IRQ or DMA problem with AT-MIO-16XE-50
This board run perfectly on a platform AMD K6-2 with Win98SE. But, it is impossible to run it on platforms Intel (PIII and 440bx) with Win2000pro as with Win98SE. The board is recognized by the system. No conflict is announced. But the test on NiDAQ indicates that the board do not answer first IRQ. Among all my tests, I sometimes obtained the message does not answer first channel DMA.
I tested various BIOS configurations and various configurations of the material resources. It would be impossible for me to describe them. Help me please...
"lexam" wrote in message
news:[email protected]..
> This board run perfectly on a platform AMD K6-2 with Win98SE. But, it
> is impossible to run it on platforms Intel (PIII and 440bx) with
> Win2000pro as with Win98SE. The board is recognized by the system. No
> conflict is announced. But the test on NiDAQ indicates that the board
> do not answer first IRQ. Among all my tests, I sometimes obtained the
> message does not answer first channel DMA.
> I tested various BIOS configurations and various configurations of the
> material resources. It would be impossible for me to describe them.
> Help me please...
In this very same newgroup
on date Wed, 3 Mar 2004 06:33:37 -0600 and
under subject heading "using ni
-daq 7.1 traditional for AT-AI-16XE-10 first
DMA channel doesn't respond"
and NI reference :
<[email protected]>
I asked the original poster to reply if he/she used a sound card and I
therefore I have no way to tell if this suggestion will be solve the
problem. It looks that you already investigated various possibilities for
unknown reason of DMA channel failure. May I suggest the same that I could
have suggested in details before?. If you have a sound card - uninstall the
sound card software. Uninstall the sound card itself. Now try your NI card
AT-AI-16XE-10. Note that some sound card drivers (particularly the ones for
MS DOS) do not get uninstalled easily even though the Windows uninstall
utility might certify that the stuff has been successfully uninstalled
(particulary for older OSs like Win95, Win98). Generally the sound card
manufacturer gives the details on removing drivers for their sound cards.
My logic is that the sound card driver ge
ts hold of DMA channels (atleast
two of them) before any other driver has even chance to choose.
If you do not have a sound card try finding out how the DMA channels are
allocated.
HTH
Mohan Pawar
Similar Messages
-
Problem integrating PCI-MIO-16XE-50 and AMUX-64 T multiplexer
I can test the PCI-MIO-16XE-50 card in MAX but i can not test the virtual channels
Hey Hiral,
The AMUX-64T does not support virtual channels. You'll need to acquire the data and then perform the required scaling in software. The following document discusses how to access the appropriate channels.
How do I Address an AMUX-64T with an MIO Board?
This next document may also be useful. It discusses how to perform the necessary scaling for a thermocouple channel in LabVIEW.
Taking Thermocouple Measurements Using the AMUX-64T
I hope this helps!
Sarah Miracle
National Instruments -
Upgrade win98/LV4 to win2000/LV6: Speed problems with AT-MIO-16E
I found that in Windows 2000 with Labview 6 the readout rate of our AT-MIO-16E board drops to approx. 2.5 kHz max. (before approx. 11.5 kHz in Windows 98 with Labview 4 ) using the 'AI single scan' VI (see attached scheme for the readout routine). I don't know if this is due to Win2000 or due to the new NI-DAQ drivers, but for our timing-critical application this is unacceptable.
Are there any suggestions about how to accellerate the readout of the AT-MIO-16E board?
With best thanks,
Thomas Schultz
Attachments:
AT-MIO-16E_DAQ_example.bmp 161 KBHi Thomas,
Here is another idea I can give but will be of limited use in chasing it down.
Make sure the board is using DMA.
DMA is alot faster than CPU based data transfers.
Maybe durring the softeware conversion, the board got installed without DMA enabled.
Just an idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
How can I install the AT-MIO-16-L-25 under windows 2000? I tryed Ni-Daq 6.1 but it crash during the card selection and the new Ni-Daq versions don't propose to install the AT-MIO-16-L-25.
Thanks to reply me.Please submit your questions in the Measurement Hardware -> Multifunction DAQ section of the discussion forum. That section will address NI-DAQ related questions.
The Measurement Hardware DDK does not support legacy MIO cards. RLP support for legacy MIO hardware (AT-MIO-...) can be found on the NI web site.
Christian L
Systems Engineer
NICS, National Instruments
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense -
Dear all,
I'm in a beginner with NI-DAQ instrument.
In our lab, AT-MIO-16X(ISA slot/Windows 98/Win32 API programming) have used by collecting experimental data.
Recently, I have modified some ADC program code by using well-operated routine which have already been used.
The data collection(using GETADC() with AI_READ function or direct address access) was failed. The data were very noisy but have a sinusoidal form. I mean the data showed the same values peridoically. The unmodified routine read them correctly. The noisy signal could not removed even in the test of using an well defined signal.
As you may know well, ADC routine have no parameters I have to sent.
The overall code was not long statements(about 20 lines) and I have to poi
nt out that the routine used the almost same function with unmoidfied.
It just read data from the NI-DAQ.
The TEST PANEL from NI showed the data correctly.
If I measured the data under executing TEST PANEL, my program read the data correctly with a failure sometimes.
I don't know why this happened.
I changed the physical address of AT-MIO-16X but it was useless.
Could you give any recommendations or what I should check the card?
Thank you in advance.Labmaster,
My understanding of the issue is that your original application appears to acquire data cleanly and successfully. However, you modified part of the program, and now you acquire noisy data. If you are concerned that there may be something wrong with the card now, simply revert back to your old program and make sure it works correctly again. If it does work correctly, then you will need to check the modification you made to the program and make sure you aren't making a mistake in your code. Good luck. -
How to do a single channel DAQ using NI-DAQ driver software with a PCI-MIO-16XE-10 card
Hi,
I would like to find out how I could do a simple one channel Data Acquisition from a signal generator using the NI-DAQ driver software with a PCI-MIO-16XE-10 card.
I have written some test problem but even when the signal generator is turned on/off I get back some weird values.
Here is my code.
CString sFunctionName("");
double volt[OUTPUT_POINTS*2];
double out[OUTPUT_POINTS*2];
short timebase, ready, code, stopped;
unsigned short sampleInterval;
int i, status, count=0;
unsigned long update, points;
short* ai_buffer;
short output_ch_vector[16];
int local_ITERATIONS = 2;
SAFEARRAYBOUND bound[1];
double dataItem = 9.9;
long j;
long k;
double* pTheValues;
LPTSTR lpsz_ErrMsg;
// Initialise device
status = Init_DA_Brds (deviceNumber, deviceNumberCode)
Initializes the hardware and software states of a National Instruments
DAQ device to its default state and returns a numeric device code that
corresponds to the type of device initialized
Init_DA_Brds(DEVICE, &code);
// Check return code from Init_DA_Brds
Code return should be 204: PCI-MIO-16XE-10.
if (code < 0)
CString sError;
sError.Format("Code error: %d", code);
if (code == -1)
sError = sError + ": No device found";
LPTSTR lpsz = new TCHAR[sError.GetLength()+1];
_tcscpy(lpsz, sError);
AfxMessageBox(lpsz);
delete lpsz;
return S_FALSE;
// Allocate memory for analog output and input arrays
//ao_buffer = new short[OUTPUT_POINTS*2];
ai_buffer = new short[OUTPUT_POINTS];
// Set double-buffering
status = DAQ_DB_Config (deviceNumber, DBmode)
Enables or disables double-buffered DAQ operations.
status = DAQ_DB_Config(DEVICE, 1);
if (status < 0 )
sFunctionName = "DAQ_DB_Config";
goto TidyUp;
// Get the rate parameters
status = DAQ_Rate (rate, units, timebase, sampleInterval)
Converts a DAQ rate into the timebase and sample-interval
values needed to produce the rate you want.
status = DAQ_Rate(RATE, 0, &timebase, &sampleInterval);
if (status < 0 )
sFunctionName = "DAQ_Rate";
goto TidyUp;
// Setup scan
status = SCAN_Setup (deviceNumber, numChans, chanVector, gainVector)
Initializes circuitry for a scanned data acquisition operation.
Initialization includes storing a table of the channel sequence
and gain setting for each channel to be digitized
status = SCAN_Setup(DEVICE, 1, ai_channels, gain);
if (status < 0 )
sFunctionName = "SCAN_Setup";
goto TidyUp;
status = SCAN_Start (deviceNumber, buffer, count, sampTimebase,
sampInterval, scanTimebase, scanInterval)
Initiates a multiple-channel scanned data acquisition operation,
with or without interval scanning, and stores its input in an array
status = SCAN_Start(DEVICE, ai_buffer, OUTPUT_POINTS, timebase, sampleInterval, timebase, 1000);
if (status < 0 )
sFunctionName = "SCAN_Start";
goto TidyUp;
while(count < local_ITERATIONS)
// Check whether we are ready to input another half-buffer
status = DAQ_DB_HalfReady(DEVICE, &ready, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_HalfReady";
goto TidyUp;
if (ready == 1)
status = DAQ_DB_Transfer(DEVICE, ai_buffer, &points, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_Transfer";
goto TidyUp;
count++;
// Clear the analog input
status = DAQ_Clear (deviceNumber)
Cancels the current DAQ operation
(both single-channel and multiple-channel scanned) and reinitializes the DAQ circuitry.
status = DAQ_Clear(DEVICE);
if (status < 0 )
sFunctionName = "DAQ_Clear";
goto TidyUp;
status = SCAN_Demux (buffer, count, numChans, numMuxBrds)
Rearranges, or demultiplexes, data acquired by a SCAN operation
into row-major order, that is, each row of the array holding the
data corresponds to a scanned channel
status = SCAN_Demux(ai_buffer, OUTPUT_POINTS * 2, 2, 0);
if (status < 0 )
sFunctionName = "SCAN_Demux";
goto TidyUp;
//Convert binary values to voltages (Doesn't actually take a reading from board)
status = DAQ_VScale (deviceNumber, chan, gain, gainAdjust, offset, count, binArray, voltArray)
Converts the values of an array of acquired binary data and the gain setting for that data
to actual input voltages measured.
status = DAQ_VScale (1, 0, 1, 1.0, 0.0, OUTPUT_POINTS , ai_buffer, volt);
if (status < 0 )
sFunctionName = "DAQ_VScale";
goto TidyUp;Hello,
Please take a look at lots of examples available at :
1. www.ni.com >> NI Developer Zone >> Development Library >> Measurement Hardware
2. C:\program files\national instruments\ni-daq\examples\visualc
Sincerely,
Sastry V.
Applications Engineer
National Instruments -
K8N 7030 BIG Strange problem with DMA?
My conf.
2 x 80 GB SATA RAID STRIPE (WINXP)
1 x 160 GB PATA
1 x DVD LITEON PATA
2 x 512MB KINGMAX
Wireless PCI planet
Ieee 1394 PCI
6800GT AGP galaxy
PSU 500W
BIOS 2.1
Recently I saw that my hdd (160GB PATA) didnt work in udma 5 (worked in pio) and dvd worked in pio (in bios was activated dma etc.) This problem was not always. Begin I thought that controller in mobo is broken. I put in pci pata controller and it can`t work if I turn off the ide controller in mobo. But when i turn off IDE controller in mobo, RAID can`t work (its silly because RAID is sata not pata). After this sound card in mobo desappeard. Even I unplug all pci devices the sound card completly deasappeard. I update bios the same version and reset bios...and it helps. Now, dvd and hdd works, but I think it could repeat. Where is a problem?Quote from: Slepy on 05-June-06, 23:20:59
I don`t have a time for new instalation windows. I think the problem isnt in windows. Maybe drivers, but if it was a problem, why the sound card deasappeard even I reinstall all drivers? I suspect bios. It can be problem with sharing IRQ. Now I have Bios ver. 2.1
syar said me:
"nvidia ide/sata drivers needs to be matched (in version) with the nvidia raid class driver .
You need to be careful installing windows and updating/installing nvidia UDP driverpackage
for NF3 .
It has an error in it , it never updates the nvraid driver (when you select to install the NV IDE sw
drivers).
Yes it's true what Syar's say. But beware if you neva do properly you may screw up your Raid array. But it's better to do manual flashing the Bios if want to flashed it. If your system is stabile and did not bring any problems then you shouldn't flashed it. Also I'll do back the array again and do the fresh installation. BTW you must used the Nvidia driver 5.10 it's more stabil and safe rather than 5.11. Gd luck.
This can leave you with mismatched nvraid and ide/sata driver .
Nvraid driver with version from the floppy disk used in win install, and nv ide/sata drivers with
the version from the UDP driver pack install .
Other than that I have heard mostly bad things of all MS-7030 bioses after 1.7 .
I have one rig at home with K8N Neo Platinum (MS-7030) running with bios 1.5B6(modded)
with raid-0 and it's been acting like a champ . No need for any "newer" bios . -
I'm hoping someone can help me. I have executable labview programs created in another lab which used a PCI-MIO-16XE-10 card. I need to install these programs in a new lab which has a PCI-MIO-16XE-50 card installed. When downloading the executable files, Measurement and Automation Explorer gave a message that the physical devices could not be located. I presume this is because the executables are configured for the PCI-MIO-16XE-10 but the PCI-MIO-16XE-50 is installed instead. Any suggestions on how to get these programs configured with the PCI-MIO-16XE-50 would be greatly appreciated? Thanks.
As long as you have the device identifier of the PCI-MIO-16XE-50 set the same as the PCI-MIO-16XE-10 for which the program was written, you shouldn't have a problem doing what you describe.
One thing that confused me about your posting, however, is the statement When downloading the executable files, Measurement and Automation Explorer gave a message that the physical devices could not be located. This doesn't make sense to me. You're getting an error from MAX when downloading your program? MAX shouldn't be involved at all here, and especially not when just downloading your program. If you can provide more details about exactly what you are doing (maybe post some screenshots) then I'm sure we can help you get your program working.
Good luck,
Joe -
Can I generate sine and square waves with NI PCI-MIO-16XE-50 card??
Can I generate sine and square waves with NI PCI-MIO-16XE-50 card??
How Do I generate those signals?Hello;
You certainly can do that. The way to go about that is to use one of the Analog Output channels your board have available.
If you are using Labview to program the board, you can find good examples at Search Examples->I/O Interfaces->Data Acquisition->Analog Output->Multiple Point (buffered) Analog Output.
If you are using other Software language to program the board, you can fing examples at C:\Program Files\National Instruments\NI-DAQ\example\VisualC\AO.
Hope this helps.
Filipe -
Replacing an AT-MIO-16X with a PCI-MIO-16XE
Updating an old system we upgrade DAQ card with one we tough was "all" identical, but I found that the DIO port is not. In fact the MIO-16X can be define as an 4 bits port but not the new card PCI-MIO-16XE-10. Unfortunately the Vi we are using was design with the 4 bits capability (4: Input, 4 Output). To minimize the modification of the software any suggestion...
Hello;
You didn't mention what Software language is being used to program the board, but, the best way to go about that is to mask the port, so you can have 4 bits working as input or output.
If you mask the port, you can still use your code as the port was a 4 bit port.
Hope this helps.
Filipe -
Simultaneous sampling with a PCI-MIO-16XE-10 board
Hello,
I am using LabView with a PCI-MIO-16XE-10 board. I would like to make simultaneous sampling in multi channels. How can I do?
Thank you for your help.Your question should be posted under "Measurement Devices >> Multifunction I/O" instead of "Real-Time DAQ" because the PCI-MIO-16XE-10 board is not a real-time device. The category "Real-Time DAQ" is reserved for 7030 real-time devices.
The PCI-MIO-16XE-10 multiplexes channels across one amp and one A/D converter; therefore, it cannot perform true simultaneous sampling. Consider using the SC-2040 accessory, which has 8 simultaneously sampling differential amplifiers. Alternately, you can purchase a different board like the PCI-6110, which can perform true simultaneous sampling because it has individual A/D converters and amps for each channel. -
Problems with DMA (WinXP + MSI K7N2-Delta)
Hi!
I'm having problems with my IDE dvd-burner (NEC-1300) as I can't get it to use DMA in Windows XP. The motherboard is a MSI K7N2-Delta. I've tried using Nvidia's newest driverpack, 2.45, but in vain. The only mode I can use is PIO and it slows slows down the computer.
Thanks in advance!
Jussi TeppoQuote
Originally posted by
wonkanoby
what drives make models in pc in detail
what else is on each ide
hows every thing jumpered
is it a modern 80 wire ide lead
On Primary Master I have a 60Gb Seagate Barracuda ATA IV. And the Secondary Master is the NEC-1300 http://www.necd.de/productdetail.php/id/672, which is supposed to be fully capable of UDMA-2 (33) as all the modern drives are (some are even UDMA66). The drive are jumpered as Masters. The wires are ok (UDMA100).
Registry editing suggested in a another message didn't work, neither did deleting the ide-channel.
I found a temporary solution to this: I placed the DVD-RW as Primary Slave and it works. The drive is detected as UDMA33-capable. Why it doesn't work as Secondary Master is beyond my knowledge.
Raven_
Yes, you guessed it. I do indeed live in Finland. Hur är läget?
Thanks to everyone for the effort!
Jussi Teppo -
AT-MIO-16XE-50 device is not responding to the selected base address
I'm trying to install my AT-MIO-16XE-50 DAQ board onto my Windows NT desktop computer, but I'm having trouble.
Here's what I've done: I've installed LabView 5.1 and the NIDAQ 7.0 software onto my computer first. Then I've physically installed the DAQ board into my computer. After starting the computer, the plug-and-play system seems to recognize the new hardware and install drivers for it. It then says I need to reboot the computer, so I reboot the computer.
When I then look at my device manager, it lists AT-MIO-16XE-50 twice. Under the properties/resources tab, one of them lists "input/output range", "interrupt request", "direct memory access", and "direct memory access" (i.e., 2 "direct memory access"s). The second one only lists "direct memory access" once and nothing else under the properties/resources tab. Also, the first one says that it is working properly while the second one says that it is not working properly (Code 10). I've played around with chaging the "direct
memory access" numbers and after rebooting the computer have gotten both AT-MIO-16XE-50's in the device manager to say that they're working properly. So, now the DAQ board appears to be installed correctly, because the device manager reports no problems with it. However, there are still 2 of them. My first question is this: should there be only 1 entry in the device manager list, or are there supposed to be the 2 that I see? The entries do appear to be different from each other, but they're for the same device, so that's a little confusing.
When I open my Measurement and Automation explorer, only one AT-MIO-16XE-50 device is listed (so this looks good), and under "properties" all 3 "direct memory access" numbers are listed. So, this all seems good. But, when I click on "test resources" or "test panel", I get an error message saying that "the device is not responding to the selected base address". Considering that this device was plug-and-play, and I did not set the base address manually, I don't understand why I'm getting this error message.
What I've tried is to change the "input/output range" number by using the device manager. I've tried a few different settings (rebooting the computer after each change) and none of the different "input/output range" settings seem to work.
I'd appreciate it if you could give me any help on figuring out how to resolve this "not responding to base address" problem. The info on your web site
appears to suggest flipping dip-switches on the DAQ card, but my card does not have any dip switches because it is plug-and-play. So, right now I'm
clueless! Thanks for reading this, and I hope that you have more insight than I do.Smaria,
The AT-MIO-16XE-50 shows up twice in the Device Manager because it reserves three DMA channels, and the ISA bus only allows two DMA channels per ISA slot. You mentioned that you were able to get both devices working properly in the Device Manager. Below is a link to a KnowledgeBase that describes the proper procedure to successfully accomplish this. You should verify that this is the procedure you followed:
Exclamation Mark Appears with Error Code 10 on Windows XP/2000/98 After Installing AT-MIO-16E-10
Spencer S. -
[SOLVED?] Problem with nVidia card
This is my first post, so; hello to everyone!! Thx in advance to this great community!!
My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
The Xorg.0.log and dmesg.log files are atached at the end of this thread.
I hope that annyone can help me.
Thx in advance again.
The Xorg.0.log file contains this:
[ 15.809]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 15.814] X Protocol Version 11, Revision 0
[ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
[ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
[ 15.815] Kernel command line: root=/dev/sda5 ro
[ 15.815] Build Date: 09 July 2011 07:57:07AM
[ 15.815]
[ 15.815] Current version of pixman: 0.22.2
[ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
[ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
[ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.835] (==) ServerLayout "Layout0"
[ 15.835] (**) |-->Screen "Screen0" (0)
[ 15.835] (**) | |-->Monitor "Monitor0"
[ 15.836] (**) | |-->Device "Device0"
[ 15.836] (**) |-->Input Device "Keyboard0"
[ 15.836] (**) |-->Input Device "Mouse0"
[ 15.836] (==) Automatically adding devices
[ 15.836] (==) Automatically enabling devices
[ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.859] Entry deleted from font path.
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.859] Entry deleted from font path.
[ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.859] (==) FontPath set to:
/usr/share/fonts/misc/
[ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.859] (**) Extension "Composite" is disabled
[ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 15.859] (WW) Disabling Keyboard0
[ 15.859] (WW) Disabling Mouse0
[ 15.859] (II) Loader magic: 0x822e1a0
[ 15.859] (II) Module ABI versions:
[ 15.859] X.Org ANSI C Emulation: 0.4
[ 15.859] X.Org Video Driver: 10.0
[ 15.859] X.Org XInput driver : 12.2
[ 15.859] X.Org Server Extension : 5.0
[ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.860] (II) LoadModule: "extmod"
[ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.880] (II) Module extmod: vendor="X.Org Foundation"
[ 15.880] compiled for 1.10.3, module version = 1.0.0
[ 15.880] Module class: X.Org Server Extension
[ 15.880] ABI class: X.Org Server Extension, version 5.0
[ 15.880] (II) Loading extension MIT-SCREEN-SAVER
[ 15.880] (II) Loading extension XFree86-VidModeExtension
[ 15.880] (II) Loading extension XFree86-DGA
[ 15.880] (II) Loading extension DPMS
[ 15.880] (II) Loading extension XVideo
[ 15.880] (II) Loading extension XVideo-MotionCompensation
[ 15.880] (II) Loading extension X-Resource
[ 15.880] (II) LoadModule: "dbe"
[ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.881] (II) Module dbe: vendor="X.Org Foundation"
[ 15.881] compiled for 1.10.3, module version = 1.0.0
[ 15.881] Module class: X.Org Server Extension
[ 15.881] ABI class: X.Org Server Extension, version 5.0
[ 15.881] (II) Loading extension DOUBLE-BUFFER
[ 15.881] (II) LoadModule: "glx"
[ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
[ 16.640] compiled for 4.0.2, module version = 1.0.0
[ 16.640] Module class: X.Org Server Extension
[ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
[ 16.640] (II) Loading extension GLX
[ 16.640] (II) LoadModule: "record"
[ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 16.645] (II) Module record: vendor="X.Org Foundation"
[ 16.645] compiled for 1.10.3, module version = 1.13.0
[ 16.645] Module class: X.Org Server Extension
[ 16.645] ABI class: X.Org Server Extension, version 5.0
[ 16.645] (II) Loading extension RECORD
[ 16.645] (II) LoadModule: "dri"
[ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.661] (II) Module dri: vendor="X.Org Foundation"
[ 16.661] compiled for 1.10.3, module version = 1.0.0
[ 16.661] ABI class: X.Org Server Extension, version 5.0
[ 16.661] (II) Loading extension XFree86-DRI
[ 16.661] (II) LoadModule: "dri2"
[ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.662] (II) Module dri2: vendor="X.Org Foundation"
[ 16.662] compiled for 1.10.3, module version = 1.2.0
[ 16.662] ABI class: X.Org Server Extension, version 5.0
[ 16.662] (II) Loading extension DRI2
[ 16.662] (II) LoadModule: "nvidia"
[ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 16.709] compiled for 4.0.2, module version = 1.0.0
[ 16.709] Module class: X.Org Video Driver
[ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
[ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 16.740] (++) using VT number 7
[ 16.751] (II) Loading sub module "fb"
[ 16.751] (II) LoadModule: "fb"
[ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.762] (II) Module fb: vendor="X.Org Foundation"
[ 16.762] compiled for 1.10.3, module version = 1.0.0
[ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.762] (II) Loading sub module "wfb"
[ 16.762] (II) LoadModule: "wfb"
[ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.769] (II) Module wfb: vendor="X.Org Foundation"
[ 16.769] compiled for 1.10.3, module version = 1.0.0
[ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.769] (II) Loading sub module "ramdac"
[ 16.769] (II) LoadModule: "ramdac"
[ 16.769] (II) Module "ramdac" already built-in
[ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.780] (==) NVIDIA(0): RGB weight 888
[ 16.780] (==) NVIDIA(0): Default visual is TrueColor
[ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
[ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
[ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
[ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
[ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 17.859] (==) NVIDIA(0):
[ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 17.859] (==) NVIDIA(0): will be used as the requested mode.
[ 17.859] (==) NVIDIA(0):
[ 17.859] (II) NVIDIA(0): Validated modes:
[ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
[ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
[ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
[ 17.900] (--) NVIDIA(0): option
[ 17.900] (--) Depth 24 pixmap format is 32 bpp
[ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 17.905] (II) NVIDIA(0): Config Options in the README.
[ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 17.946] (II) Loading extension NV-GLX
[ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.002] (==) NVIDIA(0): Backing store disabled
[ 18.002] (==) NVIDIA(0): Silken mouse enabled
[ 18.002] (**) NVIDIA(0): DPMS enabled
[ 18.002] (II) Loading extension NV-CONTROL
[ 18.003] (II) Loading extension XINERAMA
[ 18.003] (II) Loading sub module "dri2"
[ 18.003] (II) LoadModule: "dri2"
[ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.003] (II) Module dri2: vendor="X.Org Foundation"
[ 18.003] compiled for 1.10.3, module version = 1.2.0
[ 18.003] ABI class: X.Org Server Extension, version 5.0
[ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.003] (==) RandR enabled
[ 18.003] (II) Initializing built-in extension Generic Event Extension
[ 18.003] (II) Initializing built-in extension SHAPE
[ 18.003] (II) Initializing built-in extension MIT-SHM
[ 18.003] (II) Initializing built-in extension XInputExtension
[ 18.003] (II) Initializing built-in extension XTEST
[ 18.003] (II) Initializing built-in extension BIG-REQUESTS
[ 18.003] (II) Initializing built-in extension SYNC
[ 18.003] (II) Initializing built-in extension XKEYBOARD
[ 18.003] (II) Initializing built-in extension XC-MISC
[ 18.003] (II) Initializing built-in extension SECURITY
[ 18.003] (II) Initializing built-in extension XINERAMA
[ 18.003] (II) Initializing built-in extension XFIXES
[ 18.003] (II) Initializing built-in extension RENDER
[ 18.003] (II) Initializing built-in extension RANDR
[ 18.003] (II) Initializing built-in extension COMPOSITE
[ 18.003] (II) Initializing built-in extension DAMAGE
[ 18.005] (II) Initializing extension GLX
[ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.213] (II) LoadModule: "evdev"
[ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (II) Module evdev: vendor="X.Org Foundation"
[ 18.214] compiled for 1.10.0, module version = 2.6.0
[ 18.214] Module class: X.Org XInput Driver
[ 18.214] ABI class: X.Org XInput driver, version 12.2
[ 18.214] (II) Using input driver 'evdev' for 'Power Button'
[ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.214] (**) Power Button: always reports core events
[ 18.214] (**) Power Button: Device: "/dev/input/event3"
[ 18.226] (--) Power Button: Found keys
[ 18.226] (II) Power Button: Configuring as keyboard
[ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.226] (**) Option "xkb_rules" "evdev"
[ 18.226] (**) Option "xkb_model" "evdev"
[ 18.226] (**) Option "xkb_layout" "us"
[ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.252] (II) Using input driver 'evdev' for 'Power Button'
[ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.252] (**) Power Button: always reports core events
[ 18.252] (**) Power Button: Device: "/dev/input/event2"
[ 18.266] (--) Power Button: Found keys
[ 18.266] (II) Power Button: Configuring as keyboard
[ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 18.266] (**) Option "xkb_rules" "evdev"
[ 18.266] (**) Option "xkb_model" "evdev"
[ 18.266] (**) Option "xkb_layout" "us"
[ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
[ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
[ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
[ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
[ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
[ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
[ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
[ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
[ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
[ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
[ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
[ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
[ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
[ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
[ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
[ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
[ 18.283] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
[ 18.285] (II) No input driver/identifier specified (ignoring)
[ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 18.300] (--) AT Translated Set 2 keyboard: Found keys
[ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 18.300] (**) Option "xkb_rules" "evdev"
[ 18.300] (**) Option "xkb_model" "evdev"
[ 18.300] (**) Option "xkb_layout" "us"
[ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 18.300] (II) No input driver/identifier specified (ignoring)
[ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1563.587] (II) NVIDIA(0): Config Options in the README.
And the dmesg.log file contains this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF uncachable
[ 0.000000] D0000-D3FFF write-back
[ 0.000000] D4000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f41f0] f41f0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
[ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
[ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
[ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
[ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7fff0000 00040
[ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fff0
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] Kernel command line: root=/dev/sda5 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8388096 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
[ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2700.236 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
[ 0.016870] pid_max: default: 32768 minimum: 301
[ 0.016983] Security Framework initialized
[ 0.017051] AppArmor: AppArmor disabled by boot time parameter
[ 0.017144] Mount-cache hash table entries: 512
[ 0.017404] Initializing cgroup subsys ns
[ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.017549] Initializing cgroup subsys cpuacct
[ 0.017625] Initializing cgroup subsys memory
[ 0.017701] Initializing cgroup subsys devices
[ 0.017767] Initializing cgroup subsys freezer
[ 0.017833] Initializing cgroup subsys net_cls
[ 0.017899] Initializing cgroup subsys blkio
[ 0.017995] CPU: Physical Processor ID: 0
[ 0.018060] CPU: Processor Core ID: 0
[ 0.018126] mce: CPU supports 5 MCE banks
[ 0.018199] using C1E aware idle routine
[ 0.019127] ACPI: Core revision 20110316
[ 0.023362] ftrace: allocating 15225 entries in 30 pages
[ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[ 0.063329] Performance Events: AMD PMU driver.
[ 0.063329] ... version: 0
[ 0.063329] ... bit width: 48
[ 0.063329] ... generic registers: 4
[ 0.063329] ... value mask: 0000ffffffffffff
[ 0.063329] ... max period: 00007fffffffffff
[ 0.063329] ... fixed-purpose events: 0
[ 0.063329] ... event mask: 000000000000000f
[ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[ 0.106676] Booting Node 0, Processors #1
[ 0.106783] smpboot cpu 1: start_ip = 9b000
[ 0.019998] Initializing CPU#1
[ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206657] Brought up 2 CPUs
[ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
[ 0.207206] devtmpfs: initialized
[ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
[ 0.207649] print_constraints: dummy:
[ 0.207764] NET: Registered protocol family 16
[ 0.207919] node 0 link 0: io port [c000, ffff]
[ 0.207922] TOM: 0000000080000000 aka 2048M
[ 0.207987] node 0 link 0: mmio [a0000, bffff]
[ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
[ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.207997] bus: [00, 03] on node 0 link 0
[ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
[ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.208011] ACPI: bus type pci registered
[ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.208292] PCI: Using MMCONFIG for extended config space
[ 0.208357] PCI: Using configuration type 1 for base access
[ 0.208842] bio: create slab <bio-0> at 0
[ 0.210574] ACPI: EC: Look up EC in DSDT
[ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.214150] ACPI: Interpreter enabled
[ 0.214220] ACPI: (supports S0 S3 S4 S5)
[ 0.214501] ACPI: Using IOAPIC for interrupt routing
[ 0.225790] ACPI: No dock devices found.
[ 0.225854] HEST: Table not found.
[ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.226639] pci 0000:00:02.0: PME# disabled
[ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.226696] pci 0000:00:0a.0: PME# disabled
[ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
[ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.227351] pci 0000:00:13.5: supports D1 D2
[ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.227357] pci 0000:00:13.5: PME# disabled
[ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.227667] pci 0000:00:14.2: PME# disabled
[ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
[ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.233535] pci 0000:02:00.0: supports D1 D2
[ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233541] pci 0000:02:00.0: PME# disabled
[ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.240236] pci_bus 0000:00: on NUMA node 0
[ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.258522] vgaarb: loaded
[ 0.258678] PCI: Using ACPI for IRQ routing
[ 0.258742] PCI: pci_cache_line_size set to 64 bytes
[ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
[ 0.259004] NetLabel: Initializing
[ 0.259067] NetLabel: domain hash size = 128
[ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259205] NetLabel: unlabeled traffic allowed by default
[ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.261015] Switching to clocksource hpet
[ 0.261499] Switched to NOHz mode on CPU #0
[ 0.261582] Switched to NOHz mode on CPU #1
[ 0.266362] pnp: PnP ACPI init
[ 0.266443] ACPI: bus type pnp registered
[ 0.266593] pnp 00:00: [bus 00-ff]
[ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.266792] pnp 00:01: [io 0x4100-0x411f]
[ 0.266794] pnp 00:01: [io 0x0228-0x022f]
[ 0.266796] pnp 00:01: [io 0x040b]
[ 0.266798] pnp 00:01: [io 0x04d6]
[ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
[ 0.266801] pnp 00:01: [io 0x0c14]
[ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
[ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
[ 0.266807] pnp 00:01: [io 0x0c6f]
[ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
[ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
[ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
[ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
[ 0.266815] pnp 00:01: [io 0x4210-0x4217]
[ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
[ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
[ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.267264] system 00:01: [io 0x040b] has been reserved
[ 0.267330] system 00:01: [io 0x04d6] has been reserved
[ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.267461] system 00:01: [io 0x0c14] has been reserved
[ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.267662] system 00:01: [io 0x0c6f] has been reserved
[ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268290] pnp 00:02: [dma 4]
[ 0.268291] pnp 00:02: [io 0x0000-0x000f]
[ 0.268293] pnp 00:02: [io 0x0080-0x0090]
[ 0.268295] pnp 00:02: [io 0x0094-0x009f]
[ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
[ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.268366] pnp 00:03: [irq 0 disabled]
[ 0.268380] pnp 00:03: [irq 8]
[ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.268430] pnp 00:04: [io 0x0070-0x0073]
[ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268463] pnp 00:05: [io 0x0061]
[ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.268504] pnp 00:06: [irq 13]
[ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.268566] pnp 00:07: [io 0x0010-0x001f]
[ 0.268567] pnp 00:07: [io 0x0022-0x003f]
[ 0.268569] pnp 00:07: [io 0x0044-0x005f]
[ 0.268571] pnp 00:07: [io 0x0062-0x0063]
[ 0.268573] pnp 00:07: [io 0x0065-0x006f]
[ 0.268575] pnp 00:07: [io 0x0074-0x007f]
[ 0.268576] pnp 00:07: [io 0x0091-0x0093]
[ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269033] pnp 00:08: [io 0x0060]
[ 0.269034] pnp 00:08: [io 0x0064]
[ 0.269043] pnp 00:08: [irq 1]
[ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
[ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
[ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
[ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
[ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
[ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269930] pnp: PnP ACPI: found 10 devices
[ 0.269994] ACPI: ACPI bus type pnp unregistered
[ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307175] pci 0000:00:02.0: setting latency timer to 64
[ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
[ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
[ 0.307274] NET: Registered protocol family 2
[ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.308719] TCP reno registered
[ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.309050] NET: Registered protocol family 1
[ 0.426742] pci 0000:01:00.0: Boot video device
[ 0.426749] PCI: CLS 64 bytes, default 64
[ 0.426800] Unpacking initramfs...
[ 0.460291] Freeing initrd memory: 2140k freed
[ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 0.461707] apm: disabled - APM is not SMP safe.
[ 0.461884] audit: initializing netlink socket (disabled)
[ 0.461957] type=2000 audit(1312207987.459:1): initialized
[ 0.462290] highmem bounce pool size: 64 pages
[ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.464180] VFS: Disk quotas dquot_6.5.2
[ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.464469] msgmni has been set to 1712
[ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.464841] io scheduler noop registered
[ 0.464907] io scheduler deadline registered
[ 0.464983] io scheduler cfq registered (default)
[ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.465393] ERST: Table is not found!
[ 0.465467] isapnp: Scanning for PnP cards...
[ 0.822554] isapnp: No Plug & Play device found
[ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.050792] mousedev: PS/2 mouse device common for all mice
[ 1.050892] rtc_cmos 00:04: RTC can wake from S4
[ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.076954] cpuidle: using governor ladder
[ 1.077018] cpuidle: using governor menu
[ 1.077281] TCP cubic registered
[ 1.077345] NET: Registered protocol family 17
[ 1.077415] Registering the dns_resolver key type
[ 1.077492] Using IPI No-Shortcut mode
[ 1.077626] PM: Hibernation image not present or could not be loaded.
[ 1.077633] registered taskstats version 1
[ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
[ 1.078086] Initializing network drop monitor service
[ 1.078222] Freeing unused kernel memory: 512k freed
[ 1.078587] Write protecting the kernel text: 3380k
[ 1.078672] Write protecting the kernel read-only data: 1028k
[ 1.088713] udevd[47]: starting version 171
[ 1.180160] SCSI subsystem initialized
[ 1.197209] usbcore: registered new interface driver usbfs
[ 1.197412] usbcore: registered new interface driver hub
[ 1.197625] usbcore: registered new device driver usb
[ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
[ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.237087] libata version 3.00 loaded.
[ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.240292] hub 1-0:1.0: USB hub found
[ 1.240359] hub 1-0:1.0: 10 ports detected
[ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.241613] scsi0 : pata_atiixp
[ 1.241804] scsi1 : pata_atiixp
[ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.307508] hub 2-0:1.0: USB hub found
[ 1.307579] hub 2-0:1.0: 2 ports detected
[ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 1.384201] hub 3-0:1.0: USB hub found
[ 1.384274] hub 3-0:1.0: 2 ports detected
[ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 1.460849] hub 4-0:1.0: USB hub found
[ 1.460923] hub 4-0:1.0: 2 ports detected
[ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.537463] hub 5-0:1.0: USB hub found
[ 1.537533] hub 5-0:1.0: 2 ports detected
[ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.610820] hub 6-0:1.0: USB hub found
[ 1.610890] hub 6-0:1.0: 2 ports detected
[ 1.611025] ahci 0000:00:12.0: version 3.0
[ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.612922] scsi2 : ahci
[ 1.613831] scsi3 : ahci
[ 1.614815] scsi4 : ahci
[ 1.614997] scsi5 : ahci
[ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
[ 2.106684] ata3: softreset failed (device not ready)
[ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.106831] ata4: softreset failed (device not ready)
[ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
[ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.279701] ata4.00: configured for UDMA/100
[ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.284533] ata3.00: configured for UDMA/133
[ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
[ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
[ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
[ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
[ 2.411669] usbcore: registered new interface driver usbhid
[ 2.411745] usbhid: USB HID core driver
[ 2.437927] sda: sda1 sda2 sda3 < sda5 >
[ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.003984] udevd[255]: starting version 171
[ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.140858] ACPI: Power Button [PWRB]
[ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.141058] ACPI: Power Button [PWRF]
[ 4.154881] Linux agpgart interface v0.103
[ 4.157785] ACPI: Fan [FAN] (on)
[ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.161972] ACPI: acpi_idle registered with cpuidle
[ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.228336] sky2: driver version 1.28
[ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
[ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
[ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
[ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
[ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
[ 4.357033] ACPI: Invalid passive threshold
[ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
[ 4.476360] Disabling lock debugging due to kernel taint
[ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
[ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.775620] hda_codec: ALC888: BIOS auto-probing.
[ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
[ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
Last edited by Fuentes (2011-08-16 22:44:13)the contents of /home/user/.xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
No outputs have backlight property
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
Object::connect: No such signal QDBusAbstractInterface::Changed()
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00141
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x8bf31cc
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00141
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00143
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00143
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00145
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00145
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00147
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00147
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e00149
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e00149
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014b
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014b
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014d
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014d
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e0014f
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 152 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e0014f
Object::connect: No such signal QDBusAbstractInterface::Changed()
Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kwin(977): Compositing is not possible
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
QProcess: Destroyed while process is still running.
plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kglobalaccel: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
ksmserver: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kded4: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit. -
[SOLVED]Asus UX32VD, problems with ACPI and Intel video driver
1. The bigger problem seems to be Intel video driver:
When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset". From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
Intel driver version: xf86-video-intel 2.20.1-3
2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
[ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
[ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
[ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
[ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
[ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
[ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
[ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
[ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
[ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
[ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
[ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
[ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
[ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
[ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
[ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
[ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
[ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
[ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
[ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
[ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
[ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
[ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
[ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
[ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
[ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
[ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
[ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
[ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
[ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
[ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
[ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
[ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
[ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
[ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
[ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
[ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
[ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
[ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
[ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
[ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
[ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
[ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
[ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
[ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
[ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
[ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
[ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
[ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
[ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
[ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
[ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
[ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
[ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
[ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
[ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
[ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
[ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
[ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
[ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
[ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
[ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
[ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
[ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
[ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
[ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
[ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
[ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
[ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
[ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
[ 0.000000] 0000000000 - 00cb000000 page 2M
[ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
[ 0.000000] 0100000000 - 012f200000 page 2M
[ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
[ 0.000000] RAMDISK: 37a46000 - 37d1b000
[ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
[ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000012f200000
[ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
[ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0012f200
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000c97be
[ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
[ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
[ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
[ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
[ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
[ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
[ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
[ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
[ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
[ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
[ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
[ 0.000000] 0: 0x000ca01e -> 0x000ca032
[ 0.000000] 0: 0x000ca033 -> 0x000ca045
[ 0.000000] 0: 0x000ca06b -> 0x000ca07f
[ 0.000000] 0: 0x000ca080 -> 0x000ca081
[ 0.000000] 0: 0x000ca083 -> 0x000ca084
[ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
[ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
[ 0.000000] 0: 0x000ca90e -> 0x000cad1d
[ 0.000000] 0: 0x000caff4 -> 0x000cb000
[ 0.000000] 0: 0x00100000 -> 0x0012f200
[ 0.000000] On node 0 totalpages: 1019347
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 11 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
[ 0.000000] Normal zone: 3016 pages used for memmap
[ 0.000000] Normal zone: 190008 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
[ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
[ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
[ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
[ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
[ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
[ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
[ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
[ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
[ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
[ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
[ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
[ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
[ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
[ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
[ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
[ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
[ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
[ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
[ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
[ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
[ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
[ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
[ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
[ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1696.208 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
[ 0.000032] 00cbc00000 - 00cfe00000 page 2M
[ 0.151118] Security Framework initialized
[ 0.151124] AppArmor: AppArmor disabled by boot time parameter
[ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.153673] Mount-cache hash table entries: 256
[ 0.153885] Initializing cgroup subsys cpuacct
[ 0.153888] Initializing cgroup subsys memory
[ 0.153897] Initializing cgroup subsys devices
[ 0.153899] Initializing cgroup subsys freezer
[ 0.153901] Initializing cgroup subsys net_cls
[ 0.153903] Initializing cgroup subsys blkio
[ 0.153938] CPU: Physical Processor ID: 0
[ 0.153940] CPU: Processor Core ID: 0
[ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.154505] mce: CPU supports 7 MCE banks
[ 0.154520] CPU0: Thermal monitoring enabled (TM1)
[ 0.154528] using mwait in idle threads.
[ 0.155909] ACPI: Core revision 20120320
[ 0.173638] ftrace: allocating 17828 entries in 70 pages
[ 0.187014] DMAR: Host address width 36
[ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
[ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
[ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.187127] HPET id 0 under DRHD base 0xfed91000
[ 0.187335] Enabled IRQ remapping in x2apic mode
[ 0.187337] Enabling x2apic
[ 0.187339] Enabled x2apic
[ 0.187348] Switched APIC routing to cluster x2apic.
[ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
[ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.325337] ... version: 3
[ 0.325338] ... bit width: 48
[ 0.325340] ... generic registers: 4
[ 0.325342] ... value mask: 0000ffffffffffff
[ 0.325343] ... max period: 000000007fffffff
[ 0.325345] ... fixed-purpose events: 3
[ 0.325347] ... event mask: 000000070000000f
[ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.365318] Booting Node 0, Processors #1
[ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.391966] #2
[ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.418597] #3 Ok.
[ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.432363] Brought up 4 CPUs
[ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
[ 0.436881] devtmpfs: initialized
[ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
[ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
[ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
[ 0.439159] NET: Registered protocol family 16
[ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.439288] ACPI: bus type pci registered
[ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.488790] PCI: Using configuration type 1 for base access
[ 0.489423] bio: create slab <bio-0> at 0
[ 0.489488] ACPI: Added _OSI(Module Device)
[ 0.489490] ACPI: Added _OSI(Processor Device)
[ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
[ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.600414] ACPI: Dynamic OEM Table Load:
[ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.601622] ACPI: Dynamic OEM Table Load:
[ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.602615] ACPI: Dynamic OEM Table Load:
[ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.603483] ACPI: Interpreter enabled
[ 0.603488] ACPI: (supports S0 S3 S4 S5)
[ 0.603522] ACPI: Using IOAPIC for interrupt routing
[ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.709614] ACPI: No dock devices found.
[ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
[ 0.710683] PCI host bridge to bus 0000:00
[ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
[ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
[ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
[ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
[ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
[ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
[ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
[ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
[ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
[ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
[ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.475460] vgaarb: loaded
[ 1.475461] vgaarb: bridge control possible 0000:00:02.0
[ 1.475508] PCI: Using ACPI for IRQ routing
[ 1.477328] PCI: pci_cache_line_size set to 64 bytes
[ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
[ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
[ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
[ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
[ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
[ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
[ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
[ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
[ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
[ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
[ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
[ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
[ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
[ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
[ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
[ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
[ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
[ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
[ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
[ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
[ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
[ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
[ 1.477696] NetLabel: Initializing
[ 1.477698] NetLabel: domain hash size = 128
[ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.477713] NetLabel: unlabeled traffic allowed by default
[ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.479760] Switching to clocksource hpet
[ 1.485853] pnp: PnP ACPI init
[ 1.485869] ACPI: bus type pnp registered
[ 1.486219] pnp 00:00: [bus 00-3e]
[ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
[ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.533253] pnp 00:02: [io 0x0000-0x001f]
[ 1.533255] pnp 00:02: [io 0x0081-0x0091]
[ 1.533257] pnp 00:02: [io 0x0093-0x009f]
[ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
[ 1.533262] pnp 00:02: [dma 4]
[ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.533487] pnp 00:05: [io 0x002e-0x002f]
[ 1.533489] pnp 00:05: [io 0x004e-0x004f]
[ 1.533491] pnp 00:05: [io 0x0061]
[ 1.533493] pnp 00:05: [io 0x0063]
[ 1.533495] pnp 00:05: [io 0x0065]
[ 1.533497] pnp 00:05: [io 0x0067]
[ 1.533498] pnp 00:05: [io 0x0070]
[ 1.533500] pnp 00:05: [io 0x0080]
[ 1.533502] pnp 00:05: [io 0x0092]
[ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.533506] pnp 00:05: [io 0x0680-0x069f]
[ 1.533508] pnp 00:05: [io 0x0200-0x020f]
[ 1.533510] pnp 00:05: [io 0xffff]
[ 1.533512] pnp 00:05: [io 0xffff]
[ 1.533514] pnp 00:05: [io 0x0400-0x0453]
[ 1.533518] pnp 00:05: [io 0x0458-0x047f]
[ 1.533520] pnp 00:05: [io 0x0500-0x057f]
[ 1.533522] pnp 00:05: [io 0x164e-0x164f]
[ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
[ 1.533579] system 00:05: [io 0xffff] has been reserved
[ 1.533581] system 00:05: [io 0xffff] has been reserved
[ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.533606] pnp 00:06: [io 0x0070-0x0077]
[ 1.533620] pnp 00:06: [irq 8]
[ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.533685] pnp 00:07: [io 0x0454-0x0457]
[ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.533764] pnp 00:08: [io 0x0010-0x001f]
[ 1.533767] pnp 00:08: [io 0x0022-0x003f]
[ 1.533769] pnp 00:08: [io 0x0044-0x005f]
[ 1.533771] pnp 00:08: [io 0x0072-0x007f]
[ 1.533773] pnp 00:08: [io 0x0080]
[ 1.533774] pnp 00:08: [io 0x0084-0x0086]
[ 1.533776] pnp 00:08: [io 0x0088]
[ 1.533778] pnp 00:08: [io 0x008c-0x008e]
[ 1.533780] pnp 00:08: [io 0x0090-0x009f]
[ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
[ 1.533858] pnp 00:09: [irq 13]
[ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.533945] pnp 00:0a: [irq 12]
[ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 1.534008] pnp 00:0b: [io 0x0060]
[ 1.534010] pnp 00:0b: [io 0x0064]
[ 1.534017] pnp 00:0b: [irq 1]
[ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
[ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
[ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
[ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
[ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
[ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
[ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
[ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.534823] pnp: PnP ACPI: found 15 devices
[ 1.534824] ACPI: ACPI bus type pnp unregistered
[ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
[ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
[ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 1.541791] NET: Registered protocol family 2
[ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.544346] TCP: reno registered
[ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.544464] NET: Registered protocol family 1
[ 1.544482] pci 0000:00:02.0: Boot video device
[ 1.579823] PCI: CLS 64 bytes, default 64
[ 1.579868] Unpacking initramfs...
[ 1.651952] Freeing initrd memory: 2900k freed
[ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
[ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
[ 1.652909] audit: initializing netlink socket (disabled)
[ 1.652920] type=2000 audit(1343310419.543:1): initialized
[ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.655215] VFS: Disk quotas dquot_6.5.2
[ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.655387] msgmni has been set to 7683
[ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.655616] io scheduler noop registered
[ 1.655619] io scheduler deadline registered
[ 1.655674] io scheduler cfq registered (default)
[ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 1.656047] efifb: probing for efifb
[ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
[ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.658532] efifb: scrolling: redraw
[ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.661755] Console: switching to colour frame buffer device 128x48
[ 1.664865] fb0: EFI VGA frame buffer device
[ 1.664872] intel_idle: does not run on family 6 model 58
[ 1.664905] GHES: HEST is not enabled!
[ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.665554] Linux agpgart interface v0.103
[ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
[ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.668518] mousedev: PS/2 mouse device common for all mice
[ 1.668581] rtc_cmos 00:06: RTC can wake from S4
[ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.668766] cpuidle: using governor ladder
[ 1.668768] cpuidle: using governor menu
[ 1.668897] TCP: cubic registered
[ 1.669011] NET: Registered protocol family 10
[ 1.669206] NET: Registered protocol family 17
[ 1.669210] Registering the dns_resolver key type
[ 1.669345] PM: Hibernation image not present or could not be loaded.
[ 1.669352] registered taskstats version 1
[ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
[ 1.670074] Initializing network drop monitor service
[ 1.671692] Freeing unused kernel memory: 740k freed
[ 1.671810] Write protecting the kernel read-only data: 8192k
[ 1.677537] Freeing unused kernel memory: 1588k freed
[ 1.680114] Freeing unused kernel memory: 640k freed
[ 1.688393] systemd-udevd[48]: starting version 186
[ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.729878] usbcore: registered new interface driver usbfs
[ 1.729905] usbcore: registered new interface driver hub
[ 1.729967] usbcore: registered new device driver usb
[ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.733581] SCSI subsystem initialized
[ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
[ 1.735298] libata version 3.00 loaded.
[ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.743591] hub 1-0:1.0: USB hub found
[ 1.743601] hub 1-0:1.0: 2 ports detected
[ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
[ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.756431] hub 2-0:1.0: USB hub found
[ 1.756436] hub 2-0:1.0: 2 ports detected
[ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
[ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 1.757594] xHCI xhci_add_endpoint called for root hub
[ 1.757598] xHCI xhci_check_bandwidth called for root hub
[ 1.757646] hub 3-0:1.0: USB hub found
[ 1.757657] hub 3-0:1.0: 4 ports detected
[ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.757848] xHCI xhci_add_endpoint called for root hub
[ 1.757851] xHCI xhci_check_bandwidth called for root hub
[ 1.757894] hub 4-0:1.0: USB hub found
[ 1.757905] hub 4-0:1.0: 4 ports detected
[ 1.759643] ahci 0000:00:1f.2: version 3.0
[ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.766833] scsi0 : ahci
[ 1.766937] scsi1 : ahci
[ 1.767022] scsi2 : ahci
[ 1.767101] scsi3 : ahci
[ 1.767184] scsi4 : ahci
[ 1.767262] scsi5 : ahci
[ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
[ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
[ 1.767505] ata3: DUMMY
[ 1.767507] ata4: DUMMY
[ 1.767508] ata5: DUMMY
[ 1.767510] ata6: DUMMY
[ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
[ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.087320] ata2.00: configured for UDMA/133
[ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.087920] ata1.00: configured for UDMA/133
[ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
[ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
[ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
[ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.095497] sda: sda1 sda2
[ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.096681] sdb: sdb1 sdb2 sdb3
[ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.173153] hub 1-1:1.0: USB hub found
[ 2.173332] hub 1-1:1.0: 6 ports detected
[ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.415509] systemd-udevd[144]: starting version 186
[ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.465658] [drm] Initialized drm 1.1.0 20060810
[ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.482290] ACPI: Lid Switch [LID]
[ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.483119] ACPI: Power Button [PWRB]
[ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.484548] ACPI: Sleep Button [SLPB]
[ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.494298] ACPI: Requesting acpi_cpufreq
[ 2.507995] i915 0000:00:02.0: setting latency timer to 64
[ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
[ 2.530047] ACPI: AC Adapter [AC0] (on-line)
[ 2.532019] Monitor-Mwait will be used to enter C-1 state
[ 2.532089] Monitor-Mwait will be used to enter C-2 state
[ 2.532122] ACPI: acpi_idle registered with cpuidle
[ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
[ 2.561573] wmi: Mapper loaded
[ 2.564667] iTCO_vendor_support: vendor-support=0
[ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
[ 2.587955] MXM: GUID detected in BIOS
[ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
[ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M" as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
gnome-session[1269]: DEBUG(+): Enabling debugging
gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
gnome-session[1269]: DEBUG(+): fill: *** Adding required components
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
gnome-session[1269]: DEBUG(+): uid = 120
gnome-session[1269]: DEBUG(+): pid = 1360
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
gnome-session[1269]: DEBUG(+): uid = 120
gnome-session[1269]: DEBUG(+): pid = 1279
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
gnome-session[1269]: DEBUG(+): Got callback for signal 15
gnome-session[1269]: DEBUG(+): GsmManager: Logout called
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
gnome-session[1269]: DEBUG(+): Unreffing manager
gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
(gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
PolicyKit daemon disconnected from the bus.
We are no longer a registered authentication agent.
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0.
Maybe you are looking for
-
Storing user defaults of Web Dynpro application on portal
Hi folks, I am trying to develop Web Dynpro application that runs in an iView on a portal. I would like to remember certain user defaults for this application (e.g., user default plant). User also has control over this value, so whenever they change
-
I need to compile a code in dev c++ how can I do it on my mac?
I need to compile a code in dev c++ how can I do it on my mac?
-
Hi Guys, I am ABAP Consultant, I dont have much idea on XI but now have some part of development. My requirement is <b>XI gives the sales order</b> information to <b>SAP system</b>. SAP is responsible for creating the sales order and error handling a
-
Problem in modifying the existing record in table control
Hi Experts, I have one table control.I have entered one record and save it.When I am modifying the same record a duplicate record is created.I need if I modify the same record that record should only modify.How to delete the duplicate record.
-
Exiting a Web Dynpro ABAP Application: WDOEXIT USR_ABORT
We need to run some code when a Web Dynpro application is closed. The window has a WDOEXIT method which seems to never be called. What is this for then? When our application runs in the portal a USR_ABORT command (sap-sessioncmd) is sent. Is this cat