlock the layer to start editing it, it disappears?
Also when i select a photo it will unselect it straight way.
im not sure if because of my computer or somethings wrong with the photoshop i purchased.
if someone could get back to me asap as i need to start editing things for my art for hsc.
thank you!okay so it just stuffed up again, the image is appearing but its still being randomly cropped out, ill attach an image, do you think doing what you said before will still help?
-
Serious and Sudden Problem with Z10 NEED HELP PLEASE
I have a z10, one of the first that came out in Toronto (if it makes a
difference), a couple of hours ago I came across a serious and sudden
problem.
I was able to swipe left and right between pages of apps, even drop down
from the top, but I cannot open anything, not even make a call or settings
options.
Any time I try to, for a split second it looks like its about to load
something then nothing. (image slides to the right quickly and goes back on
every attempt)
So I first did a reset, same problem, then I did a battery pull (about 15 minutes) and problem presisted.
I tried through USB to do a backup on blackberry manager and perhaps do a
re-install of everything, however when I was prompted for the password of
my device on my PC it kept telling me it was an incorrect password (I use
this blackberry on my computer 4-7 days a week, twice a day sometimes for a
year and I have never miss typed my password nor have i changed it)
After trying everything to make sure the first letter maybe was upper/lower
case, even my other possible phone password, nothing worked..
On the 5th failed attempt my phone prompted me to type 'blackberry', which
i did, then i typed my password on my phone which i type in about 15 times
a day becuase I set my phone to a 5 minute lock and still said it was incorrect.... I am no on 9/10 attempts and lost
for options.
Please if anyone can give me any suggestions, or even how to backup my phone
and whipe it now, or I have an earlier backup form 4 months ago that I
wouldnt mind going back to in worst case scenario.
Thank you for your help in advance,
Solved!
Go to Solution.Sorry, no I haven't experienced that. It could be from an app you downloaded but that's just a guess. Wiping the device will tell us a lot. If the device still doesn't work you'll want to reload the OS using BB Link. if it still doesn't work after that then warranty support will be necessary through Rogers.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
A few selection of websites after fully loading become blank and start an infinite loop of loading. I reinstalled firefox once already and the problem persists. What can I do?
Sorry I do not know what the problem may be. <br />
If no-one comes up with better ideas of what causes this then my questions and suggestions:
What do you mean by an infinite loop ? <br />
The page loads and then goes blank. What exactly happens next, does the page fully load and fully display again before going blank, and repeat this cycle endlessly in the same tab.
You do say the problem persisted in safe-mode and you had looked at the basic troubleshooting article. Buy that you can stop the problem by disabling javascript.
* did you disable all plugins - and did you still get the problem then ?
As you mention disabling javascript stops the problem, have you tried with<br /> Java script enabled but
* block popups ON
* load images automatically OFF
* advanced options - ALL OFF<br /> What happens do you get the problem then or not.
While on this firefox site if I look at the error console Ctrl+Sift+J or Tools -> Error console If I clear the console content and reload the webpage the error console shows only a couple of messages. YouTube home page give a lot of yellow triangle warnings about 200, but no red warnings, do you get red warnings.
You could also try on the problem sites eg YouTube changing the permissions with tools -> Page Info | Permissions
Did you try the Basic Troubeshooting suggestion of making a new profile. (Heeding the warning not to delete settings, otherwise you loose all bookmarks etc) did that help ? -
IPhoto 08 contact print problems - after 5 images. prints pt a screenshot
iPhoto 08 contact print problems - after 5 images. prints pt a screenshot
Okay - So, I teach photography and have my students print contact sheets from iPhoto version 08. I have one student (out of forty) having the following problem (I have removed preferences, reinstalled iPhoto, used the iPhoto updater for 7.1.5, reloading the printer driver and upgrading the system software to 10.6.8 {I teach in a high school, so no funds for newer software})
The problem is isolated to one student - the others on the same machine do NOT have the same problem. When this student selects more than 5 images, the resulting output looks as if he has taken a screen shot - the palettes on the left of the frame show and the titles he has inserted (using Batch Change) are moved on to the pictures.
At this point, I am going to let him screenshot his submissions, just wondering if anyone else has had this problem.
Thanks!
Sandy Snyder -
Hello Folks, I have a link problem.
It is when you go to this page
> http://www.laurarealm.com/Illustrator.html click on the media projector image the image is missing. I tried several hours of fixes and nothing has worked. Tried the obvious, reloading image file to remote images folder. Tried re-naming file because it had _, and numbers in it. Looked at properties and it had been an .ai file and so I removed it's title. removed links and re-linked. looked at code and cleaned up some html and xhtml using the DW tools.
Nada.
Thanks for your help.The naming structure using underscores "_" and numbers is not bad practice but rather good practice as opposed to using spaces or other special characters.
The images seem to be loading fine for me (Firefox 5), but I have to ask if that is the best way to show the image to your user because you basically send them to the image. You would be better to load the full image on one of your pages just to keep the theme of your site and navigation so that the user does not feel stranded once they click on the link. Even looking into a gallery script may be worthwhile. -
Google Maps Reloading Images even after completed
Hi, my Maps on iPad 64GB #G + Wifi is acting strange. It keeps reloading images from maps even after it has been loaded infinitely.
I've made a video of what's happening.
www.youtube.com/watch?v=TLLfUZKNTi8
anyone knows what's causing this?Having the EXACT SAME PROBLEM here. Appears this is a widespread problem but difficult to find any information on. Seems this may have to do with Google's latest api implementation relaease and a conflict with Safari.
Another issue that I have had and looking through Google and Apple forums seems to be other are having this also is, in ability to zoom in or out after a map does maage to load. First the flicker problem now seems to be EVERY TIME i go into maps. It was or seemed to be an intermittent problem but no longer. When I was able to load a page I often could not ZOOM IN or OUT. I thought this had to do with my connection but have read other have the same issue and it was when connected to a perfect 3G or WiFi signal.
My info is as such;
1. Ipad 64gb w/3G
2. This Ipad is not Jailbroken
3. Running 4.2.1
4. Problem occurs when connected via WiFi and 3G
5. No other apps running in background (or at least not initiated by me. I have not tried turning off push notifications).
Here are some links I have found related to what seems to be this issue.
https://groups.google.com/group/google-maps-js-api-v3/browse_thread/thread/b61c3 036e50e61dd/2ae820adcd2cc9ea?lnk=gst&q=googlemaps+ipadapi#2ae820adcd2cc9ea
https://groups.google.com/group/google-maps-js-api-v3/browse_thread/thread/ddf9c 314bfdadafe/a386f55d6e9ac474?lnk=gst&q=googlemaps+ipadapi#a386f55d6e9ac474
4. -
I use AOL mail - http://www.aol.com/ with my Firefox 6.1 browser. Before updating aol mail worked great with firefox for years. Now when I try to send ( upload) messages with a file or images I always get the reading " there was a technical problem and I should try again". Messages with NO files or images go through just fine. I have cleared the Firefox history, the cache and cookies and the problem remained the same. The question is does this problem have something to do with the latest update ? AOL are still only familar with the 3.6 Firefox versions. Thanks
Well I guess I was too optimistic. Since last posting I have had three hang events, one during reboot. When the login dialog box came up I clicked on it and it hung.
However I do have a new data point. I have enabled the remote login (sshd). I have discovered that when the system hangs like I described above, I can still log in via SSH from my Windows system. The shell appears normal, but when I tried a "killall Safari" command the OS crashed hard. After a hard reset, the system hung during the login process. Again I could login remotely, and that time I executed a "sudo reboot" via the remote session. That cleared the display to all-blue but did not successfully reboot.
Can anyone suggest what to try via the remote login to help diagnose what is happening? I am familiar with typical Linux architecture but the differences in Mac OS X are leaving me a bit disoriented. -
One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone else sends me) I can't view the images. They are all blank white squares. This started a few weeks ago. Why can't I view Picasa link images through Mail?
What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!
Maybe you are looking for
-
I have a first generation apple TV. recently I have rto change from HDMI input to my TV to a component imput. Now my apple tv will not rememebr my sertver password or apple ID which I have to re-enter everytime I use Apple tv which is annoying; how c
-
Hi can anyone help please, my iPhone 5 was reset by mistake and now my music will not download to it even though it was bought from iTunes, i purchased another song with my iphone5 and it won't download ether to my phone but has downloaded to my ipad
-
Home Sharing issues with iPhone 6 Plus
Hi guys, I'm having problems with streaming music and video on my iPhone 6 plus from my Macbook Pro (mid 2010 model) using iTunes' Home Sharing . I am able to stream without any issues using my iPhone 4S and my Apple TV, however. I am using iTunes ve
-
Ever since the implementation of the release procedure, a non-reproducible error sporadically occurred in IDOCs from type ORDERS. However, we are not sure that this procedure is the reason for the error. Error: The WE is missing at the item level. (A
-
Anyone have a pointer to relevant documentation to let me modify the font.properties font file mappings under PJ?