Is 1841 router compatible with wic module U WIC -2MFT –G703 ( 2 E1 ports) ?

Hi frainds
I have cisco 1841 router
1841 Software (C1841-ADVSECURITYK9-M), Version 12.4(3g)
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
with
2 FastEthernet interfaces
2 Serial(sync/async) interfaces
1 Virtual Private Network (VPN) Module
will this router supoort Uwic 2 mft-g703 card ( with 2 E1ports) ,

These are the following modules supported on the 1841.
http://www.cisco.com/en/US/prod/collateral/routers/ps5853/product_data_sheet0900aecd8016a59b.html
The one you listed only works with the 1700 series which is end of life.
"If this post answers your question, please click the "Correct Answer" button"

Similar Messages

  • Kindly Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN ?

    Kindly 
    Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
    Thanks,

    Linksys/Cisco E4200 are compatible with DHCP. Second, these Wireless-N routers are only capable of enabling the VPN traffic to pass through the device.  You will need a VPN router and software to create the actual network to connect with your VPN client.

  • Is Linksys Wireless-G WRT54G v5 Router compatible with Windows Vista?

    Hello all, I'm new to these forums, just signed up tonight because I am purchasing a new Desktop PC in a week or so. I just would like to ask and make sure before I purchase if my router is compatible.
    On my new PC it's going to have Windows Vista Home Premium 32 or 64 bit I haven't decided yet.

    Yes, your router is compatible with Windows Vista...

  • WRT54GL router compatible with Mac?

    Does anyone know if the Linksys WRT54GL router is compatible with Mac computers? 
    Thanks for any insight.  

    Yes, All Linksys Router's are compatible with MAC Computers...

  • Is medialink router compatible with mac

    i bought a MediaLink Wireless-N broadband router. I want to know if this is compatible with mac. The software wont load.

    You don't need any software. Just plug and play. The software is for windows pc's. Read the manual to use your browser to set up the router.

  • Actiontec M1424WR Router compatible with the new VMS1100 Cable Box

    Hello all,
    Been trying to upgrade to the new Quantum Fios. To begin Verizon never sent me a upgraded router that was compatible with the VMS1100 set top box.
    They shipped me the Actiontec M1424WR Router looks like my old router but with a red front piece. I'm getting 75/75 service as well.
    This is an older router still. In fact its not even in production anymore. My concern is that it's not going to work with the new VMS1100. Hate to go through the process of setting it up and it doesn't work.
    Can anyone help and clarify if this older router will still work with the VMS1100 set top box?
    Thanks!
    Gene
    Solved!
    Go to Solution.

    VMS will work with the Actiontec Rev I or the Fios Quantum Gateway router.

  • Is my e2500 router compatible with mavericks?

    I am trying to reset my linksys e2500 wireless router and when i run the disc it tells me that I am not up to date.  Is this router not compatible with Mavericks??

    Am using Mac Pro 5,1.
    The drop outs to internet happen when connected to a DSL modem via my Asante router.  All connections are ethernet; not using wireless.
    When I connect directly via ethernet to my Qwest DSL modem, and bypas the router, no problem.
    Drop outs while Safari is open, or Google Chrome is open, can occur anytime. If Google Chrome and Safari are both open at the same time, internet dropout occurs for both simultaneously.  They occur after waking from sleep also.
    I can get back internet connectivity in both Chrome and Safari by unplugging the DC power to the Asante router for 5 seconds, and plugging the power back in; internet connectivity resumes instantly in both Chrome and Safari.
    So the problem is not isolated to Safari.
    The problem seems isolated to my Mavericks install completed yesterday because:
    This same Mac Pro running Win 8.1 from a separate SSD and separate boot to Win 8.1 through the router does not have the problem.
    My tenant downstairs running Win 7 through the router does not have any connection problems.
    There were no internet drop outs when connected to DSL modem via this same router when I ran Mountain Lion.
    Sparky, can you describe a "step-by-step" on how you reset your IP address, etc?
    Is this a "handshaking problem" between Mavericks and my router?
    Do others have suggestions for solution paths to try?
    Will report back right away.
    Thank you.

  • Router compatible with windows 8?

    I have windows 8.  Is the Netgear N300 Wireless Router (model WNR2000) compatible with windows 8?

    A router doesn't care(for the most part) what OS you're running.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • Router Compatible with WRT54G Antenna Connection

    I have to replace our WRT54G router--it's currently connected to a power booster and and omni-directional antenna.  Is there a router with an antenna connection compatible with the WRT54G--preferably a single antenna model?
    Thx in advance,
    David Miller

    Here are some...
    http://www.google.com/search?q=routers+with+antennas&sourceid=ie7&rls=com.microsoft:en-us:IE-SearchB...

  • Configuring - Cisco 2921 with Switch Module/POE PS and 3750-x 24 port switch

    This is what I have
    - Cisco 2921 router
             with SM-ES2-24-P switch module and
                     POE power supply
    -Cisco 3750x- 24 port Switch
    I have port G1/0 (which connects to 24p Switch Module port g0/26 logically) configured with 3 sub interfaces (management, User and VOIP)
    I want to connect 3750x to G0/1 on 2921 via fiber GBIC but want to use same three VLANs
    I can not daisy chain 3750x via the switch module because it does not have fiber port.
    I do not want to create another routed (g0/1) interface because I want to keep Users on both switches on the same subnet without further splitting the subnet in two.
    I hope I am not making this confusing.
    How can I bridge g1/0 and g0/1 so I can pass vlan traffic between two switches?
    Second problem i have is ...
    I have a VOIP connected to switch module (SM) and it is not getting any power.
    I went in to all the interfaces on SM and issued power inline auto command
    On the SM (sh power inline) - available is 0.0(w)
    on the 2921 (sh power inline)
       - power supply status is good,
       - maximun power available is 280.
       - interface G1/0( which connects to SM)
          *device is unknown
          * powered off
         * allocated 0.0 watts.
    I already tried resetting SM
    Is there any other command I need to issue?
    thanks for your help.

    I'm having a similar issue. I can get trunked connectivity between the switch module and the router if I put the IP address on the router sub interface, but not if I put it on a VLAN interface. I was hoping to have it on a VLAN sub interface on the router so I could use Gig0/1 and Gig0/2 to connect other switches and have them on the same VLANs. I'm using Gig1/0 on the router side and Gig0/51 on the switch side (48-port module).
    Any help? Am I on the wrong track altogether?

  • What happens if 3700 with WSSI module is connected to 802.3af PoE port?

    I know that the 3700 itself will drop to 3x4 MIMO if it only gets 15.4W of power (takes 16.8 with 4x4).  If I add in a WSSI module, I know that is not enough power to run the WSSI module.  We'd like to deploy our APs with the module installed and light up WSSI only as we get 802.3at power available.  What I don't know is if the AP will light up as 3x4 with WSSI disabled, or if the AP will just completely fail.   I should get a chance to test this soon, but if you happen to know, please tell!  
    Thanks!
    Gary Hahn

    If you have enough power to the AP, you can look at the GUI and under the main screen under Access Point Summary, you will see Dual-Band Radios... the WSSI or WSM will show up there.
    Please rate helpful post and Cisco Support Community will donate to Kiva
    Scotty

  • Netgear G router compatible with new iMac 27" N?

    I'm having trouble getting my bright shining new custom-built 27" iMac to connect to my Netgear G router. I thought the N built into the new iMacs was backward compatible: http://www.apple.com/wifi/80211/
    What say you networking gurus?

    It should work fine. It would help to know more details. For example, is the network not showing up under the AirPort icon in the menu bar? Is it showing up and selectable, but not accepting the passcode? Does it appear to connect to the network, but Internet access is not working? Those are completely different issues.
    As a method of trouble-shooting, I would try to isolate the cause better.
    If possible, try connecting it to the router using an Ethernet cable first, just to confirm the Internet connection is working properly. If that is too difficult due to the relative locations of the Mac and router, you can skip it. But if you find that it still does not work, the cause is more than just the wireless not working.
    Try disabling the security on the router temporarily. See if you can now connect. If it does not work, there is general problem with the wireless networking. If it works with no security, then you know the cause is related somehow to the security protocol being used. You can focus trouble-shooting in that area.

  • Is BEFW11S4 router compatible with FIOS?

    My daughter has Verizon FIOS as her ISP.  Can the BEFW11S4 be used in that environment?  Is there any special configuration settings I need to change when used in that environment?
    Solved!
    Go to Solution.

    I think it may work because because BEFW11S4 supports PPPoE connection.
    I believe though even with Fios you can use your old router with the system, they just give you a free one when you sign up.

  • Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

    I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
    If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

    A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
    And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

  • Is my AirPort Extreme base station A1034 (802.11g) compatible with Comcast 50 Mbps internet service?

    Is my AirPort Extreme base station A1034 (802.11g) compatible with Comcast 50 Mbps internet service?

    The WAN port on the A1034 will handle up to a 100 Mbps Internet connection, so you are OK there.
    Wireless on the A1034 is limited to 54 Mbps tops, so things should work OK as long as wireless devices can receive a strong wireless signal from the Apple router.

Maybe you are looking for