IRQ conflict on Dell Inspiron 5100 with DAQCard 6024E

Hi,
I have DELL INSPIRON 5100 and I am trying to make working my DAQCard 6024E , but it gives me following error on MAX Device Test Panel: The Device is not responding to the First Level IRQ. Would you like to continue anyway? Please see attached file for IRQ allocation on my Laptop.
What kind of drivers you requested from DELL? Can you please share those drivers so I can try out for my laptop.
Thanks,
Kishor Senjaliya"
Attachments:
IRQ.doc ‏85 KB

Wow, it looks like you have quite a bit of stuff on IRQ 10. My guess would be that another device is using that IRQ and not letting the 6024E use IRQ 10. Fortunately, it looks like you should have plenty of other resources available, so I would try to configure your card on another IRQ. Hopefully you can go to the properties on that card in the device manager and try to manualy set the IRQ to one that isn't being used. Good luck.
Steve.

Similar Messages

Can't connect to wireless network with Dell Inspiron 1525 with Vista

I set up a wireless network about a week ago, and have made it with the following security features: WEP, enable only certain MAC addresses to connect, and disabled broadcasting the SSID. I have been able to use it just fine with my Mac computer using airport, but when I have tried to connect my roommates computer, a dell inspiron 1525 with vista, it can't connect. I can locate the network but when I try to connect to the network, I get a message saying that for an Windows cannot connect to the network and that the Wireless association failed due to unknown reasons. It then says to connect with your administrator, but that is me. I have a minimal knowledge of computers just enough to be dangerous and am basically figuring this out as I go along. If anyone has some advice for me, both my roommate and I will be very grateful.
Thanks,
- Jill
Solved!
Go to Solution.

Sorry I am not sure if this is needed but I am using a WRT54G router ver.6.

Cannot install sofware for HP Office jet 8625 Pro on my Dell Inspiron 15 with windows vista?

Cannot
install
software for HP Office jet 8625 Pro software on my Dell Inspiron Core 2 processor with Windows Vista?

Hi @akcarl
What happens when you try to install? Does it freeze, do you get an error message, or perhaps you simply can not find the appropriate software to download?
Please post back with some additional detail so I can better assist you. Thanks.
In the meantime, if the issue is nothing but finding the software, you may use the following link; OJ8620_198.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Installing Windows 8.1 on a Dell Inspiron 3451 with SSD (Crucial BX100 256GB)

Hey,
I have a problem with the clean installation of Windows 8.1 on a Dell Inspiron 3451 laptop with SSD (256GB Crucial BX100).
The problem is that the installer does not see the disk, prompts you to install the driver. Secure boot disabled.
The disk is recognized in the BIOS. I can also change AHCI to IDE mode, because the BIOS does not have this option.
How do I solve this problem?

This is usually because the Windows installation does not come with a suitable driver for your disk interface. The disk interface concerned is often SATA. Go to your motherboard/laptop manufacturer's web site and download the appropriate driver. Place it on a floppy disk, USB stick or CD (uncompressed, if it is provided as a ZIP file or an EXE installer originally). Then, when the Windows install routine asks for it, you can provide it. Please note that switching to IDE mode is for testing purposes only and is not a way you want to run things. Neither do you want to choose RAID, as if you know enough to be messing with RAID you don't need my advice. You want to choose AHCI and you want SATA drivers on hand before starting to install Windows.

Dell Inspiron 8100 with W2K installed

Dear all:
I've just bought a new Dell Inspiron 8100 notebook with W2k installed. I configure the HD in a way that there is 6G space left unallocated and unformatted. Initially I plan to install solaris on that space. However when I search in this board I found many issues about Solaris install, not to mention for those notebooks.
Well, I'm still in hope, has anyone ever successfully installed Solaris 8.0 on same platform? Or can suggest me a backup plan before I give it a try. Anyway, I won't like to waste $45 once I buy one.
thanks,
-Jun

One workaround I have seen for laptop keyboards not funtioning correctly during install it to connect a USB keyboard to the system. I cannot guarantee it will work on this particular system, but its worth a try.
ct

I have photoshop CS 4 extended. Just recently got a new Canon 70D and a new Dell Inspiron 17 with windows 7. When I download my pictures from my new camera they will not come up in raw. Contacted Canon. They gave me something to try but it did not wor

I have photoshop CS 4 extended. Just recently I purchased a Canon 70D as well as a Dell 17 Inspiron with windows 7. When I download my pictures from my camera to the computer, they will not open up in raw, only jpeg. I contacted Canon, and they told my to try something but it did not work. How do I get my raw pictures to open up in CS 4 on my new computer from my new Canon 70D?

You will never be able to open your raw files from your new camera in CS4.
You need version 8.7.1 of the Camera Raw plug-in (ACR), which only runs in CS6 and higher.
You need to locate, download, install and run the free, stand-alone application Adobe DNG Converter on each batch of raw files from that camera, in order to convert them to raw DNG files that can be subsequently opened by ACR in CS4.
Remember you need to launch and run the DNG Converter on each folder (not files) containing your Canon raw files. THe DNG Converter doesn't do it magically for you just sitting on your HD.
Or you can upgrade.

Suspend with Dell Inspiron 1720 and Nvidia closed source drivers

Hey all! I'm really liking arch linux. That being said, it would be nice if I could get suspend to ram (or disk) working on my laptop (dell Inspiron 1720 with Nvidia geforce 8800m) .
I followed the directions on the wiki for pm-ultils. When I try pm-suspend, my devices like mice and external HD's shut off, but all I get is a black screen with a blinking undercursor - the system does not appear to really suspend. Nothing will bring the system back, and I have to hard reboot.
I tried insatlling uswsusp and followed the directions for that, but get the same result. Here is my /var/log/pm-suspend.log:
Initial commandline parameters:
Wed Mar 11 15:17:58 PDT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-vbe-post
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux FancyHotel 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz GenuineIntel GNU/Linux
Module Size Used by
nls_cp437 7424 0
vfat 12800 0
fat 50592 1 vfat
ipv6 260340 12
fuse 53020 2
ext2 66184 1
btusb 13464 0
bluetooth 54372 1 btusb
usblp 13952 0
hid_logitech 11392 0
ff_memless 6792 1 hid_logitech
usbhid 36640 1 hid_logitech
hid 40704 2 hid_logitech,usbhid
uvcvideo 57736 0
compat_ioctl32 3072 1 uvcvideo
ext3 127112 1
videodev 34176 1 uvcvideo
v4l1_compat 15364 2 uvcvideo,videodev
jbd 46996 1 ext3
joydev 11712 0
mmc_block 11012 1
usb_storage 95552 1
snd_seq_oss 31872 0
snd_seq_midi_event 8192 1 snd_seq_oss
snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8204 2 snd_seq_oss,snd_seq
snd_pcm_oss 40192 0
snd_mixer_oss 16512 1 snd_pcm_oss
sdhci_pci 9088 0
sdhci 17028 1 sdhci_pci
arc4 3712 2
ecb 4608 2
ohci1394 31280 0
mmc_core 46876 2 mmc_block,sdhci
psmouse 55828 0
uhci_hcd 24592 0
b44 28560 0
ssb 40964 1 b44
pcmcia 35532 1 ssb
pcmcia_core 34452 2 ssb,pcmcia
mii 6528 1 b44
iwl3945 91128 0
rfkill 11596 2 iwl3945
mac80211 161184 1 iwl3945
led_class 5508 1 iwl3945
nvidia 7227388 0
snd_hda_intel 412980 0
snd_pcm 70020 2 snd_pcm_oss,snd_hda_intel
snd_timer 21384 2 snd_seq,snd_pcm
snd_page_alloc 10120 2 snd_hda_intel,snd_pcm
snd_hwdep 9092 1 snd_hda_intel
snd 50852 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
serio_raw 7172 0
ehci_hcd 36876 0
ricoh_mmc 5632 0
ieee1394 79940 1 ohci1394
wmi 7848 0
video 18704 0
output 4608 1 video
cfg80211 31760 2 iwl3945,mac80211
soundcore 8160 1 snd
sg 26804 0
usbcore 136848 8 btusb,usblp,usbhid,uvcvideo,usb_storage,uhci_hcd,ehci_hcd
intel_agp 27836 0
agpgart 31572 2 nvidia,intel_agp
ide_cd_mod 38152 0
cdrom 35360 1 ide_cd_mod
i2c_i801 10896 0
i2c_core 22804 2 nvidia,i2c_i801
iTCO_wdt 12836 0
iTCO_vendor_support 4996 1 iTCO_wdt
dcdbas 9120 0
evdev 11296 9
thermal 17180 0
fan 6276 0
button 7824 0
battery 12036 0
ac 6020 0
cpufreq_powersave 3456 0
cpufreq_ondemand 8972 2
acpi_cpufreq 9868 0
freq_table 5632 2 cpufreq_ondemand,acpi_cpufreq
processor 41388 4 thermal,acpi_cpufreq
rtc_cmos 12332 0
rtc_core 17564 1 rtc_cmos
rtc_lib 4480 1 rtc_core
ext4 218268 2
mbcache 8708 3 ext2,ext3,ext4
jbd2 55192 1 ext4
crc16 3712 1 ext4
sd_mod 26904 7
ahci 30988 4
libata 157856 1 ahci
scsi_mod 102164 4 usb_storage,sg,sd_mod,libata
piix 8200 0
ide_core 103112 2 ide_cd_mod,piix
total used free shared buffers cached
Mem: 2073576 984996 1088580 0 141968 741552
-/+ buffers/cache: 101476 1972100
Swap: 1052248 0 1052248
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/etc/pm/sleep.d/50-hdparm_pm suspend suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/55wicd suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90chvt suspend suspend: success.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Wed Mar 11 15:17:59 PDT 2009: performing suspend
I have not put anything my /etc/pm/config.d/ because the wiki was pretty vague and Im not sure what to do there.
I tried using uswsusp s2ram but that does not work. I added uresume to my /etc/mkinitcpio.conf and rebuilt the image to no avail.
s2ram -n shows this:
Machine matched entry 99:
sys_vendor = 'Dell Inc.'
sys_product = 'Inspiron 1720 *'
sys_version = ''
bios_version = ''
Fixes: 0x0
This machine can be identified by:
sys_vendor = "Dell Inc."
sys_product = "Inspiron 1720 "
sys_version = ""
bios_version = "A08"
See http://suspend.sf.net/s2ram-support.html for details.
If you report a problem, please include the complete output above.
which looks to me like I am whitelisted. Am I missing something here? Should I be using one of the DM's power managers? It would be cool just to be able to suspend with a command but if I have to use something else no problem as long as it works.
Running out of ideas, hope you guys can help. Plus the hard rebooting is wrecking my drive, I can see the non-contiguous percent rise each time.
Thanks.

I know this is an old thread and i shouldn't be posting but i have been looking EVERYWHERE for anybody that has successfully installed an 8800M inside of an inspiron 1720... i was just wondering how you went about it???
Thanks.

Dell Inspiron 1525 Problems

Hello.
I just purchased a Dell Inspiron 1525 with Vista Home Premium preinstalled. I wanted to know if there is a way to install a fully working Arch Linux system on it. I tried with 2007.08 CD only to fail at getting the wireless card to work. Dell Inspiron 1525 comes with a Dell Wireless 1390 WLAN Mini Card. I tried installing both the latest vista and xp drivers for this card via ndiswrapper. I thought all was well since I got the message that said that the driver is installed and the device was present. However, when I checked iwconfig, the normal 'wlan0' was not in the list, just 'lo'. Can someone help me with this?
Also, I used a ZenWalk liveCD to test out if I have sound support. It seems like the sound doesn't work either, but that may be because I used an old liveCD. The 1525 comes with a 'SIGMATEL STAC 92XX C-MAJOR HD Audio' or also known as "High Definition Audio 2.0".
I have also learned that although Dell does offer this laptop with Ubuntu installed, they changed the wireless card on the ubuntu version. I don't know if that means anything. Also, I have heard of many who have gotten linux installed on this laptop. I have some experience with linux, but all of that is with a desktop pc. (Used Arch for the longest after trying out Gentoo ^^)
I checked the Ubuntu forums on this matter, and they seem to have a lot of documentation on it, but I am unsure if it will apply to Arch. Does Arch come with the bcm43xx drivers? If it does, then that means I have to blacklist it or something. I really need help.
- Dennis ^^
PS: Thanks in advance for any help!

Thanks for all of the replies. I downloaded the newest ISO and tried to get it working again. Well, b43 did not really work as I hoped it would, so I went and used ndiswrapper. To my astonishment, it works. Apparantly, something changed from the 2.6.22 to 2.6.24 kernels that made it so that the ndiswrapper module won't be detected with a broadcom card with the 2.6.22 kernel. This is all a guess, but it kinda makes sense. Only one problem though, I did all of the usual steps to set up the wireless connection... and it can't seem to connect to the internet... I did:
iwconfig wlan0 essid ********
iwconfig wlan0 mode Managed
iwconfig wlan0 key restricted **********
ifconfig wlan0 up
dhcpcd wlan0
*I have tried this with other network cards, those on my desktop, and they worked fine.
When I do 'iwlist wlan0 scanning' , I detect all the networks that I expected to see, but it doesn't connect to any of them, which I think is really weird.
I don't really care much for vista, but I miss messing around with a decent CLI, and I will be majoring in Computer Science once I get into college, which would definately include classes on Bash scripting, so I wanted to get a linux install on my laptop since my desktop died. I have experience with Ubuntu, Gentoo (Stage 1 and Stage 3 installs.. Stage 1 was a giant pain and failed the first 4 times), ZenWalk, MEPIS, SuSE, Fedora, Arch, and some others. Of all of these, I liked Arch the best. So, I was really hoping I could get it installed.
Well, it seems I will be stuck with vista for a while... but I must say, it's not AS bad as I thought it would... still slow and all though ^^
@anti-neutrino:
Hello. Dual-booting is tricky stuff in my opinion. I have never done it myself, so I can't really help you there. But, there are plenty of documentation out there on it. According to http://www.goodells.net/dellrestore/mediadirect.htm, DellMediaDirect is installed on a hidden partition. So, I'm guessing that as long as you don't touch that partition, it would still be there. What I think you would have problem with is where to put grub (or lilo). The safest thing to do, I would think, is to place it in a floppy, if you have an external floppy drive, or place grub into a USB Flash drive which you would be able to boot from. I have no idea how to do this in Arch, but I have done it before in SuSE. And as for Vista, as long as you don't touch the vista partition, it should stay the same. The booting is the only problem I can see for you. If the boot loader (grub or lilo) is installed in a separate medium (floppy/USB) then to boot into the linux partition, all you would have to do is boot from the medium, eitherwise, it would boot into Vista (or whatever you have that boots up first) automatically.. that is unless they changed something, and knowing how fast linux is developed, there are a lot of changes, so I'm not really sure if it still works this way.
@Warper:
I don't really mind the sound right now. If I can get internet to work, I know I can solve all the other problems later, as all I need to do is look up how to solve for it. But, yeah I know sound is muted by default in Arch. It's just that with my desktop, sound was automatically detected by other LiveCD's that I was confused when those same LiveCD's couldn't detect it. Again, this might just be that the LiveCD's use an older kernel.
- Dennis ^^
PS: I reinstalled vista and wrote this post in it. T_T
Last edited by skittlehawk (2008-06-06 23:30:16)

Duplicate instances of Itunes after install on my Dell Inspiron N7010

I attempted to download and install the latest ITunes 64 bit on my Dell Inspiron N7010 with Windows 7. The download is fine, but once installed, ITunes appears to write over my existing applications on my desktop, replaces the applications with the ITunes icon and if you click on each my ITunes library will display. Example, I had Adobe Acrobat on my desktop, once Itunes was downloaded and installed, the adobe icon is replaced with the Itunes icon and if you click on it, my Itunes library displays. I have a desktop folder with documents and images that was not written over. I have a shortcut to Roxio that was not written over. Microsoft Office was not written over. I downloaded and installed ITunes (not 64 bit) on another Dell Inspiron 1520 laptop (an older laptop with Windows Vista) with success. I checked settings on both and they appear to be identical. I also have a menu across the top of my desktop that is docked with a explorer icon and other accessories that was not affected by the install. Can someone help me with this? I have installed and uninstalled Itunes about 10 times, checking settings and each time I get the same problem. Thanks.

moved to correct topic.

DELL Inspiron 17

I need a DELL Inspiron 17 with Windows XP. Any suggestions?

Microsoft no longer produces Windows XP product keys/ What you find out there is what's left. With that said, I see a lot of people "salvaging" oem Windows XP product keys from recycled and unused computers, which could then be installed on a different computer. Windows 7 Professional is capable of running XP Mode. As NoNoBadDog stated, you're going to be quite hard-pressed to find working drivers for the Inspiron 17 even if you managed to install a working copy of Windows XP. Most of the time, Windows Vista drivers will work for current hardware since Windows 7 and Windows Vista are the same kernel, but any earlier than that then it will be quite a challenge. The Inspiron series is designed to be the budget series so Dell won't be bothering too much with including hardware in there that would be backwards compatible with multiple Windows versions. The Optiplex and Vostro series were designed to be mass produced and licensed to schools and businesses. Also, as Starflyer59 mentioned, I can certainly why a lot of businesses are reluctant to upgrade to current operating systems. My best friend's dad owns an engineering shop and all of their systems run off of an old HP desktop with Windows XP on it. Recently, he put out an inquiry on how much it would be to upgrade his computers and redesign all the software to be compatible with Windows 7 and it came out to almost $30k. For a small business that only pulls $200k-$250k (revenue, not profits) per year, he didn't think it was a good investment at the time.
I DO NOT work for Best Buy. Whatever I post are just educated guesses or common sense.

Problems hooking up Inspiron 6000 with Router WRT54GS

We have a WRT54GS that has been set up and working wonderfully. My son just came home from college with his laptop (Dell Inspiron 6000 with wireless card, etc) and I wanted to hook it up also.
I think I'm missing a setting somewhere because, although I've entered the MAC into the router MAC filter list and the laptop shows our network name, I cannot get the laptop to connect. I get the prompt for our password, enter it, and then it just can't connect. Any suggestions as to what I've done wrong or what should I be checking? I've spent far too much time on this today.

It sounds like you have a wired computer connected to the router and that this computer is able to access the Internet without any problems. Is this correct? If so, then your basic router setup is complete. But it also sounds like you have never connected a computer wirelessly to this router. Is this correct? Normally, wireless would be turned on by default. So the only settings that you normally need to change are the wireless security settings.
You mentioned that you were using MAC address filtering. On the same page where you "Enable" wireless MAC address filtering, make sure you have marked the option "Permit only PC's listed .....". Then enter the MAC address of your son's laptop in the "MAC Address Filter List". Be sure to click on "Save Settings" on both of these pages, and wait for the page to refresh (3 to 60 seconds).
Have you checked to see if your son has the Intel Pro Wireless 2200bg card? You can check this in "Device Manager", under the heading of "Network Adapters".

Brand new Dell Inspiron won't burn CD's in iTunes

Just bought Dell Inspiron 1501 with a TSSTDVD+RW TS-L632H DVD-CD combo burner, running Windows XP Home. When I insert a blank CD-R, iTunes says it is initializing the burn, then ejects the CD and asks for a blank CD. I burned a CD in Windows Media Player with no difficulty, so it's not hardware. Is iTunes just incompatible with Samsung burners or what? I've tried the Samsung site, they don't even list the "H" model, just D and L. Please, anyone with info pleas respond. Thanks,

I don't think it's your DVD+/-RW drive--I have the same model on my Dell Precision M65 Vista laptop. (And I can burn CDs & DVDs with no problem using iTunes 7.3.1.) My computer is a few months old and I did have to download a firmware update for the drive. You could check the Dell downloads site to see if there is a firmware update for your computer running Windows XP.
Others who can't get CDs to burn using iTunes ver. 7.3.1 have downgraded to ver. 7.2--apparently this version works for some reason. Here's a post about this if you're interested:
http://discussions.apple.com/thread.jspa?threadID=1017546&tstart=0

Dell inspiron N5110 win 7 32 bit wifi driver

Hello,
I can only find 64 bit driver for this model. Can anyone help me with this?
Thank you.

Dell Inspiron comes with 4GB and 8GB ram modules, and only 64 bit OS supports 4, or more gigs of RAM. You NEED to have 64 Bit OS in order to use all of the Ram, as 32 Bit only supports 3 GB or less. The Driver you require is this one. : www.dell.com/.../DriverFileFormats

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

IRQ conflict on Dell Inspiron 5100 with DAQCard 6024E

Similar Messages

Maybe you are looking for