IReport for NetBeans 6 using EJBQL, help-me?
Hello,
I got the new iReport plugin...
I have some problem to add a connection..
I created 2 entities using JPA...
the both is working fine:D
later I try to use a ireport file...
but i have no success to add a new connection. and I put in previwe mode:
it says "Error filling print... No Persistence provider for EntityManager named HsqlProjectPU"
but I start the project it work fine... and show the report empty... cuz I couldnt put the fields
how can I fix it ?
greeting
I got the same problem.
I can't even create the connection...
Did-you solve the problem? How?
Thanks.
Similar Messages
-
Cheap Nokia vs. iPhone 3GS or 4? For very day use? Help wanted!
I own and use an iPod Touch 2G. I was all set to get an iPhone 3GS or 4 to replace it (giving me a good quality camera, cell phone service, GPS, compass, etc.), when it suddenly occurred to me that I'm pretty rough on my cell phone.
I have a old beater of a cell phone (Nokia). It's a small, flip phone, with a hard exterior, that's been dropped, taken a beating, and yet keeps on ticking. I use it in the rain, put it in my pants pockets even with keys, pens, and coines, walk across pavement with it w/o fear of dropping it, toss it on the front seat of the car as a reminder to call spouse once I've arrived at a destination, etc. It doesn't matter if it gets all scratched up. (Even with a screen protector on it, the tiny little screen is all scratched up. But no matter, all I use that for is to see the numbers I type in.) In short, I don't have to give it a mind and I know that if it goes South, I can simply buy another one for $20-30 from AT&T.
When I suddenly realized this the other day, I thought that maybe the iPhone (at much more $$) really wasn't for me. That it might not fit such an attitude or approach to a cell phone.
I'm sure that others have made a similar transition, however. What did you all do to overcome the "just toss it anywhere" approach? What do you all do to protect your iPhone, or to avoid disasters, and not worry about the sundry disasters that can strike it?Just a quick update with a couple more details before I go to work:
I left my phone plugged into the wall charger all night long but the Apple logo is still blinking on and off. However, when unplugged from the charger, the screen goes blank and the unit does not respond to pressing/holding the buttons at all. Likewise, flipping the mute switch does not cause the phone to vibrate as it normally would, which made me wonder if power was being disrupted somewhere else in the unit before the battery. I just finished disassembling the unit down to the battery, looked for any loose connections etc., and did spot a suspicious looking spot on top of the #5 ribbon connector that I had not taken notice of before in my first disassembly. I'll take a picture of it and post a link for your consideration later on today when I have a spare moment, although I fear the worst. -
Is it possible to create dynamic reports using iReports in netbeans ?
Hi
I want to know that is it possible to create dynamic reports using netbeans? Dynamic reports means based on user selection(for eg. say by selecting values from combo boxes) some query will be genatated and fetch the query result from data base and displayed results in iReports only my problem is i am working on Netbeans IDE and i have installed iReports as plugins in netbeans IDE. and i am not able to find any tutorial that show me how to work with iReports under netbeans IDE. and how to create dynamic reports in iReports. If u know any such tutorial then can you send me link plz...!
ThanksWhat do you mean by "in Start Menu"? Do you mean Live tile? See https://msdn.microsoft.com/en-us/library/windows/apps/hh465403.aspx
https://msdn.microsoft.com/en-us/library/windows/apps/dn468032.aspx
Best Regards,
Please remember to mark the replies as answers if they help -
Considering dumping my iMac for a PC used for DSLR video editing on Premiere CS6. Help!
So I edit mostly 1080p DSLR footage taken from my canon T3i camera. I purchased a 2011 (the latest model) iMac a little over a year ago, upgraded the RAM to 12GB and it has worked reasonably well. I purchased the base model for $1200 which has a quad core i5 processor, 512mb of video ram, and a measly 500gb hard drive. The past couple of days I have come to the realization that I only use Adobe Programs for graphically intensive work (premiere, after effects, etc). I originally bought my iMac for final cut, but FCPX SUCKS and I switched to Premiere CS6 which works like a dream. Anyways, I'm a senior in high school and do lots of video editing (going to major in video production in college). I'm likely going to differ college for a year and continue my video production business (pretty informal) as well as video production internships at a couple companies (so don't suggest that I get a laptop for portability, not an issue). I just shot an entire wedding with 2 DSLR's and the footage takes up over 20% of my hard drive which is unacceptable. This is very troublesome for me and has been clogging up my computer considerably. I have realized it would make a lot of sense to sell my iMac and purchase a PC that's not only faster, but has much more space. I was ideally looking to sell my iMac for $1000, and from that get a better and faster PC setup for my video editing. $200 would be allocated for a 24" 1080p LED 5ms Asus monitor (from newegg) which would leave $800 remaining for the PC. Ideally it'd be nice to have a little cash left over. Some things that sound appealing to me are: an intel i7 quad core proccessor at least 3.0+ Ghz, 16 GB of ram (maybe 8 to start), 1 GB of video RAM (here is where I'm stuck, my Imac had a Radeon 512mb video card in it, but I've heard premiere runs especially well with nVidia CUDA cards? Don't really know too much about this stuff.) I have no idea what type of card to get, and if I would even see a performance upgrade from my iMac. For storage I'd like at least 2TB of space, should I get two seperate 1 TB drives? One for boot and software and another for video files? Anyways, I assume I can benefit from selling my 2011 i5 iMac to get a faster PC equivalent at a lower price since I mainly edit videos (which is pretty graphically intense) from an HD DSLR camera. I've noticed premiere rendering times on my mac are starting to get pretty slow these days. Ideally it'd be nice to buy a desktop (already assembled) maybe from HP for around $600 (not including the monitor). I'm not completely against building a PC from parts (since I know a friend who can do it for me) I just need help figuring out WHAT exactly it is that I need and would benefit from.
Buy a Desktop Video Editing PC
http://www.adkvideoediting.com/
-ADK Kudos http://forums.adobe.com/thread/877201
Build a Desktop Video Editing PC
-http://ppbm7.com/index.php/intro-part-1
-http://forums.adobe.com/thread/1098759
-http://forums.adobe.com/thread/878520?tstart=0
-http://forums.adobe.com/thread/815798
-http://www.shawnlam.ca/2012/premiere-pro-cs6-video-editing-computer-build/
-http://www.videoguys.com/Guide/E/Videoguys+DIY9+Its+Time+for+Sandy+Bridge+E/0xe9b142f408a2 b03ab88144a434e88de7.aspx -
Please help!! I have iPhone 4 so does my wife, we each have our own apple id's for these devices. We have just got an ipad to share for at home use. Is there a way to have both our id's on the ipad to share our music photos etc?
For the purposes of 'refreshing' your question so that others more expert can comment here is a link you should read-
http://apple.stackexchange.com/questions/27070/how-many-apple-ids-should-one-hou sehold-have -
My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.
Be sure you are checking the email account that you used to set up the Apple ID you used to create the iCloud account. Also, be sure to check your spam/junk folder as well as your inbox. The email you should receive looks like the image below. When you get it, click the Verify Now link.
If it still isn't there, try going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right look for a link to resend the verification email. -
Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory
Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments -
Hi all,
I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
Thanks in advance!Most of the documents have sensitive info on them. I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
Thanks for you help. -
after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm
Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden -
Search help for Web Dynpro using the SAP-search help
Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen -
Using f4 help for table field in module-pool
Hi All,
I am using a table-control in module pool programing.
Fields are coming from MAKT table.
I am trrying to provide a functinality so that when choose
a material no using f4 help for MAKT-MATNR field
the corresponding value of MAKT-MAKTX should
appear itself in corresponding table-control field.
It's not happening right now.
How I can create that functionality??
Thanx in advanceHi
Please write the custom F4 Help logic for material number in the block process on value-request. in PAI
process on value-request.
Search Help For UOM
field wa_screen_fields-material module Material_help. -
My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.
Hi there,
Can you please share your Captivate version?(Help>About Adobe Captivate)
Thanks,
Nimmy Sukumaran. -
Tutorials for using javax.help package api's
hi! i m woking on javax.help package for my project nowadays. i will be grateful if someone can guide me that where i can find sample codes and tutorials for using api's in this package.
thanks. bye.tutorials for using javax.help package api's
-
"Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!
== This happened ==
Every time Firefox opened
== Since I downloaded Firefoxsame here my AV is ESET, i already unblock it but no use can't connect to the internet..
-
Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.
Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?
Maybe you are looking for
-
Adobe digital and public library books
I am unable to transfer public library books from the Adobe Digital, to my Nook HD Tablet. I am using version 2.0 for the first time. I used to have an older version, and I did not have any trouble transferring books to my e-reader. Also, my Nook u
-
Russian Characters not in UTF-8 format - File Receiver
Hello, My scenario is Idoc to File. My SAP sender system is a Unicode system and my RFC connection to XI is also set to a unicode connection. My idoc is sent to XI ok and whenever I look at the payload in sxmb_moni, I see the Russian characters ok,
-
I'm on the market for a home security system I can run through my home computers. I was all set to purchase a nice Logitech system with an outdoor camera and everything else, and noticed it doesn't work with Mac. I've done a lot of research, but I'm
-
'Software\JavaSoft\Java Runtime Environment\CurrentVersion' Error
Hi Friends, I've JDK1.5 installed and everything was working fine till I installed JBuilder(i guess which uses JDK1.4).And now when i try to compile my programs from command prompt ,i get the following error.Please help. D:\>java MailExample Registry
-
My email page is too big to see the Apps along the bottom. How do I make the page smaller?
this is recent, I believe.