Is 4G service Down in Tucson, AZ? Only getting 3G service for the past 2 weeks in Tucson, AZ.
Called customer service and they it's because Verizon is installing 4G XLTE. I asked when Tucson's 4G would be restored and was told they couldn't give me a date. I have not seen any announcements that we would lose 4G during the transition. Is anyone else in Tucson experiencing this or is it just me? I have a Motorola DROID RAZR
Ahhh makes me wonder now. So maybe that's the real reason for my 4G loss? My SIM card has failed? It's likely 2 or 3 years old. Is that the average life? I'm assuming then that the SIM card can fail in this area but still work otherwise (storing pics, etc) since I've got no problems there.
Similar Messages
-
I had hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now it is looping on 4 items to delete for the past 2 weeks. I can't reboot, reload, or restart. I have to let the battery run down for it to turn off. I think a big part of the problem is that someon one the internet (the hacker) was mirroring my hard drive. It seems to have locked up my system. I could be wrong about this guess, though. All I do know is that it is now looping on the last 4 iems, and I can't do anything.
Well, I can get it to turn on, but all it does is continously try to delete the last 4 items. When I try to reload Snow Leopard, it tells me my hard drive is full and that I need to delete items.
Can anyone help? I am so lost without my Mac. I am back on the PC, and though it works, I'm sure many of you will understand when I say it's just not a Mac.
Thanks.I installed Snow Leopard using my Apple external Superdrive. I followed directions I found on the Apple site. Here is the article info: Mac OS X v10.6 Snow Leopard: How to Erase and Install
Article HT3910
located at: http://support.apple.com/kb/HT3910
Everything was going smoothly until I got to the reinstall part. I had to choose to reinstall on a hard drive or network drive. I've never used a network drive; just the hard drive. It seems that's where the troubles began. I selected the hard drive. It seemed to go well, and then I got the message that I needed to delete some files because I was out of space. I chose to get rid of my music files, but, there were only 636. I don't know what the rest of the files were. I was using the Secure Empty Trash command.
That was my first time doing an erase and install. I tried to do it again, but I now get a continuous error telling me that my hard drive is full and I must delete files. Only I can't delete files because 4 files are still being deleted and my computer won't let me stop the process.
I found out about the hackers mostly by the fact that whenever I used to watch something like Hulu or Netflix, I never had problems with internet connection or speed. Lately, I had internet connection problems. I went in to check my settings for my internet provider and found out the settings had been changed to public and all these extra computers were connected to my network. -
Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.
Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks. If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?! I've rebooted the iPad & my wireless card several times but neither action helped. Have any clue what I should do now?
-
I have a ipod classic 5th gerneration. Is there any way I can get a new battery for it? Or does Apple only get new batteries for the 7th generations? Thanks
Yes you can still purchase replacement batteries your iPod from third party repair companies. Apple does not offer replacement parts.
Do a Google search for iPod battery replacement and you should get a plethora of results. There are many good deals on Amazon and eBay.
B-rock -
Terrible service for the past few months, trouble ...
Hi all,
I'm hoping I may be able to get more help here.
For the past few months my phone line has been incredibly crackily and faint, my broadband (not with BT) has also been cutting out for long periods of time making it almost impossible to use.
About 2 months ago an engineer came out and supposedly fixed the fault (I'm not even sure if there was one to fix) only a day later it was back to being crackily and faint.
I called up numerous times and did online fault checks, and nothing came of it, they said there were no faults!
During the past few months I noticed that when the weather is bad (wind, rain, wind and rain, frost) my phoneline is terrible and my broadband connection is non existent. I kept note of this and yup, everytime the weather is bad, so is my broadband+phoneline. It's completely fine when it's dry and calm out.
I contacted BT again (multiple times because the service is terrible) and they said there isn't a fault with my line and that I should call my ISP.
Today I called again because the phoneline was terrible as is the weather, they called my mobile to do a linecheck on the landline, then 2minutes later they put the phone down on me and never called back. I had waited over 30minutes just to get through..
It seems like I'm never going to get this fixed as it's almost impossible to deal with BT on the other end of the phone, and I can't do a fault test online because my internet is dead during the times it is bad..
I also reported that the wire connecting from my house to the telegraph pole is all loose and looks unravled, but they obviously didn't think it was a problem because they wouldn't send anyone out for it.
What am I to do?I called 151 and reported the fault, they found nothing wrong. As it's intermittent they are going to run a 24hr line test and then get back to me (though he said he'd call in the morning to let me know if an engineer needs to come out.. 24hrs?) fingers crossed the weather is absolutely abysmal tonight!
@HHGTTG If it eventually gets fixed, I'll probably always be waiting to let out a sigh when I see that the weather is bad. Haunted! I hope you're in the clear now.
@surfer157 Perfect, I just bought my nephew a land telescope for his birthday, now i'm going to scope out the wires if nothing comes of the 24hr line test!
My wire is all loose and looks like it has come unravled at the telegraph pole compared to the others that look like they are pulled tightly, so I'm pretty confident it's a similar, if not the same problem you had with a corroded wire. Not confident about getting it fixed anytime soon though... -
After an import of about 20 black & white photos to iPhoto I was editing one when iPhoto shut down. The "unexpected shut down" message was displayed. I clicked reopen, which it did. However, my last import was completely missing. Not only that, everything I had imported, adjusted and filed for the past 2 weeks was also missing. It has still saved all of the albums I created but all show "no photos".
When I try to re-import from my back-up, iPhoto says "can't import, photo is already in the library".
Can anyone help?What version of iPhoto?
Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
RV042 - I have customer who upgraded to 20 meg cable internet service and can only get 10 meg thru the router. The customer had upgrade to a 20 meg cable internet service from a 10 meg service. The customer is only able to get the 20 meg service going from cable modem to PC. If he goes thru the RV042 router, he is only getting up to 10.7 down and 1.37 up. Additional steps taken….He had a Linksys SRW224P switch connected to the RV042 router and we had disconnected this switch for testing purposes. We performed the speed test again and we get the same speed results so we know the switch is not the issue.He had upgraded to firmware version 1.3.12.19 – TM Feb 13, 2009 – tested speed and no change.We accessed the web management interface and tried several modifications. This includes the following…..- We disabled the firewall – no change- We disabled SPI with is the Stateful Packet Inspection (I was thinking this one would do it) – no change in speed.- We disabled DoS (Deny of Service) – no change.- We set MTU to Manual and tested various byte increments based on MTU ping testing. – Once again, no change in speed. He is NOT using Load balancing on the routerHe has NO access rules but does have a few port forwards. Finally, with each change, he is saving the changes on the router.
You are expecting 20MB throughput on a $150 router? Well, ok, maybe.. Can you check on your router or switch if the port is set or auto negotiated to 10 or 100? That could explain 10MB limit (although technically a 10Mb port is considered 20Mb theoretical max throughput as 100Mb port is considered 200Mb per Cisco). So maybe you ended up with 10/half somehow? MTU 1500 would also be good for that connection I think and to try to get max throughput.
-
Help!! I'm using a Mid 2012 MBP retina 2.3Ghz i7 with 8GB of ram 256SSD. for the past 2 years my write speeds has been consistently on 400MB/s and up via black magic test. but now it only have 100MB/s going down to 80MB/s. what should I do???? I have already cleaned and even restored my MBP still it's on 100MB/s. please help. I have to finish tasks on a timely manner.
No. This requires completely repartitioning the SSD. You can do that only by using the Network Recovery method or the method I outlined. My method preserves all your data and doesn't require doing a slow Network Recovery. But if you wish to do that instead. The purpose of the whole exercise is to "clean" the SSD of garbage collected during use that tends to cause the SSD to slow down as you've described.
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Security button. Set Zero Data - one-pass, click on the OK button. Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. -
I have 2 email accounts on my computer - work and home....I find that I can only see the past few weeks worth of email messages in either account, and the same is true in the "sent" box. How do I change my settings so that all emails are readily visible to me, or do I have another place to "go to" to find them?
You can use an email program (e.g. Outlook Express or Windows Live or Thunderbird) and disable HTML for that email (text only mode) to access the email account. You can create a new email account if your your ISP supports it or use a online service that allows POP3 access with an email program (most popular services allow that).
-
Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint. -
After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?
Welcome to the Apple Community.
Which OS are you using. -
I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process. -
I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing. -
Where can we get the list of predefined services for the notification of events/signals
We have a sample plugin docwatch which uses the responder to notify in case a new doc is created/saved/doc closed etc.
I want to know if I can get the similar set of services for the text frame
eg: Typing a text should generate the notification
Deleting a text shoud generate a notification( in the form of alert window or something)
Also, for pages,frames etc.
Where can we check the list of default services available for these or can we do it some how in code?Hi Eton,
To check the instances which have ran today, you can use the below query in query builder.
SELECT SI_NAME,SI_ID FROM CI_INFOOBJECTS WHERE SI_INSTANCE=1 AND SI_STARTTIME > '2014.08.20 00:00:00' Order by SI_STARTTIME DESC
To check the instances which would be running in the future, that means you have recurring schedules. Check for the SI_NEXTRUNTIME to get the details of instances which will run in the future as per the recurrences.
Thanks,
Prithvi -
In Aperture 3 when I right click on an image I am able to 'create new version from original' which suggests that the original is there. When I try to export the original I only get a .jpg with the XMP file. These particular images are from 2010, has the RAW file become disconnected somehow? Please, how do I get access to the RAW file for editing in Ps? Thank you. Thomasrevil.
Sorry leonie, 'Use RAW as Original' is not an option for the image shot with the Canon.
Then your Import settings must have been different, when you imported the Canon photos.
You can check, if there is still a hidden raw file somewhere. If the image has been imported as a pair, you should see the "J" badge in Browser and Viewer, if you enable badge overlays. This indicates a pair, with the jpeg as original.
Select one of those images, and then relocate the original files "File > Relocate original" to a folder, where you can inspect it. Use "File > Show in Finder" after ward. Look, don't touch .
Then put it back, using "File > Consolidate".
Do you see your raw files in the folder, or is only a jpeg there?
Maybe you are looking for
-
I recently lost my iphone to which had of alot purchased music on it, but when i've come to retrieve the music from my itunes and the music is not there? The purchases show on my history but the music is nowhere? How can i get my purchases back ple
-
Recover deleted video from iphoto
hi i accidentally deleted my recorded videos from iphoto on macbook pro , then i changed the os version from snow leopard to mountain lion , can anyone help me with the procedure of recovering the deleted videos.. they are emotional and personal mome
-
Delete blog in iweb which acts as index to whole website
Does anyone know if I can delete one of my blogs on my website which acts as the opening page of the site, in other words as the index? My files got corrupted, and although I've gone to .mac and downloaded the whole site, I can't make iWeb see the fu
-
Table field sorted automatically
Hi Experts I have a field ZTNAM in table ZLIST as primary key. Its data type is CHAR. Since we set as a primary key, the data sorted automatically in database. My requirement is, i need to set the field as primary key
-
Please help me in finding a FM for curency conversion regards, kushagra