Is a lasso tool use for a part of design?

i have need of the part of design to take away. but i cant do it . i tried for the lasso,but not possible . is there any tool work ?

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

Similar Messages

  • What is Cinema Tools use for?

    I had asked this question in the Cinema Tools forum, but haven’t gotten an answer, so I thought I’d asked here.
    Can somebody explain to me what is Cinema Tools use for?
    I have been using FCP for some time now and have never open Cinema Tools
    What does it do?
    Thank you

    Perhaps checking the online help or the manuals would help. I can't give you a definitive answer, but let me tell you what I've used it for. Film is normally shot at 24fps. When it's transferred to video it's slowed down to 23.986 fps and then 3:2 pulldown is added (fields are repeated in a particular order) to change the frame rate to 29.97 fps without changing the speed. There are several reasons you might want to remove this pulldown and restore your film to a progressive 23.986 frame rate.
    I'd suggest opening the program up and exploring the menus and looking up any terms you don't understand in the manual.
    Message was edited by: Michael Grenadier

  • Some tools used for upgrade project

    Hi experts,
    I am looking for some tools used for upgrade project.What are the frequently used tools in an upgrade project.
    Regards,
    Kiran

    Hi,
    There is no specific tool for the upgradation. it dependts on organization. if it has developed its own tool means that is used for the upgradization. noramlly company gets the project based on the presentation of their tool.
    our company has a great tool for the upgradization. which find out all unicode related errors and changes that has to be done in new verion.
    like this each organization might havedeveloped their tools.
    Regards,
    Anki Reddy

  • Tool used for knowing the performance

    Which is tool used in oracle to know the performance of the query executed with time taken for execution???

    hi
    In SQL plus, please use the below command and then run the Query to know the time taken by the query.
    SQL>Set Timing on
    Regards
    K.Rajkumar

  • May i know which tools used for spell check in iphone 4..?

    Hi,
         I want to know what kind of tools used in iphone 4 for spell check. It works fantastic while typing messages and it pop up related words automatically..I liked it very much..So, i want to know what kind of tools they used to achieve this..
    Thanks..

    im pretty sure that it private information.  Apple doesn't want other companies knowing their secrets.

  • Tools - used for a successful SOA Project.

    Hi All,
    Can you tell me the list of tools, that can be used during implementation of an SOA project.
    Thanks in advance,
    Ganesh (g22sep)

    Hi,
    First of all, I think that the term 'SOA project' is a misnomer. There is no such thing. SOA is a state of mind
    You need to define what you want to do and then find the right tools for the job. For example, if your architecture states that you want to define all re-usable functionality as services (which is at the heart of SOA), then you need to find the appropriate tools to provide this service. You could code it using ABAP (then your tool would be the ABAP workbench) or you could code it in Java (then your tool could be Eclipse or NWDS). You would expose it as a web service... so your tool could be something like xmlspy to create the wsdl.
    In an SAP context, some of the common tools you would need to enable SOA would be the ESR, along with the Composition Environment for service consumption, provisioning or even composite apps.
    For service and process design, I use a tool for building UML diagrams and a tool for drawing BPMN -based process maps, and even Visio.
    I also use a wiki and a mind-mapping tool for personal productivity.
    But all of these could be used on any project, they don't have anything to do with SOA.
    Cheers
    Manish

  • Tool used for raising Tickets

    Hello everyone,
                             Can any one tell me the name of tools used to raise tickets.
    Thank you in advance,
    Cerlac.

    Hi,
    chkout for getting different ticketing tools.
    /message/7073544#7073544 [original link is broken]
    Thanks
    Ramakrishna.

  • Tooling used for the SAP Software Download Center (swdc)

    Hi,
    does anybody know what kind of software SAP uses for their SWDC? We're looking to offer simular functionality but do not know of any SAP product that does this.
    Cheers
    Marcel

    Hi Marcel,
    SAP uses its own Java downloader.
    Regards,
    Valdecir

  • Tools used for migration

    Hi Techies,
    Our system are on distributed environment. Planning to migrate from HP-UX to Linux.
    Our customer has decided to perform Oracle Golden Gate for DB migration, Can any one suggest if there are any other tools supported by SAP with minimum Zero Downtime.
    Also if any one can share how the Oracle Golden Gate for DB migration and Application migration be performed. I am a new bie to migration.
    Regards,
    SS

    Hi Sandeep,
    You can use Test Data Migration Server (TDMS) to transfer data from sender system to receiver system.
    You have the option of transferring data in reduced form based on 'time slice (TDTIM)' or 'time slice and company code (TDTCC)'.
    You can also copy the full data using the 'full transfer for client specific data' for SAP ERP , CRM, SCM, SRM, GTS.
    There's no downtime required in sender system for TDMS.
    The requirement from TDMS is that optimal number of background and dialog jobs must be available in the sender and receiver system to achieve better performance. Also the hardware should be good enough to support good performanece. You can get more details on this in note 890797.
    And the best results are achieved if the data is selected when the activity is minimum on the sender system. This is possible by executing the Data Selection activity during a lean period in the sender system.
    You can check further documents and guides related to TDMS in the below link
    http://scn.sap.com/community/test-data-migration-server
    Regards,
    Rupam

  • Tool used for monitoring Voice Gateways

    Hi,
    I would like to know which tools that are available to do realtime monitoring for cisco VoiceGateways AS5400.
    We would like to monitor trunk utilization/ number of active calls ...
    We need a real time monitoring capabilities.
    Thanks for the advise.
    rgds
    abdel

    you can start from here:
    http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00800b4cee.shtml
    goto MIB Locator, select the IOS version, then platform family, it will
    narrow down to a small number of MIB to choose from.
    and search for " number of calls" and check the box of " Include object
    descriptions in search"
    about 21 MIB objects are related. Each one can check the supported
    version of IOS.

  • Which monitor to use for graphic and web design?

    I've tried searching these forums in vain.
    I work as a Web/Graphic Designer and I've been using my ancient Samsung SyncMaster 740N plugged in to my Macbook-2.13GHz Intel Core 2 Duo for the last five or so years. I need to upgrade my monitor pronto.
    Any recommendations for 22-24 inch monitors? Btw, where do I check to see if my MB has DVI?
    I was thinking about the Samsung SyncMaster XL2370 or the Samsung P2370.

    I recently purchased, from BB, a Samsung 23" LED monitor that has made my life so much better! I intended to buy the new external monitor, but my MBP is two years old and not compatible with the monitors. The Samsung is comparable and far less pricey.

  • Polygonal lasso tool not working with stylus on Surface Pro 2

    Hi guys,
    I'm new here so please bare with me if I'm posting in the wrong place or don't make immediate sense.
    Hardeware / software used: surface pro 2 and I'm running photoshop CS5.
    Problem is a fairly basic one: I am trying to make basic selections using the polygonal lasso tool (using the stylus that comes with the tablet) but it simply will not work. All I get when I touch the stylus to the screen is the circle that appears then fades. If I attach the keypad and try using that then it works no problem at all.
    Does anyone have any ideas as to whether there is a particular setting that I need to switch on or off e.g. something relating to pressure sensitivity (although not sure why this would affect this particular selection tool)?
    I've searched the web and come up with nothing so far so any help is greatly appreciated!
    Thanks for your time
    Scott

    same problem on surface pro 3 !!!!
    and i think quite significant, for lot of artists using polygonal lasso a lot (including me). How come that the stupid surface cannot work properly

  • Cinema Tools use

    Can somebody explain to me what is Cinema Tools use for?
    I have been using FCP for some time now and never open Cinema Tools
    What does it do?
    thank you

    http://www.apple.com/finalcutstudio/finalcutpro/cinematools.html

  • Where can i find the magnetic lasso tool in adobe photoshop touch? i used it all the time before but suddenly cant find it please help

    i started my photoshop touch after some while and now i cant find the magnetic lasso tool it used to be there i used it all the time for editting but now i cant find it maybe i disabled it somehow. can anyone tell how to enable it again?

    I honestly don't remember a magnetic lasso tool. (I've been using PS Touch since version 1.0.) The closest things I can think of are the Quick Selection Tool, the Scribble Selection Tool and the Magic Wand Tool, all located under the same set of tools (3rd set from the top in the tool panel).

  • When using the lasso tools, how do i disengage from it, in order to adjust it?

    When i am in the process of creating a selection, with the lasso tools, I would like to disengage from the tool, briefly to adjust my selection and then to return and continue to make the selection.  If i press the space bar, it does disengage; but the hand tool becomes active at the same time. If i click on the options with the tool, to either add or subtract from the selection, as i drag the mouse to do this, i cause the tool to continue to outline, when i would like it to stop. It seems to remind me of when i used to use an old etcher sketcher magnetic drawing toy, from the late 1970's. ( if you are old enough to know what i mean that is)! Does anyone have a solution to this problem.

    The magnetic lasso tool is very useful and is suited admirably for selecting tiles or shingles. It is important to set up the tool for the task at hand. In the tool's option bar I start out with Feather=1px, check anti alias, Width=2px, Contrast=3%.
    If things don't go well, the first  change that I make is to the contrast setting and give it another try. One can back-track by hitting delete on the keyboard, left click to lay down one or more anchor points, then go on to circumnavigate the area to be selected.
    Now, after having made a complex selection, going to Layer>new>layer via copy puts the selection on its own layer, with surrounding transparency (checker-board pattern). One can use the eraser tool to tidy up, if required.
    I offer this as my workflow. Not infrequently there are several ways to do things in this program.

Maybe you are looking for