Irrelevant message after attempt to delete Master Data.

Hi friends, i got one unwanted attribute existed in the master data and when iam trying to delete this it's giving one msg callede -->Table /BIC/YZXX2 does not exist.
And also i applied the note 1110324 Irrelevant message after attempt to delete Master Data.
Any one has faced this problem, pls suggest me ....how to over come this.
Thanks in advance,
Sruthi.

Hi ,
Create the Table /BIC/YZXX2  in SE16 T.code
And the try to remove the Attr from master data Info Object.
this is perfect
Assigning the Points is the way to say thanks in SDN
Regards
Hari

Similar Messages

  • 'Error occurred when deleting master data (RSDMD118)'

    Helo Gurus,
    When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
    We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.

    Hi Mathew,
    Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
    You can also try transaction SLG1 with:
       Object = RSDMD
       Subobject = MD_DEL
    and click on "Execute", this might give you the reason why data cannot be deleted.
    Regards,
    Csaba

  • Error while deleting master data (Message no. RSDMD118)

    Dear all,
    I am performing a test to create and delete new Company Codes in Consolidation Workbench.
    Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
    Error while deleting master data
    Message no. RSDMD118
    Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
    Appreciate assistance to troubleshoot and resolve this error.
    Thank you.

    Thank you both for your replies.
    I am sure those are not the case here as I deleted the Company immediately after creating it.
    Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
    Use of: Company UAT1 UAT Company 1
    Number of Uses Found: 0 
    However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

  • Deleting master data after loading transactional data using flat file

    Dear All,
    I have loaded transaction data  into an infocube using a flat file . While loading DTP i have checked the  option "load  transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
    While loading the flat file, I made a mistake for DIVISION Characteristic  where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
    But when I see the master data for DIVISION , i can see a new entry  with value '4000'.
    My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
    I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
    Please suggest me on this.
    Regards,
    Veera

    Hi,
    Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
    If this master data is not used any where else just delete the master data completely with SID option.
    If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
    Hope this helps
    Akhan.

  • HT1926 I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll.  error 7 (windows error 126)

    I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll.  error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Deleting Master Data

    Hi All,
    I am trying to delete master data in a process chain.
    But its not working , the chin is executing but the function module RSDMD_DEL_MASTER_DATA is retuning the message " No master Data was Deleted".
    Please suggest how to fix this.
    Appreciate help,
    Deepthi

    Hi Deepthi
      Before deleting the master data.have look at transaction data like any dependency  data is there r not.If the the trans action data is present then u can just delete that thing then only u have the option of deleting the master data in case of process chains.if any let me know.If my answer is useful dont for get to assign points.
    Best regards
    RK
    Assigning is the only way of saying thanx in SDN*****

  • Cannot delete Master Data on 0MATERIAL...

    "Cannot delete Master Data on 0MATERIAL...... some records still in use"
    Hi, I am facing an issue where I would like to delete ALL 0MATERIAL records and load them again but I am getting the above message.
    Would very much appreciate any feedback.
    thks,
    Alex

    Guys, thank you all.
    That went smooth.
    When I executed the SLG1 log it showed me was still data in some InfoProviders.
    SOLVED DOING
    a-  Deleting data from such infoproviders (from log).
    b- Trying again to delte 0MATERIAL data.
    c- Error again.
    d- SLG1
    e- Identify form SLG1
    a- delete content from Cube/DSO/Object...
    b- trying again to delete 0MATERIAL...
    Until all data got deleted and I was allowed to delete 0MATERIAL data.
    First, delete the master data from the places where it is still being used (for example, in InfoCubes, as an attribute, in a hierarchy). Refer to the application log: Transaction slg1, object RSDMD, sub-object MD_DEL. The application log contains a list showing you whether the master data has been deleted or if it is still in use, and if so where it is being used. The list is complete only when you confirm that you want to delete all the master data that is in use.
    (Which I think Srinivas mentioned already)
    QUESTION: I though when we delete Request we delete data from Cube (or DSO...) though as per SLG1 log was showing some cubes contained data.
    Has this to to with E and F table ?
    thks

  • DELETING Master Data from 0Material

    Guys I am trying to Delete Data from 0Material, but when I run the FM RSATREE_PSA_DELETE_BATCH and check on T-Code 'slg1' it says the following,
    <b>"Master data 070-310-0 (SID 652) is used in ZCONSIGNED_INVENTORY_BYMONTH and, therefore, not deleted."</b>
    I have never come across where a query will be blocking data. The only thing that comes to mind is that it could be restricted by the data from the cube, and that is making it block the data.
    Having said that, when I try to open the query , it is all greyed out. And I have also tried deleting the query by T-code "rszdelete", but it comes back with the following message
    "Query object EU3SUSBZ4KR0Z75SUZRNBDSX0 is blocked. Deletion has been cancelled."
    any ideas!!!

    Hi,
    no you just can't "clear" these table unless you want to screw your datawarehouse....
    the first message means that the material with SID 7 is used in a hierachy of 0MATERIAL ==> adjust the hierarchy first.
    the second message indicates that the material with SID 5316 is used in the ICube 0RT_C07 and you CANNOT delete master data if it is used in other objects.
    First run RSRV for this dimension in order to see if the DIMID is really used by the fact table. Perform the following test "Entries Not Used in the Dimension of an InfoCube " with your cube and dim.
    if the DIMID is not used then "correct" the error; you'll then be able to delete your SID.
    If the DIMID is used then you'll have to delete your cube data if you really want to delete this material; otherwise you'll have to keep it.
    Finally rerun you master data deletion.
    hope this helps...
    Olivier.
    Edited by: Olivier Cora on Jul 31, 2008 9:07 AM

  • It's failed to try to delete master data

    Hi folks,
    I'm on BI 7.0
    When I try to delete master data of infoobject ZCCPT_S, it's failed,
    The error message is shown below:
    System error: RSDU_UTIL_ORA/FORM TRUNCATE_TABLE 54 /BIC/SZCCPT_S
    Message no. DBMAN100
    Diagnosis
    A system error with the following parameters has occurred in the data manager:
    Parameter 1 = RSDU_UTIL_ORA/FORM TRUNCATE_TABLE
    Parameter 2 = 54
    Parameter 3 = /BIC/SZCCPT_S
    Parameter 4 =
    Anyone can help me to solve the problem?
    Or do I have to delete this infoobject and recreate it, then transport to PRD system?
    Thanks in advance
    Ji xiaodong

    Hi,
    infoobject ZCCPT_S is used in any infooprovider (DSO or Cube), first delete the data in that and then try to delete master data for this infoobject, there is error deleting infoobjects SID's. i think that is why this error is coming. so first delete the data in infoproviders.
    go to infoobject ZCCPT_S -> using where used list see where it is used .
    Regards
    Daya Sagar

  • Deleting Master Data---Urgent

    Hai Experts,
    I am trying to delete the master data
    it is having hirarchey and text
    and i want to delete the data in the infoobject
    'but it is telling no master data has deleted
    i checked the dependents i want to delete in text so i checked i hirarchey also
    But it is not making me delete
    Thanks in advance.
    Regards.
    Vikram

    Hi Vikram,
    Try this way.
    Goto SE11 > Give the Table name /BIC/PXXXX  or  /BIC/HXXXX > Display
    From the menu option Utilities > Data base Utility > Delete DB Table.
    After that click on Activate and Adjust DB.
                                            OR
    Right click on the Info Object > Delete Master Data
                                                OR
    In the Manage Screen Delete the Contents.
    Assign points if it is helpful.

  • Delete Master Data - with or without sids

    Hi
    i am working on 0customer_attr
    now when i right click and see master data it has 100 records
    the same in r3 has 85 records.
    so i thought i will try to delete master data and then load again.
    so i right cick on 0customer and choose Delete master data.
    now if i go back and see data for 0customer it still exists.
    q1. what is the approach to delete and reload master data so between r3 and bw synchronization exists ???
    q2. should i select with SIDS or without SIDS ???
    how to rectify this error.
    thank

    Hi,
    Q1..how can i find which transaction data is using those records ?
    Doubleclick on the Master data IO. In the right pane you will find "Where-Used List" option. Click on that. It will give you the entire list of BW objects(DSO, Cube etc) in which your Master data IO is used.
    q2. How can i delete transaction data
    Right click on the Data targets(DSO, Cube etc) in which your master data IO is used, select the option Delete Data.
    (or) Right click on the Data targets(DSO, Cube)>Manage>Select the Request-->Delete
    q3. i dont see anything in psa,, it is master data so is that why there is no psa ??
    Though it is a Master data, you should have loaded the data via DS so PSA will be there. It is possible that you might have deleted the PSA data.
    Do one thing, delete all the Transactional Data(follow Q2 ans), then delete Master Data contents. Then do the loading again.
    Hope it helps!
    Regards,
    Pavan

  • My system software has crashed, and I am hoping to use an apple certified data recovery specialist in Atlanta. Who can I use and still have my warranty coverage after attempting to recover the data?

    My system software has crashed, and I am hoping to use an apple certified data recovery specialist in Atlanta. Who can I use and still have my warranty coverage after attempting to recover the data?

    Contact the nearest Apple store for a definitive answer.  We are users like you and cannot provide you with an accurate answer.
    Ciao.

  • Deleting master data in a process chain via ABAP "RSDMD_DEL_BACKGROUND" ?

    I need to delete master data attributes in a process chain.
    Since there seems to be no predefined process type for this, I looked for an existing ABAP in the dictionary and found the ABAP report "RSDMD_DEL_BACKGROUND". I plan to call this ABAP in an ABAP-process-step in my process chain.
    Unfortunately, I'm not shure how to set the input parameters:
    report rsdmd_del_background .
    type-pools: rsd, rrsi, rsenq.
    parameters: p_iobjnm like rsdiobj-iobjnm obligatory,
                p_chabnm type rsd_s_cha_bas-chabasnm obligatory,
                p_delsid type rs_bool default 'X',
                p_deltxt type rs_bool,
                p_obj    like balhdri-object,
                p_sub    like balhdri-subobject,
                p_ext    like balhdri-extnumber,
                p_noprot type rs_bool.
    Can anybody help me, with the settings needed or point out another way to achieve the deletion of master data attributes in a process chain?
    Thanks in advance, Frank.

    Hi Frank,
    as I already suggested in a previous thread, try to look at the FM 'RSDMD_DEL_MASTER_DATA'(in the pgm LRSDMDU12)...but pay attention to the other elements that the system certainly checks in order to complete this type of process !
    Hope it helps.
    Bye,
    Roberto

  • How to delete master data via process chain

    Hi All,
    I have to delete master data before loading it again via a process chain.
    In the process chain I chose the process " complete deletion of the data target content" but here I did not find infoobject as the data target option to delete the data.
    Please suggest how to solve this.
    Thanks,
    Harini

    Hi Harini,
    P_CHABNM - It is for the reference characteristic.
    I think if you dont have a ref characteristic then give the info-object name.
    This is what I fetched fom help.
    Reference characteristic
    The reference characteristic has the technical properties of a characteristic such as data type and length, as well as the master data (attributes, texts and hierarchies). The characteristic itself also has buinesses semantics.  Several characteristics can refer to the same reference  characteristic. Such characteristics automatically have the same technical properties and master data.
    Example:
    The characteristics sender cost center and receiver cost center use the reference characteristiccost center and with it the same values and the same texts.
    Bye
    Dinesh

  • Re: delete master data

    Hi All,
    How to delete master data. I tried delete master data from the context menu of infoobject.
    But it says some of master data not delted. I deleted all the transaction data exist for that master data.
    But still  i am not able to delete the master data.
    Pls provide me the solution.
    Regards,
    Anand

    1.Ideal way is right click and delete master data .
    2.Also you may right click > maintain master data->execute-->select all >click on delete icon>SAVE
    3.You may use func module SUBST_DELETE_TABLE_CONTENT.
    Kindly check  where used list of that infobject in transport connection , delete data from dependent infoproviders and then try deleting master data.
    Edited by: Neetika Sharma on Jun 22, 2010 9:43 AM

Maybe you are looking for