Is 160g classic manual the same as 120g?

I have a new 120G Classic. I've been searching for a manual for it. I used a link I found here, and was able to see a manual for the 160G, but nothing showed for a 120G. Please advise.

Hello there,
This should be what you are looking for.
http://manuals.info.apple.com/enUS/iPod_classic_120GBen.pdf
B-rock

Similar Messages

  • How do I get the volume on my ipod classic to the same level for all songs?  Some are louder than others.

    How do I get the volume on my ipod classic to the same level for all songs?  Some songs are a lot lower than others.

    Coverflow in iTunes is sorted by Album Artist whereas coverflow on the iPod classic is sorted by Artist. Unfortunately, there is no way to set this on your iPod. This is such a fumble on Apple's part that I'm beginning to think they're becoming another Microsloth with buggy firmware and products.

  • Importing CDs to iTunes in Mountain Lion:  iTunes is giving all Classical Albums the same title???

    We have started importing our hundreds of CDs into iTunes.  Problem is, iTunes is giving every Classical CD the same title, copying the title of the first Clasical CD we imported.  Any suggestions?

    Hey there,
    Since, the CD is a greatest hits CD, the first thing you may or may not want to do is check to see if it marked as part of a compilation. To do this, highlight each track of the album (or one at a time if you prefer ) and control->click and choose Get Info from the menu.
    When the window pops up, head over to the Info tab and make sure there is no check mark next to "part of a compilation." Then hit OK when you are finished, if you have made any changes.
    If that is not the case, I would retype the name of the album in for all 14 tracks at once and see if that helps.
    Lastly, if still no luck, I would check out this comprehensive post from turingtest2 on grouping albums together. Hope this helps.
    http://discussions.apple.com/message.jspa?messageID=8962455#8962455
    B-rock

  • I've got a problem:  if i want to back up my device manual (the same thing if it should does automaticly by charging) there's an error called: "the last backup couldn't be constructed"(don't know if it's right written, i'm german).Does sb. know what do?

    i've got a problem:  if i want to back up my device manual (the same thing if it should does automaticly by charging) there's an error called: "the last backup couldn't be constructed"(don't know if it's right written, i'm german).Does sb. know what to do? Help would be nice!!
    Henrik

    Sorry its Thanksgiving holiday here, here is a picture of the hard drive.
    After doing this, try the other suggestions if needed. then let us know!
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****
    Attachments:
    toshiba hard drive.jpg ‏14 KB

  • Does the latest Ipod Classic use the same charging pins as the earlier versions?

    Does the latest Ipod Classic use the same charging pin positons as the earlier versions as I want to use it in my Audi where my 5th gen Nano will play but not charge as the pin configuration for charging changed from that of the earlier models.

    If your 5th gen nano doesn't change, then a new iPod Classic will not either.
    The "change" was that older iPods used firewire to charge the iPod. But that's 12volts (the same voltage as a car's battery). Then along came charging by USB, which is 5volts. So car manufacturers who were on the ball, introduced electronics to drop the 12v car battery voltage to 5v and put that 5v on the appropriate USB pins. (I would hope, that by now, every car manufacturer has sorted this out, but of course that doesn't help anyone with an older model car.)
    The incredibly obvious - to anyone with technical knowledge - was that one day, Apple would stop the 12v charging method on newer models of iPod. But somehow, a lot of manufacturers of devices that charge iPods failed to see this. (It really was incredibly obvious, believe me!)
    It wasn't just car manufacturers who were caught out by this, so were Docking Station devices. I know of one make, where the manufacturer recalled the ones still in shops so that they could re-work them to charge using the 5v USB pins.
    In my car, made around 2006, I had an external device fitted so that I could plug my iPod into the car stereo through the Dock Connector. But hey, guess what? That device will charge my iPod Classic, but not my iPod Touch.
    A long-ish answer, but hopefully it not only answers the question, but tells you why too.

  • Does the new Classic run the same software as the older one?

    Does the new (120GB) version of the Classic run the same software as the older ones (80/160GB)?
    The reason I ask this is because I am interested in a Classic, but only the 160GB version. Will it run the same software, with the same features, as the new 120GB version?
    For that matter, is there any difference between the two versions of the Classic, other than storage capacity?

    Babaganoosh wrote:
    What are the new software features, other than Genius (which I don't plan on using anyway)?
    Some that I have read about include...
    Better battery life.
    Same slimmer size as the old 80GB (I guess the 160GB was pretty chunky).
    The headphone port now supporting the new remote control and microphone headphones (where ever that gets released) so you can record your own voice memos and control the iPod from the headphone cord rather than digging it out of your pocket.
    Also when watching videos, IF the video has them encoded in, you can now turn on subtitles or listen to alternate audio tracks (e.g. the Spanish translation, directory commentaries, etc.). But again, this would assume the video has those features encoded into the video. The iPod only turns them on.
    That is about it. I lifted most of the above stuff off the iLounge review (which is quite good) found here...
    http://www.ilounge.com/index.php/reviews/entry/apple-ipod-classic-120gb
    Cheers,
    Patrick

  • I want to play my ipod classic through my hi fi and recharge at the same time, would the apple 5w usb mains adapter allow this?

    Can I use the apple 5w usb mains adapter to charge my ipod classic at the same time as playing the ipod through my hi fi, I have connecting cables dor the hi fi.  Cheers.

    Have you dropped it by any chance? I reccommend you take it back to the shop and swap it for a new one.
    i hope this info helps

  • 160G Classic: sort order of contacts

    Yep,
    I am just starting to discover the features of my brand new 160G Classic. I have noticed, that I can choose between first name or last name as the sort order for contacts. But it looks like the contacts are always displayed as firstname and than lastname.
    What sense does it make if I sort all the contacts in order of their lastname, but it's their firstname which got displayed first?
    Any idea's out there? Did I miss anything? Can anybody confirm that behaviour?
    Thx!

    I tried to generated one vcf file for each contact rather than having one vcf file for all contacts. This helped me to work around some addressbook issues with my 4G iPod. But the Problem with my new Classic remains the same.
    The list of contacts is still showing "Arthur Dent" rather than "Dent, Arthur" eventhough I have selected "sort in order of last name". This is ridiculous as it prevents efficient browseing of all contacts.
    Any ideas, comments, hints or even solutions out there?

  • Bought a used 160G classic

    I picked up a 160G classic from the local pawn shop today. I have started resynching with my music libary with no problems. My question is though how do I rename it? Also the date and time it displays are not correct, how do I fix this? Thanks  in advance...

    To rename
    In iTunes Device pane on the left - click on the iPod name, then change the name to whatever you want.
    http://support.apple.com/kb/HT1789
    You can change the DateTime in the iPod Menu
    Settings->Date & Time
    Here is the link to iPoad User Manual.
    http://manuals.info.apple.com/en_US/iPod_classic_160GB_User_Guide.pdf
    Have a nice day.

  • I-Pod shows the same artist 10 times or over and over

    I Pod classic shows the same artist over and over

    There are many reasons this could happen, but I'll list a few possibilities:
    1) You have your iPod on manually manage, and you've dragged the same songs many times onto the iPod.
    2) You have many duplicates of the songs in iTunes and it's syncing everything to the iPod.
    3) There's something wrong with the iPod and you should restore it in iTunes and set it back up fresh and load the songs you want back onto it.  Keep in mind that restoring the iPod will lose things that are on it, so make sure you have your songs in iTunes before doing this.

  • Different SBA DNS SRV entry for the same dns zone?

    Hello,
    I got here a testlab with one enterprise pool and one sba deployed. The Branch Site got also an DNS Server installed. Both are using the same dns zone "test.com".
    Of course now i got different server for the same SRV Record _sipinternaltls._tcp.test.com - one for autodiscovery in the enterprise pool and one for the sba. Also I want to add the second one as failover srv + the DNS Server in the Enterprise Pool should
    be used as a Forwarder.
    Now I got some issues how to deploy several entries on two different dns server for the same zone.
    1.) If I add manually the same zone + DNS SRV entries on the SBA the dns is somehow not resolving/forwarding the entries on the other dns server in ee to other servers which are not on my SBA dns.
    2.) If I only pinpoint the SRV entries for _sipinternaltls._tcp.test.com (one for sba and failover for ee site) the dns won't resolve the second a record to the enterprise pool.
    What is the Best Practise for DNS SBA? Always point to the enterprise pool and, therefore, no other configuration is needed?
    Regards DrWho

    I played a little bit around. Problem was that I can not add the pinpoint dns srv entries via gui. Aditionally the tutorials did not work as my DNS server for SBA is not on a domain controller. In the end I did this:
    sbafe -> fqdn of my sba
    eefe -> fqdn of my frontend of enterprise pool
    dnscmd . /zoneadd _sipinternaltls._tcp.test.com. /primary /file _sipinternaltls._tcp.test.com.dns
    dnscmd . /recordadd _sipinternaltls._tcp.test.com. @ SRV 0 0 5061 sbafe.test.com.
    dnscmd . /recordadd _sipinternaltls._tcp.test.com. @ SRV 10 0 5061 eefe.test.com.
    dnscmd . /zoneadd sbafe.test.com. /primary /file sbafe.test.com.dns
    dnscmd . /recordadd sip.sbafe.test.com. @ A 192.168.10.220
    dnscmd . /zoneadd eefe.test.com. /primary /file eefe.test.com.dns
    dnscmd . /recordadd sip.eefe.test.com. @ A 192.168.0.40
    Question is if that is a good best proctise or should the dns server within a zone contain the same records (Primary/Backup). The Client will then always hit the FE of the EE Pool first.
    Also its quite a lot of work to setup.

  • How can I have both genius playlist and regular playlist on my new 160g ipod classic. The list of songs are there, but when I click playlist, I only get the genius playlists.

    How can I have both genius playlists and regular playlists available on my new 160g classic ipod. I can see my entire song list, but no playlist other than the 3 genius playlist I just made.  Also how can I delete a genius playlist. Made the same playlist twice by mistake. Thanks.

    This was not a simple task.  Got it handled.  Had to call Apple support. Apparently, the 160g only syncs the genius playlist.  You have to go in and "tell it" to sync the entire playlist as well as the genius playlists. There is also an option for only syscing certain songs. On itunes, there is two sections; one for the stuff that is synced on your ipod and another separate list for the stuff in your library!  This is exciting for me as I am not computer savvy to say the least. 

  • I have a new ipod classic and i can't get any of my music to download to my ipod this is the second ipod classic they sent me and i have the same problem i think this product is a piece of **** and i want back my $300.00.

    I can't download any music from my cd's or my computer manually this is the second ipod  classic apple sent to me and i have the same problem i am thinking about asking apple for my $319.00 back i am fedup.

    Winston,
    If you provide a little more detail about whats happening when you try add music to your iPod instead of ranting about how much your iPod *****, somebody here may be able to offer you some much need assistance. 
    Totally up to you though.
    B-rock

  • Does anyone have any advice on how to fix a 6th generation classic, when the manual reset doesnt work either?

    Hey,
    Ive bought and ipod , without reading the description, silly me and it says the ipod wont turn on at all......ive tried the manual reset ( menu and middle button) still not working at all.
    I wondered if anyone had any advice, whether theres another way of making it work, or whether im going to have to go into an aple store and see what they can do?
    Thanks

    If you followed instructions from the apple support site: http://www.apple.com/support/ipod/five_rs/classic/
    and you have not been successful, it will be harder. You can always google your problem and watch the different links and youtube sessions explaining how to do it. If your iPod is dead, meaning nothing shows up on the screen when you attempt to revive it, then it could mean the battery is totally dead or other hardware issues that prevent a power up. Don't try to spend too mcuh money in reviving your classic outisde of the Apple route, you might just end up spending that amount plus having to go to the Apple store anyway. I would try to see if it can be revived on the cheap by just prowling the web and trying the different solutions, but please don't open up your iPod, the classic is notorious for being difficult to open without damaging your chrome cover or even the front faceplate. if you can't do anything and you really want to revive it, go to the store and weight your options cost wise. If your final solution is to say goodbye to the iPod and want to get a new one, Amazon offers the same ones for less and the warranty is exactly the same plus you'll have 30 days to return it instead of the standard 14 from the Apple store (no tax too), you'll still have to pay for shipping but at least you'll have longer to consider keeping it. If you want to get warranties longer than Apple and for cheaper, use SquareTrade, they are very afforable and they will restore your iPod to like new and will cover for shipping it both ways (check them out first to see if they still do).
    Hope htis will help

  • How can I quickly get the same album art for all tracks on an album without manually doing them one at a time?

    I am having trouble with album art linked to each track. My library is ripped from my own cd's and ITunes only provides some of the artwork from a find artwork search. The rest must be found and added one at a time manually from web. This process is tedious and time consuming for me. Is there a file in iTunes related to each album that I can just drop the art once and it shows up linked to all the tracks from that album when they play? I've tried selecting all songs from an album and dragging the artwork to the artwork window once in hopes of all tracks getting the artwork at the same time with no luck. Any advice for this paltry artwork dilemma would be appreciated. If Cassidy & Greene still owned this ******* child of SoundJam I know I would not be having this problem! HaHa...Thanks for any advice/help with this problem.

    Thx 4 quick reply alexbird. Your method will work and after a little experimenting so will this: Just go to the album art view option and highlight the album you want artwork for. Drag the artwork from your album art web search page to bottom left hand album art window in iTunes and just drop it there. A small progress window then appears showing each album track adopting the dropped artwork one by one. It only takes 10-15 seconds for all of the tracks on your album to adopt the new artwork. I then went back and removed unwanted artwork(from the albums that had it) track by track from the get info menu. This goes pretty quick as you just pick track>get info>artwork>highlight art>delete>ok for each track.
    This drag/drop to the album art view page has been the simplest and most effective way I have discovered to manually import album artwork into iTunes so far. Hope this helps someone else out there. Any other methods or suggestions to do this task added to this thread will be duly noted. Thx... Oh, I am currently using iTunes 10.5.1

Maybe you are looking for

  • Urgent help with quick translation questions

    Hello, I am somewhat new to Java. I have a translation to hand in in a few hours (French to English). Argh! I have questions on how I worded some parts of the translation (and also if I understood it right). Could you, great developers, please take a

  • Upgrading my old imac to OSX from OS 9.2.2 from an external cd drive

    Hi there I dusted off my old imac for my son to use which was I think bought around 2000 its blue with a cd load tray. I know its got OS 9.2.2.2 currently. I wanted to upgrade the system to OSX 10.4 from a tiger disk. Unfortunately the cd drive isnt

  • Mobile Video Editing on the Macbook Pro 13'' - Some questions...

    This is my first time visiting this forum, and I just wanted to get some thoughts on a mobile video editing setup I am looking to create... Here's what I'd like to do: - Use a Macbook Pro 13'' as my primary editing machine using Final Cut Studio for

  • Why Poor DVD quality Encore CS6 with Sony FS100 MTS files from PPro CS6

    I am using PPro CS6 on a MAC Pro Quad zenon with Boot Camp. On PC side I was using PPro CS6 & Encore CS6 with MTS files from  Sony NX 5U with NO Problems. I just started using a Sony FS100 recording 1080i (60) format MTS files. When I Dynamic Link to

  • Problem in Index administration

    i am able to add webaddresses in System Administration -> System Configuration ->Knowledge Management ->Content Management -> Repository Managers -> Web Addresses. But the same is not reflected in www folder of KM. When i try to map datasource from t