IRQ LESS ... when use usb mouse

I've recently bought a MSI K8T Neo FISR with AMD64 2800+.
I have got 2x256 Kingston RAM
BIOS 1.7
450 Watt ANTEC Power supply
160 SATA Maxtor HD
NVIDIA GFORCE 4 MX400
My RAM is OK (memtest86).
All my drivers are update.
My problem is that when I move my usb mouse (Logitech) Windows XP SP1 give me a fatal blue screen with message IRQ LESS OR...
The error seem to be in file usb....sys.
Could I burn this mothermoard ?

I had the same error message. It is often said that it could be a memory problem. I think in my case it was not. I got the error message when something appears on the screen. For example I have a hot key for the sound volume with a small pop up window. As soon as the window appeared I got the error. After disableing the "fast writes" feature of my video card  (ATI) the error is very seldom now.

Similar Messages

  • K3011w - How disable the touchpad when using USB mouse?

    Is there a way to disable the touchpad on the docking keybd when using a USB mouse? It is a real pain typing along and be in the middle of sentence some where else on the page.

    hi whippetguy,
    Thanks for Posting,
       The touchpad on the dock uses a Windows driver and does not have any special Software to Disable it via shortcut,
    How I found to go around on what you need is
      With the tablet on the dock with no USB mouse yet
                      Press (Windows key+x) and choose device manager on the list
                            On Device Manager window open mice and pointing device and rightclick disable
    This should disable the dock touchpad and Now you can plu in your USB mouse,
    Before you unplu your USB mouse after use, Go to device manager again and Enable the device you disabled.
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Format and Partition Task Sequence Not Working As Exprected When Using USB Media

    Task looks like this. 
    Had been working on PXE based task sequence, but when I use USB media, it only makes a single partition that is around the size of the USB thumb drive.
    How does this need to be changed so that it makes a C drive partition that is 80% of the total local disk space and a D drive that uses the remaining disk space when using USB boot media?

    If you choose to create a "custom" partition configuration like the one above, then you are responsible for creating any extra required partitions like a BitLocker boot partition.
    Additionally, if you are deploying on a uEFI machine, then you will also need to create the correct uEFI partitions.
    Generally I discourage creating extra partitions.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • My touchpad is not working anymore after using usb mouse for a while

    I have been using usb mouse for a couple days now I only can use usb mouse because my touchpad is not working. its like it is disabled or something.
    I have asus k55v (windows 8.1)
    pleasseeee help !!!!

    Check the settings:
    Press FN+F9 or hotkey to turn on touchpad.
    If the problem persists then enter the BIOS and make sure BIOS is set to default.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Does Mackie Control work with Final Cut 7 when using USB MIDI?

    I have a Mackie Control Universal Pro connected via USB to my mac and it works GREAT with Logic and all the complimentary Logic Studio software.
    The problem I am having is, when I try to use it with Final Cut, it wont work at all. I have read the post concerning this that was answered by Andy Mees but, I dont use a true MIDI connection, only USB.
    Any thoughts?

    Does Mackie Control work with Final Cut 7 when using USB MIDI?
    No one will know until FCP 7 is released.
    -DH

  • Wake from sleep when docked to Mini Dock using USB mouse or keyboard attached to dock

    I'd like to know how to wake a T520 connected to Mini Dock (type 4338). I have a basic USB mouse (wired) connected directly to the dock.  I've verified all of the items in Device Manager (mice and USB ports) are enabled for "waking the computer".
    In the article below, Lenovo says it's not possible to wake it by connecting directly to the dock....they say it's "not a limitation of the dock"... but "by design". Of, course that's the line all companies say now a days. But it CLEARLY IS A LIMITATION.  They say the only way is using the power button on the dock.  What a waste.
    Lenovo article:
    http://support.lenovo.com/en_US/diagnose-and-fix/d​etail.page?DocID=HT077684

    the

  • Port Replicator III+ very high cpu when moving usb mouse only in W2k

    Tecra M2 with a port replicator III+
    It's set to dual boot into XP and Win2000 (yes I know it's getting on a bit, but I've got a lot of stuff installed in win2k that is difficult to get hold of these days).
    XP is 100% fine, but with win 2000 if I use my *USB mouse* on the *port replicator* ports and waggle the mouse around - the *CPU* jumps from 0 to *70+%* usage (the system process which I think indicatates as IRQ problem). If I plug the mouse into the laptop ports (when the laptop is docked) - it's fine, at most 5% cpu usage. It's a basic microsoft mouse. I definately think it's a usb problem of some kind, because the cpu even jumps a bit if I type quickly on my usb keyboard (only a couple of %). It happens with all the replicator's usb ports.
    Any ideas? I don't really want to plug in my mouse in the morning because it kinda defeats the point of having a docking station in the first place! I've got the mobile extensions installed. All the other aspects of the replicator are fine
    Martin

    Huh it will not be easy to find good explanation for this.
    At this time when Tecra M2 was offered on the market as compatible port replicator Toshiba has offered Toshiba Advanced Port Replicator III (not +) and at this time both supported operating system was tested with it.
    Later Toshiba has designed Toshiba Advanced Port Replicator III+ and confirmed compatibility with Tecra M2 but obviously with newer (at this time) WXP.
    So now you have follow situation: you use newer port replicator but with much older operating system so I presume there is maybe some compatibility problem with W2K.
    I cannot imagine you use it so often with W2K and if yes it cannot be so problematic to connect mouse directly on notebooks USB port.
    Sorry but I dont think there is anything you can do about it.

  • Can I use USB mouse with bluetooth keyboard?

    I am in need of some help. I recently got my iMac about 3 months ago and absolutely hate the magic mouse and want to use my rocketfish usb mouse along with the bluetooth mac keyboard. Is this possible or just wishful thinking on my end? I have searched everywhere for drivers and answers with programs etcetera and have came out empty. Help?

    I've done so (and even tested it on my Macbook and the USB mouse works fine) but for some reason it will not interface with my iMac - and I've tired multiple USB ports and still nothing, which is why I brought up the keyboard being bluetooth I didn't know if that somehow may interfer with the USB mouse when the bluetooth keyboard is turned on and paired. I am pretty good when it comes to computers so I know what to look for and what I am doing (for the most part) but this has me stumped.

  • Having touchpad auto disable when external usb mouse is present

    Apparently as hardware and drivers change this feature got dropped. Just purchased a Probook 450 and was very used to my touchpad having the option to turn off when a external usb mouse (logitech wireless) was plugged in. This new system had no such feature and I spent several hours searching for a solution of reason why.
    Finally found one I took a shot on that worked just like I was used too.  Now when usb mouse is inserted the pc pops up message saying touchpad disabled and when unplugged the touchpad comes back on and pc pops up message saying pad enabled. No software change. No hardware change. Just a simple registry edit and feature back on.
    Seems after doing my searches I might as well share this info for those looking for the answer.
    ***disclaimers***
    *make sure your usb mouse works before you do this because if it dose not and this fails to work or you do it wrong you may have no "mouse" to navigate with.
    *warning- editing the windows registry is not something for the clueless*- errors can cause major problems that said this is a very simple simple fix and hp should just perma fix it for all synaptics touchpad laptops.
    *can not test this with non synaptics touchpads tho it may work if you can find the registry entry for that brand*
    *this was done on windows 7 system with Synaptics touch pad and my prior one was windows 7 and so was my wifes dell laptop, all Synaptics, all Windows 7- no clue on windows 8 or vista*
    *if someone has found an easier fix post it because took me hours to even find this*
    Windows 7 OS- Start menu- in the programs and files box at bottom type  "regedit" without the quotes and press enter.
    Click ok to continue on popup box. Window comes up with your system registry. Expand the "HKEY_CURRENT_USER" then expand the "Software" then down to the "Synaptics" and expand that one. Left Click on the "SynTPEnh" and to right will  open the sub entries.  The one your looking for is "DisableIntPDFeature".  Just write down the last two numbers in the (   ) at far right of this line incase this does not work so you can put it back to what it was.  Once you wrote it down, now you can change it- right click on the DisableIntPDFeature and a window pops up.  Left click on "Modify..."  then in new popup window on right side left click on decimal and in the window on left of this popup type in the numbers 51.  Left click OK once numbers entered and close it and and then close the whole application and reboot.  Done.  System should auto switch from usb mouse to Synaptics touchpad.
    If it does not work I am sorry- follow the above steps and type back in the number you wrote down before the change and save and reboot or reinstall the mousepad driver for your system from hp.

    Hi Trukntigger,
    Thank you for visiting the HP Support Forums and Welcome. Thank you for sharing your findings we appreciate you taking the time to post.
    Have a great week.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How to solve power error when using USB camera adapter in your camera

    Hello Everyone,
    First of all I wanna say reducing the output of the USB camera adapter from 100mA to 20mA just to save battery life is by far the most incredible adjustment in the history of @)#*$#%*($#!
    I know most of us bought the USB Camera adapter so we can use it as a USB adapter for the Camera (saves us from taking the memory card on and off the camera) but sadly the "Ginues Apple" reduced it to 20mA which decreases the range of cameras and flash drives that will work with it. I use Gopro Hero 3+ black and everytime I plug it with the adapter to my ipad I keep on seeing this @#@$#@ power error. I didn't want to waste the expensive adapter so I tried to look for a micro sd card reader but I don't think 20mA readers still exist.
    Now to solve this problem is very simple add a power source to help that 20mA up, most of the my friends bought a powered port hub but it's not my type because it's bulky, needs an outlet and not portable.
    So I found a better solution on how you can add a power source and still be portable, the answer is power bank or portable charger.
    Things you need:
    Camera
    USB camera adapter (Ginues Apple product)
    Power bank (I'm using 8,400 mAh)
    Dual USB Male to 5 Pin Mini USB Y Cable
    Ipad
    Procedure:
    Camera --- 5 Pin Mini USB ------------------ USB camera adapter ---------- Ipad
                                                   '---------- Power Bank
    Attach you camera to the 5 pin mini usb then the USB1 male to the female apple's USB camera adapter then to the Ipad. = this will show the power error.
    Then attach the USB2 to the power bank/portable charger to power it up.
    your welcome

    yocto yotta wrote: How to charge iPad Air when using the camera connection kit?
    No can do, Skippy!

  • Cant hear monitor when using usb mic

    hey all, question. when my usb mic is plugged in and armed for recording, i cant hear the previous track to keep my timing. the built in mic isnt that great so i like to use my external. its like when its plugged in it overrides all monitor functions. i just wanna be able to record a track while the previous one plays back. thanks guys for the help with an obvious newby.

    Make sure you have the correct output selected in GB Prefs>Audio/MIDI. I assume you're using your computer speakers? If so select Built-In Output. Also make sure the recorded Track isn't muted and that the volume is up.

  • Audio Output Corruption when using USB MIDI keyboard controller

    recently, i'm getting intermittent corrupted audio output (short blips of distortion) while playing through my usb midi keyboard. i thought maybe some data got corrupted on the disk over time so i wiped the drive, reinstalled osx, installed all updates, hooked up usb keyboard and all worked fine. today, i plugged in the keyboard and the distortions have reappeared. i unplugged the keyboard and played with the Musical Typing- still distorted. i rebooted and tried Musical Typing- still distorted. I removed the usb midi keyboard device from Audio MIDI Setup, rebooted, and the distortions have disappeared when using Musical Typing. Connecting the keyboard causes the distortions to reappear. I'm at a loss.
    Any ideas?
    environment:
    macbook pro
    osx 10.4.11
    gb 4.1.2
    studiologic vmk188 plus

    UPDATE:
    I decided to try going through an Firewire Audio Interface instead. Keyboard-(MIDI)->MOTU Traveler-(Firewire)->MacBook Pro.
    Same corruption/hiccups/choppy playback.

  • Satellite Pro P300-1CG wakes up from sleep mode when unplug USB mouse

    I often transport my laptop from one working place to another.
    Usually put it into sleep mode, unplug the USB mouse and lay in the bag.
    However every time I unplug the USB mouse - the laptop wakes up and I have to put it into sleep again.
    This is annoying. Is there any way to set up laptop _not_ to wake up on USB activity?
    I didn't find any option in power settings of Vista, neither in BIOS.
    My BIOS is up to date (just updated, but didn't help).
    I use Windows Vista Business on Toshiba Satellite Pro P300-1CG.

    Hi
    > Usually put it into sleep mode, unplug the USB mouse and lay in the bag.
    Why you dont unplug the USB mouse firstly and then put the notebook into the sleep mode?
    This would solve your issue ;)
    From my knowledge the BIOS provides only the options: Wake-up on keyboard and Wake up on LAN.
    There are no options for Wake up on USB and therefore such settings cannot be changed...
    Cheers

  • Forms 5 Runtime crashes when using wheel mouse

    Hi,
    We get Invalid Page Faults when using a wheel mouse in Forms
    (Forms 5.0.6.8.0). When scrolling up to the first record the
    message 'At first record' occurs. Then we get a ORA-00001 error
    (!?), followed by the invalid page fault and forms runtime
    crashes. Other actions (scrolling down, scrolling up, but not to
    first record) work fine. I suppose there exist a patch to solve
    this problem, but I wasn't able to find it. Could someone please
    help me ?
    Thanks.
    Koen

    Crashing is normal Forms 5 behavior. Why should a wheel mouse
    make it better? :-)
    If you use Patch 10 (get it on metalink) for D2K Forms 5 on
    Windows (and a good mouse driver), this problem is almost gone.
    But be warned:
    Patch 10 introduces other more serious bugs (serious printing
    problems with HP printer, and such funny things as mysterious
    disappearing items items in large forms ... we stopped the
    rollout of Patch 19 half the way) , and these bugs
    will never be fixed 'cause D2K R2.1 is desupported since
    december 1999.
    So choose your fate.
    HTH Schlo
    BTW: There is a Patch 11, but it is not worth downloading.

  • Random crashes when using USB drive with Creatie Suite

    I have a 24" Intel IMAC and when using a SanDisk Cruzer Titanium 2GB and Creative Suite I eperience random crashes in CS. When I remove th drive it works fine, any known issues when using Rosetta apps and USB drives?
    thanks

    So a guy goes into his doctors office and tells his doctor "Ya gotta
    help me doc...it hurts when I run my head into the door like
    this...OW!". Then the doctor says:
    "DON'T DO THAT ANY MORE!!!"
    (I promise to keep my day job...oops what job...and not go into
    comedy..)
    Why don't you convert all the old 16 bit code into 32 bit code and
    create one application where the various parts all know about each
    other? I don't think that there's any way to coordinate an old 16 bit
    LV and a new 32 bit LV application so that they don't step on each
    other driverwise like they appear to be doing. I don't think that the
    two LabVIEW's even know that the other exists!
    Alternatively, get a second computer to run the 16 bit code on and
    make the two apps communicate with
    each other using TCP/IP or serial.
    Doug De Clue
    [email protected]
    cincidude wrote in message news:<[email protected]>...
    > I am using 2 versions of Labview at the same time, one is version 4
    > which has a camera and a weigh-in-motion scale attached to it. The
    > second is either Labview version 4, 16-bit or Labview 3.0.1, 16-bit,
    > i'm not sure. The sixteen bit has a data acquisition system attached
    > to it. Its an optim electronics system and the 16-bit Labview drivers
    > for the optim were provided by Optim electronics and so I am stuck
    > with using the same system. When I use both these systems in tandem,
    > the system crashes frequently, but both systems run fine
    > independently. It usually just freezes up or says "Illegal operation
    > performed. Contact program vendor". Its a windows error with a red
    > cross.

Maybe you are looking for