Iris shapes in lens blur filter

Hi,
In earlier versions of Photoshop the lens blur filter offered the ability to choose the iris shape one wished to apply to bokeh being created.
I can't seem to find that in the new filter gallery.
Anyone know where it is hiding?

Good day!
Could you please post a screenshot with the Layers Panel visible?
Regards,
Pfaffenbichler

Similar Messages

  • CS 5.5 plug-ins - sans Lens Blur Filter

    hello the BASIC Lens Blur filter from AE 5 is NOT showing up in AE 5.5 - and yes its in the correct folder in AE 5.5 but its not a choice in the effects menu
    any solution suggestion?

    Lens blur is not included in 5.5 as a selectable option.
    However, you can add lens blur to a layer in CS5, then open or import the project in CS5.5. The filter will show up and you can copy and paste it to another layer. It's kind of a wonky workaround, but it will work.
    I'd love to see a project where the new filter won't do what the old one did. Blur map is the new Depth Map. If you have an example, even WO footage I'd love to take a look at it.

  • LR/PS - Applying the Lens Blur Filter for Selective Focus | Adobe Evangelists - Julieanne Kost | Adobe TV

    In this episode of The Complete Picture, Julieanne Kost shows us how to get great results with the Lens Blur Filter in Adobe Photoshop CS4.
    http://adobe.ly/x3bXus

    After you make the blur over the full picture, you quickly switch to the gradient panel, but you say it so fast that I don't know what you pressed to get there. It sounds like you say tap the "g" key for gradient. But when I do that, the paint bucket tool appears. Help?

  • Scrubby sliders in the Lens Blur Filter in PS CC 2014 behaving erratically.

    The scrubby sliders in the Lens Blur Filter in PS CC 2014 are behaving erratically. In PS CC no problems. I may be mistaken, but I think I read somewhere that this filter only works on 8bit images.
    In PS CC it works on 16bit, and in PS CC 2014 (no third-party plugins) nothing works. Could this have something to do with the Graphic Card, or Cache Levels? All advice appreciated.

    Sorry, no solution to the problem, but a confirmation. I do have the same problem (Intuos Pro and Pen & Touch) showing the problem with ACR 8.5 and Photoshop (2014, CC and 6, these were updated with ACR 8.5) . No such problem before ACR 8.5 and no problem with LR 5.5 (also containing ACR 8.5).
    I hope there will be a solution from Adobe soon, since sems to be caused by the ACR update.
    Windows 8.1 in my case and latest Wacom Intuos driver installed.
    Thomas

  • Using Camera Lens Blur Filter / Mask

    I have a question concerning the lens blur and I hoping someone can point me to a good tutorial.
    I have several interview segments and I would like to do a small digital zoom at the end of each clip. The background is slightly out of focus already and it doesn't look natural to zoom when the bokeh is not changing.
    I have a good handle on the filter but I am not that experienced with advanced mattes. I need to learn how to get the matte on the person and stay during the zoom so I can manipulate the background. The subjects are seated on a stool so their is very little movement.
    Did some searches but I am probably not searching the right keywords. Can anyone point me in the right direction.
    Thanks.

    Masking? Rotsoscoping? I can think of a million ways to create separated layers or mattes and then duplicate the layer and invert the masks/ matte, but if you never have used that stuff before, you will hard-crash on concrete and not get very far, I'm afraid. It takes at least a bit of practice to produce a clean matte. As a palce to start you may get by suing the Rotobrush and see, if it produces clean enough edges, but if not, it's proably better to scrap the idea before eitehr ending up with a bad result or not meeting your deadline...
    Mylenium

  • Lens blur filter - limit in use?!

    I've got a question about lens blur. What I've done is duplicate my background layer, and used the quick selection tool to do some lens blur in my photo to imitate depth of field. I've done 3 different lens blur selections on this same duplicate layer. I wanted to do a fourth (I'm doing this with different amount of blurs, that's why it's not all one selection), but all of a sudden I can't apply lens blur anymore. Is there a limit for how many selections you can have in one photo? I also tried duplicating the duplicate layer, but it still won't let me add it. HELP PLEASE!!

    Good day!
    Could you please post a screenshot with the Layers Panel visible?
    Regards,
    Pfaffenbichler

  • Lens blur problem (depth layer gives a hard edge)

    I have rendered out an RGB pass and a depth pass from my 3d package and dropped them into AFX using the lens blur filter to create some depth of field
    After juggling with some of the settings I have got the focal distance I want but as you can see from the image I have a hard edge to my RGB layer.
    Its as though the LensBlur effect is only working inside the matte of the layer its been applied to.
    Ive tried precomping the layers and turning alpha channels off to see if that makes difference but no luck.
    Can anyone suggest why the depth pass isnt blurring the edge too?
    Thanks

    Thanks for your input guys.
    I did have the effect applied to the layer so I then precomposed it as suggested which has worked...... (see attachment)
    However I now have a new problem!
    I actually need the the focus to be reversed, with the background sharp and the foreground blurred.
    I tried 'inverting the depth map' in the lens blur settings but it gave me the same problem as before with the hard edges....
    Any ideas on how to get the focus working the other way around?

  • Removing "Lens blur" halos in shallow DOF photo

    I'm working on a portait where I want to give it a more shallow DOF (depth of field) than originally shot. In other words: I want to turn the background blurry while the foreground and subject should be sharp. I decided to use the Lens blur filter (Filter-Blur-Lens blur) for this.
    Basically I just duplicated the image to a new layer, turned that layer into a smart object, added lens blur to it, then used a gradient filter on the mask in order to make the blur fade away in the front (just like a camera lens wide open would). Finally I used a brush to carefully remove (mask) the blur from the subject, revealing the (unblurred original image) bottom layer.
    The problem is that the blurred layer also introduces a "halo" around things which isn't very attractive (see screenshots below). Is there a way to make the background blurry without adding halos? I've tried Gaussian blur as well but the same problem was there. I'm using Photoshop CS4 on a Mac.
    Original image
    Duplicated layer blurred (lens blur) -notice dark "halo" above hair
    Masked to reveal sharp (original) layer for subject. The halo is of course still there. Not very flattering

    Mask it ahead of time, using Refine Edge to make a new masked layer showing just the portion of the image you want in the foreground.
    Then use the mask to select the subject in the background, expand the selection some, then use Content Aware Fill to remove the subject from the background.
    THEN blur the entire background.  The results can end up surprisingly believable.
    Refine Edge makes it possible to do quite complex subjects...
    -Noel

  • Lens Blur Speed

    I have recently upgraded both my computer (from a 2005 G5 to a 2010 Quadcore Mac Pro) and my Photoshop (CS4 to CS5). I've extensively optimized my new Mac Pro to work best with CS5 and in general I'm seeing excellent improvements all around. CS5 is about 5x faster with the new system. The selection and masking tools are an absolutle joy to use as they are not only faster, but are producing profoundly better results.
    However, the Lens Blur filter is running at just about the same speed as before. Using the same image and the same mask to drive the blur, I'm getting a time of just under 5 minutes on both machines. You would think even at the most redumentary level, the faster CPU speed would confer some sort of benefit on the new system.
    Worse still, whatever is happening with the Lens Blur process on the new system is stalling most other tasks on the machine, preventing me checking e-mail or accessing other programs during the Blur. This was not true on the G5 with CS4. Activity Monitor shows CS5 only using one of four cores (though the task gets broken up into chunks in a seemingly random pattern)
    My theory is that this task was able to use both 2.3GHz CPU's in the G5, or at least could leave one free, but it is only able to use one Core, but is somehow tying up the entire processor ont he new 2.8GHz Quadcore.
    Old system:
    2005 G5 dual 2.3GHz
    4GB RAM
    OSX 10.4.11
    CS4
    New system
    2010 2.8GHz Quadcore Mac Pro
    12GB RAM
    OSX 10.6.4
    CS5

    Thanks for your response. I am using a 1024K tile size and a RAID0 scratch disk. (My understanding was that SSD is not appropriate for scratch.) My previous system does not have the benefit of any optimized disks - in fact, that computer's disk are nearly full, which should slow the performance on the older machine and at least give the illusion of better perfomance on the new one.
    Is the scratch disk an issue here if RAM is not full? (I would be surprised if all 12GB were filled by this operation.)
    As I said, the general performance has been good, but the Lens Blur filter, even at one core, seems to be awfully slow.

  • How can i view the ellipse and the points on the ellipse in order to modify the settings when i'm using the iris blur filter on Photoshop CC 2014

    I can't use this blur filter (diaphragm) because i see nothing that could allow me to increase, decrease or move the ellipse that normally appear(?) on the screen. What's amazing is that this filter does his job on photoshop CS6, but not on Photoshop CC 2014 ?! Thanks in advance for your help.  Serge.

    Start from the beginning
    - Select the Rectangle Tool - go to Options Bar, ensure 'Shape' options is on from the the Pick a Tool Mode drop down list.
    - Draw Rect. This should create a vector Shape Layer.
    - Select it in the Layers Panel: The Properties Panel then should highlight the Density and Feather options.
    What happens here when you drag the Feather slider? On my end it feathers the vector shape as a whole.
    If you need further masking capabilities, then apply a Layer Mask to the Shape and proceed with the Properties Panel Density/Feather options.
    h

  • Cs6 camera lens blur not using curve ajustment on blur map

    So I am doing some camera lens blur to create the 'tiny town' effect. I have completed following this tutorial: http://www.youtube.com/watch?v=oleQ9O3kaPk
    But the camera lens blur doesn't seem to be taking into account any curve ajustments I make.
    It is creating the blur effect as if the curve is not activated (even though it is and I can visibly see my ajustments to the gradient on the shape layer).
    Anyone know what the problem is?

    It works as it should. Effects referencing otehr layers use the layer source, not the effects result. You need to pre-compose the adjusted depth map.
    Mylenium

  • Slow Lens Blur Discovery

    Hi people, this may or may not be of importance to you:
    I had been using photoshop CS2 on PC for years but now I'm working on a Mac mini with CS4. I have used lens blur in previous work and found it to be really helpful, but I tried blurring the background of a measly 40 MB picture and photoshop basically stoppped trying to render it (I gave up after about 10 minutes of waiting). - What was wrong?
    This made no sense, as up to now the mini has been pretty powerful. I spent an entire night trying to sort out scratch disks and monitor performance, and finally, I thought I would try something from the filter gallery to see if it was equally affected, or there was a bug.
    The filter gallery was greyed out - because I was in CMYK! - I work in print, and the file I was testing was CMYK and I had not noticed it. So I was trying to lens blur a CMYK image! I'm sure previously you could not pass a lens blur over a CMYK image? Anyway, I changed it back to RGB, and (rather obviously) the render was done in no time at all.
    Just a little heads up - check your colour mode before blurring! :-)

    Hi Kwill,
    Could you try resetting the preferences as mentioned in this post - http://forums.adobe.com/message/5984761?

  • PSE 12 Lens Blur

    I tried to the lens blur in PSE12 with the method of selection (exactly like the tutorial) but it doesn't blur the the mask at all........very very little?

    New Blur effects in Photoshop Elements 11.
    Are these images available where I can try on the very same photo?
    And yes I can post it.
    nealeh wrote:
    Which tutorial? Did you pick a similar photo to that used in the tutorial? If not you may need different settings. Feel free to post your photo here if you want specific advice on using the filter with it.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.
    nealeh wrote:
    Which tutorial? Did you pick a similar photo to that used in the tutorial? If not you may need different settings. Feel free to post your photo here if you want specific advice on using the filter with it.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Lens blur not working

    I've used lens blur in the past with no problems.
    Now I'm applying blur to an image and when I press the OKAY button the filter processes but the image returns to its original condition.
    Confused Keith

    Hi Kwill,
    Could you try resetting the preferences as mentioned in this post - http://forums.adobe.com/message/5984761?

  • Blur filter + mask

    I think a couple people asked about this problem but none of them seemed to get an answer so I am re-posting.
    This is how blur filter and mask work in code
    var blur:BlurFilter = new BlurFilter();
    blur.blurX = 10;
    blur.blurY = 10;
    var mask:Bitmap = new Bitmap(...)
    var shape:Shape = new Shape();
    shape.graphics.beginFill(color, alpha);
    shape.graphics.moveTo(100, 100);
    shape.graphics.lineTo(...);
    shape.graphics.endFill();
    shape.filters = [blur]
    shape.mask = mask;
    bitmap.bitmapData.draw(shape);
    But result is not what I want. Please see the below image:
    Making another bitmap and copy pixels using the mask works but it makes whole applcation very slow.
    How can I mask blur filter using a single draw?

    The difference between the code I posted and what you have there is that you are applying the mask and the blur to the shape, whereas I applied the blur to the shape and the mask to a container the shape is inside. This is because for a given object the filters apply AFTER any masking, but you want the reverse. The only way to control the order that I know if is to create more layers.
    In other words, change the last code you posted like this:
    1. Create a container for the shape:
    var container:Sprite = new Sprite();
    2. Add the shape to the container:
    container.addChild(shape);
    3. Apply the blur to the shape, and the mask to the container:
    shape.filters = [blur];
    container.mask = block;
    3. Draw the container to the bitmap:
    bitmap.bitmapData.draw(container);
    That should produce the image you want.
    -Aaron

Maybe you are looking for