Is 10g supported under the current version of OLE? (64bit)

Is 10g supported under the current version of OLE? (64bit) Can anyone point me to installation and repository info for doing the install?
Alternatively, what is the highest version of 64 bit OLE that does support 10g (10.2)?
Thanks
EB

Hi;
For your question quick answer is:
1. Check installation guide
2. Check certification matrix from metalink
3. Check below notes:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Master Note of Linux OS Requirements for Database Server [ID 851598.1]
The Oracle Validated RPM Package for Installation Prerequisities [ID 437743.1]
Master Note For Oracle Database Server Installation [ID 1156586.1]
Regard
Helios

Similar Messages

I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation polic

I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation policy that is assigned by the server activion. this is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request que this iphone be unlocked by your carrier. Please contact Apple for more information. "
I need help, I use my phone for everything enclusive to work. I appreciate if you can help. I'm from Brazil. My name and giullia.

Did you purchase this device from Apple or an authorized reseller? It sounds as if you had a device that was jailbroken/hacked to operate on your carrier. Upon updating the iOS, it is now locked back to the original carrier the device was locked to.
Only the carrier the device is locked to can authorize an unlock. You will need to make contact with that carrier and see if they provide unlocking services, and if they do, if you qualify for an unlock. Otherwise, you are out of luck. One that carrier can take care of the unlocking.

Problem viewing forms.This form is not supported with the current version of Adobe Reader.Upgrade to the latest version for full support. That does that mean exactly?

Problem viewing forms.This form is not supported with the current version of Adobe Reader.
Upgrade to the latest version for full support.
What exactly do I need to do?

That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
BTW PLEASE complete your profile. It's very difficult to help someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information.

"function is not supported by the current version of the backend server"

Hi,
I just updated SAP business one with latest 8.81 patch 10 and related integration component. However, when I try to add a sales order using new 1.5 version of the mobile app, it give the following error:
"Note that this function is not supported by the current version of the backend server".
Any idea what this means? Do I need to update the integration component with a different version?
Thanks

Hi Jose,
please refer to this SAP Note [1602674 - SAP Business One for iPhone and iPad - Troubleshooting Guide|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303136303236373426]
Note: you need to use your S-Account to access this note.
regards,
Fidel

I am using Dragon for Mac and it is not supported under the current Mac OS?

I have been using Dragon for Mac for some time. But it no longer works because Dragon for Mac is not supported on the new OS. How do I use Dragon for Mac on the current version?

I bought the Mac Dictate program Version 3 latest one out there at Best Buy. Bless their hearts they tried for 6 hours at no charge to me to make it work. They gave me my money back. It continued to crash.
This is what I learned in 6 hours.
In answer to your question it is not supported even on the OS X Version 10.9.1
Message read
Incompatible Software
The following software was found during upgrade and is incompatiblewith this version of OS X. It has been been moved to the incompatible with this version of OS X
It's a 50/50 chance it will work. I will tell you what my issues were
1.Even if you update your Mac's version it will not work
2.Nuance Mac Dictate staff patronize you and tell you it's Apples system fault, They don't return your phone calls.( I spoke to a Patrick who wanted me to send him a screen shot of the the crash then said,
To save an apple system profiler report
3.WAIT
I just discovered that of you go to System Preferances and check Use Enhanced Dictation . To start dictation press your fn function key twice and you are recording. OMG! I opened WORD into a blank page tried it and it works! Also It's free on Mac.

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

TS3230 i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?

i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?

You need to uninstall the Community / Conduit toolbar add-on.
Locate the files in bold print and move them to the Trash. The first five are in your root /Library
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/ScriptingAddtions (anything CTLoader realted)
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
The next one is in your Home folder.
~/Library/Application Support/Conduit
When you're done, try Safari.

How to fix The SIM card inserted in this iPhone does not appear to be supported. The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation

The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

Or if you've recently got the phone unlocked then you'll need to connect it to itunes and then do a fresh restore to unlock it ,although for most users simply connecting to itunes for few seconds did the trick.

TS2529 The SIM card inserted in this iPhone does not appear to be supported. The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation ser

The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information
what can in do?

Well unfortunatly that advice does not always work. I bought a unlocked iphone4 from apple several years ago and went to att on a no contract basis. Six months later the phone crashed while updating the operating system. Apple replaced the phone with a new one. All is fine till I got a iphone5 and gave te phone to my cousin. The phone is now locked to att but att says the IMEI number is not a valid ATT IMEI and therfore cant unlock it. Apple says there is nothing They can or are willing to do so now I am stuck for a 600.00 phone that can't be used.
If anyoun knows a way naround this situation mI would appreciate a heads up.

HT204053 The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert ano

sir have this error so what can i do The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

It looks like the iPhone is locked to a carrier that is not the one you are trying to use.
You need to determine which carrier it is locked to and then contact them to see if they are willing to authorise the unlocking of your iPhone. As ManSinha mentioned, many carriers will only authorised the unlock if requested by the customer who had the contract with them for this iPhone.
Remember that only the carrier who owns the lock on your Iphone can authorise Apple to unlock the iPhone in their servers. You need to contact the carrier or have the previous owner of the iPhone request the unlocking.

HT1937 the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another

the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another SIM card from supported carrier or request that this iPhone be unlocked by your carrier.

Similar issue
here is the description
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!!

We sent you three weeks ago add-on ImageExchange 2.9.4 and it still did not pass "fully reviewed" is there a reason? The current version do not support FF 18

We sent you three weeks ago add-on ImageExchange 2.9.4 and it still did not pass "fully reviewed" is there a reason?
The current version do not support FF 18 so the issue is urgent
Thanks
Eyal Shaked - Picscout

I talked to the Addons people, and apparently your add-on was rejected several weeks ago. They said to read the email you received from them for those reasons. I'm locking this thread as this is a Firefox support forum, not an extension dev support site.

Why can't someone from apple answer my question about upgrading to the current version of Itunes

I am amazed that I have been posting questions for months about this issue and no one has given me an answer!!!! Does Apple not track these discussions?
I have Windows 7 64-bit and am trying to upgrade Itunes to the current version, with no suggestions.
I have found and tried the 64-bit installer and receive the following message:
'This itunes installed is intended for 32-bit versions of Windows. Please download and install 64-bit Itunes installer instead.'
I have itunes 9.1.1.12 currently installed.

Okay ... it's behaving just like the PC Mover thing. 32-bit versions of iTunes and AMDS have somehow been jammed on the PC. When you go to uninstall either of them, the 64-bit Windows installer service encounters 32-bit installation configuration information, goes into a fantod, and you get the error message.
So we'd better try clearing away that installation configuration information, and then trying another update.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
Next, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Troubleshoot: when I try to update my Iphone 4 (ios 4.3.3) to the latest ios via itunes. It gives me a message "This version of iTunes (10.6.3) is the current version." Why?

Hello - I am trying to update my Iphone 4 from its current Ios (4.3.3) to the latest Ios (7.x.x?). I currently do not sync using icloud, and have only started syncing to my itunes today.
So far, I have backed up my Iphone using Itunes, transferred all my purchases using Itunes, and imported all my photos using Iphoto.
Then clicked on my Iphone in the left hand Column and in the screen that appeared found the "Update" button. Next to the update button read "A newer version of the iPhone software is available (version7.0). To update your iPhone with the latest software, click Update."
I then clicked the "Update" button and a pop-up message reading "This version of iTunes (10.6.3) is the current version." appeared.
Please advise why this happened, and how I should go about restoring and updating this Iphone.
After updating to the latest IOS, my next step will be to sign up for iCloud.
Thanks clever mac folk!

Hello hsielglad,
Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7. If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/HT5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M.

I have updated to Firefox 8.01, and confirmed that this is the current version. However, both Google and Firefox do not recognize my current verision -- these sites indicate my version is 3.5.7. Why?

I have updated (more than once) to Firefox Version 8.01. When I check Firefox Help:About, it confirms the version number and indicates that this is the current version. On Google, however, when I try to use G-Mail or +Google, gives me a message that my version of Firefox is no longer supported (and provides a link to download the current version). Additionally, Firefox itself, when I tried to use the Help:Submit Feedback menu option, indicates that I cannot use that option until I have first upgraded to the current version. Apparently, although I have upgraded, there is some marker or indicator that has not been updated from a previous version to indicate to websites which version of this browser is running on my machine. I would like to get this resolved, as it is keeping me from doing a few things I would like to do. By the way, I just looked at the dialog box below, following the comment "we've made some educated guesses about your current browser ..." it, too, indicates that my current version is 3.5.7.

You have a <b>general.useragent.override</b> pref that identifies you as Firefox/3.5.7
*Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729)
See:
*https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

Is 10g supported under the current version of OLE? (64bit)

Similar Messages

Maybe you are looking for