Is 180w PS enough for a Cel. p4 based system?

I am building a system MSI MS-6526-GL-L, Celeron 1.7GHz 478-pin, 256ddr, Maxtor 81GB UDMA133 7200rpm, DVD. I need a small case, the MB is a MicroATX and all the MicroATX cases I see are 180w. Is this enough power for the system I'm building?
This is for buisness programs only, no games. I usually build XP systems and run 350w minimum power supply but I need compact system.

should be i see no reason why not, especially since you aren't using a GeForce 4 which are power hungry, it should work fine

Similar Messages

Use NetWeaver internal ITS as ITS for another 6.20 based system

Hi,
Our R/3 systems are 4.7 with 6.20 WAS. So to use a the webgui I need to have an ITS (for which I dont have a server available).
We have a Netweaver 2004s based Solution Manger though with an integrated ITS. Do you know if it is at all possible to use the integrated ITS of the Netweaver system as an ITS for the 6.20 based system?
If yes, how do I set it up?

Hello Adriaan,
Sorry, that is not possible. The Integrated ITS must reside on the system that you wish to have ITS access from. Please see note 709038 for further information. Thanks.
Edgar

New Draft-N Card for Legacy PowerBook (PPC based)

Any words yet or recommendation on a wireless card for legacy PowerBook (PPC-based) systems? I know the newer systems have the updated AirPort Extreme (using the Draft-N enabler), but what about others who have older PowerBooks with a user-installable card. Will Apple be creating a new wireless card for use in these systems? Or is there a 3rd Party compliant card to use in the PC Slot of the PB G4 that is Draft-N and works with the new AirPort Extreme base station N?

I doubt it.
When Airport was upgraded the last time (from 802.11b to 802.11g), the older hardware was stuck with integrated cards that could not be upgraded.
Is this Apple being mean? Not really.
The new n hardware needs two or three antennas to work. Older laptops with 802.11g have only one antenna built into the case - so you can't simply upgrade the card.
The only way to upgrade is if a third-party manufacturer produces a mac-compatible version. Which could happen. But it would be the sort of card that sticks out of the PC-Card slot.
It's not ideal, but remember that laptops get upgraded all the time, and you can't upgrade the processor or the screen either.
Glyn

Re:update windows 7 Service Pack 1 for x64 based system (KB976932)

Hi, I tried to updte automatically and mannually : windows 7 Service Pack 1 (KB976932) for windows 7 x64 based system. However error 404, happened, no solution suggested I can find online. Could someone can help me?

Hi,
From your error message, error 404 generally means whenever someone asks for a page that’s simply not
available on your site. The reason for this is that there may be a link on your site that was wrong or the page
might have been recently removed from the site. As there is no web page to display, the web server sends a
page that simply says "404 Page not found".
Did you get this error when you download or install process?
Please disable your firewall and antivirus temporarily and then download the package from the following address:
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
http://www.microsoft.com/en-us/download/details.aspx?id=5842
Note: make sure choose the proper version (x64) for your system.
After that, run this "Fix it" tool below and install the update again:
Fix the problem with Microsoft Windows Update that is not working
http://support.microsoft.com/mats/windows_update/en-us?entrypoint=lightbox
Karen Hu
TechNet Community Support

WLS 6.0 solid enough for development - when?

If a production product that uses EJB with WLS needed to be released in 6
month to a year, with development starting in 6 to 8 weeks, would you
suggest using EJB 2.0 with WLS 6.0 ?
Thanks,
David

This question is really more suited to the EJB group. But since you've asked, my
understanding is that dependent object support will be added sometime after GA. If
you have more specific questions, post to the EJB group where you'll get more
informed responses.
dan
"Nam D. Nguyen" wrote:
Hi Dan,
So would that mean the January release would include the so called
"dependent objects" feature? Thanks for any info.
---Nam
dan seeman wrote:
Hi David,
Sorry for the delay in responding...
Current wisdom about the final EJB2.0 spec. release is sometime in January.
However, keep your eyes on the Sun site for schedule updates. As for the
Weblogic Server 6.0 release, we're currently scheduled to release before the
year's end. But as you know, the beta is available now, so you can do your
investigation work now. You don't have to wait for the release for that...
dan
David Dunkley wrote:
Hi Dan,
Thank you for the reply.
Do you know the expected timeframe for the final release of the EJB 2.0
specification and also for WLS 6.0 to go production ?
Thanks again for your help,
David
"dan seeman" <[email protected]> wrote in message
news:[email protected]...
Hi,
It's difficult to answer these kinds of hypothetical questions. Theydepend
on so many variables (middleware servers/containers, with EJB, withwebapps,
how extensive/deep/complex is your product?). The safe answer is "it
depends."
However, if you are comfortable with all these areas, yes 6 months to ayear
should be more than enough. WLS 6.0 should be more than stable enough for
your purposes.
dan
ps. If you have more specific questions about EJB20 support, take a lookor
make a post to the ejb list...
David Dunkley wrote:
If a production product that uses EJB with WLS needed to be released in
6
month to a year, with development starting in 6 to 8 weeks, would you
suggest using EJB 2.0 with WLS 6.0 ?
Thanks,
David
think peace
dan seeman
weblogic test engineer
[email protected]
Nam D. Nguyen
Senior Consultant
ACS (Architect Component Services)
Bea Systems Inc.
Cell: (403) 605-0080, email: [email protected]
=============================================================
"Wovon man nicht sprechen kann, Daruber muss man schweigen."
- Ludwig Wittgenstein--
think peace
dan seeman
weblogic test engineer
[email protected]
[dan.seeman.vcf]

***CALLING ALL MACBOOK AIR USERS*** Will the base model of the 2013 Macbook Air 11" be enough for my needs?

Ok,
This is my first post to this forum.
I have a Late 2011 i5 Macbook Pro. I used this last year during college but the weight was just unbearable. I have decided this year to upgrade to a Macbook Air. Here is my question.
I am starting uni and will be studying Nursing and so I will not be using any heavy software or progaming etc.
The only thing I will use is Office for Mac and browsing. I normally keep around 15 browser tabs open whilst I research.
I also like to download so I would also like Vuse on my Macbook too. I own an external hardrive and so memory isnt a big deal (unless it makes a difference to the performance of the mac itself, Sorry im not great with this stuff)
Do you guys think the base model of the 11" Macbook Air (1.3ghz, 4GB ram, 128GB SSD) will be enough for my needs or do you think I would need to custom build it (1.7ghz, 8GB ram, 128GB SSD)?
My boyfriend thinks for what im using it for the base model will be fine but I dont want to get it to find that its not enough as my main concern is lag but I also do not want to pay extra for something which isnt going to be fully used (ie my current Macbook Pro).
For those of you who do have the 11' Macbook air, how are you finding it? Also, this will be my main computing device, I am selling my Pro but am thinking of buying the wireless keyboard and trackpad so I can connect to an extenal monitor whilst im at home.
Thank you guys in adavnce for any answers.

I too have a 2011 mackbook pro and I also have a mid 2012 mackbook air 128 gb ssd and 4 gb ram , I am probably goint to sell the pro because I just don't use it anymore . If you intend to do heavy multi tasking 8gb ram as suggested by a previous poster might be worth the extra money.

Display Color for sigle CELL in ALV report

Hi all,
I have one doubt is it possible to make a particular cell as read color in ALV.
Ex: I have one field which shows amount in my ALV report,My requirement is that when ever the amount is less then 'ZERO', I have to show that particular cell in read color.
Regards
Anil Kumar.N

hi,
here code for coloring a perticular cell
TYPE-POOLS:slis.
TABLES:mara,
       makt,
       marc.
DATA:BEGIN OF itab OCCURS 0,
      matnr LIKE mara-matnr,
      maktx LIKE makt-maktx,
      werks LIKE marc-werks,
      mtart LIKE mara-mtart,
      matkl LIKE mara-matkl,
      meins LIKE mara-meins,
      ntgew LIKE mara-ntgew,
     rowcolor(4) TYPE c,
      cellcolors TYPE lvc_t_scol,
     END OF itab.
DATA:t_fcat TYPE slis_t_fieldcat_alv,
     t_eve TYPE slis_t_event.
DATA : st_layout TYPE slis_layout_alv.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:mat FOR mara-matnr. " no intervals no-extension.
*PARAMETERS:mat LIKE mara-matnr.
SELECTION-SCREEN:END OF BLOCK blk1.
INITIALIZATION.
PERFORM build_cata USING t_fcat.
PERFORM build_event.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM display_data.
*&      Form build_cata
      text
     -->TEMP_FCAT text
FORM build_cata USING temp_fcat TYPE slis_t_fieldcat_alv.
sy-tvar0 = sy-uname.
WRITE sy-datum TO sy-tvar1.
DATA:wa_fcat TYPE slis_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-seltext_m = 'Material'.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-seltext_m = 'Description'.
wa_fcat-fix_column = 'x'.
wa_fcat-key = 'X'.                                     "To color a column
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Plant'.
wa_fcat-key = ' '.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MTART'.
wa_fcat-seltext_m = 'Type'.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATKL'.
wa_fcat-seltext_m = 'Group'.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MEINS'.
wa_fcat-seltext_m = 'Measurement Unit'.
APPEND wa_fcat TO temp_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'NTGEW'.
wa_fcat-seltext_m = 'Net Value'.
APPEND wa_fcat TO temp_fcat.
ENDFORM.                    "build_cata
*&      Form build_event
      text
FORM build_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = t_eve
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "build_event
*&      Form data_retrieval
      text
FORM data_retrieval.
SELECT maramatnr maramtart maramatkl marameins mara~ntgew
   maktmaktx marcwerks
INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara INNER JOIN makt ON
maramatnr = maktmatnr
INNER JOIN marc ON
maramatnr = marcmatnr
WHERE mara~matnr IN mat.
SORT itab BY matnr.
DELETE ADJACENT DUPLICATES FROM itab.
ENDFORM.                    "data_retrieval
*&      Form display_data
      text
FORM display_data.
*******************************For setting Cell Color*******************************************
DATA ls_cellcolor TYPE lvc_s_scol .
st_layout-coltab_fieldname = 'CELLCOLORS'.
READ TABLE itab INDEX 5 .
ls_cellcolor-fname = 'MATNR' .
ls_cellcolor-color-col = '1' .
ls_cellcolor-color-int = '1' .
APPEND ls_cellcolor TO itab-cellcolors .
MODIFY itab INDEX 5 .
st_layout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = 'ZALV_DS'
      is_layout          = st_layout
      i_save             = 'A'
      it_fieldcat        = t_fcat
      it_events          = t_eve
    TABLES
      t_outtab           = itab
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "display_data
Please reward if useful...

I want to buy ipod touch 4 (8GB) , but i dont know is that enough for me

I want to buy ipod touch 4, my friends said i should buy 8GB one, but i dont know is 8GB enough for me to use. some people said that it only have 6.7GB for you to use, cause the ipod apps already used some of it. I want to have maybe 100 songs, some apps, pics, few games, 5-7 books, few online movies. For some of these, i would probably delete them and download new ones. So, any suggestion?? Please? I really want to buy it before this summer. but i dont want waste my money.

I would opt for the 32 GB one. Many users have been disappointed when they purchased the 8 GB since they quickly filled it.
Some apps can take 1 GB themselves. See the following for some other stirage useages:
iTunes Store: Download times will vary

Apple MacBook Air 2011 - powerful enough for most tasks?

I want to buy the 2011 model of MacBook Air 13” 128GB, but I have some questions for you guys, would appreciate it if you experts have answers:
1) I'm currently on a two year old Acer Aspire 6920G laptop with 17”, Windows 7, Core Duo 2 (T5750 @ 2.0 Ghz) and 3 GB RAM - will my new MacBook Air feel one million times faster to use?
2) Can I later (easily/cheaply) upgrade the MBA's RAM to 8GB?
3) I mostly use web browsers, office software, IM programs, media players etc., but I will also use it a lot for electronic music making (with Ableton Live and virtual instruments/effects) and DJ’ing (with Avid Torq). I almost never do any heavy duty image work, and I rarely code/edit video - will the MBA be fast enough for the things I do most often, or do I have to get a MacBook Pro?
4) How often does the fan start up? And when it's on, how much noise does it really make when it approaches 6500 RPM?
5) I read that with Lion the fan is running more than with previous OS'es - can this really be fixed with booting in 32-bit rather than 64-bit? And what will that entail for the CPU power/battery longevity/software compability?
6) Is the graphics adapter in my current PC (nVidia GeForce 9500M GS) much more powerful than the MBA's Intel HD3000, or is it almost the same now?
7) Is it easy to run Windows XP or 7 in Boot Camp? I have a few Windows programs I'd like to continue using.
8) Should I alternatively use a few more bucks and get a MacBook Pro with SSD-disk? Is that less "locked" and more compatible with what might happen in the future, technology-wise?
9) Is it possible/cheap to switch the English keyboard to a Norwegian one next time I'm visiting Norway?
I have to make a purchase of a new laptop soon, so I'd GREATLY appreciate any answers. Since I have had software- and hardware problems with every PC I've ever owned, I frankly do not trust them anymore. So here we go then - Mac!

Let's see if I can help
1)The i5 Macbook air should be considerably faster than your previous laptop. Mostly because of the SSD and the i5 processor.
2)I'm not sure about the latest macbook airs, but previous models have their RAM modules soldered to the Logic Board, I don't think you can upgrade the RAM at all.
3)The MacBook Air might be fast enough, but Just, I would go with a Macbook Pro, mostly because it's easier to upgrade.
4)It will kick in several times but rarely at full speed, and it's not that loud. Would recommend a macbook pro for cooler running.
5) I didn't notice any difference between Lion and Snow Leopard regarding fan activity. Lion is a 64-bit only system, there is no way to boot in a full 32-bit environment. Compatibility can be an issue with some software, ie. traktor users have been reporting problems with external hardware running Lion, but updates will fix these soon.
6)They are at comparable levels, the Intel HD 3000 might even be better at some point. It's much better than the 9400m that older macbook airs had.
7)Yes, as long as you have the optional super drive to install it.
8)Yes, that would be a better idea.
9)I don't think so, never heard of people swapping keyboards on Macbook Airs or Pro's.
I'd buy a MacBook Pro if you are planning to keep it for long. It's more powerful, more upgradeable and runs cooler and quieter than the air.
Hope you get your mac soon!

Help! I zoomed in on a picture online and now I can't zoom out enough for my desktop to return to normal. How do I get my desktop back to its regular dimensions?

I zoomed in on a picture online by holding control and open pinching and for some reason, my desktop was enlarged as well. How I can't zoom out enough for my desktop to return to normal? I would like to be able to see my whole desktop without scrolling over to see the time or the file menu!

Hold down the Control key and drag two fingertips down the trackpad toward you.

My i pod shows my charger and itunes so i download i tunes. But itunes said i had to do my passcode but the charger and itunes symbol wont go away long enough for me to enter my passcode! what do i do?

My ipod shows my charger and itunes, so i download itunes. But then itunes says i musst enter my passcode on my i pod but the charger and itunes symbols wont go away long enough for me to enter my passcode. what should i do?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

Hi Wayne,
Thank you for this response. I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.
Kind regards
Paul

How can i apply different color for each cell in jlist component?

hi guys i need your help and sorry if my english is very bad..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..
Edited by: ryrene on Mar 21, 2010 12:13 AM

ryrene wrote:
hi guys i need your help and sorry if my english is very bad.
..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..I'll see your tnx, and raise you dve bmbrs & nplm.

Is there an app for blocking cell calls

Is there an app for blocking cell calls?

There is not. Look to your right under "More Like This" for related discussions.

Is it good enough for gaming?

My question is actually does the Macbook Pro have enough of the graphics and stuff i'd be buying the i7 2,3ghz and 8gb ram
Will it be enough for running CoD serie and BF for instense?
Greetz

Without knowing much about gaming, I would definitely say yes. Without any problems. As long as they are compatible, they should show up more vivid and beautiful than in other computers.
Cheers

Is 180w PS enough for a Cel. p4 based system?

Similar Messages

Maybe you are looking for