Is a little rattle in the sleep/wake button normal?
It's barely noticeable, only when I shake the phone, if I put my finger on the button and shake the sound is gone, should I be worried? It's the iphone 5s.
If you believe your Device to be Faulty... Return to Place of Purchase and have it evaluated. There is a 12 month Warranty.
Apple Warranty
http://www.apple.com/legal/warranty/
"Choose a product" and then "Choose a region"
Similar Messages
-
My daughter tried to play the My Horse game on her Ipod touch that she got for Christmas and when she opened the game it said something about sending "push notifications" and gave the choice of "don't allow" or "ok"...we chose "don't allow". After that the screen went white and now we cannot get the Ipod touch to respond to anything. I tried holding the sleep/wake button to try to restart it and it doesn't seem to work. Any suggestions to get this device working again???
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, try a Restore:
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
There's more that you can do. Post back if none of the above solves the problem.
By the way, I always allow "push." That allows the app developer to "push" information to your device rather than waiting for you to ask for it. However, "don't allow" shouldn't cause the problem that you're experiencing. -
My ipod touch is not recognized on itunes and will not turn on or even give me the battery sign that it is dead. I turned it off and it won't turn back on now. The screen is completely black and won't do anything. I have tried charging it over night and nothing happened. It was never near water. I have tried troubleshooting it by holding down the home button and the sleep/wake button, but nothing happened and it didn't work. What can I do to fix it?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591 -
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. -
Hello all,
I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
What I have tried so far to no avail:
Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
Tried this: iPod nano (6th generation): Hardware troubleshooting
Changed the watch face to display.
Recharged the device overnight (without full discharge).
Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
Regards,Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar -
My iPhone 4 will not power on. When connected to iTunes via my computer, it is recognized and shows fully charged battery. Pressing and holding the sleep/wake button does nothing; just a black screen. Any suggestions?
Only way is to bring it to the Apple Store and use the warranty if it hasn't expired
-
My ipad mini is frozen in an app and the home button is stuck. Pressing the wake/sleep button does not bring up the red slider to turn the ipad off. Is there any other way I can reset the ipad? Can I remove the battery? and then put it back in?
barbarafromnl wrote:
Can I remove the battery?
No the battery is non removable.
Try a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
If i reset my iphone using the home button and the sleep/wake button will my information like contacts,email,apps etc be lost??
No.
...JER -
My Iphone 5 has completly stopped working, have tried holding the sleep wake buttons etc but still no responce, there is an apple icon that appears but it then just goes agsin, any ideas.
see here
http://support.apple.com/kb/HT1808 -
Ok so my ipod touch just turned off by itself..again. I got it to work again last time cause the sleep/wake button still worked...Now it doesn't. What do I do?! I don't have money to get it repaired cause we all know Apple ain't cheap to fix! Any Suggestions will help!
Try:
- iOS: Not responding or does not turn on
Where it says use recovery mode use this program
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem -
The i pod is disabled I cant conect to i tunes because it says to enter password. I have followed the steps to try a hard reset by holding down just the sleep/wake button or that and home button till the slidder bar showes which is not happening it has the lock symbol in the middle top screen of the red bar so i cant even get it to unlock.... any suggestions on how to shut this thing off so i can get it into recovery mode to reset it?
Try placing the iPod in ecovery mode and then restoring the iPod via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Next would beto wait for the battery to fully drain and the charge and try again. -
My ipad 2 is wont turn on. I held the sleep/wake button down for 15 seconds and the battery image shows up for a second then the screen goes blank. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
my phone was showing the apple pic when i eraseed all content and settings so i did Pressed both home and sleep/wake buttons until the Apple logo appeared, then released the sleep/wake button and continued pressing the home button alone until iTunes detected the phone in Recovery Mode but an error is coming (1015) plz help me!!!!
plug into itunes and take it from there
http://support.apple.com/kb/HT1808 -
As above!
It's no possible to turn it off without the sleep/wake button. You can use the mute switch while at work and at night.
-
Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the reason I'd appreciate if you help how to fix it ...pleasa help me
Doing those doesn't turn off your phone?
As stated hold down the top button only until you see the red slider to power off your phone.
If that doesn't work then take it to Apple and see what they say.
Maybe you are looking for
-
I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody does
-
Important information regarding the Flex 2.0 runtime and UNIX
Hi, There's an issue with Flex 2.0 when the J2EE is installed on a UNIX server. upon deployment and running an iView, the runtime shows only a blank grey area. upon refreshing the browser, the iView is displayed as ussual. the source of this issue, a
-
Amount posted to difference account while inventory adjustement
Hello The scenario where we are facing the issue is, 1. Posting period for previous month was closed and accounts for the last month was closed. 2. To correct the wrong PO, we opened previous period, added inventory my physical inventroy method for G
-
I'm having trouble getting the CR2 files from my new Canon 7D Mark II camera to CS5/Bridge - it says the files are not supported by the installed version of RAW. The DNG Converter dos not seem to help (I noticed it works for CS6 & CC only) What nee
-
Stealth mode causing sleep trouble?
Hi, I have a Rev A. PB 12", and I recently decided to beef up my security, so I checked on all the options under the "Advanced" button of the Firewall pane - Blocking UDP, Firewall logging, and Stealth Mode. It seemed to have worked for a few days, b