Irritating problem

ok i have windows 8 and i recently updated adobe flash player to version 14.0.0.145 now my youtube wont play certain videos i have opera and my moms computer also has opera and hers works perfectly fine but mine wont load the video at all it just fades all the quality options out except 240p and just sits there with the stupid little loading symbol and nothing else it never loads after that so whats the deal here why is it doing this if i disable the adobe plug in it plays the video but i dont like doing that whats the problem?

Hi
Simply select and highlight all tracks from the album, right click and go to "Get Info" and re-type the album name on all the tracks, but put an extra space in the title somewhere. The MAC wil then group all items together, as technically you have re-titled the album tracks as somethnig different!

Similar Messages

  • Irritating problem with Retina Display; dims/ flickers on and off and in weird pattern along bottom of screen

    I bought a 13-inch Retina MBP in late September 2014, just a few months ago and i am starting to have problems with the screen.
    First of all, the screen will sometimes fade and a weird pattern will appear at the bottom of the screen in which every second set of backlights is off and the other is on.  Here is a picture that i found on the internet; from a much older mac though but still shows the problem.
    The second problem, which is more irritating, is that every now and again the screen will sort of flicker where it will get darker then lighter and keep switching the brightness in a matter of seconds.  This is so hard to look at!!
    Hopefully there is an easy solution however i may have to take it to an Apple store and unfortunately get it replaced.
    Thanks.

    Howdy there chappo_10,
    It sounds like you have a couple of unexpected video issues on your 13 inch MacBook Pro. I'd like to recommend these troubleshooting steps specifically to hep you determine if you need to take it to the Apple Store:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC. 
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Irritating problem with Fluxbox and pressing Ctrl + F3

    I've used the Ctrl + F1, F2, F3 or F4 keys to switch between workspaces in Fluxbox but occasionally I'll press Ctrl + F3 and it will just log me out. This is highly annoying. Is there some way I can disable this functionality at all? I switch between workspaces regularly and it is highly annoying to have to reopen everything again after being logged out and it means I lose my train of thought with my work.
    Can anyone offer a solution to this problem at all? Thanks.
    Last edited by Cromulent (2012-11-30 22:58:50)

    It just happened again when I was using Spotify.
    I had the following apps open:
    Chromium - Workspace 1
    Thunderbird - Workspace 2
    KVirc - Workspace 3
    Spotify - Workspace 4
    When in Workspace 4 I pressed Ctrl + F3 as normal and it logged me out. So I logged back in and opened Spotify in Workspace 4 again and tried to get it to log out again and no matter what combination of keys and Workspace changes I did I couldn't get it to log me out again. I'm stumped.
    Edit: I think the problem is KVirc. Everytime I use it this happens. I'll see if it happens again without it running for a couple of days (it just happened when using the arrows on the tool bar as well so it has nothing to do with the key combination). It would be annoying if this was the case as I quite like KVirc as a my IRC client.
    Edit 2: Switched over to XChat. Will see if the problem persists.
    Last edited by Cromulent (2012-11-30 14:10:55)

  • Incredibly irritating problem

    I know I've asked about this before when someone with a similar problem posted a thread about it, but I got no help. Sorry to be posting again but it's driving me craaaazy.
    Since installing Itunes 8, every time I put a new album onto my Ipod, the last ten seconds of EACH song just cuts out - just goes to the next song. This does not happen on Itunes, only on my Ipod. However I'm 100% sure this has only started since installing itunes 8 and it definitely only occurs with albums added to my Ipod since then.
    I know I'm not the only person with this problem, can anyone PLEASEEEEE help? It's so annoying!

    I have a similar problem. Since I downloaded Iron Maiden's Powerslave album last night, I found that the last 10 seconds or so of "2 Minutes To Midnight" are the start of the song "Losfer Words(Big 'Orra)" If you start Losfer Words you will hear the ending of 2 Minutes, but if you start at 2 Minutes, you cant really tell that Losfer Words started. Neither song has the "part of a gapless album" box checked in the options screen. This hasn't happened with any other songs, but it is annoying.

  • An irritating problem with AirPort

    Hi,
    I've read a few forums addressing this issue but none of the proposed solutions have worked for me.
    I am currently running a MacBook Pro on Snow Leopard (10.6.4) and my internet connection has just died. I tried unplugging the router, turning on/off AirPort and rebooting, attempting to renew the DHCP lease, but the problem still remains - AirPort has self-assigned an IP address and I am unable to connect to the Internet.
    Does anyone know of a solution to this problem? I would greatly appreciate your help.
    MANY, MANY THANKS.

    OK, so I would check whether your computer works with your router when it is using the Ethernet connection, and I would check whether it works wirelessly at other wireless hotspot locations other than your home.
    If this were my problem, that would guide me in deciding whether it is a hardware problem with the wireless or maybe a configuration problem such as MAC authentication in the router preventing affiliation or incompatible wireless protocols.
    That new piece of information now confuses me about what exactly is your network topology. So are you running BootCamp on this computer and you can connect to the internet in the Windows boot camp partition but can't connect to the internet in the Apple partition? Or vice versa? Or none of the above? What is "excellent?" Full bars in the signal strength indicators? What computers/OSs are getting onto the internet for you, and what ones aren't?

  • Irritating problem with charts

    I am trying to use two columns of data to plot a simple scatter-plot. I select the left column, and then tap and drag the blue circle in the bottom right corner onto the right column. This always used to make Numbers plot one column against the other. However, recently it has taken to creating another series, both plotted against Untitled 1, Untitled 2, etc.
    What has happened and how can I fix it?

    Tentop wrote:
    …Any suggestion would be greatly appreciated.
    Suggestion:  provide sensible details. 
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Irritating problem with adding columns

    I am adding columns to jtable. And then moving it to required postion.
    But whenever I edit those columns all the newly added columns and the first column reflects those changes. ie whatever I enter in the new columns, it appears in all newly added columns and the first column as well.
    whats wrong I am doing here.
    EditableHeaderTableColumn ncol = new EditableHeaderTableColumn();
    TableColumnModel columns = table.getColumnModel();
    int c = table.getSelectedColumn();
    columns.addColumn(ncol);
    columns.moveColumn(i-1, c+1);

    Make sure you are not sharing the TableColumn instance or adding a TableColumn that already is in the TableColumnModel.
    When resizing the table column, do the others resize too. ?

  • Irritating graph problem

    I have an X-Y graph that holds several datasets and has a cursor, locked to
    datapoints, that the user can drag around to get information on different
    datapoints and different datasets. The user can opt to hide a dataset to
    make the display clearer. In this case, if the datapoint the cursor is
    pointing to disappears from the plot, the cursor goes to (0,0) and has to be
    manually brought back by the menu option "Bring cursor to centre", which is
    a builtin function of the X-Y plot.
    I want to remove this manual step and automatically bring the cursor back to
    the centre. This should have been trivial- I assumed the "Bring cursor to
    centre" would be a method of the X-Y graph object. Not so. So I then read
    the new X and Y axis ranges aft
    er removing the data and I set the cursor X
    and Y to the midpoint of these. This doesn't work unless a datapoint exists
    at the centre of the plot. So first, I unlock the cursor and move it to the
    centre- this is fine. If I manually change the cursor lock mode to "Lock to
    point" it automatically jumps to the closest datapoint- good. However if I
    do it programmatically, it jumps to (0,0). Not good.
    This is obviously an irritating problem. I'm on 6.0- I've not had the time
    to backup and install the latest update, though I've not heard of this in
    the discussed fixes.
    I don't particularly want to have to locate the closest visible datapoint to
    the centre and programmatically move the cursor there- it's bound to be much
    slower than the builtin function if only I can get at it!
    Anyone done this?

    Hmm. Updating my installation to 6.0.2 doesn't solve the crash. Bug report
    submitted. I've attached here a simple VI demonstrating the problem that,
    when run, results in a failure at line 2361 in "graphcrs.cpp". Be
    interesting to see if it's a widespread thing or just my machine.
    If anyone's interested and didn't see the preceding messages, this is in
    discussion of KnowledgeBase article #1FNFHJE7
    Craig Graham wrote in message
    news:[email protected]..
    > Ouch.
    >
    > This certainly seems the case, however on 6.0 those properties are uints,
    > and wiring a -1 int to them in the hope the cast will do something
    > meaningful causes Labview to crash (in "graphcrs.cpp") when that part of
    the
    > code is executed. Nas
    ty.
    [Attachment GraphCrashDemo.vi, see below]
    Attachments:
    GraphCrashDemo.vi ‏26 KB

  • I have a very big problem with my mac book pro. It continously looses the wifire connection. This happens every 5-10 minutes and is getting to be a very big irritation. I have tested my wifiresignal

    I have a very irritating problem with my MacBook Pro. It keeps loosing the wifi connection - every 5-1o minutes!!!
    I have testet the wifi signal and had my router checked - both are fine.
    Please tell me what I can do :-(
    John

    First you should check on another Wifi to see if it's your Lion machine.
    If it only occurs on your Wifi, then perhaps you have local interference and need to set the router on another channel far from others.
    You can install a free program called KisMAC that you set your Driver Preferences to Apple Airport Extreme Passive Mode, enter your Admin password and monitor your local Wifi signals, see if you cna pin point the cause of your interference or meddler.
    If your not running WPA2 with AES and a 12 plus random character/letter/number password for both Admin and Internet access use only then you should seriously consider doing so.
    http://www.tomshardware.com/reviews/wireless-security-hack,2981-10.html

  • Problems with N70

    Problems with N70
    Helo! its been six months now i purchased N70, im facing two irritating problems
    1: whenever i prees *100# (to check balance) my N70 RESTARTS
    2: i cannot switch on my cell if memory card is installed in the phone.
    So i wana now is this a common problem or m d only guy who is facing this?
    Plz reply
    thx in advance.

    hi there
    try this remove ur mmc and give a hard reset b pressing the following keys.*#7370#.
    please note :ALL DATA WILL BE LOST.
    and then format ur mmc using a mmc reader.this should solve the issue and check in the software version by pressing the following keys *#0000#.if it is older than 5.0737.3.0.1 then u can get it upgraded.cheers.
    tongue is too confused on what to speak

  • WiFi problem with iOS 7.0.3 and iPhone 5

    My iPhone 5 has been working flawlessly with iOS6. After updating it to iOS 7 I have an irritating problem with the WiFi connection at work. Everything is OK for some time, then the WiFi connection just stops working. There is a WiFi icon max signal strength icon but there's just no connection. There are usually no error messages. Safari would just spin the connectivity icon forever with nothing showing on the screen. Facebook won't load anything, etc. Unfortunately the phone won't fallback to cellular. I have to either reset it, or restart it. Sometimes just diabling-enabling WiFi works, sometimes not.
    I've read a lot about this problem, it seems to be very common on 4S, however it seems I am alone to have it on 5. I've tried all the suggested solution - reset my network settings, I have even reinstalled my iPhone as a new one and not from my iOS6 backup. It doesn't help.
    Note that the problem is not in our WiFi network since my iPad 3 works perfectly and has connectivity at the same time.
    Having in mind this is very widespread issue on iPhone 4S which is still not fixed even in version 7.0.3, I am kind of exhausted. I've been a loyal Apple fan but if this doesn't get fix in the next iOS 7 update, I'll probably look other brands finally. It's really such a shame!

    You are not alone i am having same issue on my i5 ios7.0.3  but apple is still not responding on the issue several sites and even apple discussion forum is filled with this issue no major fix or trick works as what apple says in its help. waiting for apple to respond on this isuue

  • I have a problem with mail autofilling info email addresses. Emails sent to me the from looks like this: Holiday in the United States email address . I have no idea what this Holiday in the United States is...How can I fix/change to my name?

    I have an irritating problem with mail autofilling info in email addresses. Emails sent to me the from looks like this: Holiday in the United States <my email address>. I have no idea what this Holiday in the United States is or how it got to be there...How can I fix/change to my name?
    I fixed the To: autofilling incorrectly by deleting my email address from the Previous Recipients List, but is there a way to stop that from coming up on emails that I receive?

    Have you checked your Mac address book? If your email is saved somewhere in your address book with the name "Holidays in the United States" it might be adding the name automatically in Mac Mail.
    Alternatively, try this:
    Delete an Email Address from Auto-Complete in Mac OS X Mail
    To remove an email address from the auto-complete list in Mac OS X Mail:
    Start typing the recipient's address or name in a new message.
    Select the desired address from the auto-complete list as if you'd compose an email to them.
    Click the small down arrow in the recipient.
    Select Remove from Previous Recipients List from the menu.
    You can also search for the unwanted address directly in the previous recipients list:
    Select Window | Previous Recipients from the menu in Mac OS X Mail.
    Highlight the address you want to remove.You can highlight multiple addresses by holding down the Command key.
    Click Remove from List.
    Source: About.com

  • Problems with the iPod Touch (sound)

    Hey,
    I was wondering (more like desperately hoping) someone can help me with my problem.
    I've had my iPod touch for almost 2 years now but lately I've been getting problems with the sound.
    When I bought the iPod, I bought some decent sennheiser plug-in earbuds too, because I find the one's delivered with the ipod pretty low quality.
    For over a year, I loved my ipod touch (it's my second one) but one day, for some unknown reason, my sound was at not even half of the usual volume.
    I've checked the settings but cannot find the problem, so I tested the ipod ears delivered with the ipod since they were new, same story (the left earbud was slightly louder than the right for some time but not too long, then they both gone quiet).
    I've checked on the internet before and someone said "try jailbraking your ipod, because that sometimes helps, so I did but no effect.
    So I set it back to fabric settings and went to a switch store, they listened and found it odd too so they send it in because it was still under guarantee.
    Now (today), I've gotten a completely new ipod touch 16 Gb. So, happy as I was, I went home to put my music on it, and what happens? The sound is slightly louder than the previous one but still WAY too quiet! If I'm on the bus, its no use listening to it because I cant understand the lyrics cause of the background noizes the bus makes... Its p*¨ssing me off bigtime that its still way too quiet, anyone got any ideas how to fix it?
    Please don't send useless reply's like get ya ears checked because Im in the army and they get checked regularly and they are perfectly fine!
    Maybe with someone knows some other program or app  that I can use so I can fix this very irritating problem?
    I have had 6 iPods before, from the first one that came out to the ipod touch 16 Gb, and its only with this one that Ive started having problems about a year ago.
    Plus my girlfriend has an ipod too (not a touch) and on her ipod, everything works fine, my earbuds included :s
    Please help!
    Thanks in advance!
    Toby

    Omg, I've put over 2 hours of work in it to reinstall other versions of itunes, ios n such to then find out that they DID NOT test my ipod and sennheiser earbuds that I gave in along with my busted itouch.... They told me they work fine... Now I took my girlfriends earbuds cause nothing worked, turned out they are both broken and now I need to go back to the store for new ones, dont think that the previous itouch wasnt busted then after all cause it was, tried with 10 different sets of earbuds
    anyway Im a happy man again with a decent itouch and good earbuds, that I can lend from me girlfriend...
    Thanks for the help anyway

  • Myriad iTunes sync issues - song cutoffs - artwork problems - yeech!

    Hi all,
    I’m running the latest version of iTunes on a (late 2013) Macbook Pro Retina laptop, and having several different flavors of syncing issues with my two devices –  a 16 gb iPhone 4S running iOS 7.1, and a 32 gb iPod Touch 3rd Gen running iOS 5.1.1.
    As best I can tell, some syncing issues such as one of the ones I am experiencing (songs chopped-off when transferred and attempted to playback from the device) have existed in some way, shape or form for nearly 10 years now, so I’m not expecting any grand revelations here - but just looking for some honest advice on how to resolve in the shortest amount of time & with the least pain considering I have a fairly large music library in terms of syncing time required.  That being said, below bulleted-out are my current issues / frustrations / thoughts on where the problems may lie.   I would appreciate any advice:
    Purchased iTunes songs (ripped MP3’s from CD’s that I own and tracks from other sources do not seem to have the problem…) play fine in iTunes on my laptop, but when transferred to either my iPhone or iPod, they will randomly (it’s not every track) be cutoff near the end of the song.  Sometimes the song will stop with 2 minutes remaining and go silent. Sometimes it will stop with 15 seconds remaining and go silent.  Sometimes it will stop somewhere in that time range and start the next track on the album while still displaying the info from the previous track.  The only solution I have found to this for purchased content thus far is to wipe everything out, and go back and download the tracks from the cloud.  I have somewhere in the neighborhood of 1000 tracks that fall into this category, so my options to download directly to the device an artist at a time are kind of time-consuming and cumbersome.  Would this have something to do with the file format of purchased tracks vs. ripped ones? I have a lot of older ripped material that was imported as MP3’s or MP3’s converted to M4A’s that never seems to have this problem.  The newer purchased files are mostly ACC’s which DO have the problem.   Also would this have anything to do with the fact that my library (including most of the purchased content) was recently moved over and imported to a new Macbook from a Windows backup?  Most of my iTunes library was Windows / PC for the majority of its existence for the past decade or so; we only recently switched back to Mac.
    Discrepancies between deleting material on a device vs. what iTunes recognizes when it is plugged back in:  The other day, being frustrated with the random song chopping, I deleted everything on my iPod Touch 3rd Gen by going into Settings, Options, General, and “Usage” and then “Edit” and selecting to wipe out everything in iTunes. The device appeared to do this, and I was showing 28 gb or so free out of 32 once it completed.  Great, right?  I proceeded the rest of that day to painstakingly download approx. 900 tracks from the cloud onto the device, hoping to correct the chopping issue.  It did this, and I still had roughly 10 gb free. Great, right?  Later that night when I plugged the iPod into my Macbook with the 30 pin to sync, iTunes on the laptop for some reason still recognized the songs which I thought I had deleted hours earlier and showed me multiple copies of everything.  For the ones that had been deleted, when I clicked to play them on the iPod through iTunes, I got the little gray exclamation point - ! – in a circle like when a track has moved libraries and cannot be found.  iTunes then told me my sync could not be completed due to being over capacity on the device by a ridiculous 12 gb or something like that. Huh?? I could have gone through and manually deleted the (by that point more than 1000) duplicate tracks and synced to have made room I suppose – but after accidentally hitting Autofill – iTunes threw up its hands and would not let me do anything further.  Any attempts at that point to delete either pending Autofill tracks or missing duplicate tracks just led to endless spinning on the “Preparing Update” notice on the device which led to me having to kill iTunes.  Can you say big-time frustration?  I eventually opted to restore the iPod to factory (iOS 5.1.1) settings and start over.  That device is currently at home slogging through the process of attempting to re-download 400 some songs from the cloud over wi-fi so that I can avoid the cutoff track problem.  The plan after that is to sync playlists for certain artists over top of the purchased tracks so that my ripped tracks can merge with them to round out the playlist. Do you see how this is beginning to become a marathon?  
    Last but not least - it seems to be just since the last few iTunes upgrades for Mac, but I’m having a huge problem suddenly with album artwork staying synced properly. After one recent manual transfer session (30 pin between the iPhone and the Macbook) roughly half of the tracks I transferred had mismatched artwork.  Doing this through the cloud (downloading tracks “Not on this iPhone” via the iTunes app) doesn’t seem to have the same problem, but of course this takes longer. Also, what is the deal with “Show All Music” in iOS 7 and playing tracks from the cloud?  This is a really cool feature that allows you to save a ton of disk space on your device, but I have found that when I do this that many tracks have mismatched artwork.  For example right now I’m listening to a Grateful Dead song that is displaying Genesis artwork.  Huh?? Artwork is less of a big deal than the track lengths being chopped off, but it’s still annoying.
    iTunes revolutionized the music industry and on the whole has been fantastic.  But it seems as if lately, little irritating problems like the syncing issues are becoming more and not less prevalent, and the problem is they aren't being dealt with.  I got my first Mac in college nearly 20 years ago now, and have been generally entrhalled with Apple products ever since.  But I have to say that this kind of junk lately is more what I would expect in the vein of problems from the shoddy-PC world that seem to linger and never get fixed.  Cupertino folks - what's the deal???

    You're not the only one judging by the forums!
    Likewise I have been using Apples since the Apple IIe(!) and have found them great in every respect. iTunes however over the past couple of years has deteriorated to th point of being unuseable. Apple has made iTunes the hub of your digital life and so it really has to work seemlessly.
    I currently have had to completely wipe and re-install my 64Gb iPhone 4s several times to get my music back on to it. I cannot het any playlists to sync which is really annoying and it generally undermines my faith in Apples software quality.
    Please put whatever resources are necessary to fix this soon Apple or you will certainly start to haemorrhage customers to other platforms. After all if iTunes remains broken then what's the point of paying the extra for Apple qulaity? You may as well uplaod ebverything to Google play and be done with it!

  • Scrubbing problems with external video turned on

    I recently upgraded to Tiger and using FCP vers 4.5. When my external video is on and viewing on my NTSC monitor, I have a very irritating problem. Whenever I use the keyboard to play in reverse or scrub by holding down the J and K keys at the same time for slow play, the image stutters and drops frames. Also, the Viewer or Canvas display will also periodically black out for a second or two. When I scrub with the mouse, I don't see this problem. It's only when using the keyboard.
    When I turn off external video, everything is fine. I've never had this problem in the past with my system. The only thing that's changed is Tiger and Quicktime 7 Pro. I have done all the upgrades and threw away all FCP preference files.
    I'm stumped. Anyone else having the same problem?
    By the way, video plays fine when in external video mode. Laid off a project last night, no issues or dropped frames.

    Oh my goodness I'm having the same problem! Recently I upgraded to Quicktime 7.0.3 but did some Security Updates as well and thought I was up the creek. I'm on FCP 4.5, OS X 10.3.9 and noticed the same backwards stuttering. Thank you so much for putting your solution on there, I will try it first thing when I get to work tomorrow!
    Jessica

Maybe you are looking for