Is a clean install with target mode better than upgrade?

Hi, is it better to do a clean install of Leopard and then transfer my files through an external fw drive or do just doing a plain upgrade? I ask because I know how much smoother and snappier a system is with a clean install but I do need to transfer all my files somehow. Thanks
Message was edited by: bustardvan

bustardvan wrote:
Hi, is it better to do a clean install of Leopard and then transfer my files through an external fw drive or do just doing a plain upgrade? I ask because I know how much smoother and snappier a system is with a clean install but I do need to transfer all my files somehow. Thanks
I haven't gone to Leopard yet (my copy is allegedly due here sometime today or tomorrow) but I did an upgrade install on my home Macs for every new version of the OS since, well, forever. In the past there have been times when there was a problem, but few of them, and all cured by an archive install. I have never done an erase install.
YMMV.

Similar Messages

I need to do a clean install with Lion. How do I do this. I can't find any doc. to tell me the procedure.

I need to do a clean install with Lion. How do I do this. I can't find any doc. to tell me the procedure.

Follow the instructions at the link I posted
have a lot of old stuff transferred from Mac to Mac to Mac that is slowing down everything
If that included Power PC apps, read here > Lion upgrade questions and answers: Apple Support Communities

How to do a clean install with lion after it is already installed?

how to do a clean install with lion after it is already installed?

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

How to install a clean install with leopard upgrade DVD!

Does somebody know how to do an clean install with a Leopard upgrade DVD?
I bought my MacBook for 1 week ago, and them said that i would get leopard sent later. And when i get it, its a upgrade cd that i cant install only leopard on my ny frsh hard-drive. *** apple?

First, there is no such thing as a "clean install" option in OS X. But the "cleanest" install is to start with a reformatted drive (using Disk Utility's "Partition" tab), followed by an install of the OS that will be cleansed of any traces of OS or file system corruption. (The "unclean" options, "Upgrade" & "Archive & Install" won't be possible, & the erase part of "Erase & Install" is at this point redundant.)
However, if you use Setup Assistant (which runs after rebooting) or Migration Assistant to bring over copies of old system components, applications, & settings, you may be reintroducing something "unclean" from the old versions.
This said, if your up-to-date disk is just an updater (nobody seems to know yet), you can do a "cleanest possible" install by following the above with your original Tiger Installer disk, letting it reboot & not importing anything during setup, & then following the instructions supplied with the up-to-date disk to upgrade. At this point, you may want to clone the startup disk for future reference, before adding back in your apps & user files by whatever method(s) you chose.

Clean install with 29$ single?

Can the 29$ box do a completely clean install with just the snow leopard disk? I currently have Leopard installed to the latest updates and XP on a BC partition.

Thanks, but I have no problem booting the DVD that came with the box. Only the upgrade DVD.
I called the Apple store and they told me to return the product. That might also explain why the upgrade process went so quick (17 minutes) but utterly painful afterwards with dozens of kernel panics).

Clean Install with Lion on SSD

Hi,
Was wondering if anyone could provide me a step-by-step guide for a clean install with Lion on to a new SSD.
I have already self-made a Mac OS Lion Installation CD - will this self-made CD be the only CD I need for the clean install (or do I need to use the original CDs that came with my MBP purchase) The CDs that came with my MBP was the Mac OS 10.6.8 Snow Leopard (early 2011 model)
If the self-made Lion CD is the only CD I need - then my next question is how can I validate the OS version - I suppose there will be a content ID or some sort of key to ensure that the OS is a true copy? If a key is needed, how do I obtain that?
I was told that one can self-made a Lion Installation CD from a MBP with Lion OS on it and use the CD on all other MBP for upgrades to Lion - but again, there must be a license key to subsequent users, otherwise Apple would be losing money!
Thanks in advance for your response.
Chih

Hey Sam,
Thanks for your response.
Your response prompt me for another question - let's say I have multiple MBP, if I were to upgrade each MBP's hard drive to a SSD.
Will I be able to log in to my App Store a/c and use the purchased Lion OS (I only had one license) to upgrade all my MBP?
Thanks again.
Chih

Flashing Question Mark Folder after Clean Install in Target Disk Mode

I have an old iBook G4 with a failing optical drive and the need to reformat the hard drive and re-install OS 10.5.4. Since the optical drive is failing and unpredictable, I figured I'd do everything in target disk mode.
So I mounted the hard drive of the iBook to my Mac Pro via Firewire in target disk mode. I was able to successfully format the hard drive of the iBook, zeroing out all the data with 7 passes, and I was also able to successfully install OS 10.5.4 from my original Install DVD, again in target disk mode.
After the install was complete, I went through all the registration process and User Account setup and the iBook booted fine albeit still in target disk mode. So I shut down the Mac Pro, turned off the iBook and unplugged the Firewire cable. My Mac Pro booted up just fine afterward. But the iBook now gives me the flashing question mark/finder folder.
I know this means that the iBook is having trouble located a startup volume, or that the startup volume is corrupt or missing data. How can this be, though, after a reformat and clean install? Did I do something wrong in target disk mode? Or did I neglect to do something necessary?
Thanks for anyone's help on this.

Thanks, Niel.
I don't see APM as an option in Disk Utility when booting from my Mac Pro. I only have Mac OS Extended (Journaled), Mac OS Extended, Mac OS Extended (Case-sensitive, Journaled), Mac OS Extended (Case-sensitive), MS-DOS (FAT) and ExFAT.
How do I get my Mac Pro to repartition the iBook properly in target disk mode?

Clean install with nVidia 8800GT issue

I know that you either need a legacy graphics card or a 10.5.2+ installation DVD/CD to be able to do a clean install. There is a number of workarounds also and I used one of them. I restarted my MacPro in TARGET DISK MODE and connected it via FireWire 400 to my 15" MacBook Pro. I then successfully installed and updated OSX onto one of my MacPro internal drives. So now I have a clean 10.5.4 on my MacPro. But there is one issue/problem. My System Profiler now thinks that I have a MacBook Pro. How can I change that and if this is a problem or not.
TIA!

Little confused over here. Yes it was a clean install. I did not use a CD that came with neither the MacPro (because it would not run on MacBook Pro) nor the one for the MacBook Pro (because it is a Tiger CD). I used a 10.5 Retail DVD. After I installed it, I ran all the updates including hte 10.5.4 update. Only after that I could boot my MacPro using that hard drive. And now, it shows "Alexander's 15" MacBook Pro" in the system profiler. It does seem to show all the components correctly. 16GB RAM on a MacBook Pro? Haha, I wish.

How to keep a clean install with migration assistant

I have a mid-2009 13" MacBook Pro (5,5 - Intel Core 2 Duo - 2.26 GHz) with 8 GB RAM. I am currently running on OS 10.6.8 and want to upgrade to Yosemite.
I also plan to replace my original drive with an SSD.
I have had a series of Macs going back many years, usually getting a new one every few years and migrating everything from the old to the new. My Macs always start out fast but start slowing down within a short while. I was told this could be due to the fact that I am importing a bunch of old stuff onto my machines and that it would be better to keep the old stuff on a separate drive.
So I want to do a clean install of Yosemite and the small handful of other apps I need.
I will pull the original drive and put it in an enclosure and can either use it or my backup via Time Machine to migrate my files to the SSD via Migration Assistant.
What I am unclear on is what all I will want or need to migrate over, and what I want to avoid. I will bring my documents folder of course but I want to be careful not to bring over any unneeded apps, preferences, libraries, etc. Are there any resources for guiding me through the process? Is Migration Assistant the best tool for this?

Setting-up a new Mac from an old one, its Backups, or a PC

Windows XP 64 bit pro clean install with RAID

Can anyone help out???
I recently purchased a Lenovo Thinkpad W700 with the raid system (raid1) it had Vista Business pre installed but I wasn't impressed so I've cleared VB out and tried to install XP 64 pro I have followed the guide I found on this site http://forum.notebookreview.com/showthread.php?t=188992
which was very informative but didnt seem to include any details on a raid installation. If I change my BIOS Serial ata (sata) to compatibility I can install win xp and get it running but no raid!! if I try to install the Intel chipset driver it reports it cannot install!! If I set the Bios Serial ATA to RAID the setup goes so far through then I get the BSOD
I seems to me I need some raid drivers but have no way of installing them during setup (I dont have the drivers anyway!!)
Sooooo...........can anyone out there point me in the right direction for a clean xp pro install with raid?? theres a couple of beers in it!!
Lenovo thinkpad W700, Q9000 2.00GHz Quad Core 2x 160gb hdd raid1, 4gb ram, 1gb nvidia graphics FX3700m Fingerprint reader, Graphics tablet (digitiser?)
Windows 7 Professional 64bit RAID 1

I believe you need to install the Intel Matrix Storage Manager Driver for Windows XP, Vista (32bit) - ThinkPad. Installation instructions are on the same site. If you don't have a floppy you can streamline them onto an install disk.
Other drivers can be found here.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

How to change startup disk for a 2012 Mac mini with dual HDD and clean installed with Windows 8.1?

Hi,
I have a Mac-mini (late 2012 model), originally with Mac OS X Maverick Server installed (with two HDD). Recently, I had clean installed Windows 8.1 on one of the HDD (worked perfectly, just slow) and swapped the other HDD (with Mac OSX) with a SSD. I then cloned the Windows OS HDD in to the new SSD. Now I am trying to boot this Mac mini from this SSD, however, since this Mac mini do not have BIOS for me to change the boot sequence at the startup, is there any one can help?
Thank you,
Liusc

If you boot with the Option key depressed what boot options are shown?
Also:
Restart your computer
After Windows is installed, you can switch between OS X and Windows. Use the Startup Disk preference pane in OS X, or the Boot Camp system tray item in Windows to select your startup disk, then restart your computer
How to install Windows using Boot Camp - Apple Support

Macbook Pro with SSD (optibay) and HDD. Want to clean install with discs and move hard drives.

Hi all,
I have bought a used Macbook Pro 15' i5 Mid 2010 in brilliant condition. It came with original HDD in main Hard drive space and and SSD in an optibay. This all works fine and came with Mavericks already installed.
I want to start using the laptop like from new as there is nothing on there i currently need atm and dont want problems in the future with my apple id not being the original installer of mavericks. (had a similar problem previously on a used macbook white that had lion on)
What i want to do is erase and move the SSD to the main hard drive bay (have read this is preferred) and a clean install using install discs that came with it onto the SSD. Then install the HDD into the optibay or external enclosure and reinstall optical drive, not sure on that one yet.
My main questions are about the process i should use. There is nothing i need to back up or anything as this is effectively a new machine to me. Shall i simply erase the SSD (currently contains the OS) and install it in main hard drive bay and run install discs to install original OS (10.6.3)? Is it that simple? Any tips on erasing SSD would be useful also?
Also as the machine currently boots from the SSD that is in the optibay, is there anything that tells the machine to boot from that hard drive as apposed to the main HDD bay or does it just know? If there is, when i install the SSD into main hard drive bay how do i tell the machine i have done so and to boot from there?
The other thing i may do is buy a new SSD and do a new install on that and leave the current SSD in the optibay and use that for storage. Undecided on that yet.
Any help will be much appreciated. Thanks.
Sam

To do what you want, and the only way to do what you want legally and physically, you will need a set of Original System Reinstall DVD Discs. Without them you can't do what you want as the install of Mavericks that is now on it is TIED to the previous owners Apple ID and can not be transferred and or Reinstalled without knowing that persons Apple ID. And even iof you knew it it would still be TIED to that Apple ID and not yours.
So did the previous owner supply the Original System Reinstall DVD disc Set? If not you will need to order them from Apple.

Clean install with no OS X install disc

Due to glitches, teenager messing with settings, me messing with settings, internet connection probs, etc I think I need to do a clean install of my OS (10.6.8) but do not have the original OS install disc. How do I get a copy of that?

LowLuster wrote:
Hi Niel
What is that number that shows up at the bottom of all your posts? Is it the total number of posts you have made?
If it is how do you include that in your posts?
Thanks.
Niel wrote:
Phone AppleCare and order replacement original disks.
(83356)
Yes the number is the total number of posts he has made and it is added automatically, you don't have to do anything to make it happen.

Clean Install With Custom User Id

Hello
From experience I am aware of problems in our network when we have 2 users with accounts which have the same User Id. For this reason I have always tried to ensure each User on our network has a unique User Id.
I am upgrading several User's iMacs to Mountain Lion and I will format their drives and perform a clean install. Is it possible, using Terminal, to perform a clean install but specify a custom User Id?
Many thanks.
Chris

It would probably be easier to change your Apple ID password. This would allow you to continue downloading past iTunes/App Store purchases.
Apple ID - Manage
Do you have a backup? If not, backup before doing anything because an erase and reinstall will cause you to lose all your data.
If your MacBook came with Mountain Lion pre-installed, you would have to purchase a copy from the App Store, but you can probably avoid that.
Boot to the Recovery Volume (command - R on a restart) or hold down the option key during a restart and select Recovery Volume. Run Disk Utility Verify/Repair and Repair Permissions. Then select the Erase tab. Format is Mac OS Extended (Journaled). Erase and then reinstall the OS.
OS X Recovery
When you reboot, use Setup Assistant to restore your data.

Clean Install with Mountain Lion, including backing up files and Parallels

Hello,
I could use all the the advise I can get. Since switching over to the Mac, I have had to retrain my brain on how to do certain installations. I am planning on doing my first reformatting with an Apple and need some advise.
This is my current configuration:
OS X 10.6.8 Snow Leapord
Parallels 5 with Windows XP
My planned configuration:
Mountain Lion (clean install, no upgrade)
Parallels 8 with Windows 7 or 8
Here are my questions:
1. From what I read, I can download Mountain Lion and set it up on a flash drive from the disk utility. I have found some info on that and feel confident in doing so. When I reformat my machine, I do not want to reinstall Snow Leopard. Is the Mountain Lion downlad the full version? Is there no upgrade version, like Windows? Would I need to install Snow Leopard first? Anything that I need to know?
2. Assuming I successfully download and install a clean version of Mountain Lion, I would like to place my backup files back on my computer. For some reason, my Time Machine has been failing on the backups. I am thinknig that I need to get a new backup drive. Also, my backups have been occurring over my wireless network. I may plan on plugging the drive directly into my computer so that it copies over a lot faster. In order to completely restore all of my files carefully, do I run a successful backup of my computer with time machine and then restore it through the disk utility? Since I need to upgrade my Parallels, would I be copying over legacy Parallels files to my new install? If so, would those interfere with my new Parallels?
3. I am assuming that I will have issues reinstalling my old parallels and then doing the upgrade for the upgrade price. Would I have to purchase a full version on Parallels?
4. Any other advise that you can give? I really appreciate everyones help!
Thanks

E30 BMW M3 wrote:
Here are my questions:
1. ... Is the Mountain Lion downlad the full version? Is there no upgrade version, like Windows? Would I need to install Snow Leopard first? Anything that I need to know?
Yes. Mountain Lion you purchase through the App Store is the full version.
No. You do not need to install SL. But there must be a volume, on the internal hard drive, formatted HFS+ with GUID partition scheme.
You can also create or recreate the Volume/Partition launching Disk Utility during the setup process.
2. Assuming I successfully download and install a clean version of Mountain Lion, I would like to place my backup files back on my computer. For some reason, my Time Machine has been failing on the backups. I am thinknig that I need to get a new backup drive. Also, my backups have been occurring over my wireless network. I may plan on plugging the drive directly into my computer so that it copies over a lot faster. In order to completely restore all of my files carefully, do I run a successful backup of my computer with time machine and then restore it through the disk utility? Since I need to upgrade my Parallels, would I be copying over legacy
Parallels files to my new install? If so, would those interfere with my new Parallels?
3. I am assuming that I will have issues reinstalling my old parallels and then doing the upgrade for the upgrade price. Would I have to purchase a full version on Parallels?
Usually I manually recover my documents and preferences from backups. It may seem at first a long and tedious task, but I never had any major issues that other users had in upgrading.
I do have VMware Fusion. I installed only the latest version of the program, with new s/n licence. The first time I executed Fusion, the program asked me to update the old VMs, that I did.
I think you can do the same with Parallels.

Is a clean install with target mode better than upgrade?

Similar Messages

Maybe you are looking for