Is $99 sign up required before you can test code on a device (iphone/itouch

Hi
Is the $99 sign up required before you can test code on an iPhone/ Itouch device?
I am just trying to compile a simple program and run it on the device, but I get a CodeSign error. Is Codesign something that can be done without signing up for $99, or is there a special code given during sign up to use unique to the developer? Just want to test code on a real device, not in the simulator. Seems a bit much to require me to pay a $99 fee to do so if I'm just writing stuff for myself at this point.

Even after paying the $99 fee, I don't believe this provides for being able to install your own developed app on your iPhone - not via the simulator only, or does it?

Similar Messages

  • I can´t rent movies on Apple TV I keep getting this message: Verification Required Before you can make purchases, you must go to the ITunes Store on your Computer and verify your payment information.

    I can´t rent movies on Apple TV I keep getting this message: Verification Required Before you can make purchases, you must go to the ITunes Store on your Computer and verify your payment information ? Done and still aren´t able to rent.

    Hi.
    You will need an iTunes acount !! then just log in to it and confirm your card payment details.
    I've don the same think!! good luck!  it works for me.

  • I am trying to rent a movie on my Apple tv keep getting the message - verification required before you can make purchases you must go to the itunes store on your computer and verify your payment information

    Hi  I am Del
    I am trying to rent a movie on my Apple tv keep getting the message - verification required before you can make purchases you must go to the itunes store on your computer and verify your payment information
    Thanks

    Have you paired your Apple Tv with your iTunes account?  That's how rentals and purchases are billed.  If, however, you have already done that it is possible that there is a glitch in the system.  I've had that happen occasionally and it usually goes away if I reset Apple Tv.  On one occasion that I didn't work so I had to go to iTunes and deauthorize and then authorize this computer.  Also, check to see if your Home Sharing is on (under File in iTunes).  Hope that helps.

  • TS1702 Why am I getting "verification required before you can make a purchase on a free app?

    Why am I getting a "verification required before you can make a purchase" on a free app?

    because its per terms and conditions of itunes.  use a gift card if you dont have a credit card
    Peace, Clyde

  • Is the SCJA certification required before you can be SCJP certified?

    Hello,
    my question is, do I have to be SCJA certified before taking the SCJP test?
    And if it is not required, do you suggest that I take SCJA anyway? It seems to me that if you're SCJP certified, then chances are you probably already know the Associate stuff.
    Thanks!

    You don't need to do SCJP before SCJA
    One thing I've seen is people doing SCJP on 1.4, which is an easier exam than 1.5, with a lower passing score (52%).
    Then, you get your SCJA on Java 1.5, which is the only version it is currently out on. Then you can brag about being certified by Sun on both Java 1.4 and Java 1.5. It looks great on a resume, especially if you're looking for a Java job.
    As far as SCJA mock exams go, or even some free tutorials on how to get Sun Java Certified, check out the following links:
    http://studyguides.scja.com/ExamScam/sunjavacertifiedtutorialsandmockexams.jsp?link=mockexams
    http://studyguides.scja.com/jsr168/ibmportalcertexam399.jsp?link=mockportalexamsmockscjaexams
    Enjoy!
    -Cameron McKenzie
    http://www.scja.com
    http://ww.portorials.com
    http://www.scwcd.com

  • Hi - I keep receiving the following error message on a song I purchased from itunes and am now trying to drag and drop to my iPad: "you must download items from icloud before you can copy then to iPad" what does this mean - please help! Thank you

    Hi - I keep receiving the following error message on a song I purchased from itunes and am now trying to drag and drop to my iPad: "you must download items from icloud before you can copy then to iPad" what does this mean - please help! Thank you

    Hi Poonam26c,
    If you do not have a local copy of a song which you have purchased (i.e. it is available via iTunes in the Cloud), you may need to redownload it before you can transfer it to your device. You may find the following article helpful:
    Apple Support: Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Regards,
    - Brenden

  • TS1702 ea game codes opo-up when redeeming "Before you can make purchases, you must tap Continue to sign in, then verify your payment info"

    Hi there,
    Not an urgent question, however I would like some help.
    EA Games ran a great promotion over the holidays that offered free iphone/ipod and ipad games. I won a few but have not been able to access the games due a weird bug. Everytime I attempt to redeem the code on my iphone in the app store or via Itunes app a pop-up appears "before you can make purchases, you must tap Continue to sign in, then verify your payment info." I'd happily click the continue button if there was one. But there isn't. I click on for the pop-up to move on and I'm back at the screen that asks me to redeem. Which I do and the pop-up returns. I'm fully logged in my payment method works for other app purchases or updates but not these EA codes. Very odd.

    There are user-to-user public forums, you're not talking to iTunes Support - I've asked the hosts to remove your account id and password from your post, but you should change your password IMMEDIATELY.
    If you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Hi,each time i`m trying to update any program in my phone i got this messege(before you can make purchases you must tap continue to sign in,then u must verifty your payment information),and i wanna it for free,what i have to do please?

    hi,each time i`m trying to update any program in my phone i got this messege(before you can make purchases you must tap continue to sign in,then u must verifty your payment information),and i wanna it for free,what i have to do please?

    There are user-to-user public forums, you're not talking to iTunes Support - I've asked the hosts to remove your account id and password from your post, but you should change your password IMMEDIATELY.
    If you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • "you must authorize this computer before you can download previous purchased"

    HELP!!
    All my purchased music from iTunes will no longer play on my iPhone 5.
    When I go to iTunes to my purchased I go to re download it all but it says “you must authorize this computer before you can download previous purchased”
    I recently got a new PC which I am using but my apple ID and p/w is correct.
    How do I fix it so I can re download all my purchased music???

    If you are using a new computer you need to authorize it.
    Authorization and Deauthorization
    Macs:  iTunes Store- About authorization and deauthorization.
    Windows: How to Authorize or Deauthorize iTunes | PCWorld.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
    More On De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

  • How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows.  The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

    I cannot make these directions work
    I downloaded media on Overdrive MEdia on my PC
    I have the overdrive media ap on my I pod touch 4g
    this media is suppossed to be compatible w/I pd touch
    Notes on Transferring OverDrive MP3 Audiobooks…
    Most MP3 capable devices should play OverDrive MP3 Audiobooks.
    If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
    iTunes® v9.0.2 (or newer) is required.
    The Apple device must be formatted for use with Microsoft® Windows®.
    The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
    Connect the iPod® to your computer.
    If it does not launch automatically, open iTunes v9.0.2 (or newer).
    In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
    The 'Summary' screen is displayed. 
    Place a checkmark next to 'Manually manage music…'.
    Click the 'Apply' button.
    The iTunes 'Summary' screen refreshes, and the changes are saved.
    If desired, close iTunes.
    Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    Also you said " I want to add them to my iCloud, and also back to my computer.   " Note that unless  subscribe to iTunes match, only iTunes purchases are stored in iCloud.
    Also,
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

    Fresh installation of Exchange Server 2013 on Windows Server 2012.
    Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
    your folders with your Outlook data file (.ost)" is displayed.
    If I turn off cached Exchange mode, setting the email account to not
    cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
    time.
    I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
    Microsoft Exchange RPC Client Access service is running.
    No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
    Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

    So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
    Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
    First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
    Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
    This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
    work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
    In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
    up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
    like OutlookAnywhere - which I might add had their place under that scenario.
    In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
    previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
    EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
    So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
    but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
    users.
    Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
    Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
    certificate.
    See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
    So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
    Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
    always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
    This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
    there is a 3rd - I forgot, but you get the idea).
    Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
    the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
    Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
    NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
    Open Outlook - BOOM! It works... Was it as good for you as it was for me?
    You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
    and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
    So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
    Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
    So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
    SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
    Frustrating beyond reason - that should be Exchange's new slogan...
    Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
    PS
    ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

  • Another user of your computer is currently using this connection. This user must disconnect before you can log on.

    Hello
    I have a single computer that is going to be shared between 5 people. In an effort to save time. I wanted the users to have a single shared LOCAL login to the computer.
    Then each user could pull up an RDS session through RDWEB on our 2012 r2 RDS farm.
    However, when I attempt to log in more than one user through RDWEB I receive:
    Another user of your computer is currently using this connection. This user must disconnect before you can log on.
    I have done some research on this, and followed this advice, and did the following steps on all my RDS session host and broker servers
    Enable Multiple RDP Sessions
       -  Log into the server using Remote Desktop.
       - Open the start screen (press the Windows key) and type gpedit.msc and open it
       - Go to Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections.
       - Set Restrict Remote Desktop Services user to a single Remote Desktop Services session to Disabled.
       - Double click Limit number of connections and set the RD Maximum Connections allowed to 999999.
    However, it did not solve the problem. Anyone have suggestions?

    Hi Michael,
    In addition you can try below registry setting for multiple remote session.
    HKEY_Local_Machine\SYSTEM\CurrentControlSet\Control\Terminal Server
    fSingleSessionPerUser     REG_DWORD     0x00000000
    Note: By default the registry value is set to 1, but you need to change to 0.
    Also if you are making connection through gateway then recheck whether the setting is enabled on gateway side for multiple session.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How many times do you get a new iPhone because of manufacturing  defects, before you can ask for an newer model?

    How many times do you get a new iPhone because of manufacturing  defects, before you can ask for an newer model?

    yofromoslo wrote:
    How many times do you get a new iPhone because of manufacturing  defects, before you can ask for an newer model?
    You don't.  Apple's warranty provides for replacing your device with an identical model (same model, carrier, capacity & color).
    And you aren't getting a new iPhone.  You'll be getting a remanufactured iPhone, which has gone through a more thorough inspection than any new iPhone ever does.
    If you want a newer model, then trade-in or privately sell your current device and use the proceeds towards purchasing another device.

  • I am trying to change my apple id Country. but it says " you have a store credit balance, you must spend your balance before you can change it." i don't wanna use it to change my country. by the way i can't update any of iPhone apps. need help

    I am trying to change my apple id Country. but it says " you have a store credit balance, you must spend your balance before you can change it." i don't wanna spend it to change my country. by the way i can't update any of iPhone apps. need help

    It's strange because I can change my AppleID country without this message.
    So what to do? Just try to do this again, but on another device. You may also erase cookies and history of your browser.
    I hope it will be helpful, good luck!

  • When connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?"

    when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please

    Hi Michael
    These are the answers
     to your questions
    What is the OS version, Windows Server 2008?   
    Microsoft Windows [Version 6.0.6001]  
    SP1
     On which disk you choose to install it, the C: drive? 
    I have Raid 5
    What
    is the output of the Checkdsk?   It find Nothing
    Could
    you please upload us a screen shot?  I have no 
    Screen shot
    Is
    the C: drive is a external drive?  NO
    Besides,
    have you manually assigned the drive letter? 
    NO
    Thanks

Maybe you are looking for