Is-32-900-Tvbu - Getting the surround sound to work with this TV

Can anybody help??
We have just bought a Is-32-900-Tvbu ISIS TV from Best Buy but we have tried wiring up our speakers and no sound is coming out of them. I dont know much about Sound Sytems so bare with me, but there is nowhere in the back of the TV to connect the speakers directly so we had the speakers conencted to a Stereo and then a lead from the Stereo to the TV (the one with the red and white connections). This worked fine on our old TV (one of the ancient bulky things) but doesnt seem to work now. The speakers work fine so its not them.
I have tried playing around with the Audio settings on the TV but nothing i do seems to make any difference.
Do you think this is a fault or am i doing something wrong??
Thanks for your help

With that TV, I believe the only audio output that it gives you is through the SCART connection. I might be wrong though. Does your stereo have a SCART connection? I've only worked with this connection once so I'm not completely farmilair with it but, I think this would be your best conneciton for audio. If your Stereo doesn't have this connection there are addaptors you can get. It's called is a Multi-AV SCART adaptor with input/output signal switch..... I think.

Similar Messages

I can not get 3D surround sound to work with my X-Fi and headhones please he

I have an X-Fi Xtrememusic soundcard and I have been unable to get possitional sound working consistantly with two sets of stereo headphones. I have the latest drivers installed and have creative audio console set to: headphones, game mode, CMSS 3D and I still have no possitional sound at all. Noises seem to come from above my head I can't tell right from left or forward from backward in other words I am completely lost as to were sounds are coming from in games. I used to be able to get possistional sound to function by changing headphones in the creative audio console to 2. or 4. speakers.
If I set the mode to 5. or higher the sounds in games (footsteps, weapons fire) would become heavily muted and hard to hear while I would gain better positional sound for other players and now this does not work at all. I have also tried disabling sync to windows control panel and changing its sound options and there have been no beneifts from doing so. In settings other then stereo headphones no sound was produced at all while others stopped sound coming from one of my headphone speakers. I am at a total loss I can not think of anything thing else to fiddle with.
My system specs: Athlon 64 4000+ San Diego, ASUS A8N-E mobo, 2GB DDR400 2.5CAS Buffalo ram, EVGA 7800GT CO, X-Fi Xtrememusic. No popping or crackling sound at least. Thank you you reading this.
<SPAN class=time_text>
<SPAN class=time_text>
<SPAN class=time_text>
Message Edited by Blah-and-Feh on 04-5-2006 :50 PM

Hay everyone thanks for the advise but i was finally told by one of the support personnel that I actually need the dri've bay insert that comes with the fidelity in order to get the cmss 3d to work with the headphones.
I only purchased the extreme gamer not the extreme gamer fidelity and that is why i cant get the cmss 3d to work but it still advertises on the box that you can use the cmss 3d and get that feature. :angry:? Should have done homework but i was out Christmas shopping and i went off of what the box advertised. This is very unusual for me to shop compulsi'vely. The funny thing is that everything else on the box that is advertised such as the increase of the CPU and the EAX HD features are able to be used. Im very upset about this because I particularly bought this card for the cmss 3d. I really don't know if i will ever recommend another Creative Product to any of the people i do computer repair or gamer builds for, unless this gets resolved and the only way to resolve this is to get the cmss 3D to work. By the way I did do a full reinstall even with clean boot so that isn't the problem. I'm really upset and ready to return this product to Best Buy unless this can be resolved. Any admin that comes across this please send me any ways of getting a hold of anyone that can help. Tks and hope yall had a wonderful Thanksgiving.
Creatively toastedMessage Edited by toast on -24-200608:48 PM

How do i get my surround sound to work with my laptop while using a hdmi cable for the video

I have a Sony surround sound system hooked up that works great. My X-Box 360 works with it and I can get my HP G60 to play audio files through the surround sound system with a red and white audio jack plugged into the back of my surround sound receiver, the red and white audio cord goes to a 3.5mm headphone jack that i plug into the headphone plug on the front of my computer. The problem occurs when I hook my HDMI cable into my computer and connect it to my Samsung Flat screen, the HDMI sound takes over and wont allow the sound to go through the headphone jack. My tv does not have any audio output plugs, and my suround sound reciever doesnt have an HDMI input. Is there a setting on the computer that will allow me to over ride the HDMI sound and direct the sound through the head phones? or is there an app or tool that will allow my laptop to recognize my suround sound system plugged into my laptop? I have been to best buy, walmart, radio shack and even my local car audio store to ask about this issue and everyone has a different solution, and so far none of them have worked???????? sincerley frustrated! please help!?!?!?!?!?!?!?!?

Hello JaeRoc48,
I understand that the sound is not working.
Go to start.
Type Sound.
Select sound.
Select speakers as default.
Click OK.
Let me know how everything goes.

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Welcome to the Apple Support Communities
AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
You have two possibilities:
1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

Can't get the zte mf627 to work with 10.9.2

Hi I have an older 3 ZTE MF627 3G dongle. Cant get the loaded software to work with 10.9.2 on Macbook Air. Also cant find a download for new sofware for it to work....

All USB network devices are to be avoided, if possible. They depend on complex third-party software that's often of poor quality and is prone to cause system instability. The software is rarely, if ever, updated, and may stop working entirely when OS X is updated. Use a mobile Wi-Fi or Bluetooth hotspot, either a mobile phone or a dedicated device—no software needed.
If you have no choice but to use the device, your only recourse is to the vendor.

How can we get the web cam to work with sykpe or any out going calls

can get the web cam to work with skype

Hey there,
What model laptop is this? Are you using the built-in webcam or is this a external web cam? Also what operating system are you using?
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How do I get the new iPod to work with iTunes

I recently purchased a new iPod--I think it's the "Shuffle," whichever one retails for $150. When I plugged it into my iMac, it said I needed to install iTunes 10 to run it. When I checked for updates, it said that iTunes 9.xyz (whatever came after the 9) was the latest version.
How do I get this new iPod to work. As you can tell, I am not much of a gadget junkie, and I'm a bit of a technology incompetent, which is why I purchased the Mac to begin with. I have an iMac, have no idea what operating system I am using--whatever came with it when I purchased it in November, 2008.
TIA!

Okay, I just looked and I do have 10.411. How do I upgrade to get the new iPod to work, and how much does the new operating system cost?

[solved] Getting the mouse back to work with slim, openbox and tint2

Hey guys,
I did a fresh installation of Archlinux yesterday, installed firefox, thunderbird, steam and stuff and it all worked fine, until what I will explain next.
My installation is slim + openbox + tint2.
Nothing from the start is launched via ~/.config/openbox/autostart but everything I wanted to launch is launched via the ~/.xinitrc which looks like this:
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
if which tint2 >/dev/null 2&1; then
(sleep 2 && xcompmgr) &
(sleep 2 && tint2) &
fi
xscreensaver -no-splash &
nitrogen --restore &
volumeicon
nmapplet
exec openbox-session
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
This is the status quo .xinitrc before there was
case $1 in
openbox|*)
exec openbox-session;;
esac
instead of
exec openbox-session
with
login_cmd exec /bin/bash -login ~/.xinitrc %session
and no predefined session, which worked very well.
I did not touch the rc.xml until I wanted to make htop as my desktop background like descriped in here. https://wiki.archlinux.org/index.php/Op … background
Yes, the idea with htop does not yet come from there and did not work out well. So I wanted to withdraw all these changes and found the desktop starting slower and without any working mice.
I had deleted the entry at the rc.xml and the .Xdefaults file mentioned there.
Status Quo is the .xinitrc given above, a reinstalled openbox with
$ cp /etc/xdg/openbox/{rc.xml,menu.xml,autostart,environment} ~/.config/openbox
, I also did not touch the tint2 and tint2config.
So how do I get the mice working again?
I would love to thank you for your help, I do not know what else I could do.
tl;dr everything worked fine until I wanted to get a terminal as background.
PS. This is my first installation of archlinux following the german beginners guide found here:
https://wiki.archlinux.de/title/Anleitu … Einsteiger
EDIT: Ok, I solved it by reinstalling and reconfiguring alls componoents up from the xorg-server. It works fine again now. Also I do not get WHY it did what it did.
Last edited by rc0nnect (2013-08-31 08:52:47)

With that TV, I believe the only audio output that it gives you is through the SCART connection. I might be wrong though. Does your stereo have a SCART connection? I've only worked with this connection once so I'm not completely farmilair with it but, I think this would be your best conneciton for audio. If your Stereo doesn't have this connection there are addaptors you can get. It's called is a Multi-AV SCART adaptor with input/output signal switch..... I think.

I need version 3.6.16 for an at home online job. I am unable to find it anywhere from a secure source. Is there a way to get a link to download it? The ChaCha Toolbar only works with this older version. Thanks!

I need the older version 3.6.16 for my at home based job for ChaCha. Their toolbar only works with this version and they say it is more compatible with this. And I have not been able to find a secure link to download this older version. Can you give me a secure link or is it possible to download this older version securely?

If you only need Firefox 3.6 for just one thing then you may be better off using a portable version of Firefox as it will not impact your Firefox 6.0.2 install. You can install it on hard disk or on a usb flash drive. Firefox 3.6.22 is the current security update as 3.6.16 is old.
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Does anyone have a fix for getting the facetime camera to work with Skype?

I have been trying to skype with my daughter on my iMac, intel. I've downloaded 7.0.02 ... the newest OS. The camera will not work with Skype. Any fixes yet, Apple?

Have you posted this in Skype forums?

Need help getting my surround sound to work when watching TV

I recently got the Samsung Blueray Home Theatre system and it works fine while watching movies, but I can't seem to get the system to work while watching regular tv? Any ideas?

In order to get sound while you are watching braodcast tv or satalite you have to route the sound to your receiver some how. If you use a external source for watching tv, like a digital cable box or satalite receiver you will have to run the sound to your receiver from that component. A digital connection would be best so your receiver can decode dolby digital if its available for the program you are watching. And optical cable, digital coax (looks like an RCA cable) or HDMI if your components utilize it. For the HDMI you would need to have an HDMI out on the cable/satalite box and a HDMI input on the stereo receiver.
If your not using a cable or satalite box then you need to run an optical cable from the optical out of your tv to an optical input on the receiver.
Without knowing exactly what components you are using its hard to say which would be the best way to hook it up.

How to get Surround Sound to work With Itunes 7 and Stop Skipping

A common problem for surround sound with itunes 7 appears to come from Creative sound cards. The way to fix this problem is to right click on the volume icon in the taskbar and open the EAX Console. Open the CMSS 3D tab and check the box that says Enable CMSS 3D and set both CMSS and CMSS2 to 0% in the stereo focus slider. It should work. Remember to have the volume slider in itunes at 100%.
If that doesn't work then open the quicktime preferences in the controlpanel/quicktime. Then go to the audio tab, uncheck the safe mode box. Set the rate to 64 kHz and the size to 16 bit. Then set the channels to 5.1
This should all make it work, after hours of struggling i've found these successful settings and am loving it!
For those of you who have sound skipping during transitions----
Go to the preferences of Itunes and go to the Playback tab, disable the crossfading between songs and you should play skip free!!!!

bump

How do you get the ringer sound to work in Face Time for incoming call on my IPAD 2?

How do you get the ringer to sound on my iPad 2 when a face Time call is coming in?

iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

MUSIC VIDEO -SURROUND SOUND NOT WORKING WITH 7.0

My surround sound 5.1 does not work with downloaded music video playblack on windows iTunes 7.0. It used to work before I updated to 7.0. At first, my surround sound would not work with 7.0 for any iTunes songs, not just downloaded videos. However, that was corrected with the version 7.0.1 update. However, surround sound still does not work on videos I am trying to play back. This includes music videos that I purchesed both before and after downloading iTunes update 7.0.1. Has anyone got any suggestions for how to fix this problem so that my surround sound 5.1 will work on playback of the music videos?

I have an Airport Express that is linked to my TV. It is interfaced to my Denon AVR. To get surround sound I had to just select the correct output option via the Denon. Then the speakers set up for SS would work.
MJ

Is-32-900-Tvbu - Getting the surround sound to work with this TV

Similar Messages

Maybe you are looking for