Is 2030 pixel too with for a browser fill??
I need a painting as browser fill.
I've tried 1400x1738 and hakked for "tile" and "position" to the left and for "scrolling" in the fill optinon in Muse
But when I publisher the site, it comes a line about 30 cm on the right side, where the image begins again .... (so you see a litte part of the image again in right side)
It doesn't look good.
Then I have tried 1700 px in width, but this doesn't help either.
Then I tried 2030x1738 pixels and now it looks pretty good. But is the with with 2030 pixel too with for the browser??
I have a phone issue of the homepage, so I have not to think about the phone browser.
If you don't want to use scale to fit or scale to fill for some reason, and you want the image to be wide enough to fill every possible browser background, then you'll need a very large image.
Since you don't control how big a user sizes their browser window, some users with very large monitors, or users who stretch their browser window across 2 monitors might have a browser window 4000 pixels wide. Usually 'scale to fill' or 'scale to fit' is the option you want to use to fill the browser background with a single non-tiled image.
Similar Messages
-
How to create a hot spot for a browser filled image?
I have a background image created in Photoshop in the browser fill, scale to fill.
This is my landing page and would like to create a hot spot or "invisible" rectangle to link to another page in my site when clicked.
I have this done and working, however, my problem is that when my browser size is enlarged or reduced, the spot where I want the hot spot to be changes in size and location.
I want to create a hot spot that will keep its form around my logo no matter the screen size.
I have tried this with a no fill box and white stroke to see how it reacts with each fill property but cannot figure out how to create a box to be in a fixed position that will always match up
with the browser fill image location and size.
Thanks for your help.Hi
Have you tried to pin the box on page so that it should be in fixed position ?
Also if want the box to be on some specific position with page scroll, then you can try applying scroll effects which would scroll the box on page but within defined positions.
Thanks,
Sanjit -
Browser Fill background not filling page. And website scrolling right to reveal whitespace.
A live copy of the site can be seen at http://www.tjrcomputersolutions.com/it-services.html.
The background used with browser fill is not reaching the footer when it is plenty big enough. (1400 px height). I have tried fiddling with "set to" options to no avail.
Also, the site is scroilling to the right showing white space whcih is obviously not OK.
I am very experienced with HTML, CSS, JS, etc, but decided to try out Muse this time. Unofortunately, due to Muse assigning completely arbitrary CSS tags, I can not decipher where the problem may be in the code. If anyone can help me with this it would be greatly appreciated!The white space on the right (and the horizontal scroll bar) is most commonly caused by an empty text frame or other no fill no stroke object drawn off to the right of the page in Design view. Try using Object:Unlock All on Page (if you normally make use of the Lock feature) and then do a Select All and look for handles that appear for one or more objects positioned off the right of the page in Design view (repeat the process in Design view for the master page that's applied).
For the browser fill, is the Browser Fill "Scale to Fill" option selected? -
Browser fill image cuts off at bottom when published from Muse to BC...?
The site previews fine in the browser but when I publish it to BC it cuts off the bottom of the image and just shows the browser fill color (which is dark grey). I'm pretty sure this is a BC issue because everything looks fine in Muse. I have done all I can think of to fix this but havn't figured anything out. Here is some information if it helps. Weird thing is only the img. I used for the header is listed in the css, the img. for the browser fill is not listed.
http://grasslandoregon01.businesscatalyst.com/index.html
Master Page css:
#u7524
border-style: none;
border-color: transparent;
position: relative;
background: transparent url("/images/header_swoosh.png") no-repeat center center;
background-size: cover !important;
#u7524_align_to_page,#u7579
position: relative;
#u32679
border-style: none;
border-color: transparent;
background-color: transparent;
color: #FFFFFF;
position: relative;Hello,
You probably did not find this article at the right time but there is one KB article explaining how to insert the Edge content into a Muse website.
Basically what you have to do is, after you publish the Edge project, to take the exported folder, or just the files, (but I'm totally into taking taking the whole folder) and upload them to your FTP where the Muse site is published. After that just use the "Object > Insert HTML..." option from Muse and paste the <iframe> code from the KB and customize the path to the folder where the files are located and the width & height for the iframe.
KB can be accessed here: http://www.adobekb.com/inserting_edge_content.html
An example can be found here.
- Edge project uploaded to FTP.
- Content of the project folder.
- HTML code
I hope this will answer your question.
Cheers,
Cristian -
Dear Community,
I'm synchronising my T3 with two PCs. One with Vista & Outlook 2007 and the other with XP & Outlook 2003. Both with the latest conduit & Hotsync Manager versions installed for each OS based on the availability on the Palm Website.
My problem is that when I synchronise the T3 with either PC and then try to sync it with the other I'm receiving the following error message for the Calendar:
Outlook Calendar
The passed buffer is too small for the reply data.
OLERR:0D-0008
OLERR:0D-0004
OLERR:0D-0001
- Slow Sync
Outlook Calendar synchronization failed
The second time the sync is successful but takes a long time and the actual problem is that it creates duplicates for records previously changed on either PC - but with a sync in between those changes, i.e. no conflict in the sense that the same record was changed in both environments since the last sync. I have configured the conflict handling to establish a hierarchy PC1-T3-PC2 but try to avoid them by synchronising as often as possible.
Has anyone come across that problem or any ideas? Can you somehow adjust the buffer size for the sync? I have been using Lotus Organiser & then the various Outlook versions for a number of years.
Thank you
Rainer
Post relates to: Tungsten T3
Post relates to: Tungsten T3As they say on TV, "Doh"!!!
I figured out the problem. I started the Sync tool, selected "Settings", then "Mcrosoft Outlook" tab and then "Select Folders" button. I browsed to the proper folders in Outlook (Calendar, Tasks, etc). Select OK enough times and retried the sync.
It worked. -
I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !
I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files? -
I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp -
I have my iTunes library on an external HD because it is too big for my iMAC 500GB HD. However, it is not backed up, so I need a solution to backup my external HD. Can I do this with any Apple cloud product or should I look elsewhere for cloud products? Will it be cheaper/easier just to buy another external HD to back up my existing external HD? Thanks
I don't know if this is me adding files to iTunes when the external wasn't connected
it is.
is it OK to just keep deleting that library on the Air?
i wouldn't - at least not until i
mount the external
point iTunes media folder location back to the external via preferences > advanced
consolidate my library via file > library > organize library
The ntfs hasn't seem to be causing any problems, but I've always wanted to know.
in order for your Mac to write to NTFS drives, it needs some help by installing e.g. the NTFS 3G driver. apparently that or something similar is installed on your Mac already. preferably, it would be formatted for Mac but then windows machines would need to have e.g. MacDrive installed to recognize the drive. -
How does one set up more than one game center profile on a single itunes account? For example, my daughter is too young for her own itunes account but would like her own Game Center profile to except invites and play games with her friends. Any help would be greatly appreciated.
Maybe:
Multiple game center accounts for...: Apple Support Communities -
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/816154]''
firefox 4 is not compatible with the skin i had been using for my browser, old factory black... i would prefer to keep this skin rather than use firefox 4... how can i revert back to the previous version of firefox?...Older versions of Firefox are available here:
http://www.mozilla.com/en-US/firefox/all-older.html -
I have done many DVD's for seniors for graduation so I am familier with Imovie. I have just finished a projec that is a combination of video, music and stills. I shared it through idvd. Now I can't burn it to a dvd because it is too large. It is too big even for a two sided disk. I have researched it and i find that blue ray would be big enough. Does apple offer blue ray burner? if so, what is the cost? I tried another route and took my external hard drive to copy it to a PC. there computer wouldn't recongize my drive. I am assuming it is because it is formated for apple. I tired copying it to a flash drive and and it says that it can't be copied because it is too large for the volume's format. Suggestions? PLEASE!!!!!
Could the video be too big because of using too high a resolution? 480p is sufficient for a DVD. the thread at:
https://discussions.apple.com/thread/5868958?tstart=30
may be of help.
Apple does not support Blue ray - you have to use a thrid party application like Toast.
To transfer the video to a PC you need a FAT-formatted hard drive (or of course a sufficiently big memory stick).
You could also go via a network, via the cloud (eg Dropbox) or with 'Wetransfer" or similar.
Geoff. -
i have an iphone 4 with ios 5.1.1 and i want to upgrade it to the latest ios 6 and not 7 because its too heavy for iphone 4 how can i do it?
You cannot. When you upgrade, you will get the latest version of iOS 7.
-
We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder?
We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
Anyone else got that too with Premiere Pro CC and the new Media encoder?
Lack of detailed info makes your question impossible for anyone to answer you!
eg. ...."Doctor it hurts...anyone else got something that hurts?" -
Can't open a document I created an hour before with Pages 5.0.1; get message saying my Pages is too old, for me to download 5.0.1
You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 90 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter -
Question:
The hotkey for Private Browsing (<CTRL><Shift> <P>) interferes with another program I have running in the background. Is there a way to disable or change the Firefox Hotkey?You can try this extension:
*Customizable Shortcuts: https://addons.mozilla.org/firefox/addon/customizable-shortcuts/
Maybe you are looking for
-
ADplugin-how to populate Fullname in BO
Hi all Im on XI3.1 SP3, and have a working clustered environment, with AD-authentication. The problem we have, is that the BOuser and the BOfullname, is identical. In AD, the users have a describing name, like user "uu12345" is described as "Joe Smit
-
Backing up my ipod touch w/ 4.0 update
i have been trying since sat. to complete the update 4.0 for my ipod. i have installed the update and it says i have to sync or backup my ipod, however, 5 hours later the green bar was maybe half an inch completed. can anyone tell me how long it's su
-
Create Asset through WBS/Network
Dear All, when we create a Asset PR through WBS or Network it is not Updating in Commitment cost, against PR i created PO and then did GRN, but it is not Updating in Actual cost also for the given WBS So how to create Asset through WBS kindly sugg
-
Native Supplicant "NAK requesting to use PEAP instead"
Hello, We have a Cisco ISE infrastructure in place and we're experiencing seemingly random occurrences of users failing authentication because they're trying PEAP vs EAP. Does anyone know if it is possible to force the native Windows supplicant to us
-
Hi all, 11.2.0.1 I have departments in table DEPT which are 10 and 20. Department 10 has 100 employees in EMP while Department 20 has none in EMP, so it has no matching rows. How can I create a query such that all dept with no EMP will be displayed: